|
ISO 272:1982
|
Fasteners — Hexagon products — Widths across flats |
|
ISO 15171-2:2016
|
Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure |
|
ISO 11926-2:1995
|
Connections for general use and fluid power Ports and stud ends with ISO 725 threads and O-ring sealing Part 2: Heavy-duty (S series) stud ends |
|
ISO 3601-5:2015
|
Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications |
|
ISO 16028:1999
|
Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications |
|
ISO 3601-2:2016
|
Fluid power systems — O-rings — Part 2: Housing dimensions for general applications |
|
ISO 8434-1:2007
|
Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
|
EN 10305-3:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
|
ISO 17635:2016
|
Non-destructive testing of welds — General rules for metallic materials |
|
SAE J 1926/3 : 2016
|
CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS |
|
SAE J 1475 : 2014
|
HYDRAULIC HOSE FITTING FOR MARINE APPLICATIONS |
|
ISO 5598:2008
|
Fluid power systems and components Vocabulary |
|
ISO 4399:1995
|
Fluid power systems and components Connectors and associated components Nominal pressures |
|
ISO 6605:2017
|
Hydraulic fluid power — Test methods for hoses and hose assemblies |
|
ISO 4397:2011
|
Fluid power connectors and associated components Nominal outside diameters of tubes and nominal hose sizes |
|
ASTM A 519/A519M : 2017 : REDLINE
|
Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
|
SAE J 1290 : 2012
|
AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC TUBE CONNECTIONS |
|
SAE J 2832 : 2009
|
WELDED FLASH CONTROLLED, HIGH STRENGTH (690 MPA TENSILE STRENGTH) LOW ALLOY STEEL HYDRAULIC TUBING, STRESS RELIEVED ANNEALED FOR BENDING AND DOUBLE FLARING |
|
ISO 9974-1:1996
|
Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports |
|
SAE J 2551/1 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION |
|
ISO 9974-3:1996
|
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
|
ISO 6150:1988
|
Pneumatic fluid power Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) Plug connecting dimensions, specifications, application guidelines and testing |
|
ISO 6149-4:2017
|
Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
|
SAE J 1453/2 : 2015
|
SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 2: REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, BRAZE-ON TUBE ENDS, CAPS, AND CONNECTORS WITH ISO 6149-2 METRIC STUD ENDS AND ISO 6162 4-BOLT FLANGE HEADS |
|
ISO 15171-1:1999
|
Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 1: Coupling not for connection under pressure |
|
SAE J 1273 : 2014
|
RECOMMENDED PRACTICES FOR HYDRAULIC HOSE ASSEMBLIES |
|
SAE J 2592 : 2013
|
CARBON STEEL TUBING FOR GENERAL USE - UNDERSTANDING NONDESTRUCTIVE TESTING FOR CARBON STEEL TUBING |
|
SAE J 1231 : 2016
|
FORMED TUBE ENDS FOR HOSE CONNECTIONS AND HOSE FITTINGS |
|
EN 10305-2:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
|
ISO 9974-2:1996
|
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
|
ISO 3305:1985
|
Plain end welded precision steel tubes — Technical conditions for delivery |
|
SAE J 1065 : 2016
|
NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING |
|
SAE J 1926/1 : 2016
|
CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING |
|
ISO 6162-2:2012
|
Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
|
SAE J 356 : 2013
|
WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING |
|
ISO 9974-4:2016
|
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
|
SAE J 518/3 : 2015
|
HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
|
ISO 8434-2:2007
|
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
|
SAE J 426 : 1991
|
LIQUID PENETRANT TEST METHODS |
|
EN 10305-4:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
|
SAE J 1453/3 : 2012
|
SPECIFICATION FOR O-RING FACE SEAL CONNECTORS: PART 3 - REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, CAPS, AND CONNECTORS WITH SAE J1926-2 INCH STUD ENDS |
|
ASTM D 2247 : 2015 : REDLINE
|
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
|
ISO 6149-3:2006
|
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
