VDE 0118-2 : 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 2: ZUSATZFESTLEGUNGEN
01-11-2016
12-01-2013
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Elektrische Maschinen
5 Arbeitsmagnete
6 Leistungstransformatoren
7 Induktive Spannungswandler
8 Kondensatoranlagen
9 Schweissgeräte
10 Heiz- und Widerstandsgeräte
11 Ortsveränderliche Betriebsmittel
12 Schalter und Schaltgeräte
13 Fernbetätigte Schaltgeräte
14 Sicherungen
15 Steckvorrichtungen und Steckverbinder
16 Schaltanlagen
17 Trennvorrichtungen vor Schaltanlagen
18 Hilfsstromkreise
19 Leuchten und Beleuchtungsanlagen
20 Kabel und Leitungen
21 Schutz elektrischer Betriebsmittel gegen Überströme
22 Kurzschlussstromberechnung
23 Sprengzündanlagen mit Netzverbindung
24 Stromrichter
25 Zusätzliche Anforderungen an Netze und Betriebsmittel
mit einer Nennspannung über 1 kV bis 6 kV in Abbau-
und Ortsbetrieben
26 Grubenverkehrs-Signalanlagen
Anhang A (normativ) Strombelastbarkeit von Leitern eines
Kabels oder einer Leitung in Fernmeldeanlagen in
Abhängigkeit von der Umgebungstemperatur und
bei gleichzeitig dauernd belasteten Leitern
Anhang B (normativ) Strombelastbarkeit von gebündelten
PVC-Aderleitungen in Gehäusen oder in
Elektro-Installationskanälen, in Abhängigkeit
vom Nennquerschnitt bei einer Umgebungstemperatur
von 40 grad C und dauernder Belastung
Anhang C (informativ) Ausführungsbeispiele für ein galvanisch
getrenntes Netz in Abbau- und Ortsbetrieben
Bilder
Tabellen
Diese Norm regelt Zusatzfestlegungen für bestimmte Anlagen und Betriebsmittel.
| DevelopmentNote |
Supersedes VDE V 0118-2. (02/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Verband Deutscher Elektrotechniker
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN VDE 0118-2 : 2010 | Identical |
| VDE 0118-1 : 2010 | ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 1: ALLGEMEINE FESTLEGUNGEN |
| VDE 0118-3 : 2001 | ERECTION OF POWER INSTALLATIONS IN MINES - SUPPLEMENTARY REQUIREMENTS FOR TELECOMMUNICATION INSTALLATIONS |
| VDE 0102 : 2016 | SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS (IEC 60909-0:2016) |
| VDE 0118-1 : 2010 | ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 1: ALLGEMEINE FESTLEGUNGEN |
| VDE 0250-809 : 1985 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT ORDINARY TOUGH-POLYCHLOROPRENE-SHEATHED FLEXIBLE CABLE |
| VDE 0670-1000 : 2002 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR STANDARDS |
| VDE 0250-204 : 2000 | |
| VDE 0105-111 : 2000 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 111: PARTICULAR REQUIREMENTS FOR UNDERGROUND MINES |
| DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| DIN EN 60694 : 2002 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR STANDARDS |
| VDE 0560-410 : 2015 | SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V - PART 1: GENERAL (IEC 60871-1:2014) |
| DIN VDE 0250-813 : 1985 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION; TRAILING CABLE |
| VDE 0623-1 : 2013 COR 1 2014 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 + A1:2005 + A2:2012) |
| VDE 0282-6 : 2005 | STARKSTROMLEITUNGEN MIT VERNETZTER ISOLIERHUELLE FUER NENNSPANNUNGEN BIS 450/750 V - TEIL 6: LICHTBOGENSCHWEISSLEITUNGEN |
| VDE 0298-4 : 2013 | Application of cables and cords in power installations – Part 4: Recommended current-carrying capacity for sheathed and nonsheathed cables for fixed wirings in and around buildings and for flexible cables and cords<br> |
| DIN VDE 0472-803 : 1986 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS - OIL IMMERSION |
| DIN EN 60076-1 : 2012 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| DIN EN 60974-1 : 2013 | ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012) |
| DIN VDE 0250-602 : 1985 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION; SPECIAL RUBBER-INSULATED SINGLE-CORE CABLES |
| VDE 0271 : 2007 COR 1 2008 | STARKSTROMKABEL - FESTLEGUNGEN FUER STARKSTROMKABEL AB 0,6/1 KV FUER BESONDERE ANWENDUNGEN |
| VDE 0670-6 : 98 COR 2 2001 | AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
| DIN EN 50178 : 1998-04 | ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| VDE 0291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES - CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| VDE 0250-813 : 1985 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - TRAILING CABLE |
| VDE 0276-1000 : 1995 | POWER CABLES - CURRENT-CARRYING CAPACITY, GENERAL, CONVERSION FACTORS |
| VDE 0160 : 1998-04 | ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
| VDE 0279 : 1982 | ACCESSORIES FOR UNDERGROUND MINING CABLES - JOINT BOXED U[0]/U = 0.6/1 KV |
| DIN EN 60742 : 1995 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
| DIN VDE 0250-812 : 1985 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION; RUBBER INSULATED FLEXIBLE CABLE NSSHOEU |
| VDE 0660-500 : 2005 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES |
| DIN VDE 0276-1000 : 1995 | POWER CABLES - PART 1000: CURRENT-CARRYING CAPACITY, GENERAL, CONVERSION FACTORS |
| VDE 0281-3 : 2001 AMD 2 2009 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON SHEATHED CABLES FOR FIXED WIRING |
| DIN VDE 0250-809 : 1985 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION; FLAT ORDINARY TOUGH-POLYCHLOREPRENE-SHEATHED FLEXIBLE CABLE |
| VDE 0532-101 : 97 AMD 1 2001 | POWER TRANSFORMERS - PART 1: GENERAL |
| VDE 0250-602 : 1985 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - SPECIAL RUBBER-INSULATED SINGLE-CORE CABLES |
| DIN VDE 0105-111 : 2000 | OPERATION OF ELECTRICAL INSTALLATIONS - PART 111: PARTICULAR REQUIREMENTS FOR UNDERGROUND MINES |
| VDE 0544-1 : 2013 | ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012) |
| VDE 0532-10 : 1982 | TRANSFORMERS AND REACTORS - APPLICATION OF TRANSFORMERS |
| DIN VDE 0532-10 : 1982 | TRANSFORMERS AND REACTORS APPLICATION OF TRANSFORMERS |
| DIN VDE 0298-4 : 1998 | APPLICATION OF CABLES AND CORDS IN POWER INSTALLATIONS - PART 4: RECOMMENDED CURRENT-CARRYING CAPACITY FOR SHEATHED AND NONSHEATHED CABLES FOR FIXED WIRINGS IN AND AROUND BUILDINGS AND FOR FLEXIBLE CABLES AND CORDS |
| VDE 0250-212:1982-06 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - SCREENED PVC-CABLES U[0]/U 3,6/6 KV |
| DIN VDE 0298-3 : 2006-06 | APPLICATION OF CABLES AND CORDS IN POWER INSTALLATIONS - PART 3: GUIDE TO USE OF NON-HARMONIZED CABLES |
| VDE 0101 : 2000 | POWER INSTALLATIONS EXCEEDING 1 KV |
| VDE 0472-803 : 1986 | TESTING OF CABLES, WIRES & FLEXIBLE CORDS - OIL IMMERSION |
| VDE 0282-4 : 2005 COR 1 2005 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSSLINKED INSULATION - 4: CORDS AND FLEXIBLE CABLES |
| DIN VDE 0101 : 2000 | POWER INSTALLATIONS EXCEEDING 1 KV |
| DIN VDE 0250-204 : 2000 | CABLES, WIRES AND CORDS FOR POWER INSTALLATION - PVC-INSTALLATION CABLE NYM |
| DIN VDE 0118-1 : 2010 | ERECTION OF ELECTRICAL INSTALLATIONS IN MINES - PART 1: GENERAL REQUIREMENTS |
| DIN VDE 0250-212 : 1982 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - SCREENED PVC-CABLES |
| DIN VDE 0279 : 1982 | ACCESSORIES FOR UNDERGROUND MINING CABLES - JOINT BOXES U[0]/U = 0,6/1 KV |
| DIN VDE 0282-6 : 2005 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 6: ARC WELDING CABLES |
| DIN VDE 0102 : 1990 | SHORT-CIRCUIT CURRENT CALCULATION IN THREE-PHASE A.C. SYSTEMS |
| VDE 0113-32 : 2009-03 | SAFETY OF MACHINERY ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| DIN EN 60309-1 : 2013 COR 1 2014 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 + A1:2005 + A2:2012) |
| DIN EN 60439-1 : 2005 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES |
| VDE 0298-3 : 2006-06 | Application of cables and cords in power installations – Part 3: Guide to use of non-harmonized cables |
| VDE 0250-812 : 1985 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - RUBBER INSULATED FLEXIBLE CABLE NSSHOEU |
| DIN VDE 0291-2 : 1979 | COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE |
| DIN VDE 0281-3 : 2001 AMD 2 2009 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON SHEATHED CABLES FOR FIXED WIRING |
| DIN EN 60871-1 : 2015 | SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1 000 V - PART 1: GENERAL (IEC 60871-1:2014) |
| DIN 20499:2007-01 | RAIL HAULAGE ROADS IN MINES - GENERAL NILES |
| DIN EN 60865-1 : 2012-09 | SHORT-CIRCUIT CURRENTS - CALCULATION OF EFFECTS - PART 1: DEFINITIONS AND CALCULATION METHODS (IEC 60865-1:2011) |
| DIN EN 60204-32 : 2009-03 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| DIN VDE 0271 : 2007 COR 1 2008 | POWER CABLES - SPECIFICATIONS FOR POWER CABLES 0,6/1 KV AND ABOVE FOR SPECIAL APPLICATIONS |
| VDE 0551 : 1995 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.