VDI/VDE 3844:2014-01
Current
The latest, up-to-date edition.
Hardcopy , PDF
German - English
01-01-2014
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Actuator designs
6 Safety position
7 Stroking times
8 Actuating forces with control
globe valves
9 Design of elektric multi-turn
actuators for control globe
valves
10 Sizing actuators for control
valves with a rotating closure
memberr
11 Permissible loading of
force-transfer components
12 Function testing and acceptance
Bibliography
Actuators in combination with the attached accessories are important elements in chemical and process engineering systems, some with a safety function.
DevelopmentNote |
Supersedes VDI/VDE 3844-1 and VDI/VDE 3844-2. (01/2014)
|
DocumentType |
Standard
|
Pages |
34
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI 3805 Blatt 24:2017-02 (Draft) | Product data exchange in the building services - Actuators used in building services |
VDI/VDE 3847 Blatt 1:2013-07 | Industrial process control valves - Interface between valve and positioner - Control valves with lifting actuator |
IEC 60050-351:2013 | International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
EN 15714-1:2009 | Industrial valves - Actuators - Part 1: Terminology and definitions |
IEC 61514-2:2013 | Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
DIN EN 13463-8:2004-01 | NON-ELECTRICAL EQUIPMENT FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 8: PROTECTION BY LIQUID IMMERSION 'K' |
VDI/VDE 2174:1967-10 | Mechanical characteristic values of control devices for flowing materials and their determination |
DIN EN 60534-7:2011-08 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 7: CONTROL VALVE DATA SHEET |
EN 60534-6-1:1997 | Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators |
ISO 5210:2017 | Industrial valves — Multi-turn valve actuator attachments |
EN 61514:2002 | Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs |
EN 60534-1:2005 | Industrial-process control valves - Part 1: Control valve terminology and general considerations |
VDE 0409-1349 : 2010 | Industrial process control valves; |
VDE 0810-1 : 2005 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
EN ISO 5210:2017 | Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017) |
EN 1349:2009 | Industrial process control valves |
DIN 3358:1982-10 | LINEAR VALVE ACTUATOR ATTACHMENT; MATING DIMENSIONS |
EN 60534-9 : 2007 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
VDI/VDE 2173:1962-09 | Fluidic characteristic quantities of control valves and their determination |
EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
DIN EN ISO 12944-2:2016-02 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 2: CLASSIFICATION OF ENVIRONMENTS (ISO 12944-2:2017) |
VDI/VDE 3847 Blatt 1:2013-07 | Industrial process control valves - Interface between valve and positioner - Control valves with lifting actuator |
DIN EN 15714-4:2010-02 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
DIN EN 15714-2:2010-02 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
DIN EN 60534-6-1:1998-11 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 6: MOUNTING DETAILS FOR ATTACHMENT OF POSITIONERS TO CONTROL VALVES - SECTION 1: POSTIONER MOUNTING ON LINEAR ACTUATORS |
IEC 60534-6-1:1997 | Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators |
DIN 19226-1:1994-02 | CONTROL TECHNOLOGY - GENERAL TERMS AND DEFINITIONS |
EN 13463-6:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
DIN EN 13463-5:2011-10 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
DIN EN 13463-3:2005-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D' |
VDE 0803-1 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS |
EN 60534-7:2010 | Industrial-process control valves - Part 7: Control valve data sheet |
ISO 8573-1:2010 | Compressed air Part 1: Contaminants and purity classes |
DIN EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
EN 13463-8:2003 | Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k' |
EN 60534-4 : 2006 | Industrial-process control valves - Part 4: Inspection and routine testing |
EN 15714-4:2009 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
VDI/VDE 3847 Blatt 2:2016-10 | Industrial process control valves - Interface between valve and positioner - Control valves with rotary actuator |
DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
DIN EN 60534-9:2008-06 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 9: TEST PROCEDURE FOR RESPONSE MEASUREMENTS FROM STEP INPUTS |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60534-9:2007 | Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs |
EN 12570:2000 | Industrial valves - Method for sizing the operating element |
DIN EN 61508-1 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS |
DIN ISO 8573-1:1995-04 | COMPRESSED AIR FOR GENERAL USE - PART 1: CONTAMINANTS AND QUALITY CLASSES |
EN 13463-2:2004 | Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
VDI/VDE 2178:2009-07 | Fluidic characteristic quantities of quarter turn valves and their determination |
DIN EN 15714-1:2010-02 | Industrial valves - Actuators - Part 1: Terminology and definitions |
DIN EN 60529 : 2014-09 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529:1989 + A1:1999 + A2:2013) |
VDI/VDE 3845 Blatt 1:2010-09 | Industrial process control - Pneumatic control valves - Interfaces of valves and auxiliary equipment |
DIN EN 13463-2:2005-02 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 2: PROTECTION BY FLOW RESTRICTING ENCLOSURE 'FR' |
DIN EN 13463-1:2009-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
DIN EN 13463-6:2005-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B' |
EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
DIN EN 61514:2002-11 | INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONERS WITH PNEUMATIC OUTPUTS |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 13463-3:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
IEC 60534-7:2010 | Industrial-process control valves - Part 7: Control valve data sheet |
DIN EN 61511-1 : 2005 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
EN ISO 5211:2017 | Industrial valves - Part-turn actuator attachments (ISO 5211:2017) |
IEC 60534-1:2005 | Industrial-process control valves - Part 1: Control valve terminology and general considerations |
DIN EN 61514-2:2014-06 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013) |
VDI/VDE 3845 Blatt 2:2011-12 | Industrial process control valves - Pneumatic part-turn actuators - Marking |
DIN EN ISO 5210:2017-08 | INDUSTRIAL VALVES - MULTI-TURN VALVE ACTUATOR ATTACHMENTS (ISO 5210:2017) |
DIN EN 60534-1:2005-07 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 1: CONTROL VALVE TERMINOLOGY AND GENERAL CONSIDERATIONS |
ISO 5211:2017 | Industrial valves — Part-turn actuator attachments |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.