|
ISO 16047:2005
|
Fasteners — Torque/clamp force testing |
|
SAE AS 1701 : 2017
|
LUBRICANT, SOLID FILM |
|
SAE AMS 2412 : 2015
|
PLATING, SILVER, COPPER STRIKE, LOW BAKE |
|
ISO 10683:2014
|
Fasteners Non-electrolytically applied zinc flake coatings |
|
ASTM G 98 : 2017 : REDLINE
|
Standard Test Method for Galling Resistance of Materials |
|
QQ-N-286 Revision G:2000
|
NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
|
NAS1351:2009
|
SCREW, CAP, SOCKET HEAD, UNDRILLED AND DRILLED, PLAIN AND SELF-LOCKING, ALLOY STEEL, CORROSION-RESISTANT STEEL AND HEAT-RESISTANT STEEL, UNRF-3A |
|
SAE AMS 2488 : 2000
|
ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
|
MIL-DTL-16232 Revision G:2000
|
PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
|
ASTM F 593 : 2017 : REDLINE
|
Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
|
SAE J 429 : 2014
|
MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS |
|
ASTM F 879 : 2015 : REDLINE
|
Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws |
|
ASTM A 380 : 2006
|
Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
|
NAS1283:2014
|
FASTENERS, MALE THREADED, SELF-LOCKING |
|
MIL-DTL-83488 Revision D:1999
|
COATING, ALUMINUM, HIGH PURITY |
|
ASTM A 563 : 2015 : REDLINE
|
Standard Specification for Carbon and Alloy Steel Nuts |
|
SAE J 2271 : 2009
|
SHIP SYSTEMS AND EQUIPMENT - PART STANDARD FOR STUDS - CONTINUOUS AND DOUBLE END (INCH SERIES) |
|
SAE J 2270 : 2016
|
SHIP SYSTEMS AND EQUIPMENT - THREADED FASTENERS - INSPECTION, TEST, AND INSTALLATION GUIDANCE |
|
ASTM A 453/A453M : 2017 : REDLINE
|
Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
|
ASTM F 2328 : 2017 : REDLINE
|
Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts |
|
MIL S 901 : D
|
SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
|
SAE J 2280 : 1996
|
SHIP SYSTEMS AND EQUIPMENT - FASTENERS - SELECTION AND IDENTIFICATION REQUIREMENTS |
|
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
|
ASTM A 449 : 2014 : REDLINE
|
Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
|
SAE J 2484 : 2012
|
FASTENER PART STANDARD - MACHINE SCREWS |
|
SAE AMS 2487 : 2000
|
ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS SOLUTION PH 12.4 MAXIMUM |
|
ASTM A 574 : 2017 : REDLINE
|
Standard Specification for Alloy Steel Socket-Head Cap Screws |
|
SAE AMS 2485 : 2016
|
COATING, BLACK OXIDE |
|
SAE J 2485 : 2012
|
FASTENER PART STANDARD - MACHINE SCREW NUTS (METRIC AND INCH) |
|
NAS1352:2014
|
SCREW, CAP, SOCKET HEAD, UNDRILLED AND DRILLED, PLAIN AND SELF-LOCKING, ALLOY STEEL, CORROSION-RESISTANT STEEL AND HEAT-RESISTANT STEEL, UNRC-3A AND UNRC-2A |
|
SAE J 995 : 2012
|
MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS |