Name: UNI EN 12418 : 2009
Brand: UNI

UNI EN 12418 : 2009

Superseded

View Superseded by

MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY

Superseded date

22-06-2022

Published date

01-01-2009

Publisher

Ente Nazionale Italiano di Unificazione (UNI)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
  5.1 Mechanical hazard
  5.2 Electrical hazards
  5.3 Thermal hazards
  5.4 Exhaust fumes (and gas)
  5.5 Fluid containers
  5.6 Protection against water splashes
  5.7 Rotational speed
  5.8 Noise
  5.9 Maintenance
6 Verification of safety requirements and/or measures
7 Information for use
  7.1 Marking
  7.2 Accompanying documents
Annex A (normative) Noise test code - Grade 2 of accuracy
Annex B (normative) Dimensions of the flanges for cutting-
        off diamond wheel
Annex C (normative) Strength of guards - State of the art
        concerning the characteristics of guards used with
        cutting-off wheels
Annex D (normative) Pictograms
Annex E (normative) Verification of surface temperature
Annex F (normative) Vibration test code
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC, amended by 98/79/EC
Annex ZB (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

Relates to transportable masonry and stone cutting-off machines stationary during work, principally used on job site building construction for cutting-off stones, other mineral construction materials and composite materials having at least one supporting surface.

DocumentType	Standard
PublisherName	Ente Nazionale Italiano di Unificazione (UNI)
Status	Superseded
SupersededBy	UNI EN 12418:2022
Supersedes	UNI EN 12418 : 2001

Standards	Relationship
SN EN 12418 : 2000 + A1 2009	Identical
NBN EN 12418 : 2000 + A1 2009	Identical
EN 12418:2000+A1:2009	Identical
NS EN 12418 : 2000 + A1 2009	Identical
ONORM EN 12418 : 2009	Identical
I.S. EN 12418:2000	Identical
NF EN 12418 : 2000 + A1 2009	Identical
NEN EN 12418 : 2000 + A1 2009	Identical
DIN EN 12418:2010-03	Identical
BS EN 12418 : 2000	Identical
UNE-EN 12418:2001	Identical

EN 12096:1997	Mechanical vibration - Declaration and verification of vibration emission values
PREN ISO 3744 : DRAFT 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHOD IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ISO 4871:1996	Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 5349-2:2001	Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace
ISO 20643:2005	Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
ISO 13732-1:2006	Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 349:1993+A1:2008	Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 13218:2002+A1:2008/AC:2010	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
EN ISO 13857:2008	Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
IEC 61029-1:1990	Safety of transportable motor-operated electric tools - Part 1: General requirements
EN ISO 5349-2:2001/A1:2015	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349 2:2001/AMD 1:2015)
EN ISO 13732-1:2008	Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN ISO 20643:2008/A1:2012	Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)
EN ISO 11201:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN ISO 8041:2005/AC:2008	HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
ISO 16063-1:1998	Methods for the calibration of vibration and shock transducers Part 1: Basic concepts
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
ISO 8041:2005	Human response to vibration Measuring instrumentation
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008	Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100-2:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 5348:1998	Mechanical vibration and shock Mechanical mounting of accelerometers
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 60335-1:2012/A13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 61029-1:2009/A11:2010	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000:2014	Graphical symbols for use on equipment Registered symbols
EN ISO 11688-1:2009	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN 60335-2-41:2003/A2:2010	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
ISO/TR 11688-2:1998	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
ISO 11201:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 60335-2-41:2012	Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps