VDI 3803 Blatt 4:2012-09
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
06-01-2023
German - English
01-09-2012
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Air contaminants
6 Testing and classification of air filters
7 Planning, execution, operation of
air filter systems
8 Testing of installed air filter systems
9 Maintenance of air filters
10 Molecular filters (AMC filters)
11 Special filters
Annex A - Criteria for filter selection
Annex B - Overview of common filter types
Annex C - Filter data for tender documents/invitations
to tender
Annex D - Contamination-free filter change
Annex E - Molecular filtration
Bibliography
Glossary
Term index
Preliminary note Introduction 1 Scope 2 Normative references 3 Terms and definitions 4 Abbreviations. 5 Air contaminants 6 Testing and classification of air filters 7 Planning, execution, operation of air filter systems 8 Testing of installed air filter systems 9 Maintenance of air filters 10 Molecular filters (AMC filters) 11 Special filters Annex A - Criteria for filter selection Annex B - Overview of common filter types Annex C - Filter data for tender documents/invitations to tender Annex D - Contamination-free filter change. Annex E - Molecular filtration. Bibliography Glossary Term index
DocumentType |
Standard
|
Pages |
88
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
VDI 6022 Blatt 1.1:2012-08 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Checking of ventilation and air-conditioning systems (VDI Ventilation Code of Practice) |
VDI 6022 Blatt 1.2:2014-06 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Requirements for underground components (VDI Ventilation Code of Practice) |
VDI 2052 Blatt 1:2017-04 | Air conditioning - Kitchens (VDI Ventilation Code of Practice) |
VDI 6032 Blatt 1:2015-05 | Ventilation and indoor-air quality in vehicles - Hygiene requirements for ventilation and air-conditioning systems |
VDI 6028 Blatt 1.1:2013-11 | Assessment criteria for Building Services - Technical quality for sustainable buildings |
VDI 2053 Blatt 1:2014-12 | Air conditioning - Car parks - Exhaust ventilation (VDI Ventilation Code of Practice) |
VDI 6022 Blatt 7.1:2013-10 | Ventilation and indoor-air quality - Branch-specific guides - Waste treatment plants |
VDI 3802 Blatt 1:2014-09 | Air conditioning systems for factories |
VDI 6022 Blatt 3:2011-07 | Ventilation and indoor-air quality - Assessment of indoor-air quality |
VDI 3803 Blatt 2:2017-09 (Draft) | Ventilation and air conditioning - Structural and technical principles - Decentralized ventilation units (VDI ventilation code of practice) |
SN EN 779 : 2012 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
DIN 71460-2:1994-11 (Draft) | ROAD VEHICLES - AIR FILTERS FOR MOTOR PASSENGER COMPARTMENTS - PART 2: TEST FOR GASEOUS FILTRATION |
VDI 2052:2006-04 | Ventilation equipment for kitchens |
VDI 6022 Blatt 3:2011-07 | Ventilation and indoor-air quality - Assessment of indoor-air quality |
EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
VDI 2082:2010-07 | Air-conditioning - Sales outlets (VDI ventilation code of practice) |
DIN 4719:2009-07 | Ventilation and air conditioning - Requirements, performance testing and labelling |
DIN EN 15805:2010-09 | Particulate air filters for general ventilation - Standardised dimensions |
EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
DIN EN 15423:2008-09 | VENTILATION FOR BUILDINGS - FIRE PRECAUTIONS FOR AIR DISTRIBUTION SYSTEMS IN BUILDINGS |
DIN EN 12341:2014-08 | Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter |
DIN EN ISO 14644-3:2006-03 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
VDI 6022 Blatt 4:2012-08 | Ventilation and indoor-air quality - Qualification of personnel for hygiene checkings, hygiene inspections, and assessment of indoor-air quality |
VDI 2083 Blatt 3:2005-07 | Cleanroom technology - Metrology and test methods |
ISO 23210:2009 | Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors |
EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
