VDI/VDE 2616 Blatt 1:2012-08
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardness testing of metallic materials
Available format(s)
Hardcopy , PDF
Superseded date
01-09-2023
Language(s)
German - English
Published date
01-08-2012
Publisher
Preliminary Note
Introduction
1. Scope
2. Technical hardness
3. Selection of a hardness test method
4. Hardness test methods
5. Overview of the hardness test methods
6. Conversion of hardness test results
7. Test piece mounting
8. Curved test surfaces
9. Testing and calibrating hardness testing Machines
10. Measurement uncertainty
Bibliography
Describes an overview of the most commonly used methods for testing the hardness of metallic materials.
| DocumentType |
Standard
|
| Pages |
69
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| DIN 50156-2:2007-07 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES |
| DIN 50157-2:2008-04 | METALLIC MATERIALS - HARDNESS TESTING WITH PORTABLE MEASURING INSTRUMENTS OPERATING WITH MECHANICAL PENETRATION DEPTH - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES |
| ISO 6506-3:2014 | Metallic materials Brinell hardness test Part 3: Calibration of reference blocks |
| EN ISO 4516 : 2002 | METALLIC AND OTHER INORGANIC COATINGS - VICKERS AND KNOOP MICROHARDNESS TESTS |
| DIN 30999:1999-12 | HARDMETALS - ROCKWELL TEST (SCALES A AND 45N) - CALIBRATION OF STANDARDIZED BLOCKS OUT OF HARDMETALS TO BE USED FOR THE VERIFICATION OF HARDNESS TESTING MACHINES |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| DIN EN ISO 6507-1:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
| DIN EN ISO 4545-3:2015-05 (Draft) | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| EN ISO 3738-1:2010 | Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982) |
| ISO 14577-4:2016 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 4: Test method for metallic and non-metallic coatings |
| ISO 4545-2:2005 | Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines |
| DIN EN ISO 4545-4:2015-05 (Draft) | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 4: TABLE OF HARDNESS VALUES |
| ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
| DIN EN ISO 6507-3:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| DIN EN ISO 6507-4:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 4: TABLES OF HARDNESS VALUES |
| DIN EN ISO 3738-1:2010-08 | Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982); German version EN ISO 3738-1:2010 |
| DIN 50157-1:2008-04 | METALLIC MATERIALS - HARDNESS TESTING WITH PORTABLE MEASURING INSTRUMENTS OPERATING WITH MECHANICAL PENETRATION DEPTH - PART 1: TEST METHOD |
| DIN ISO 4384-2:2014-07 | PLAIN BEARINGS - HARDNESS TESTING OF BEARING METALS - PART 2: SOLID MATERIALS (ISO 4384-2:2011 |
| DIN EN ISO 6506-1:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6506-1:2014) |
| DIN EN ISO 3738-2:2006-06 | Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks (ISO 3738-2:1988) |
| DIN EN ISO 14577-4:2015-05 (Draft) | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
| ISO 6507-3:2005 | Metallic materials Vickers hardness test Part 3: Calibration of reference blocks |
| DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
| DIN ISO 4384-1:2014-07 | Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials (ISO 4384-1:2012) |
| ISO 4545-4:2005 | Metallic materials Knoop hardness test Part 4: Table of hardness values |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| DIN 51200:2016-08 | MATERIALS TESTING MACHINES - DESIGN AND APPLICATION OF HOLDING DEVICES FOR TEST PIECES IN HARDNESS TESTING MACHINES |
| DIN 50158-1:2008-07 | METALLIC MATERIALS - HARDNESS TESTING WITH PORTABLE MEASURING INSTRUMENTS OPERATING WITH ELECTRICAL PENETRATION DEPTH - PART 1: TEST METHOD |
| DIN EN ISO 4545-1:2015-05 (Draft) | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 1: TEST METHOD |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| DIN EN ISO 6506-2:2016-04 (Draft) | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| ISO 6506-4:2014 | Metallic materials Brinell hardness test Part 4: Table of hardness values |
| DIN 50156-3:2007-07 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| ISO 3738-1:1982 | Hardmetals — Rockwell hardness test (scale A) — Part 1: Test method |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| DIN 50159-2:2015-01 | Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices |
| DIN EN ISO 14577-1:2015-11 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015 |
| DIN 50156-1:2007-07 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD |
| ISO 6506-2:2017 | Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
| DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
| DIN EN ISO 6508-1:2016-12 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
| ISO 3738-2:1988 | Hardmetals — Rockwell hardness test (scale A) — Part 2: Preparation and calibration of standard test blocks |
| DIN EN ISO 14577-3:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
| DIN 50158-2:2008-04 | METALLIC MATERIALS - HARDNESS TESTING WITH PORTABLE MEASURING INSTRUMENTS OPERATING WITH ELECTRICAL PENETRATION DEPTH - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES |
| DIN ISO 3878:1991-07 | HARDMETALS - VICKERS HARDNESS TEST |
| DIN 50159-1:2015-01 | Metallic materials - Hardness testing with the UCI method - Part 1: Test method |
| ISO 4545-3:2005 | Metallic materials Knoop hardness test Part 3: Calibration of reference blocks |
| DIN EN ISO 4545-2:2015-05 (Draft) | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| ISO 14577-2:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines |
| EN ISO 3738-2:2006 | Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks (ISO 3738-2:1988) |
| DIN EN ISO 14577-2:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015) |
| EN ISO 6508-3:2015 | Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
| ISO 4384-1:2012 | Plain bearings Hardness testing of bearing metals Part 1: Multilayer bearings materials |
| EN ISO 14577-4:2016 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016) |
$260.79
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - German - English
PDF - German - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.