ISO 9000:2015
Current
Current
The latest, up-to-date edition.
Quality management systems — Fundamentals and vocabulary
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English, Russian, Spanish, Castilian
Published date
22-09-2015
ISO 9000:2015 describes the fundamental concepts and principles of quality management which are universally applicable to the following:
- organizations seeking sustained success through the implementation of a quality management system;
- customers seeking confidence in an organization's ability to consistently provide products and services conforming to their requirements;
- organizations seeking confidence in their supply chain that their product and service requirements will be met;
- organizations and interested parties seeking to improve communication through a common understanding of the vocabulary used in quality management;
- organizations performing conformity assessments against the requirements of ISO 9001;
- providers of training, assessment or advice in quality management;
- developers of related standards.
ISO 9000:2015 specifies the terms and definitions that apply to all quality management and quality management system standards developed by ISO/TC 176.
| Committee |
ISO/TC 176/SC 1
|
| DevelopmentNote |
Supersedes ISO 8402 (04/2001) Supersedes ISO/FDIS 9000. (09/2015)
|
| DocumentType |
Standard
|
| Pages |
53
|
| ProductNote |
THIS STANDARD ALSO HAVE CORRECT VERSION FOR FR for the year 2015 THIS STANDARD IS ALSO HAVE CORRECTED VERSION EN
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| API 19G1 CHINESE : 2010 | SIDE-POCKET MANDRELS |
| I.S. EN ISO 19011:2011 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011) |
| 12/30236518 DC : 0 | BS ISO/IEC 27000 - INFORMATION SECURITY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| ISO 29463-1:2017 | High efficiency filters and filter media for removing particles from air Part 1: Classification, performance, testing and marking |
| 15/30321131 DC : 0 | BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES |
| I.S. EN 62343-2:2014 | DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION |
| DIN EN 1325:2014-07 | Value Management - Vocabulary - Terms and definitions |
| BS ISO 18676:2017 | Space systems. Guidelines for the management of systems engineering |
| API Q2 PORTUGUESE : 2011 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| FD ISO GUIDE 34 : 2010 FD | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| SAE J 2552 : 2014 | PUSH-ON HOSE AND MATING HOSE FITTINGS |
| I.S. EN ISO 15195:2003 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| PD ISO/IEC TR 19759:2016 | Software Engineering. Guide to the software engineering body of knowledge (SWEBOK) |
| 14/30282703 DC : 0 | BS ISO 29400 - SHIPS AND MARINE TECHNOLOGY - OFFSHORE WIND ENERGY - PORTS AND MARINE OPERATIONS |
| PD CEN/TR 14585-2:2006 | Corrugated metal hose assemblies for pressure applications Guidance on the use of conformity assessment procedures |
| DD CEN ISO/TS 22367:2010 | Medical laboratories. Reduction of error through risk management and continual improvement |
| 12/30270456 DC : 0 | BS ISO 18091 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2008 IN LOCAL GOVERNMENT |
| UNE-ISO 37001:2017 | Anti-bribery management systems. Requirements with guidance for use. |
| UNE-EN 80001-1:2012 | Application of risk management for IT-networks incorporating medical devices -- Part 1: Roles, responsibilities and activities |
| UNE-ISO 2859-4:2013 | Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels |
| 10/30197201 DC : 0 | BS EN ISO 14006 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| BS EN 15224:2016 | Quality management systems. EN ISO 9001:2015 for healthcare |
| DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PD IEC/TR 63039:2016 | Probabilistic risk analysis of technological systems. Estimation of final event rate at a given initial state |
| BS EN 61249-2-39:2013 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| AQAP 169 : 1 | NATO GUIDANCE ON THE USE OF AQAP 160 EDITION 1 |
| DIN EN ISO 9241-420:2011-10 | Ergonomics of human-system interaction - Part 420: Selection of physical input devices (ISO 9241-420:2011) |
| 07/30174325 DC : 0 | BS EN 61249-2-41 - MATERIALS FOR PRINTED CIRCUIT BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EXPOIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| DIN ISO 26000:2011-01 | Guidance on social responsibility (ISO 26000:2010) |
| BS ISO 22935-1:2009 | Milk and milk products. Sensory analysis General guidance for the recruitment, selection, training and monitoring of assessors |
| BS ISO/IEC 29134:2017 | Information technology. Security techniques. Guidelines for privacy impact assessment |
| 15/30322573 DC : 0 | BS ISO/IEC 33071 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - AN INTEGRATED PROCESS CAPABILITY ASSESSMENT MODEL FOR ENTERPRISE PROCESSES |
| DD ISO/TS 16952-1:2007 | Technical product documentation. Reference designation system General application rules |
| 08/30182184 DC : DRAFT AUG 2008 | BS EN 13263-2 AMD1 - SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| CSA ISO/IEC 90003 : 2004 | SOFTWARE ENGINEERING - GUIDELINES FOR THE APPLICATION OF ISO 9001:2000 TO COMPUTER SOFTWARE |
| 11/30247943 DC : 0 | EN ISO/IEC 17065 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR CERTIFICATION BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES |
| 06/30123954 DC : DRAFT MAR 2006 | |
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| UNE-ISO/IEC TS 17021-3:2014 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 3: Competence requirements for auditing and certification of quality management systems |
| ISO 2789:2013 | Information and documentation — International library statistics |
| UNE-EN 16431:2015 | Railway applications - Track - Hollow sleepers and bearers |
| UNE-ISO 13053-1:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 1: DMAIC methodology |
| BS ISO/IEC 15288:2002 | Systems engineering. System life cycle processes |
| IWA 18:2016 | Framework for integrated community-based life-long health and care services in aged societies |
| 09/30183366 DC : 0 | BS EN 13611:2007/A1 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - GENERAL REQUIREMENTS |
| 16/30300273 DC : 0 | BS ISO 24516-3 - GUIDELINES FOR MANAGEMENT OF ASSETS OF WATER SUPPLY AND WASTEWATER SYSTEMS - PART 3: WASTEWATER COLLECTION NETWORKS |
| 11/30216823 DC : 0 | BS ISO 17367 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT TAGGING |
| BS ISO 15859-3:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Nitrogen |
| DIN EN ISO/IEC 19796-1:2009-08 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| BS ISO 13008:2012 | Information and documentation — Digital records conversion and migration process |
| 11/30247279 DC : 0 | BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL |
| 17/30363625 DC : DRAFT SEP 2017 | BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| ISO/IEC 26514:2008 | Systems and software engineering Requirements for designers and developers of user documentation |
| 08/30184309 DC : DRAFT SEP 2008 | BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| I.S. EN 12966-2:2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 2: INITIAL TYPE TESTING |
| PD 6532-5:1997 | Reference materials. Guide to the contents of certificates of reference materials Quality system guidelines for the production of reference materials |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| ANSI/AAMI/ISO 13408-4:2005(R2014) | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 4: CLEAN-IN-PLACE TECHNOLOGIES |
| 09/30202006 DC : 0 | BS EN 15359 - SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
| BS EN 60903:2003 | Live working. Gloves of insulating material |
| BS ISO 17068:2017 | Information and documentation. Trusted third party repository for digital records |
| BS PD ISO/TR 17068 : 2012 | INFORMATION AND DOCUMENTATION - TRUSTED THIRD PARTY REPOSITORY FOR DIGITAL RECORDS |
| DIN EN 16265:2016-05 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
| UNI CEI CEN/TR 16469 : 2014 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| DIN EN 12764:2015-09 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| ISO 20426:2018 | Guidelines for health risk assessment and management for non-potable water reuse |
| BS ISO 15859-8:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Kerosine propellant |
| 04/30089749 DC : DRAFT DEC 2004 | BS EN 62304 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
| 17/30346842 DC : 0 | BS ISO 10006 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS |
| I.S. EN 12967-3:2007 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 3: COMPUTATIONAL VIEWPOINT |
| BS EN 16265:2015 | Pyrotechnic articles. Other pyrotechnic articles. Ignition devices |
| BS EN 16431:2014 | Railway applications. Track. Hollow sleepers and bearers |
| 09/30211071 DC : 0 | BS EN 61249-2-30 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-30: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXCIDE MODIFIED CYANATE ESTER WOVEN GLASS LAMINMATE OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| 11/30170712 DC : 0 | BS EN 60050-191 ED 2.0 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 191: DEPENDABILITY |