|
ISO 6072:2011
|
Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
|
SAE J 246 : 2012
|
SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS |
|
SAE J 2593 : 2015
|
INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
|
SAE J 343 : 2016
|
TEST AND TEST PROCEDURES FOR SAE 100R SERIES HYDRAULIC HOSE AND HOSE ASSEMBLIES |
|
SAE J 2614 : 2009
|
WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING |
|
SAE J 515 : 2015
|
SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
|
SAE J 1453/1 : 2012
|
SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 1: TUBE CONNECTION DETAILS AND COMMON REQUIREMENTS FOR PERFORMANCE AND TESTS |
|
ISO 8434-3:2005
|
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
|
ISO 6162-1:2012
|
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
|
ISO 19879:2010
|
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
|
SAE J 2094 : 2001
|
VEHICLE & CONTROL MODIFICATIONS FOR DRIVERS WITH PHYSICAL DISABILITIES - TERMINOLOGY |
|
ISO 6149-2:2006
|
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
|
SAE J 2435 : 2015
|
WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING |
|
ISO 4200:1991
|
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
|
SAE J 518/1 : 2013
|
HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
|
SAE J 514 : 2012
|
HYDRAULIC TUBE FITTINGS |
|
SAE J 526 : 2016
|
WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING |
|
ISO 6149-1:2006
|
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal |
|
ISO 3457:2003
|
Earth-moving machinery Guards Definitions and requirements |
|
ISO 6164:1994
|
Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
|
SAE J 527 : 2013
|
BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING |
|
ISO 3304:1985
|
Plain end seamless precision steel tubes — Technical conditions for delivery |
|
SAE J 525 : 2016
|
WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
|
ISO 7241:2014
|
Hydraulic fluid power — Dimensions and requirements of quick-action couplings |
|
ISO 273:1979
|
Fasteners Clearance holes for bolts and screws |
|
SAE J 1677 : 2016
|
TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING |
|
SAE J 524 : 2016
|
SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING |
|
ISO 3601-4:2008
|
Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings) |
|
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests |
|
ISO 10763:1994
|
Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures |
|
ISO 11926-3:1995
|
Connections for general use and fluid power Ports and stud ends with ISO 725 threads and O-ring sealing Part 3: Light-duty (L series) stud ends |
|
SAE J 2467 : 2015
|
WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING |
|
ISO 3601-1:2012
|
Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
|
AWS D1.1/D1.1M : 2015
|
STRUCTURAL WELDING CODE-STEEL |
|
SAE J 2044 : 2009
|
QUICK CONNECT COUPLING SPECIFICATION FOR LIQUID FUEL AND VAPOR/EMISSIONS SYSTEMS |
|
ASTM A 554 : 2016 : REDLINE
|
Standard Specification for Welded Stainless Steel Mechanical Tubing |
|
ASTM A 312/A312M : 2017-03
|
SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
|
SAE J 1926/2 : 2016
|
CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
|
ISO 3601-3:2005
|
Fluid power systems O-rings Part 3: Quality acceptance criteria |
|
SAE J 533 : 2017
|
FLARES FOR TUBING |
|
SAE J 2551/2 : 2013
|
RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
|
ISO 2944:2000
|
Fluid power systems and components — Nominal pressures |
|
ISO 3448:1992
|
Industrial liquid lubricants — ISO viscosity classification |
|
SAE J512 : 1997
|
AUTOMOTIVE TUBE FITTINGS |
|
ISO 6743-4:2015
|
Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
|
SAE J 2613 : 2009
|
WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING |
|
ISO 11926-1:1995
|
Connections for general use and fluid power Ports and stud ends with ISO 725 threads and O-ring sealing Part 1: Ports with O-ring seal in truncated housing |
|
SAE J 2833 : 2009
|
WELDED AND COLD-DRAWN, HIGH STRENGTH (690 MPA TENSILE STRENGTH) LOW ALLOY STEEL HYDRAULIC TUBING, STRESS RELIEVED ANNEALED FOR BENDING AND FLARING |