EN ISO 4628-2:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
|
EN 485-1:2016
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
|
ISO 6272-2:2011
|
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter
|
EN 13523-10:2017
|
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
|
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
|
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
|
EN 13523-6:2002
|
Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
|
ISO 4623-2:2016
|
Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates
|
ISO 6270-1:1998
|
Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation
|
EN 485-4:1993
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
|
ASTM D 660 : 1993
|
Standard Test Method for Evaluating Degree of Checking of Exterior Paints
|
ISO 1520:2006
|
Paints and varnishes Cupping test
|
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature
|
EN 13523-3:2014
|
Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
|
EN ISO 7253 : 2001
|
PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
|
EN ISO 4628-4:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
|
EN 13523-21:2017
|
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
|
ISO 4628-4:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking
|
EN 12258-1:2012
|
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
|
ISO 7253:1996
|
Paints and varnishes — Determination of resistance to neutral salt spray (fog)
|
EN 13523-22:2017
|
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
|
ISO 4628-5:2016
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
|
EN 541:2006
|
Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications
|
EN ISO 4628-6:2011
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011)
|
EN 3665 : 1997
|
AEROSPACE SERIES - TEST METHODS FOR PAINTS AND VARNISHES - FILIFORM CORROSION RESISTANCE TEST ON ALUMINIUM ALLOYS
|
EN 515:2017
|
Aluminium and aluminium alloys - Wrought products - Temper designations
|
EN ISO 1520:2006
|
Paints and varnishes - Cupping test (ISO 1520:2006)
|
EN 13523-19:2011
|
Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
|
EN 13523-8:2017
|
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
|
ISO 6272-1:2011
|
Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter
|
EN 13523-7:2014
|
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
|
EN 13523-1:2017
|
Coil coated metals - Test methods - Part 1: Film thickness
|
ISO 4628-6:2011
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
|
ISO 1519:2011
|
Paints and varnishes Bend test (cylindrical mandrel)
|
EN ISO 6272-2:2011
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
|
EN ISO 1519:2011
|
Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
|
EN ISO 4628-5:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
|
EN 13523-4:2014
|
Coil coated metals - Test methods - Part 4: Pencil hardness
|
EN 13523-2:2014
|
Coil coated metals - Test methods - Part 2: Gloss
|
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
|
EN 573-3:2013
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
|
EN ISO 6272-1:2011
|
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
|
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
|