| BS IEC 61334-1.2 : 1997 | DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS - GENERAL CONSIDERATIONS - GUIDE FOR SPECIFICATION |
| BS EN 15357:2011 | Solid recovered fuels. Terminology, definitions and descriptions |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 08/30150852 DC : 0 | BS ISO 14620-2 - SPACE SYSTEMS SAFETY REQUIREMENTS - PART 2: LAUNCH SITE OPERATIONS |
| BS ISO 21101:2014 | Adventure tourism. Safety management systems. Requirements |
| 14/30255135 DC : 0 | BS EN ISO 11607-1:2009/A1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| BS EN 16603-10-06:2014 | Space engineering Technical requirements specification |
| DIN EN ISO 13408-4:2011-09 | Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005) |
| PD ISO/TS 22163:2017 | Railway applications. Quality management system. Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector |
| ISO 15859-8:2004 | Space systems Fluid characteristics, sampling and test methods Part 8: Kerosine propellant |
| AWWA B114 : 2016 | REVERSE OSMOSIS AND NANOFILTRATION SYSTEMS FOR WATER TREATMENT |
| I.S. EN 62282-3-201:2017 | FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS |
| 14/30304346 DC : 0 | BS EN ISO 17782 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION OF MANUFACTURERS OF SPECIAL MATERIALS |
| I.S. EN 9116:2015 | AEROSPACE SERIES - NOTICE OF CHANGE (NOC) REQUIREMENTS |
| I.S. EN 80001-1:2011 | APPLICATION OF RISK MANAGEMENT FOR IT-NETWORKS INCORPORATING MEDICAL DEVICES - PART 1: ROLES, RESPONSIBILITIES AND ACTIVITIES |
| SAE AMS 3970 : 2016 | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 0: INTRODUCTION |
| PD 6644-1:1999 | Proficiency testing by interlaboratory comparisons Development and operation of proficiency testing schemes |
| DIN EN 15619 E : 2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| 03/307701 DC : DRAFT JUNE 2003 | ISO/IEC 17000 - CONFORMITY ASSESSMENT - GENERAL VOCABULARY |
| I.S. EN 287-1:2011 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| BS EN 61249-2-26:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| 10/30216705 DC : 0 | BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| BS ISO/IEC 25000:2014 | Systems and software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Guide to SQuaRE |
| BS EN ISO 13482:2014 | Robots and robotic devices. Safety requirements for personal care robots |
| UNI EN 1474-1 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| BS EN ISO 23611-6:2013 | Soil quality. Sampling of soil invertebrates Guidance for the design of sampling programmes with soil invertebrates |
| PD ISO/TS 29001:2007 | Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations |
| BS EN ISO 12696:2016 | Cathodic protection of steel in concrete |
| 14/30272915 DC : 0 | BS ISO 18400-106 - SOIL QUALITY - SAMPLING - PART 106: QUALITY CONTROL AND QUALITY ASSURANCE |
| IS/ISO 10002 : 2004(R2014) | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR COMPLAINTS HANDLING IN ORGANIZATIONS |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| BS EN 61249-2-23:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| SAE AS 13004 : 2017 | PROCESS FAILURE MODE AND EFFECTS ANALYSIS (PFMEA) AND CONTROL PLANS |
| CEN/TR 15628:2007 | Maintenance - Qualification of Maintenance personnel |
| ANSI/AAMI CI86:2017 | COCHLEAR IMPLANT SYSTEMS: REQUIREMENTS FOR SAFETY, FUNCTIONAL VERIFICATION, LABELING AND RELIABILITY REPORTING |
| CSA Z24510 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
| DIN ISO 22006:2012-02 | Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production (ISO 22006:2009) |
| 11/30250685 DC : 0 | ISO/IEC DTS 17022 - CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS |
| I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| 15/30319488 DC : 0 | BS ISO/IEC 27000 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| CSA ISO/IEC 27000 : 2018 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| I.S. EN ISO 22000:2005 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| 13/30277457 DC : 0 | BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| BS EN 62429:2008 | Reliability growth. Stress testing for early failures in unique complex systems |
| 09/30157835 DC : 0 | BS EN ISO/IEC 80001-1 - APPLICATION OF RISK MANAGEMENT FOR IT-NETWORKS INCORPORATING MEDICAL DEVICES - PART 1: ROLES, RESPONSIBILITIES AND ACTIVITIES |
| BS EN ISO 80601-2-56:2017 | Medical electrical equipment Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
| DD ISO/TS 12805:2011 | Nanotechnologies. Materials specifications. Guidance on specifying nano-objects |
| I.S. EN 15221-5:2011 | FACILITY MANAGEMENT - PART 5: GUIDANCE ON FACILITY MANAGEMENT |
| DIN EN ISO 16559 E : 2014 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014) |
| DD CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity |
| BS EN 16751:2016 | Bio-based products. Sustainability criteria |
| ISO 16049-1:2013 | Air cargo equipment Restraint straps Part 1: Design criteria and testing methods |
| 12/30256100 DC : 0 | BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| BS EN 60966-1:1999 | Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods |
| PD ISO/TS 20658:2017 | Medical laboratories. Requirements for collection, transport, receipt, and handling of samples |
| ISO 18436-3:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 3: Requirements for training bodies and the training process |
| UNE-EN 16256-1:2013 | Pyrotechnic articles - Theatrical pyrotechnic articles - Part 1: Terminology |
| 07/30150339 DC : 0 | BS ISO 27025 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - QUALITY ASSURANCE REQUIREMENTS |
| DD ENV 61112:2002 | Blankets of insulating material for electrical purposes |
| 12/30235100 DC : DRAFT JAN 2012 | BS EN 14428 AMD 1 - SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ISO 50001:2011 | Energy management systems Requirements with guidance for use |
| ANSI/AAMI/ISO 13408-3:2006(R2015) | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| ACMP-2009 : 2014 | GUIDANCE ON CONFIGURATION MANAGEMENT |
| DIN EN 1337-8 E : 2008 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| ISO/IEC TR 38502:2017 | Information technology — Governance of IT — Framework and model |
| UNI EN ISO 9241-210 : 2010 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 210: HUMAN-CENTRED DESIGN FOR INTERACTIVE SYSTEMS |
| ISO 14952-1:2003 | Space systems — Surface cleanliness of fluid systems — Part 1: Vocabulary |
| BS EN 62282-3-200:2016 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| ISO 15859-4:2004 | Space systems Fluid characteristics, sampling and test methods Part 4: Helium |
| I.S. EN ISO 11737-1:2018&LC:2018 | STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS (ISO 11737-1:2018) |
| ISO/TS 11139:2006 | Sterilization of health care products Vocabulary |
| 15/30327269 DC : 0 | BS EN ISO 17034 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| I.S. EN ISO 19157:2013 | GEOGRAPHIC INFORMATION - DATA QUALITY (ISO 19157:2013) |
| 09/30183239 DC : 0 | BS EN 62572-3 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - RELIABILITY STANDARDS - PART 3: LASER MODULES USED FOR TELECOMMUNICATION |
| 09/30140724 DC : 0 | BS ISO 26000 - GUIDANCE ON SOCIAL RESPONSIBILITY |
| DIN EN 15593:2008-05 | Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements |
| BS EN 9104-003:2010 | Aerospace series. Quality management systems Requirements for aerospace quality management system (AQMS) auditor training and qualification |
| 04/30037050 DC : DRAFT JUNE 2004 | ISO/IEC 17021 - GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY OR ENVIRONMENTAL MANAGEMENT SYSTEMS |
| 09/30151834 DC : 0 | BS ISO 24113 - SPACE SYSTEMS - SPACE DEBRIS MITIGATION REQUIREMENTS |
| PD ISO/TS 13811:2015 | Tourism and related services. Guidelines on developing environmental specifications for accommodation establishments |
| BS EN 9277:2015 | Aerospace series. Programme Management. Guide for the management of Systems Engineering |
| UNI EN 15593 : 2008 | PACKAGING - MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS |
| UNI/TR 11486 : 2013 | QUALITY MANAGEMENT SYSTEM - GUIDELINES FOR THE APPLICATION OF UNI EN ISO 9001:2008 IN LIBRARIES |
| BS ISO/IEC 27000 : 2016 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| BS EN 15001-2:2008 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for commissioning, operation and maintenance |
| BS ISO/IEC 40180:2017 | Information technology. Quality for learning, education and training. Fundamentals and reference framework Part : General approach |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| BS TICKIT GUIDE : ISSUE 5.5 | A GUIDE TO SOFTWARE QUALITY MANAGEMENT SYSTEM CONSTRUCTION AND CERTIFICATION TO ISO 9001:2000 |
| 10/30229864 DC : 0 | BS EN ISO 11240 - HEALTH INFORMATICS - IDENTIFICATION OF MEDICINAL PRODUCTS - DATA ELEMENTS AND STRUCTURES FOR UNIQUE IDENTIFICATION AND EXCHANGE OF UNITS OF MEASUREMENT |
