VDI 2200:2007-06
Current
The latest, up-to-date edition.
Tight flange connections - Selection, calculation, design and assembly of bolted flange connections
Hardcopy , PDF
German - English
01-06-2007
Preliminary note
Introduction
1 Scope
2 Terms and definitions
3 Symbols and abbreviations
4 Flange joint construction basics
5 Calculation of flange joints
6 Assembly of flange joints
7 Operational leakage measurement
8 Demands on flange joints from
other standards and policies
Annex A - Blowout safety test
Annex B - Component test in terms of
TA Luft and VDI 2440
Annex C - No-go criteria of the test
in respect of the accomplishment or
non-compliance of the leak tightness
requirements according to TA Luft
and VDI 2440
Annex - D Media test
Bibliography
Pertains to analyze and organize the applicable seal connection conditions based on the technical standard.
DocumentType |
Standard
|
Pages |
76
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI/VDE 2862 Blatt 2:2015-02 | Minimum requirements for application of fastening systems and tools - Applications in plant construction, mechanical engineering, equipment manufacturing and for flange connections in components under pressure boundary |
BS EN 1591-1:2013 | Flanges and their joints. Design rules for gasketed circular flange connections Calculation |
EN 1591-1:2013 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
VDI 3479:2010-08 | Emission control - Marketing installation tank farms |
UNE-EN 1591-1:2014 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
VDI 2290:2012-06 | Emission control - Sealing constants for flange connections |
DVGW G 260 : 2013 | GAS QUALITY |
EN 1759-3:2003/AC:2004 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES |
EN 1514-1:1997 | Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
DIN EN 12560-7:2004-09 | Flanges and their joints - Gaskets for class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
DIN 50900-2:2002-06 | CORROSION OF METALS - TERMS - PART 2: ELECTROCHEMICAL TERMS |
EN 12560-6:2003 | Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges |
DIN EN 1514-2:2014-12 | Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
EN 1515-1:1999 | Flanges and their joints - Bolting - Part 1: Selection of bolting |
EN 12560-1:2001 | Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
EN 1591-1:2013 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
EN 12560-3:2001 | Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
DIN EN 1092-3:2004-10 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004 |
DIN EN 12560-2:2013-12 | Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
DIN EN 12560-3:2001-04 | Flanges and their joints - Gaskets for class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; German version EN 12560-3:2001 |
DIN V ENV 1591-2:2001-10 | FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 2: GASKET PARAMETERS |
DIN 2695:2002-11 | Diaphragm-weld packings and weld ring seals for flange connections |
ENV 1591-2 : DRAFT 2001 | FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - GASKET PARAMETERS |
EN 12560-2:2013 | Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
EN 1514-7:2004 | Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
DIN EN 1759-4:2003-12 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 4: ALUMINIUM ALLOY FLANGES |
EN 12560-4:2001 | Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
AD MERKBLATT B7 : 1986 | DESIGN - SCREWS |
EN 1759-4:2003 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
EN 1092-3:2003/AC:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
DIN 28091-2:2014-11 | TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 2: REQUIREMENTS AND TESTING FOR FIBRE-BASED GASKET MATERIALS (FA) |
KTA 3201.2 : 2013 | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 2: DESIGN AND ANALYSIS |
DIN 28090-1:1995-09 | STATIC GASKETS FOR FLANGE CONNECTIONS - PART 1: CHARACTERISTIC VALUES AND TEST PROCEDURES |
DIN EN ISO 10497:2010-06 | Testing of valves - Fire type-testing requirements (ISO 10497:2010); German version EN ISO 10497:2010 |
EN 1514-6:2003 | Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges |
AD MERKBLATT B8 : 1998 | DESIGN - FLANGES |
DIN EN 1514-1:1997-08 | FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKET FOR PN-DESIGNATED FLANGES - PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS |
DIN EN 12560-6:2004-03 | Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges |
EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
EN 1515-2:2001 | Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
EN 1514-2:2014 | Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
EN 1092-4:2002 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
EN 12560-7:2004 | Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
DIN EN 12560-4:2001-04 | Flanges and their joints - Gaskets for class-designated flanges - Part 4: Corrugated, flat or grooved metallic and fillet metallic gaskets for use with steel flanges; German version EN 12560-4:2001 |
EN 1514-4:1997 | Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
DIN EN 12560-1:2001-04 | Flanges and their joints - Gaskets for class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 12560-1:2001 |
DIN 3535-6:2011-01 | GASKETS FOR GAS SUPPLY - PART 6: GASKET MATERIALS BASED ON FIBRES, GRAPHITE OR POLYTETRAFLUOROETHYLENE (PTFE) FOR GAS VALVES, GAS APPLIANCES AND GAS MAINS |
DVGW VP 401 : 1998 | SEALS WITH HIGHER THERMAL RESISTANCE FOR UNIONS AND FLANGES IN CONNECTION WITH METERS AND PRESSURE REGULATORS |
DIN EN 12560-5:2001-04 | Flanges and their joints - Gaskets for class-designated flanges - Part 5: Metallic ring-joint gaskets for use with steel flanges; German version EN 12560-5:2001 |
DIN EN 1514-6:2004-03 | Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges; German version EN 1514-6:2003 |
EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
DIN EN 13555:2014-07 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
DIN 2512:1999-08 | FLANGES - TONGUE AND GROOVE, PN 160 - DESIGN SIZES - RINGS PN 10 TO PN 160 |
ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
DIN 28091-4:2014-11 | TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 4: REQUIREMENTS AND TESTING FOR EXPANDED GRAPHITE-BASED GASKET MATERIALS (GR) |
EN 1514-3:1997 | Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
DIN EN 1092-4:2002-08 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 4: ALUMINIUM ALLOY FLANGES |
DIN EN 1759-1:2005-02 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
EN 12560-5:2001 | Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges |
DIN 52913:2002-04 | TESTING OF STATIC GASKETS FOR FLANGE CONNECTIONS - COMPRESSION CREEP TESTING OF GASKETS MADE FROM SHEETS |
BS 6755-1:1986 | Testing of valves Specification for production pressure testing requirements |
DIN 28091-3:2014-11 | TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 3: REQUIREMENTS AND TESTING FOR PTFE-BASED GASKET MATERIALS (TF) |
EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
ISO 178:2010 | Plastics Determination of flexural properties |
DIN 28091-1:2014-11 | TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 1: GENERAL REQUIREMENTS FOR GASKET MATERIALS |
DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
DIN 2696:1999-08 | Lenticular ring joint gaskets for flanged joints |
EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
EN 13555:2014 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
DIN EN 1759-3:2004-10 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004 |
BS 6755-2:1987 | Testing of valves Specification for fire type-testing requirements |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.