|
ASTM F 1941/F1941M : 2016 : REDLINE
|
Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
|
SAE AS 1701 : 2017
|
LUBRICANT, SOLID FILM |
|
ASTM G 98 : 2017 : REDLINE
|
Standard Test Method for Galling Resistance of Materials |
|
SAE AMS S 8802 : 2015
|
SEALING COMPOUND, FUEL RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
|
MIL-PRF-81733 Revision D:1998
|
SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
|
SAE J 2295 : 2016
|
FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED) |
|
MIL-PRF-27617 Revision G:2011
|
GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT |
|
ASTM F 606/F606M : 2016 : REDLINE
|
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
|
IFI 100 107 : 2002
|
PREVAILING-TORQUE TYPE STEEL HEX AND HEX FLANGE NUTS REGULAR AND LIGHT HEX SERIES |
|
ASTM F 788 : 2013-04
|
SPECIFICATION FOR SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS, INCH AND METRIC SERIES |
|
ASTM E 384 : 2017 : REDLINE
|
Standard Test Method for Microindentation Hardness of Materials |
|
MIL-PRF-907 Revision F:2004
|
ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE |
|
MIL-PRF-17331 Revision K:2013
|
LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE |
|
DOD-PRF-24574 Base Document:1978
|
LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS MIXTURES |
|
SAE AMS 3090 : 2011
|
LUBRICANT, DRY FILM, HEAT CURED, FOR FASTENERS, POLYSULFIDE SEALANT COMPATIBLE |
|
NASM25027:2012
|
NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
|
MIL-L-8937 Revision D:1982
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, [NATO CODE NUMBER S 1738] |
|
NASM1312:2012
|
FASTENER TEST METHODS METHOD 11 TENSION FATIGUE |
|
MIL-L-23398 Revision D:1985
|
LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
|
NAS1283:2014
|
FASTENERS, MALE THREADED, SELF-LOCKING |
|
SAE AS 5272 : 2016
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION |
|
ASTM D 5363 : 2016 : REDLINE
|
Standard Specification for Anaerobic Single-Component Adhesives (AN) |
|
ASTM E 1417/E1417M : 2016 : REDLINE
|
Standard Practice for Liquid Penetrant Testing |
|
A-A-59691 Base Document:2001
|
SILICONE COMPOUND NATO CODE NUMBER S-736 |
|
SAE AMS 2518 : 2010(S2012)
|
THREAD COMPOUND, ANTI-SEIZE, GRAPHITE-PETROLATUM |
|
MIL-L-24131 Revision C:1995
|
LUBRICANT, COLLOIDAL GRAPHITE IN ISOPROPANOL |
|
MIL-L-24478 Revision C:1990
|
LUBRICANT, MOLYBDENUM DISULFIDE IN ISOPROPANOL |
|
ASTM F 2328 : 2017 : REDLINE
|
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
|
SAE AS 8660 : 1999
|
SILICONE COMPOUND NATO CODE NUMBER S-736 |
|
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
|
MIL-R-46082 Revision B:1983
|
RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC |
|
SAE J 122 : 2017
|
SURFACE DISCONTINUITIES ON NUTS |
|
SAE AMS M 7866 : 1998
|
MOLYBDENUM DISULFIDE, TECHNICAL, LUBRICATION GRADE |
|
ASTM A 574 : 2017 : REDLINE
|
Standard Specification for Alloy Steel Socket-Head Cap Screws |
|
MIL-DTL-18240 Revision F:1997
|
FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM |
|
A-A-59004 Revision A:1995
|
ANTI-GALLING COMPOUND, THREAD LUBRICATING, SEIZING RESISTANT, AND CALCIUM HYDROXIDE CONTAINING |
|
ASTM A 342/A342M : 2014 : REDLINE
|
Standard Test Methods for Permeability of Weakly Magnetic Materials |
|
A-A-59720 Base Document:2002
|
SEALING AND LOCKING COMPOUNDS, SINGLE-COMPONENT |
|
MIL L 46010 : D
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
|
MIL-HDBK-60 Base Document:1990
|
THREADED FASTENERS - TIGHTENING TO PROPER TENSION |
|
SAE AMS 2526 : 2013
|
MOLYBDENUM DISULFIDE COATING, THIN LUBRICATING FILM, IMPINGEMENT APPLIED |