| UNI CEI ISO/IEC 12207 : 2013 | SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| BS EN 82079-1:2012 | Preparation of instructions for use. Structuring, content and presentation General principles and detailed requirements |
| PD ISO/IEC TS 24748-1:2016 | Systems and software engineering. Life cycle management Guidelines for life cycle management |
| BS ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| BS ISO 14964:2000 | Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration |
| DIN EN 16848 E : 2017 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| PD ISO/TS 19158:2012 | Geographic information. Quality assurance of data supply |
| PD IEC/TR 62154:2005 | Terminology in the area of Information structures, documentation and graphical symbols |
| 12/30253289 DC : 0 | BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS |
| BS EN ISO 9241-210:2010 | Ergonomics of human-system interaction Human-centred design for interactive systems |
| SAE AS 5553B : 2016 | COUNTERFEIT ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION |
| PD CEN ISO/TS 14907-1:2015 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| BIS IS/ISO 15189 : 2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| 06/30112971 DC : DRAFT JULY 2006 | ISO/IEC 62366 - MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| BS EN 16256-1:2012 | Pyrotechnic articles. Theatrical pyrotechnic articles Terminology |
| BS EN 61230:2008 | Live working. Portable equipment for earthing or earthing and short-circuiting |
| 15/30270498 DC : 0 | BS ISO 16355-1 - APPLICATION OF STATISTICAL AND RELATED METHODS TO NEW TECHNOLOGY AND PRODUCT DEVELOPMENT PROCESS - PART 1: GENERAL PRINCIPLE AND PERSPECTIVE OF QFD METHOD |
| BS ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| BS ISO/IEC 33071:2016 | Information technology. Process assessment. An integrated process capability assessment model for Enterprise processes |
| BS EN 61249-2-10:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| 17/30354834 DC : 0 | BS EN ISO 19011 - GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| ISO/IEC TR 29110-1:2016 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview |
| I.S. EN 16844:2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| BS EN 60300-3-16:2008 | Dependability management Application guide. Guidelines for specification of maintenance support services |
| I.S. EN 125000:1999 | CORES MADE FROM FERRITE MATERIALS (GENERIC SPECIFICATION) |
| DD ISO/TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| BS EN 61249-2-18:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper clad |
| DD CEN/TS 12666-2:2005 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| PD6677 : 2002 (R12) | IMPLEMENTATION GUIDE FOR NATO AQAP-160 INCORPORATING ALL AQAP-160 TEXT AND RELEVANT ISO TEXT |
| I.S. ISO 9000-2:1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 2: GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002 AND ISO 9003 |
| ISO 16024:2005 | Personal protective equipment for protection against falls from a height — Flexible horizontal lifeline systems |
| CEI EN 61014 : 2006 | PROGRAMMES FOR RELIABILITY GROWTH |
| CEI EN 61249-2-39 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-39: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE EPOXIDE AND NON-EPOXIDE, WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| CEI EN 60368-4 : 2003 | PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 4: SECTIONAL SPECIFICATION - CAPABILITY APPROVAL |
| BS ISO/IEC/IEEE 15288:2015 | Systems and software engineering. System life cycle processes |
| AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 14/30287226 DC : 0 | BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| 16/30333286 DC : 0 | BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS |
| 12/30239859 DC : 0 | ISO 10377 - CONSUMER PRODUCT SAFETY - GUIDELINES FOR SUPPLIERS |
| 15/30270279 DC : 0 | BS EN 16432-2 - RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SUBSYSTEMS AND COMPONENTS |
| ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| ISO 17068:2017 | Information and documentation — Trusted third party repository for digital records |
| S.R. CEN ISO/TS 17427:2014 | INTELLIGENT TRANSPORT SYSTEMS - COOPERATIVE SYSTEMS - ROLES AND RESPONSIBILITIES IN THE CONTEXT OF COOPERATIVE ITS BASED ON ARCHITECTURE(S) FOR COOPERATIVE SYSTEMS (ISO/TS 17427:2014) |
| BS ISO 11620:2014 | Information and documentation. Library performance indicators |
| 06/30125917 DC : DRAFT JUN 2006 | ISO 10407-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF DRILL STEM ELEMENTS |
| CEI EN 61249-2-18 : 2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-18: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN FIBREGLASS REINFORCED LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| BS EN 16323:2014 | Glossary of wastewater engineering terms |
| I.S. EN ISO/IEC 17050-1:2010 | CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| ISO 8178-1:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| 03/317040 DC : DRAFT NOV 2003 | ISO/IEC GUIDE 67 - FUNDAMENTALS OF PRODUCT CERTIFICATION |
| DIN EN ISO 11240:2013-03 | Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of units of measurement (ISO 11240:2012) |
| CAN/CSA-C22.2 NO. 60896-21:17 | Stationary lead-acid batteries — Part 21: Valve regulated types — Methods of test (Adopted IEC 60896-21:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb — Partie 21 : Types étanches à soupapes — Méthodes d’essai (norme IEC 60896-21:2004 adoptee, première édition, 2004-02, avec exigences propres au Canada) |
| 12/30243037 DC : 0 | BS EN 62388 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE RADAR - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| 17/30349163 DC : 0 | BS ISO 20387 - BIOTECHNOLOGY - BIOBANKING - GENERAL REQUIREMENTS FOR BIOBANKING |
| 17/30354791 DC : 0 | BS ISO 37153 - SMART COMMUNITY INFRASTRUCTURES - MATURITY MODEL FOR ASSESSMENT AND IMPROVEMENT |
| BS ISO 6707-3:2017 | Buildings and civil engineering works. Vocabulary Sustainability terms |
| ISO 8000-61:2016 | Data quality — Part 61: Data quality management: Process reference model |
| 03/103789 DC : DRAFT FEB 2003 | BS ISO 10018 - COMPLAINTS HANDLING - GUIDELINES FOR ORGANIZATIONS |
| BS EN 61249-2-43:2016 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| DIN EN ISO 23611-6 E : 2013 | SOIL QUALITY - SAMPLING OF SOIL INVERTEBRATES - PART 6: GUIDANCE FOR THE DESIGN OF SAMPLING PROGRAMMES WITH SOIL INVERTEBRATES (ISO 23611-6:2012) |
| BS EN ISO/IEC 17020:2012 | Conformity assessment. Requirements for the operation of various types of bodies performing inspection |
| FD ISO/TS 10004 : 2010 FD | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| 10/30201931 DC : 0 | BS ISO 13008 - INFORMATION AND DOCUMENTATION - DIGITAL RECORDS CONVERSION AND MIGRATION PROCESS |
| PD ISO/IEC TR 90006:2013 | Information technology. Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011 |
| DIN EN 16311:2013-05 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| 15/30266416 DC : 0 | BS ISO/IEC 27006 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF INFORMATION SECURITY MANAGEMENT SYSTEMS |
| CAN/CSA-ISO/IEC 27034-1:12 (R2017) | Information technology - Security techniques - Application security - Part 1: Overview and concepts (Adopted ISO/IEC 27034-1:2011, first edition, 2011-11-15) |
| 16/30302485 DC : 0 | BS EN ISO 11737-1 - STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCT |
| API 683 : 1993 | QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES |
| BS EN ISO 14050:2010 | Environmental management. Vocabulary |
| ISO/IEC TR 29110-5-3:2018 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 5-3: Service delivery guidelines |
| CSA ISO 14025 : 2007 : R2012 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| 04/30114492 DC : DRAFT JUNE 2004 | ISO/IEC 19796-1 - INFORMATION TECHNOLOGY - QUALITY MANAGEMENT, ASSURANCE, AND METRICS - PART 1: GENERAL APPROACH |
| BS ISO 14298:2013 | Graphic technology. Management of security printing processes |
| 16/30302555 DC : 0 | BS ISO 16962 - SURFACE CHEMICAL ANALYSIS - ANALYSIS OF ZINC- AND/OR ALUMINIUM-BASED METALLIC COATINGS BY GLOW-DISCHARGE OPTICAL-EMISSION SPECTROMETRY |
| BS EN 61987-10:2009 | Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange. Fundamentals |
| BS EN 62258-1:2010 | Semiconductor die products Procurement and use |
| ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 02/400385 DC : DRAFT APR 2002 | ISO 10007 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| BS IEC 61111:1992 | Matting of insulating material for electrical purposes |
| I.S. EN ISO 28258:2013 | SOIL QUALITY - DIGITAL EXCHANGE OF SOIL-RELATED DATA (ISO 28258:2013) |
| DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| DD CEN ISO/TS 14907-1:2010 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| 17/30337986 DC : 0 | BS EN ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
| 17/30300276 DC : 0 | BS ISO 19443 - QUALITY MANAGEMENT SYSTEMS - SPECIFIC REQUIREMENTS FOR THE APPLICATION OF ISO 9001 AND IAEA GS-R REQUIREMENTS BY ORGANIZATIONS IN THE SUPPLY CHAIN OF THE NUCLEAR ENERGY SECTOR |