UL 900:8ED 2015-04 | Air Filter Units |
IEC 61591:1997+AMD1:2005 CSV | Household range hoods - Methods for measuring performance |
VDI 6028 Blatt 4.1:2006-02 | Assesment criteria for building services - Requirement profiles and valuation criteria for ventilation and air conditioning |
PREN 779 : DRAFT 2009 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
VDI 3926 Blatt 1:2004-10 | Testing of cleanable filter media - Standard test for the evaluation of cleanable filter media |
DIN 18017-3:2009-07 | VENTILATION OF BATHROOMS AND WCS WITHOUT OUTSIDE WINDOWS - PART 3: VENTILATION BY FANS |
VDI 2163:2006-03 | Indoor-air hygiene in waste treatment plants |
VDI 3802 Blatt 1:2014-09 | Air conditioning systems for factories |
EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
VDI 6032:2004-02 | Hygiene standards for ventilation technology in passenger verhicles |
DIN 1946-4:2016-06 (Draft) | VENTILATION AND AIR CONDITIONING - PART 4: VENTILATION IN BUILDINGS AND ROOMS OF HEALTH CARE |
DIN EN 15251:2012-12 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
DIN EN ISO 23210:2009-12 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
ISO 14644-3:2005 | Cleanrooms and associated controlled environments Part 3: Test methods |
VDI 3677:1980-07 | Fabric filters |
VDI 3802:1998-12 | Air conditioning systems for factories |
EN 15805:2009 | Particulate air filters for general ventilation - Standardised dimensions |
DIN EN 61591; VDE 0705-1591 : 2016-03 | HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE (IEC 61591:1997 + A1:2005 + A2:2010) |
VDE 0705-1591 : 2016 | HAUSHALT-DUNSTABZUGSHAUBEN UND ANDERE ABSAUGER FUER KOCHDUENSTE - VERFAHREN ZUR MESSUNG DER GEBRAUCHSEIGENSCHAFT (IEC 61591:1997 + A1:2005 + A2:2010) |
DIN EN 14799:2007-07 | AIR FILTERS FOR GENERAL AIR CLEANING - TERMINOLOGY |
UL 586:9ED 2009-08 | High-Efficiency, Particulate, Air Filter Units |
ISO 11155-2:2009 | Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration |
EN 14134:2004 | Ventilation for buildings - Performance testing and installation checks of residential ventilation systems |
EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
VDI 3802 Blatt 2:2012-03 | Air conditioning systems for factories - Capture of air pollutants at machine tools removing material |
VDI 6033 Blatt 1:2007-10 | Avoidance of allergenic exposure - Requirements regarding the testing, evaluation and certification of technical products and components affecting the indoor air |
EN ISO 23210:2009 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
VDI 6035:2009-09 | Ventilation and air-conditioning technology - Decentralized ventilation systems - Wall-mounted air-conditioners (VDI ventilation code of practice) |
ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
VDI 6022 Blatt 1.1:2012-08 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Checking of ventilation and air-conditioning systems (VDI Ventilation Code of Practice) |
EN 61591:1997/A12:2015 | HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE (IEC 61591:1997) |
EN 15423:2008 | Ventilation for buildings - Fire precautions for air distribution systems in buildings |
VDI 3804:2009-03 | Air-conditioning - Office buildings (VDI ventilation code of practice) |
VDI 3803-1 : 2010 COR 2010 | AIR-CONDITIONING - CENTRAL AIR-CONDITIONING SYSTEMS - STRUCTURAL AND TECHNICAL PRINCIPLES (VDI VENTILATION CODE OF PRACTICE) |
VDI 2054:1994-09 | Airconditioning systems for computer areas |
DIN EN 12792:2004-01 | Ventilation for buildings - Symbols, terminology and graphical symbols; German version EN 12792:2003 |
VDI 3803 Blatt 5:2013-04 | Air-conditioning, system requirements - Heat recovery systems (VDI Ventilation Code of Practice) |
VDI 2262:1973-12 | Dust control at the working place |
EN 14799 : 2007 | AIR FILTERS FOR GENERAL AIR CLEANING - TERMINOLOGY |
DIN EN 13501-1:2010-01 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
EN ISO 14644-3:2005 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
EN 12341:2014 | Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.