|
ISO 3016:1994
|
Petroleum products Determination of pour point
|
|
ISO 2719:2016
|
Determination of flash point — Pensky-Martens closed cup method
|
|
EN 60156:1995
|
Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
|
|
IEC 62021-1:2003
|
Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration
|
|
EN 60422:2013
|
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
|
|
IEC 62021-2:2007
|
Insulating liquids - Determination of acidity - Part 2: Colourimetric titration
|
|
IEC 61125:1992
|
Unused hydrocarbon based insulating liquids - Test methods for evaluating the oxidation stability
|
|
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
|
|
EN ISO 3104:1996
|
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994)
|
|
IEC 60422:2013
|
Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
|
|
IEC 60156:1995
|
Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
|
|
EN 61125:1993/A1:2004
|
UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY
|
|
EN ISO 12185:1996
|
Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
|
|
EN 14210 : 2003
|
SURFACE ACTIVE AGENTS - DETERMINATION OF INTERFACIAL TENSION OF SOLUTIONS OF SURFACE ACTIVE AGENTS BY THE STIRRUP OR RING METHOD
|
|
EN 61619:1997
|
Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography
|
|
HD 488 : 200S3
|
GASSING OF INSULATING LIQUIDS UNDER ELECTRICAL STRESS AND IONIZATION
|
|
ISO 6247:1998
|
Petroleum products — Determination of foaming characteristics of lubricating oils
|
|
EN ISO 14596:2007
|
Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007)
|
|
IEC 62535:2008
|
Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil
|
|
IEC 60475:2011
|
Method of sampling insulating liquids
|
|
EN 61620:1999
|
Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
|
|
IEC 61868:1998
|
Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
|
|
EN ISO 3675:1998
|
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
|
|
EN 61198:1994
|
Mineral insulating oils - Methods for the determination of 2-furfural and related compounds
|
|
EN 60814:1997
|
Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration
|
|
EN 62021-2 : 2007
|
INSULATING LIQUIDS - DETERMINATION OF ACIDITY - PART 2: COLOURIMETRIC TITRATION
|
|
EN 62535:2009
|
Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil
|
|
EN 60970:2007/corrigendum:2008
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES
|
|
ISO 12185:1996
|
Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method
|
|
IEC 60970:2007
|
Insulating liquids - Methods for counting and sizing particles
|
|
IEC 62697-1:2012
|
Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
|
|
EN 60247:2004
|
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
|
|
IEC 60666:2010
|
Detection and determination of specified additives in mineral insulating oils
|
|
IEC 61620:1998
|
Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
|
|
IEC 60867:1993
|
Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons
|
|
IEC 60814:1997
|
Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration
|
|
IEC 60076-2:2011
|
Power transformers - Part 2: Temperature rise for liquid-immersed transformers
|
|
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
|
|
IEC 60247:2004
|
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
|
|
EN 61868:1999
|
Mineral insulating oils - Determination of kinematic viscosity at very low temperatures
|
|
ISO 14596:2007
|
Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry
|
|
ASTM D 7150 : 2013 : REDLINE
|
Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress
|
|
IEC 61619:1997
|
Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography
|
|
EN 60076-2:2011
|
Power transformers - Part 2: Temperature rise for liquid-immersed transformers
|
|
IEC 61198:1993
|
Mineral insulating oils - Methods for the determination of 2-furfural and related compounds
|
|
EN 62021-1:2003
|
Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration
|
|
EN 60475 : 2011
|
Method of sampling insulating liquids
|
|
EN 60666 : 2010
|
DETECTION AND DETERMINATION OF SPECIFIED ADDITIVES IN MINERAL INSULATING OILS
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.