| 15/30312454 DC : 0 | BS EN ISO 80601-2-56 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-56: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CLINICAL THERMOMETERS FOR BODY TEMPERATURE MEASUREMENT |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| I.S. EN 62366-1:2015&AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| 15/30320419 DC : 0 | BS EN 14527 - SHOWER TRAYS FOR DOMESTIC PURPOSES |
| 17/30318206 DC : 0 | BS ISO 20426 - GUIDELINES FOR HEALTH RISK ASSESSMENT AND MANAGEMENT FOR NON-POTABLE WATER REUSE |
| BS EN 16271:2012 | Value management. Functional expression of the need and functional performance specification. Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| 01/206130 DC : DRAFT AUG 2001 | IEC 62258 - SEMICONDUCTOR DIE PRODUCTS - MINIMUM REQUIREMENTS FOR PROCUREMENT AND USE - PART 1: GENERAL REQUIREMENTS - MECHANICAL, MATERIAL AND CONNECTIVITY |
| 11/30212367 DC : 0 | BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT |
| 17/30351717 DC : 0 | BS EN ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| BS EN 61478:2001 | Live working. Ladders of insulating material |
| 02/105845 DC : DRAFT SEP 2002 | PREN 14527 - SHOWER TRAYS FOR DOMESTIC PURPOSES |
| BS EN 61249-2-4:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| 17/30354844 DC : 0 | BS ISO 55002 - ASSET MANAGEMENT - MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 55001 |
| 04/30090376 DC : DRAFT DEC 2004 | ISO 13408-3 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| I.S. EN 60952-1:2013 | AIRCRAFT BATTERIES - PART 1: GENERAL TEST REQUIREMENTS AND PERFORMANCE LEVELS (IEC 60952-1:2013 (EQV)) |
| BS ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principles (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| 11/30247885 DC : 0 | BS EN 9103 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS |
| CEI EN 61249-2-2 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-2: REINFORCED BASE MATERIALS, CLAD AND UNCLAD PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEETS, HIGH ELECTRICAL GRADE, COPPER-CLAD |
| 09/30176512 DC : 0 | BS EN 62508 - GUIDANCE ON HUMAN ASPECTS OF DEPENDABILITY |
| 04/30113665 DC : DRAFT MAY 2004 | IEC 60079-19 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 19: REPAIR AND OVERHAUL FOR APPARATUS USED IN EXPLOSIVE ATMOSPHERES (OTHER THAN EXPLOSIVES) |
| 10/30196262 DC : DRAFT JUNE 2010 | BS 6002-5 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 4: PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS |
| I.S. EN 16271:2012 | VALUE MANAGEMENT - FUNCTIONAL EXPRESSION OF THE NEED AND FUNCTIONAL PERFORMANCE SPECIFICATION - REQUIREMENTS FOR EXPRESSING AND VALIDATING THE NEED TO BE SATISFIED WITHIN THE PROCESS OF PURCHASING OR OBTAINING A PRODUCT |
| 08/30176350 DC : DRAFT MAR 2008 | BS ISO 12967-2 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 2: INFORMATION VIEWPOINT |
| BS ISO 21747:2006 | Statistical methods. Process performance and capability statistics for measured quality characteristics |
| 12/30249455 DC : 0 | BS ISO/IEC 27036-1 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY FOR SUPPLIER RELATIONSHIPS - PART 1: OVERVIEW AND CONCEPTS |
| BS ISO 22514-1:2014 | Statistical methods in process management. Capability and performance General principles and concepts |
| 13/30279690 DC : 0 | BS EN 16250-1 - LEVELS OF PERFORMANCE AND ACCEPTANCE FOR STREET CLEANING AND MUNICIPAL WASTE MANAGEMENT SERVICES - PART 1: GENERAL REQUIREMENTS |
| 09/30205730 DC : 0 | BS ISO/IEC 25040 - SOFTWARE ENGINEERING - SOFTWARE PRODUCT QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - EVALUATION REFERENCE MODEL AND GUIDE |
| S.R. CEN/TR 15809:2008 | CHARACTERIZATION OF SLUDGES - HYGIENIC ASPECTS - TREATMENTS |
| I.S. EN 60895:2003 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C. |
| 02/647837 DC : DRAFT OCT 2002 | PD 0026 - SOFTWARE AND SYSTEM QUALITY FRAMEWORK |
| BS ISO 18461:2016 | International museum statistics |
| 10/30217107 DC : 0 | BS ISO 9606-1 - APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS |
| BS EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
| 06/30106186 DC : 0 | ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT SYSTEM |
| I.S. EN ISO 20857:2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
| 10/30212556 DC : 0 | BS EN 13282-3 - HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
| CAN/CSA-ISO/IEC 27031:13 (R2017) | Information technology - Security techniques - Guidelines for information and communication technology readiness for business continuity (Adopted ISO/IEC 27031:2011, first edition, 2011-03-01) |
| CSA ISO 10012 : 2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| ISO 41011:2017 | Facility management — Vocabulary |
| GR 126 CORE : ISSUE 2 | GENERIC REQUIREMENTS FOR NETWORK OUTDOOR CUSTOMER PREMISES, AND UNIVERSAL CROSS-CONNECTING WIRE |
| BS EN 60384-1:2016 | Fixed capacitors for use in electronic equipment Generic specification |
| 08/30195548 DC : 0 | DD ISO/TS 16949: 2009 - QUALITY MANAGEMENT SYSTEMS: PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| S.R. CEN/TS 12200-2:2017 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 09/30165207 DC : 0 | BS ISO 28801 - DOUBLE SAMPLING PLANS BY ATTRIBUTES WITH MINIMAL SAMPLE SIZES, INDEXED BY PRODUCER'S RISK QUALITY (PRQ) AND CONSUMER'S RISK QUALITY (CRQ) |
| SWIFT 2:2009 | EMBEDDING EFFECTIVE MANAGEMENT SYSTEMS IN PUBLIC SECTOR ORGANIZATIONS - GUIDANCE FOR THE IMPLEMENTATION OF ISO 9001:2008 |
| CSA ISO 19901-6 : 2010 : R2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS |
| DD ISO/TS 29001 : 2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| CSA ISO 10001 : 2008 : R2017 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| CSA ISO 10014 : 2006 : R2016 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
| S.R. CEN ISO/TS 14067:2014 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION (ISO/TS 14067:2013) |
| CSA Z1416: 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| API Q2 : 2011 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| 01/200972 DC : DRAFT FEB 2001 | IEC 61243-1 ED.2 - LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| BS EN ISO/IEC 17050-1:2010 | Conformity assessment. Suppliers declaration of conformity General requirements |
| CSA ISO 10001:2008 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| UNE-CWA 16335:2014 | Biosafety professional competence |
| CSA ISO TS 16949 : 2009 : R2015 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| BS EN 60872-2:1999 | Maritime navigation and radiocommunication equipment and systems. Radar plotting aids Automatic tracking aids (ATA). Methods of testing and required test results |
| BIS IS/ISO 10012 : 2003(R2009) | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| IEEE 20000-2-2013 | IEEE Standard -- Adoption of ISO/IEC 20000-2:2012, Information technology -- Service management -- Part 2: Guidance on the application of service management systems |
| CSA ISO 14040 : 2006 : R2016 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
| CSAISO 10007 : 2003 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| CSA C50069 : 1999 : R2007 | WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CEI EN 61249-2-5 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 2-5: REINFORCED BASE MATERIALS, CLAD AND UNCLAD BROMINATED EPOXIDE CELLULOSE PAPER REINFORCED CORE / WOVEN E-GLASS REINFORCED SURFACES LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| UNE-ISO 7504:2016 | Gas analysis. Vocabulary |
| CSA ISO/IEC 15288 : 2009 : R2014 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
| BS EN 62388:2013 | Maritime navigation and radiocommunication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results |
| BS EN 61249-2-2:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
| CSA Z11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN 15221-3:2012 | Facility Management - Part 3: Guidance on quality in Facility Management |
| UNE-ISO 2789:2014 | Information and documentation. International library statistics. |
| BS EN 61249-2-8:2003 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Reinforced base materials clad and unclad. Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| 04/300394 DC : DRAFT JAN 2004 | IEC 61906 ED.1 - PROCEDURE FOR DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONICS INDUSTRY (DIN 19220 |
| FAA AC 145-5 : 0 | REPAIR STATION INTERNAL EVALUATION PROGRAMS |
| AWWA M55 : 1 | PE PIPE - DESIGN AND INSTALLATION |
| BS ISO 3534-2:2006 | Statistics. Vocabulary and symbols Applied statistics |
| API 2SF : 2013 | MANUFACTURE OF STRUCTURAL STEEL FORGINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| CSA TELECOM ORGANIZATIONS PACKAGE : 2018 | CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR |
| 08/30184169 DC : DRAFT JUNE 2008 | BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| UNE-CEN/TS 1555-7:2015 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| PREN 9135 : DRAFT 2003 | AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS |
| UNE-EN 9102:2016 | Aerospace series - Quality systems - First article inspection requirements |
| CSA ISO/IEC 27034-1:2012 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - APPLICATION SECURITY - PART 1: OVERVIEW AND CONCEPTS |
