Name: UNI EN 746-1 : 2009
Brand: UNI

INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT

Published date

08-10-2009

Publisher

Ente Nazionale Italiano di Unificazione (UNI)

Foreword
Introduction
1 Scope
2 Normative references
  2.1 Basic Standards
  2.2 Group Safety Standards
  2.3 Product Safety Standards
3 Definitions
4 List of Hazards
5 Safety requirements, measures and verification means
  5.1 General
  5.2 Mechanical
  5.3 Electrical
  5.4 Thermal
  5.5 Noise
  5.6 Vibration
  5.7 Radiation
  5.8 Materials and substances
  5.9 Ergonomics
  5.10 Hazard combination
  5.11 Malfunction
  5.12 Missing and incorrectly fitted safety devices
6 Information for use
  6.1 General
  6.2 Marking
  6.3 Technical Data, Installation and Commissioning
  6.4 Instruction Handbook (Operation)
  6.5 Instruction Handbook (Maintenance)
  6.6 Instruction handbook (De-commissioning)
Annex A (informative) - List of Industrial Thermoprocessing
        Equipment covered by EN 746-1
Annex B (informative) - Typical test report (as described
        in 6.3.10)
Annex C (informative) - PERMIT to work certificate (as
        described in 6.5.8)
Annex D (informative) - Used Definitions
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC

Describes common safety requirements for industrial thermoprocessing equipment (for example industrial furnaces and industrial heating equipment), which meets the definition for machinery given in EN ISO 12100-1: 2003

DevelopmentNote	REPLACES WITH PTS 2 & 3 UNI 7728
DocumentType	Standard
PublisherName	Ente Nazionale Italiano di Unificazione (UNI)
Status	Current
Supersedes	UNI EN 746-1 : 1998 UNI 7728 : 1990

Standards	Relationship
SN EN 746-1 : 1997 + A1 2010	Identical
DIN EN 746-1:2010-02	Identical
I.S. EN 746-1:1997	Identical
NBN EN 746-1 : 1997 + A1 2009	Identical
BS EN 746-1 : 1997	Identical
NF EN 746-1 : 1997 + A1 2009	Identical
UNE-EN 746-1:1997	Identical
NEN EN 746-1 : 1997 + A1 2010	Identical
NS EN 746-1 : 1997 + A1 2009	Identical
EN 746-1:1997+A1:2009	Identical

EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
IEC 60364-4-43:2008	Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent
EN 982:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 1037:1995+A1:2008	Safety of machinery - Prevention of unexpected start-up
EN 547-2:1996+A1:2008	Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
IEC 60519-3:2005	Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations
EN 60825-1:2014/AC:2017-06	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
EN 746-2:2010	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 1088:1995+A2:2008	Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
IEC 61310-2:2007	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
EN 981:1996+A1:2008	Safety of machinery - System of auditory and visual danger and information signals
IEC 60364-4-41:2005+AMD1:2017 CSV	Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
EN 61310-2:2008	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
ISO 13732-1:2006	Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
ISO 7243:2017	Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index
EN 349:1993+A1:2008	Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60519-7:2008	Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns
EN 1299:1997+A1:2008	Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 547-1:1996+A1:2008	Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
IEC 60519-8:2005	Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces
EN ISO 13850:2015	Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
IEC 60825-1:2014	Safety of laser products - Part 1: Equipment classification and requirements
IEC 60519-6:2011	Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment
IEC 60519-2:2006	Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment
EN ISO 7731:2008	Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
EN 614-1:2006+A1:2009	Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 13857:2008	Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN 60519-6:2011	Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment
ISO 7731:2003	Ergonomics Danger signals for public and work areas Auditory danger signals
EN 746-8 : 2000	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT
EN ISO 13732-1:2008	Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 746-4 : 2000	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 4: PARTICULAR REQUIREMENTS FOR HOT DIP GALVANIZING THERMOPROCESSING EQUIPMENT
EN 60519-1:2015	Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
ISO 11690-2:1996	Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures
IEC 60405:2003	Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN 746-3:1997+A1:2009	Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
IEC 60364-4-44:2007+AMD1:2015 CSV	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
EN 842:1996+A1:2008	Safety of machinery - Visual danger signals - General requirements, design and testing
EN 60519-4:2013	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS (IEC 60519-4:2013)
ISO 7933:2004	Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
EN 60519-3:2005	Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 13857:2008	Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
EN ISO 12100-2:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN ISO 11690-2 : 1996	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL MEASURES
EN 746-5 : 2000	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 5: PARTICULAR SAFETY REQUIREMENTS FOR SALT BATH THERMOPROCESSING EQUIPMENT
EN 60519-8:2005	Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces
EN 983:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 60519-9:2005	Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 13849-1:2015	Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
ISO 13850:2015	Safety of machinery Emergency stop function Principles for design
IEC 61310-1:2007	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 626-1:1994+A1:2008	Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
PREN 746-7 : DRAFT 1994	INDUSTRIAL THERMOPROCESSING EQUIPMENT - SPECIAL SAFETY REQUIREMENTS FOR VACCUUM THERMOPROCESSING EQUIPMENT
ISO 7000:2014	Graphical symbols for use on equipment Registered symbols
EN 1547:2001+A1:2009	Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
IEC 60519-9:2005	Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 61310-1:2008	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
IEC TS 60519-5:2008	Safety in electroheat installations - Part 5: Specifications for safety in plasma installations
IEC 60519-1:2015	Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 60519-2:2006	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 2: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT
IEC 60519-4:2013	Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS