VDI 5581:2011-11
Current
Current
The latest, up-to-date edition.
Measurement procedures for quality control in precision moulding of aspherical, freeform and microoptics
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-11-2011
Publisher
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Precision moulding of optical
elements
6 Aspheric/freeform optics
7 Test of raw material
8 Measurement systems for tests
of form
9 Measurement of moulding tools
10 Measurement of test series
elements
11 Test in series production
Bibliography
Pertains to measurement procedures for quality control in precision glass moulding of optical elements with aspheric or free form surfaces.
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 5580:2017-01 | Precision glass moulding of optical elements - Basic technology |
| VDI 5583 Blatt 1:2011-11 | Recommendations for interface specifications in the process chain of precision glass moulding of optical elements - Recommendations for optics design |
| VDI 5582:2011-11 | Preparation and cleaning of mould inserts and specimens to ensure reliable quality control measurements in the production chain of precision glass moulding |
| ISO 9211-3:2008 | Optics and photonics — Optical coatings — Part 3: Environmental durability |
| ISO 11455:1995 | Raw optical glass Determination of birefringence |
| EN ISO 4287:1998/A1:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| ISO 10110-14:2007 | Optics and photonics Preparation of drawings for optical elements and systems Part 14: Wavefront deformation tolerance |
| ISO/TR 14999-3:2005 | Optics and photonics Interferometric measurement of optical elements and optical systems Part 3: Calibration and validation of interferometric test equipment and measurements |
| ISO 10110-2:1996 | Optics and optical instruments Preparation of drawings for optical elements and systems Part 2: Material imperfections Stress birefringence |
| ISO 14880-3:2006 | Optics and photonics — Microlens arrays — Part 3: Test methods for optical properties other than wavefront aberrations |
| ISO 14880-2:2006 | Optics and photonics — Microlens arrays — Part 2: Test methods for wavefront aberrations |
| ISO 10110-10:2004 | Optics and photonics Preparation of drawings for optical elements and systems Part 10: Table representing data of optical elements and cemented assemblies |
| DIN ISO 15795:2008-04 | OPTICS AND PHOTONICS - QUALITY EVALUATION OF OPTICAL SYSTEMS - ASSESSING THE IMAGE QUALITY DEGRADATION DUE TO CHROMATIC ABERRATIONS |
| ISO 10110-5:2015 | Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances |
| DIN ISO 10110-14:2008-12 | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 14: WAVEFRONT DEFORMATION TOLERANCE |
| DIN 58197-1:2015-09 | OPTICAL COATINGS - PART 1: MINIMUM REQUIREMENTS FOR ANTIREFLECTING COATINGS |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| DIN ISO 14999-4:2016-04 | Optics and photonics - Interferometric measurement of optical elements and optical systems - Part 4: Interpretation and evaluation of tolerances specified in ISO 10110 (ISO 14999-4:2015) |
| ISO 14880-4:2006 | Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties |
| ISO 10110-9:2016 | Optics and photonics Preparation of drawings for optical elements and systems Part 9: Surface treatment and coating |
| ISO 14880-1:2016 | Optics and photonics Microlens arrays Part 1: Vocabulary and general properties |
| ISO 15529:2010 | Optics and photonics Optical transfer function Principles of measurement of modulation transfer function (MTF) of sampled imaging systems |
| DIN ISO 9335:2015-12 | OPTICS AND PHOTONICS - OPTICAL TRANSFER FUNCTION - PRINCIPLES AND PROCEDURES OF MEASUREMENT (ISO 9335:2012) |
| EN ISO 14880-2:2006 | Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2006) |
| ISO/TR 14999-2:2005 | Optics and photonics Interferometric measurement of optical elements and optical systems Part 2: Measurement and evaluation techniques |
| ISO 10110-4:1997 | Optics and optical instruments Preparation of drawings for optical elements and systems Part 4: Material imperfections Inhomogeneity and striae |
| ISO 14997:2017 | Optics and photonics — Test methods for surface imperfections of optical elements |
| ISO 9211-4:2012 | Optics and photonics Optical coatings Part 4: Specific test methods |
| DIN ISO 10110-8:2012-02 | Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture; roughness and waviness (ISO 10110-8:2010) |
| DIN EN ISO 14880-1:2015-01 (Draft) | OPTICS AND PHOTONICS - MICROLENS ARRAYS - PART 1: VOCABULARY AND GENERAL PROPERTIES (ISO 14880-1:2016) |
| ISO 15795:2002 | Optics and optical instruments — Quality evaluation of optical systems — Assessing the image quality degradation due to chromatic aberrations |
| ISO 9335:2012 | Optics and photonics — Optical transfer function — Principles and procedures of measurement |
| ISO 11421:1997 | Optics and optical instruments — Accuracy of optical transfer function (OTF) measurement |
| EN ISO 14880-4:2006 | Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) |
| ISO 10110-8:2010 | Optics and photonics Preparation of drawings for optical elements and systems Part 8: Surface texture; roughness and waviness |
| DIN 58197-2:2015-09 | OPTICAL COATINGS - PART 2: MINIMUM REQUIREMENTS FOR REFLECTING COATINGS |
| ISO 10110-6:2015 | Optics and photonics Preparation of drawings for optical elements and systems Part 6: Centring tolerances |
| ISO/TR 14999-1:2005 | Optics and photonics Interferometric measurement of optical elements and optical systems Part 1: Terms, definitions and fundamental relationships |
| ISO 10110-3:1996 | Optics and optical instruments Preparation of drawings for optical elements and systems Part 3: Material imperfections Bubbles and inclusions |
| ISO 10110-12:2007 | Optics and photonics Preparation of drawings for optical elements and systems Part 12: Aspheric surfaces |
| EN ISO 14880-1:2016 | OPTICS AND PHOTONICS - MICROLENS ARRAYS - PART 1: VOCABULARY AND GENERAL PROPERTIES (ISO 14880-1:2016) |
| DIN ISO 10110-6:2016-06 | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES (ISO 10110-6:2015) |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| VDI 5583 Blatt 1:2011-11 | Recommendations for interface specifications in the process chain of precision glass moulding of optical elements - Recommendations for optics design |
| ISO 9211-1:2010 | Optics and photonics Optical coatings Part 1: Definitions |
| DIN 58197-4:2015-09 | OPTICAL COATINGS - PART 4: MINIMUM REQUIREMENTS FOR COATINGS USED FOR LASER OPTICS |
| DIN 58172-1:2007-07 | Testing of optical systems - Part 1: Deviations from symmetry |
| DIN 58189:2008-09 | FUNDAMENTAL STANDARDS FOR OPTICS - DETERMINATION OF FOCAL LENGTH |
| DIN ISO 9334:2015-12 | OPTICS AND PHOTONICS - OPTICAL TRANSFER FUNCTION - DEFINITIONS AND MATHEMATICAL RELATIONSHIPS (ISO 9334:2012) |
| DIN ISO 10110-3:2000-02 | OPTICS AND OPTICAL INSTRUMENTS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 3: MATERIAL IMPERFECTIONS - BUBBLES AND INCLUSIONS |
| ISO 10110-1:2006 | Optics and photonics Preparation of drawings for optical elements and systems Part 1: General |
| DIN ISO 15529:2010-11 | Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems (ISO 15529:2010) |
| DIN ISO 10110-9:2016-12 | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 9: SURFACE TREATMENT AND COATING (ISO 10110-9:2016) |
| DIN ISO 10110-11:2016-12 | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 11: NON-TOLERANCED DATA (ISO 10110-11:2016) |
| DIN 58197-3:2015-09 | OPTICAL COATINGS - PART 3: MINIMUM REQUIREMENTS FOR NEUTRAL BEAM SPLITTING COATINGS |
| DIN ISO 11421:2010-10 | Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement (ISO 11421:1997) |
| DIN ISO 10110-5:2016-04 | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 5: SURFACE FORM TOLERANCES (ISO 10110-5:2015) |
| DIN ISO 10110-2:2000-02 | OPTICS AND OPTICAL INSTRUMENTS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 2: MATERIAL IMPERFECTIONS - STRESS BIREFRINGENCE |
| ISO 9334:2007 | Optics and photonics Optical transfer function Definitions and mathematical relationships |
| EN ISO 14880-3:2006 | Optics and phonotics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations (ISO 14880-3:2006) |
| ISO 9211-2:2010 | Optics and photonics — Optical coatings — Part 2: Optical properties |
| VDI 5580:2017-01 | Precision glass moulding of optical elements - Basic technology |
| ISO 10110-7:2017 | Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections |
| ISO 10110-11:2016 | Optics and photonics Preparation of drawings for optical elements and systems Part 11: Non-toleranced data |
| DIN ISO 10110-7:2016-05 (Draft) | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION TOLERANCES |
| DIN ISO 12123:2011-10 | OPTICS AND PHOTONICS - SPECIFICATION OF RAW OPTICAL GLASS (ISO 12123:2010) |
| DIN ISO 10110-4:2000-02 | OPTICS AND OPTICAL INSTRUMENTS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 4: MATERIAL IMPERFECTIONS - INHOMOGENEITY AND STRIAE |
| VDI 5582:2011-11 | Preparation and cleaning of mould inserts and specimens to ensure reliable quality control measurements in the production chain of precision glass moulding |
$113.38
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German - English
PDF - German - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.