| UNI CEN/TS 15511 : 2008 | POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| S.R. CEN/TS 13598-3:2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE)(PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR ASSESSMENT OF CONFORMITY |
| 08/30133979 DC : DRAFT MAY 2008 | BS ISO 23409 - MALE CONDOMS - REQUIREMENTS AND TEST METHODS FOR CONDOMS MADE FROM SYNTHETIC MATERIALS |
| CAN/CSA-C50069-99 (R2016) | Welded Composite Enclosures of Cast and Wrought Aluminium Alloys for Gas-Filled High-Voltage Switchgear and Controlgear (Adopted CENELEC Standard EN 50069:1991 including Amendment A1:1993, with Canadian deviations) |
| CSA ISO 9001 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| BS EN 61190-1-1:2002 | Attachment materials for electronic assembly Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| I.S. EN 16602-20-07:2016 | SPACE PRODUCT ASSURANCE - QUALITY AND SAFETY ASSURANCE FOR SPACE TEST CENTRES |
| IEC 60747-1:2006+AMD1:2010 CSV | Semiconductor devices - Part 1: General |
| CSA ISO TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| CAN/CSA-ISO/TS 14048-03 (R2017) | Environmental Management - Life Cycle Assessment - Data Documentation Format (Adopted ISO/TS 14048:2002, first edition, 2002-04-01) |
| ISO 16204:2012 | Durability — Service life design of concrete structures |
| ISO 13019:2018 | Tissue-engineered medical products — Quantification of sulfated glycosaminoglycans (sGAG) for evaluation of chondrogenesis |
| ISO 14955-1:2017 | Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools |
| CSA ISO/IEC 20000-1 :2013 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 13408-1 : 2008 : R2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| PREN 3302 : 200P2 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION |
| NF EN 9133 : 2005 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PARTS |
| ISO 23409:2011 | Male condoms Requirements and test methods for condoms made from synthetic materials |
| IEC 61249-2-5:2003 | Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad |
| ISO 11893:2011 | Space systems Programme management Project organization |
| CSA ISO 14971 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO 14040:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
| CEI EN 62040-4 : 2014 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING |
| ISO 17258:2015 | Statistical methods Six Sigma Basic criteria underlying benchmarking for Six Sigma in organisations |
| UNE-EN 9104-002:2017 | Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs |
| CAN/CSA-ISO/IEC 15504-5:13 (R2017) | Information technology - Process assessment - Part 5: An exemplar software life cycle process assessment model (Adopted ISO/IEC 15504-5:2012, second edition, 2012-02-01) |
| CAN/CSA-ISO/IEC 15416:18 | Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols (Adopted ISO/IEC 15416:2016, second edition, 2016-12-15) |
| IEC 61249-2-18:2002 | Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad |
| UNE-ISO 2230:2012 | Rubber products. Guidelines for storage |
| MIL-DTL-28830 Revision F:2016 | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, CORRUGATED OUTER CONDUCTOR, GENERAL SPECIFICATION FOR |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 16432-2:2015-04 (Draft) | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| CSA ISO/IEC 16085 : 2007 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| DIN ISO 22935-1:2012-12 | Milk and milk products - Sensory analysis - Part 1: General guidance for the recruitment, selection, training and monitoring of assessors (ISO 22935-1:2009) |
| CSA ISO 10014:2006 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
| CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| API Q1 PORTUGUESE : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI TR 31004 : 2014 | RISK MANAGEMENT - GUIDANCE FOR THE IMPLEMENTATION OF ISO 31000 |
| CSA B480 :2002 | CUSTOMER SERVICE STANDARD FOR PEOPLE WITH DISABILITIES |
| DIN EN ISO 13482:2014-11 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
| IEC 61249-2-10:2003 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| EN IEC 61249-2-47:2018 | Materials for printed boards and other interconnecting structures – Part 2-47: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2.0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
| UNE-ISO 17258:2017 | Statistical methods -- Six Sigma -- Basic criteria underlying benchmarking for Six Sigma in organizations |
| IEEE 26513-2010 | IEEE Standard for Adoption of ISO/IEC 26513:2009 Systems and Software Engineering--Requirements for Testers and Reviewers of Documentation |
| CSA ISO TR 14062 : 2003 | ENVIRONMENTAL MANAGEMENT - INTEGRATING ENVIRONMENTAL ASPECTS INTO PRODUCT DESIGN AND DEVELOPMENT |
| AAMI ISO 11607-1 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| SAE AS 9146 : 2017 | FOREIGN OBJECT DAMAGE (FOD) PREVENTION PROGRAM - REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS |
| ISO 39511:2018 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| PREN 9277 : DRAFT 2014 | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDE FOR THE MANAGEMENT OF SYSTEM ENGINEERING |
| TR 9135 : 1 | AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS |
| I.S. EN 16844:2017+A2:2019 | Aesthetic medicine services - Non-surgical medical treatments |
| API 17U : 2015 | RECOMMENDED PRACTICE FOR WET AND DRY THERMAL INSULATION OF SUBSEA FLOWLINES AND EQUIPMENT |
| ISO 45001:2018 | Occupational health and safety management systems — Requirements with guidance for use |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| ISO/IEC 29110-3-2:2018 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 3-2: Conformity certification scheme |
| BS ISO/IEC 20000-1:2011 | Information technology. Service management Service management system requirements |
| TR 9109 : 1 | AEROSPACE SERIES - GUIDELINES FOR SOFTWARE QUALITY MANAGEMENT |
| PREN 9116 : DRAFT 2014 | AEROSPACE SERIES - NOTICE OF CHANGE (NOC) REQUIREMENTS |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| SAE AMS 2950/1 : 2008 | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
| ISO 15859-13:2004 | Space systems Fluid characteristics, sampling and test methods Part 13: Breathing air |
| I.S. EN 16432-2:2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| CEI EN 60384-17 : 2006 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS |
| IWA 27:2017 | Guiding principles and framework for the sharing economy |
| ASTM E 2239 : 2012 : R2016 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
| AQAP 110 : 2 | NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN, DEVELOPMENT AND PRODUCTION |
| I.S. EN 61478:2002 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| I.S. EN 62258-1:2010 | SEMICONDUCTOR DIE PRODUCTS - PART 1: PROCUREMENT AND USE |
| BS IEC 60747-1 : 2006 | SEMICONDUCTOR DEVICES - PART 1: GENERAL |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| I.S. EN 60079-19:2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| CEI EN 61249-4-11 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-11: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD NON-HALOGENATED EPOXIDE, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| CEN/CENELEC GUIDE 33 : 2016 | GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN TESTING STANDARDS |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| ISO/IEC 19796-3:2009 | Information technology — Learning, education and training — Quality management, assurance and metrics — Part 3: Reference methods and metrics |
| I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| I.S. EN ISO 13408-1:2015 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013) |
| I.S. CR 14269:2001 | CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - GUIDELINES FOR THE PURCHASE |
| I.S. CWA 14172-8:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 8: TIME-STAMPING AUTHORITY SERVICES AND PROCESSES |
| I.S. EN 15358:2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| I.S. EN 9117:2017 | AEROSPACE SERIES - DELEGATED PRODUCT RELEASE VERIFICATION |
| GOST ISO 14698-1 : 2005 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS |
| AAMI TIR57 : 2016 | PRINCIPLES FOR MEDICAL DEVICE SECURITY - RISK MANAGEMENT |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| BS EN ISO 17664:2017 | Processing of health care products. Information to be provided by the medical device manufacturer for the processing of medical devices |
| AAMI ISO 13408-5 : 2006 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 5: STERILIZATION IN PLACE |
| I.S. EN 62430:2009 | ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS |
| BS ISO 27608 : 2010 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF LOVIBOND[R] COLOUR - AUTOMATIC METHOD |
| BS EN 60079-19 : 2011 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| AAMI TIR39:2009 | GUIDANCE ON SELECTING A MICROBIAL CHALLENGE AND INOCULATION SITES FOR STERILIZATION VALIDATION OF MEDICAL DEVICES |
| I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
| ISO 21747:2006 | Statistical methods Process performance and capability statistics for measured quality characteristics |
| I.S. EN ISO 17824:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
| I.S. EN ISO 11133:2014 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO/DIS 11133:2012) |
| AAMI ISO 13408-3:2006 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| SAE AS 6171 : 2016 | TEST METHODS STANDARD; GENERAL REQUIREMENTS, SUSPECT/COUNTERFEIT, ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL PARTS |
| I.S. EN 13282-3:2015 | HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
| ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN 15619:2014 | Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures |
| I.S. EN 61249-2-22:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-22: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| I.S. EN 17007:2017 | MAINTENANCE PROCESS AND ASSOCIATED INDICATORS |
| I.S. EN 62282-3-200:2016 | FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| I.S. EN ISO 14025:2010 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| IWA 4:2009 | Quality management systems Guidelines for the application of ISO 9001:2008 in local government |
| ISO 13065:2015 | Sustainability criteria for bioenergy |
| I.S. EN 1474-1:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| ISO/IEC 29109-1:2009 | Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 1: Generalized conformance testing methodology |
| I.S. CLC/TS 61112:2006 | BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| CEI EN 61249-2-40 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-40: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE, MODIFIED, NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| ISO 3999-1:2000 | Radiation protection Apparatus for industrial gamma radiography Part 1: Specifications for performance, design and tests |
| IWA 13:2014 | Multiple resource evaluation guideline |
| I.S. EN 60966-3:2003 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES |
| UNE-ISO 22514-1:2017 | Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts |
| I.S. EN 61249-2-2:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-2: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEETS, HIGH ELECTRICAL GRADE, COPPER-CLAD |
| AAMI TIR39:2009(R2017) | GUIDANCE ON SELECTING A MICROBIAL CHALLENGE AND INOCULATION SITES FOR STERILIZATION VALIDATION OF MEDICAL DEVICES |
| ISO 12875:2011 | Traceability of finfish products Specification on the information to be recorded in captured finfish distribution chains |
| ISO/IEC 26513:2009 | Systems and software engineering - Requirements for testers and reviewers of user documentation |
| CEI EN 61249-4-12 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-12: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD NON-HALOGENATED MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| AAMI IEC 62366-1 : 2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| ISO 20683-2:2016 | Aircraft ground equipment Design, testing and maintenance requirements for nose gear towbarless towing vehicle (TLTV) Part 2: Regional aircraft |
| SAE ARP 9136 : 2016 | AEROSPACE SERIES - ROOT CAUSE ANALYSIS AND PROBLEM SOLVING (9S METHODOLOGY) |
| BS EN 62246-2:2008 | Reed contact units Heavy-duty reed switches |
| ISO/IEC 17021-2:2016 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for auditing and certification of environmental management systems |
| I.S. CEN TS 15331:2006 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| ISO 16919:2014 | Space data and information transfer systems — Requirements for bodies providing audit and certification of candidate trustworthy digital repositories |
| ISO/IEC TS 17022:2012 | Conformity assessment Requirements and recommendations for content of a third-party audit report on management systems |
| PREN 16848 : DRAFT 2015 | BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET |
| I.S. EN 61508-7:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
| UNI EN ISO 12967-2 : 2011 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 2: INFORMATION VIEWPOINT |
| ONORM EN 3685 : 2008 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION |
| CEI EN 61249-2-11 : 2005 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-11: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES EN POLYIMIDE ET TISSU DE VERRE DE TYPE E EPOXYDE BROME MODIFIE OU NON MODIFIE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE), PLAQUEES CUIVRE |
| I.S. EN ISO 17078-4:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| NF ISO 6966-2 : 2006 | AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
| SAE AS 6081 : 2012 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS |
| ISO/IEC 15940:2013 | Systems and software engineering — Software Engineering Environment Services |
| ISO 16311-2:2014 | Maintenance and repair of concrete structures — Part 2: Assessment of existing concrete structures |
| BS EN 62402:2007 | Obsolescence management. Application guide |
| ISO 12877:2011 | Traceability of finfish products Specification on the information to be recorded in farmed finfish distribution chains |
| ISO 10008:2013 | Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions |
| ISO/TS 19158:2012 | Geographic information — Quality assurance of data supply |
| UNI EN ISO 28258 : 2014 | SOIL QUALITY - DIGITAL EXCHANGE OF SOIL-RELATED DATA |
| CSA Z17665-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. CWA 14172-2:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 2: CERTIFICATION AUTHORITY SERVICES AND PROCESSES |
| ISO/TR 14062:2002 | Environmental management Integrating environmental aspects into product design and development |
| UNE-EN 16001:2010 | Energy management systems - Requirements with guidance for use |
| ISO 13448-2:2004 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes |
| UNE-ISO 21101:2015 | Adventure tourism. Safety management systems. Requirements. |
| ISO 80601-2-74:2017 | Medical electrical equipment Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment |
| UNI/TR 11510 : 2013 | Nuclear plants - Particular requirements for the application of UNI EN ISO 9001: 2008 in the nuclear field |
| ISO/IEC/IEEE 15939:2017 | Systems and software engineering — Measurement process |
| PD ISO/TS 9002:2016 | Quality management systems. Guidelines for the application of ISO 9001:2015 |
| AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| DIN EN ISO 22300 E : 2014 | SOCIETAL SECURITY - TERMINOLOGY (ISO 22300:2012) |
| DIN EN 14428:2015-09 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| OIML D 29 : 2008 | GUIDE FOR THE APPLICATION OF ISO/IEC GUIDE 65 TO ASSESSMENT OF MEASURING INSTRUMENT CERTIFICATION BODIES IN LEGAL METROLOGY |
| UNE-EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014) |
| UNI EN ISO 19011 : 2012 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| BS EN ISO 14044 : 2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
| DIN EN ISO 50001 E : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
| I.S. ISO 14004:2005 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
| I.S. EN 16751:2016 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| DD CEN/TS 14632:2006 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity |
| UNI CEN ISO/TS 11133-1 : 2009 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GUIDELINES ON PREPARATION AND PRODUCTION OF CULTURE MEDIA - PART 1: GENERAL GUIDELINES ON QUALITY ASSURANCE FOR THE PREPARATION OF CULTURE MEDIA IN THE LABORATORY |
| I.S. CEN/TR 14585-2:2006 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 2: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| BIS IS/ISO 11979-8 : 2006 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 8: FUNDAMENTAL REQUIREMENTS |
| UNI EN 15234-1 : 2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| UNI CEN ISO/TS 15877-7 : 2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 61249-2-44:2016 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-44: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| UNE-EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| CEI EN 60952-1 : 2014 | AIRCRAFT BATTERIES - PART 1: GENERAL TEST REQUIREMENTS AND PERFORMANCE LEVELS |
| UNI CEN ISO/TS 22391-7 : 2012 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 62246-2:2008 | REED CONTACT UNITS - PART 2: HEAVY-DUTY REED SWITCHES |
| ASTM E 2916 : 2013 | Standard Terminology for Digital and Multimedia Evidence Examination |
| DEFSTAN 00-55(PT1)/1(1991) : INTERIM | THE PROCUREMENT OF SAFETY CRITICAL SOFTWARE IN DEFENCE EQUIPMENT - REQUIREMENTS |
| ASTM E 3106 : 2017 | Standard Guide for Science-Based and Risk-Based Cleaning Process Development and Validation |
| UNE-ISO 22320:2013 | Societal security. Emergency management. Requirements for incident response |
| UNI EN 9120 : 2010 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE DISTRIBUTORS |
| I.S. EN 61249-2-30:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-30: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE MODIFIED CYANATE ESTER WOVEN GLASS LAMINATE OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD (IEC 61249-2-30:2012 (EQV)) |
| UNE-ISO 39001:2013 | Road traffic safety (RTS) management systems - Requirements with guidance for use |
