Name: UNI EN 12201-3 : 2013
Brand: UNI

PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 3: FITTINGS

Published date

10-01-2013

Publisher

Ente Nazionale Italiano di Unificazione (UNI)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
4 Material
5 General characteristics
6 Geometrical characteristics
7 Mechanical characteristics
8 Physical characteristics
9 Chemical resistance of fittings in contact with
   chemicals
10 Performance requirements
11 Marking
12 Delivery Conditions
Annex A (normative) - Socket fusion fittings
Annex B (normative) - Fabricated fittings
Annex C (informative) - Examples of typical terminal
        connection for electrofusion fittings
Annex D (normative) - Short-term pressure test method
Annex E (normative) - Tensile test for fitting/pipe
        assemblies
Bibliography

Committee	SC 8
DevelopmentNote	Supersedes UNI 10910-3. (07/2004) Supersedes UNI EN 13244-3. (04/2012)
DocumentType	Standard
ProductNote	Italian version is available for this standard
PublisherName	Ente Nazionale Italiano di Unificazione (UNI)
Status	Current
Supersedes	UNI EN 12201-3 : 2012 UNI 10910-3 : 2001

Standards	Relationship
ONORM EN 12201-3 : 2013	Identical
BS EN 12201-3 : 2011	Identical
NBN EN 12201-3 : 2011 + A1 2013	Identical
NF EN 12201-3 : 2011 + A1 2013	Identical
NS EN 12201-3 : 2011 + A1 2012	Identical
DIN EN 12201-3:2013-01	Identical
NEN EN 12201-3 : 2011 + A1 2012	Identical
I.S. EN 12201-3:2011	Identical
SN EN 12201-3+A1:2013	Identical
EN 12201-3:2011+A1:2012	Identical
UNE-EN 12201-3:2012	Identical

UNI 9736 : 2014	FITTINGS MANUFACTURED WITH MIXED JUNCTION, METAL-POLYETHYLENE, FOR USE IN PIPELINES FOR THE SUPPLY OF GASEOUS FUELS, WATER AND OTHER FLUIDS UNDER PRESSURE AND METAL-POLYPROPYLENE PIPES FOR WATER SUPPLY AND OTHER FLUIDS UNDER PRESSURE - REQUIREMENTS, TESTING, FITNESS FOR PURPOSE AND ASSESSMENT OF CONFORMITY
UNI TR 11288 : 2008	PLASTICS PIPING PRESSURE SYSTEMS FOR THE CONVEYANCE OF FLUIDS - POLYETHYLENE (PE) - FABRICATED FITTINGS
UNI 10521 : 2012	WELDING OF PLASTIC MATERIALS - ELECTRO-FUSION WELDING - WELDING OF POLYETHYLENE PIPES AND/OR FITTINGS FOR GAS, WATER AND OTHERS PRESSURE FLUIDS PIPELINES
UNI 10520 : 2009	WELDING OF PLASTIC MATERIALS - HEATED TOOL BUTT WELDING - WELDING OF POLYETHYLENE PIPES AND/OR FITTINGS FOR GAS, WATER AND OTHERS PRESSURE FLUIDS PIPELINES
UNI 10761 : 2012	COORDINATION OF WELDING, PIPE LAYING AND TEST ACTIVITIES FOR POLYETHYLENE TRANSMISSION LINES OF GASEOUS FUELS, WATER AND OTHER FLUIDS UNDER PRESSURE - TASKS AND RESPONSIBILITIES, REQUIREMENTS FOR TRAINING, QUALIFICATION AND CERTIFICATION OF PERSONNEL
UNI 11466 : 2012	HEAT PUMP GEOTHERMAL SYSTEMS - DESIGN AND SIZING REQUIREMENTS

EN ISO 3126:2005	Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
ISO/TR 10358:1993	Plastics pipes and fittings Combined chemical-resistance classification table
EN 681-1:1996/A3:2005	ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
ISO 13953:2001	Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
ISO 13956:2010	Plastics pipes and fittings Decohesion test of polyethylene (PE) saddle fusion joints Evaluation of ductility of fusion joint interface by tear test
89/106/EEC : 1988	COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
EN ISO 1167-1:2006	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
ISO 1167-4:2007	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assemblies
ISO 12176-1:2017	Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
ISO 4433-1:1997	Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method
IEC 60364-1:2005	Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
EN 1716:1997	Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee
CEN/TR 15438:2007	Plastics piping systems - Guidance for coding of products and their intended uses
ISO 3126:2005	Plastics piping systems Plastics components Determination of dimensions
ISO 11922-1:1997	Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
EN ISO 1167-4:2007	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
ISO 14236:2000	Plastics pipes and fittings Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
EN 12201-5:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
ISO 4433-2:1997	Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes
ISO 1167-3:2007	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3: Preparation of components
ISO 13954:1997	Plastics pipes and fittings Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 13955:1997	Plastics pipes and fittings Crushing decohesion test for polyethylene (PE) electrofusion assemblies
EN 12201-2:2011+A1:2013	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
ISO 11357-6:2008	Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
EN 60335-1:2012/A13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
ISO 9624:1997	Thermoplastics pipes for fluids under pressure Mating dimensions of flange adapters and loose backing flanges
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN ISO 1133:2005	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
ISO 4059:1978	Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements
ISO 13950:2007	Plastics pipes and fittings Automatic recognition systems for electrofusion joints
EN 12201-1:2011	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
ISO 1133:2005	Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 13951:2015	Plastics piping systems Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
CEN/TS 12201-7:2014	Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
EN ISO 1167-3:2007	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
ISO 1167-1:2006	Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method