Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

UNE-EN 1776:2017

Current
Current

The latest, up-to-date edition.

Gas infrastructure - Gas measuring systems - Functional requirements
Available format(s)

Hardcopy , PDF

Language(s)

Spanish, Castilian, English

Published date

01-02-2017

Committee
CTN 60
DocumentType
Standard
Pages
100
PublisherName
Asociacion Espanola de Normalizacion
Status
Current
Supersedes

Standards Relationship
NF EN 1776 : 2016 Identical
NBN EN 1776 : 2016 Identical
NEN EN 1776 : 2016 Identical
NS EN 1776 : 1998 Identical
I.S. EN 1776:2015 Identical
SN EN 1776 : 2016 Identical
UNI EN 1776 : 2004 Identical
BS EN 1776:2015 Identical
EN 1776:2015 Identical
DIN EN 1776:2016-05 Identical

EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 12327:2012 Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
EN ISO 15796:2008 Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005)
ISO 10715:1997 Natural gas — Sampling guidelines
EN ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 12405-1:2005+A2:2010 Gas meters - Conversion devices - Part 1: Volume conversion
EN ISO 13443:2005 Natural gas - Standard reference conditions (ISO 13443:1996 including Corrigendum 1:1997)
EN 12007-3:2015 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
EN ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003)
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
CEN/CLC/ETSI TR 50572:2011 Functional Reference Architecture for Communications in Smart Metering Systems
EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
ISO 15971:2008 Natural gas Measurement of properties Calorific value and Wobbe index
EN 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
ISO 5168:2005 Measurement of fluid flow — Procedures for the evaluation of uncertainties
EN 60079-29-1:2016 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
ISO 10723:2012 Natural gas Performance evaluation for analytical systems
IEC 60079-17:2013 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
ISO/IEC Guide 98-1:2009 Uncertainty of measurement — Part 1: Introduction to the expression of uncertainty in measurement
EN 12007-1:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements
ISO 15796:2005 Gas analysis Investigation and treatment of analytical bias
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 1594:2013 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
2004/22/EC : 2004 DIRECTIVE 2004/22/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 31 MARCH 2004 ON MEASURING INSTRUMENTS
EN 24006:1993 Measurement of fluid flow in closed conduits - Vocabulary and symbols (ISO 4006:1991)
ISO 12213-3:2006 Natural gas Calculation of compression factor Part 3: Calculation using physical properties
ISO/IEC Guide 98-4:2012 Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment
2004/108/EC : 2004 DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC
IEC 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
ISO 6975:1997 Natural gas — Extended analysis — Gas-chromatographic method
EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
EN 15001-2:2008 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
ISO 6143:2001 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
EN 12279:2000/A1:2005 GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS
ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates
ISO 15970:2008 Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor
EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003)
EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
ISO 13443:1996 Natural gas Standard reference conditions
OIML R 137-1 : 2006 GAS METERS - PART 1: REQUIREMENTS
ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006)
ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
ISO 10790:2015 Measurement of fluid flow in closed conduits Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
EN ISO 6141:2015 Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015)
ISO 9001:2015 Quality management systems — Requirements
EN 1359:2017 Gas meters - Diaphragm gas meters
EN ISO 6975:2005 Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997)
EN 12007-2:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar)
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
ISO 12213-1:2006 Natural gas Calculation of compression factor Part 1: Introduction and guidelines
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
CEN/CLC/ETSI/TR 50572 : 2011 FUNCTIONAL REFERENCE ARCHITECTURE FOR COMMUNICATIONS IN SMART METERING SYSTEMS
ISO 15112:2011 Natural gas Energy determination
EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
ISO 6142-1:2015 Gas analysis Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures
EN 12007-4:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation
ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement
EN ISO 6976:2016 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
EN ISO 10715:2000 Natural gas - Sampling guidelines (ISO 10715:1997)
EN ISO 12213-2:2009 Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006)
ISO 2186:2007 Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements
EN ISO 12213-1:2009 Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines (ISO 12213-1:2006)
ISO 6141:2015 Gas analysis Contents of certificates for calibration gas mixtures
ISO 12213-2:2006 Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis
EN 12405-2:2012 Gas meters - Conversion devices - Part 2: Energy conversion
OIML R 140 : 2007 MEASURING SYSTEMS FOR GASEOUS FUEL
EN 14236:2007 Ultrasonic domestic gas meters
ISO 4006:1991 Measurement of fluid flow in closed conduits — Vocabulary and symbols
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
EN 16314:2013 Gas meters - Additional functionalities
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
EN ISO 10723:2012 Natural gas - Performance evaluation for analytical systems (ISO 10723:2012)
EN 12186:2014 Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements

View more information
$233.28
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more