| NF EN 3389 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| CSA ISO 10012-1 : 0 | QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - PART 1: METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT |
| ASTM D 5330/D5330M : 2006 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| CSA ISO 7207-1 : 0 | IMPLANTS FOR SURGERY - FERMORAL AND TIBIAL COMPONENTS FOR PARTIAL AND TOTAL KNEE JOINT PROSTHESES - PART 1: CLASSIFICATION, DEFINITIONS AND DESIGNATION OF DIMENSIONS |
| ASTM D 7776 : 2012 | Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories (Withdrawn 2017) |
| BS EN 50069 : 1991 | SPECIFICATION FOR WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| I.S. EN 9104-002:2016 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| I.S. EN 15619:2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| I.S. ISO 9004-3:1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS |
| API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| CSA ISO TR 31004 : 2014 | RISK MANAGEMENT - GUIDANCE FOR THE IMPLEMENTATION OF ISO 31000 |
| ISO/IEC TR 90005:2008 | Systems engineering Guidelines for the application of ISO 9001 to system life cycle processes |
| EN 60079-19:2011/A1:2015 | EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010) |
| EN ISO 41011:2018 | Facility management - Vocabulary (ISO 41011:2017) |
| ISO/IEC 90003:2014 | Software engineering Guidelines for the application of ISO 9001:2008 to computer software |
| I.S. EN 16679:2014 | PACKAGING - TAMPER VERIFICATION FEATURES FOR MEDICINAL PRODUCT PACKAGING |
| I.S. EN ISO 9241-210:2010 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 210: HUMAN-CENTRED DESIGN FOR INTERACTIVE SYSTEMS |
| EN ISO/TS 15874-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| ASTM E 2230 : 2013 : REDLINE | Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material |
| API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| ISO/IEC 25000:2014 | Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) Guide to SQuaRE |
| EN ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) |
| ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
| ISO/TS 12911:2012 | Framework for building information modelling (BIM) guidance |
| ISO 3951-3:2007 | Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| ISO 14006:2011 | Environmental management systems Guidelines for incorporating ecodesign |
| NFPA 1953 : 2016 | PROTECTIVE ENSEMBLES FOR CONTAMINATED WATER DIVING |
| DIN EN 1822-5:2011-01 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| I.S. EN 1822-5:2009 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
| EN 9103:2014/AC:2015 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS |
| I.S. EN ISO 9001:2015 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN 13261:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| DIN EN 13262:2011-06 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| DIN EN ISO 9875 E : 2013 | SHIPS AND MARINE TECHNOLOGY - MARINE ECHO-SOUNDING EQUIPMENT (ISO 9875:2000 + COR. 1:2006) |
| DIN EN ISO 14698-1 E : 2004 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS |
| DIN EN 12952-6:2011-10 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| DIN EN 1422:2014-08 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 22000:2005-11 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| DIN EN 14359 E : 2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| BS EN ISO 14310:2008 | Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
| 10/30214967 DC : 0 | BS EN 14588 - SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| BS EN 14996:2006 | Water quality. Guidance on assuring the quality of biological and ecological assessments in the aquatic environment |
| BS EN 13980:2002 | Potentially explosive atmospheres. Application of quality systems |
| UNE-ISO 37500:2016 | Guidance on outsourcing |
| BS EN 3302:2017 | Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550 °C. Technical specification |
| UNE-EN 12159:2013 | Builders hoists for persons and materials with vertically guided cages |
| BS EN ISO 10993-1 : 2009-10 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009) |
| BS ISO 24511:2007 | Activities relating to drinking water and wastewater services. Guidelines for the management of wastewater utilities and for the assessment of wastewater services |
| BS EN ISO 22005:2007 | Traceability in the feed and food chain. General principles and basic requirements for system design and implementation |
| BS EN 450-2:2005 | Fly ash for concrete Conformity evaluation |
| BS EN 12899-4:2007 | Fixed, vertical road traffic signs Factory production control |
| I.S. EN ISO 13485:2016 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (ISO 13485:2016) |
| UNE-ISO 55000:2015 | Asset management. Overview, principles and terminology. |
| BS EN 15038:2006 | Translation services. Service requirements |
| IEC 61230:2008 | Live working - Portable equipment for earthing or earthing and short-circuiting |
| UNE-EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| EN 197-2:2014 | Cement - Part 2: Conformity evaluation |
| UNE-EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| IEC 61249-2-1:2005 | Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad |
| BS EN ISO 16426:2002 | Fasteners. Quality assurance system |
| BS EN 13913:2003 | Railway applications. Rubber suspension components. Elastomer-based mechanical parts |
| ISO 17989-1:2015 | Tractors and machinery for agriculture and forestry Sustainability Part 1: Principles |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 16091:2002 | Space systems. Integrated logistic support |
| BS EN 13802:2013 | Railway applications. Suspension components. Hydraulic dampers |
| I.S. EN ISO 16106:2006 | PACKAGING - TRANSPORT PACKAGES FOR DANGEROUS GOODS -DANGEROUS GOODS PACKAGINGS, INTERMEDIATE BULK CONTAINERS (IBCS) AND LARGE PACKAGINGS - GUIDELINES FOR THE APPLICATION OF ISO 9001 |
| BS EN ISO 19902 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| BS EN 14508:2016 | Postal services. Quality of service. Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| BS EN 13261 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| BS EN 487:2009 | Aluminium and aluminium alloys. Rolling ingots. Specifications |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 14161:2010 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| ISO 9241-210:2010 | Ergonomics of human-system interaction Part 210: Human-centred design for interactive systems |
| BS EN 13597:2003 | Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs |
| IEC 62343-2:2014 | Dynamic modules - Part 2: Reliability qualification |
| BS EN ISO 14161:2009 | Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results |
| ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
| ISO 9241-420:2011 | Ergonomics of human-system interaction — Part 420: Selection of physical input devices |
| BS EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
| BS EN 505:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet |
| DIN EN 1422:1997-11 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13263-2:2005 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| I.S. EN ISO 11608-1:2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
| DIN EN 12899-4:2008-02 | Fixed, vertical road traffic signs - Part 4: Factory production control |
| I.S. EN ISO 15189:2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15) |
| EN 15357:2011 | Solid recovered fuels - Terminology, definitions and descriptions |
| CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| BS 6001-3:2005 | Sampling procedures for inspection by attributes Specification for skip-lot sampling procedures |
| DIN EN 14996:2006-08 | Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment |
| EN 125000:1997 | Generic Specification: Cores made of ferrite materials |
| IEC 60384-1:2016 RLV | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| EN 13263-2:2005+A1:2009 | Silica fume for concrete - Part 2: Conformity evaluation |
| EN 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
| EN 61249-4-5:2005 | Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability |
| EN 1337-8:2007 | Structural bearings - Part 8: Guide Bearings and Restraint Bearings |
| EN 15213-4:2013 | Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 4: Interface and system requirements in terms of long range communication system |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 12967-2:2007 | Health informatics - Service architecture - Part 2: Information viewpoint |
| EN 61249-2-37:2009 | Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 61243-3:2014/AC:2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Guidance for assessment of conformity |
| EN 61249-2-43:2016 | Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 62040-4:2013 | Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting |
| CEN/TS 15718:2011 | Railway applications - Wheelsets and bogies - Product requirements for cast wheels |
| EN 12899-4:2007 | Fixed, vertical road traffic signs - Part 4: Factory production control |
| EN 12798:2007 (edition 2) | Transport Quality Management System - Road, Rail and Inland navigation transport - Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods with regard to safety |
| EN 12952-5:2011 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| EN 60966-3:2009 | Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies |
| CEN/TS 15224:2005 | Health services - Quality management systems - Guide for the use of EN ISO 9001:2000 |
| EN 62304:2006/A1:2015 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015) |
| EN 62309:2004 | Dependability of products containing reused parts - Requirements for functionality and tests |
| CEN/CLC ISO/IEC/TS 17021-3:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013) |
| ONORM EN ISO 3834-1 : 2006 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 1: CRITERIA FOR THE SELECTION OF THE APPROPRIATE LEVEL OF QUALITY REQUIREMENTS |
| EN 61249-4-19:2013 | Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| CEN ISO/TR 14969:2005 | Medical devices - Quality management systems - Guidance on the application of ISO 13485:2003 (ISO/TR 14969:2004) |
| CEN ISO/TS 11133-1:2009 | Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS 11133-1:2009) |
| EN 61069-8:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties |
| EN 12967-3:2007 | Health informatics - Service architecture - Part 3: Computational viewpoint |
| EN 61478:2001/A1:2003 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| EN 13428:2004 | Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
| CEN/TR 15592:2007 | Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| EN 62402 : 2007 | OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE |
| EN 15628:2014 | Maintenance - Qualification of maintenance personnel |
| EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results |
| EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| EN 61249-4-2:2005 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability |
| EN 60936-1 : 2000 AMD 1 2002 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - RADAR - PART 1: SHIPBORNE RADAR - PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| EN 60870-5-6:2009 | Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards |
| EN 12966-3 : 2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| CEN/TS 15674:2007 | Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods |
| EN 61249-2-1:2005 | Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| CEN/TS 15472:2016 | Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing |
| EN 62366 : 2008 AMD 1 2015 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366:2007/A1:2014) |
| CEN/TS 16919:2016 | Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE |
| EN 15224:2016 | Quality management systems - EN ISO 9001:2015 for healthcare |
| EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| DIN EN ISO 21649:2010-01 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN 62429:2008 | Reliability growth - Stress testing for early failures in unique complex systems |
| CEN/TR 15941:2010 | Sustainability of construction works - Environmental product declarations - Methodology for selection and use of generic data |
| EN 13263-1:2005+A1:2009 | Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
| IEC 61511-2:2016 RLV | Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016 |
| EN 61811-54:2002 | Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base |
| EN 62542 : 2013 | ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013) |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| CEN/TR 16862:2015 | Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence |
| CEN/CLC ISO/IEC/TS 17021-2:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC/TS 17021-2:2012) |
| CEN/TS 15357:2006 | Solid recovered fuels - Terminology, definitions and descriptions |
| EN 61249-2-27:2013 | Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad |
| EN 62246-2:2008 | Reed contact units - Part 2: Heavy-duty reed switches |
| EN 60966-4:2003 | Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies |
| EN 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| EN 14588:2010 | Solid biofuels - Terminology, definitions and descriptions |
| EN 62282-3-200:2016 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| EN 62258-1:2010 | Semiconductor die products - Part 1: Procurement and use |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 14698-1:2004-04 | Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods (ISO 14698-1:2003) |
| CEN/TS 15234:2006 | Solid biofuels - Fuel quality assurance |
| BS 6001-5:2002 | Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels |
| EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| EN 12966-2 : 2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 2: INITIAL TYPE TESTING |
| EN 1325-2 : 2004 | VALUE MANAGEMENT, VALUE ANALYSIS, FUNCTIONAL ANALYSIS VOCABULARY - PART 2: VALUE MANAGEMENT |
| EN ISO/IEC 17050-1:2010 | Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements (ISO/IEC 17050-1:2004, corrected version 2007-06-15) |
| EN 61249-2-26:2005 | Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| EN 1337-4:2004/AC:2007 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
| EN 15331:2011 | Criteria for design, management and control of maintenance services for buildings |
| EN 1337-6:2004 | Structural bearings - Part 6: Rocker bearings |
| EN 61230:2008 | LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
| CEN/TS 15675:2007 | Air quality - Measurement of stationary source emissions - Application of EN ISO/IEC 17025:2005 to periodic measurements |
| EN ISO 12696:2016 | Cathodic protection of steel in concrete (ISO 12696:2016) |
| EN ISO 16559 : 2014 COR 2014 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014) |
| CEN ISO/TS 14067:2014 | Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013) |
| UNI EN ISO 3834-1 : 2006 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 1: CRITERIA FOR THE SELECTION OF THE APPROPRIATE LEVEL OF QUALITY REQUIREMENTS |
| EN 12186:2014 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
| EN 12899-5:2007 | Fixed, vertical road traffic signs - Part 5: Initial type testing |
| EN 61249-2-44:2016 | Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 62507-1:2011 | Identification systems enabling unambiguous information interchange - Requirements - Part 1: Principles and methods |
| EN 61249-2-18:2002 | Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad |
| EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| EN 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| NACE 02107 : 0 | COATINGS FOR PROTECTION OF THREADED FASTENERS USED WITH STRUCTURAL STEEL, PIPING, AND EQUIPMENT |
| DIN EN 13889:2009-02 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY |
| EN 61229:1995/A2:2002 | RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
| ASME B16.25 : 2017 | BUTTWELDING ENDS |
| MIL-DTL-29563 Revision B:2014 | ANTENNA SYSTEM, AIMS SHIPBOARD, ELECTRONICALLY STEERED OE-120/UPX |
| DEFSTAN 61-021 SUPP01/5(2017) : 2017 | GENERAL SPECIFICATION FOR BATTERIES - SUPPLEMENT 01: SPECIFICATION FOR ALKALINE MANGANESE DIOXIDE BATTERY, 1.5V, NSN 6135-99-195-6708 LR6, NSN 6135-99-117-3212 LR14, NSN 6135-99-109-9428 LR20 |
| BS OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
| SBAC TS 157 : 6 | AEROSPACE SECTOR CERTIFICATION SCHEME (ASCS) - REQUIREMENTS AND PROCEDURES |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ACMP-2009-SRD-10 : A2017 | NATO CM TRAINING PACKAGE |
| VDI/VDE 2180 Blatt 6:2013-06 | Safeguarding of industrial process plants by means of process control engineering (PCE) - Application of functional safety in the context of explosion protection |
| ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
| CLSI C49:2018(R2023) | Analysis of Body Fluids in Clinical Chemistry |
| ASME B16.25:2022 | Buttwelding Ends |
| DEFSTAN 00-56(PT2)/2(1996) : 1996 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE |
| DEFSTAN 21-59/2(2006) : 2006 | SYSTEMS ENGINEERING GUIDE FOR NAVAL COMBAT SYSTEMS |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| DEFSTAN 07-85(PT1)/3(2006) : 2006 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| DEFSTAN 61-021 SUPP01/6(2018) : 2018 | GENERAL SPECIFICATION FOR BATTERIES - SUPPLEMENT 01: SPECIFICATION FOR ALKALINE MANGANESE DIOXIDE BATTERY, 1.5V, NSN 6135-99-195-6708 LR6, NSN 6135-99-117-3212 LR14, NSN 6135-99-109-9428 LR20 |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| VDI 6009 Blatt 2:2003-12 | Facility Management - Introduction of building management in several properties - Examples |
| DEFSTAN 00-00(PT1)/3(1999) : 1999 | STANDARDS FOR DEFENCE - PART 1: MOD UK STANDARDISATION POLICY, ORGANIZATIONS AND IMPLEMENTATION |
| DEFSTAN 23-6/3(2000) : 2000 | GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT |
| ASME B16.29 : 2017 | Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV |
| DEFSTAN 07-085(PT1)/4(2017) : 2017 | DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS |
| DEFSTAN 02-165/2(2010) : 2010 | REQUIREMENTS FOR SPRING INTERIOR MATTRESSES FOR USE IN SURFACE SHIPS AND SUBMARINES |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| ASME B16.48 : 2015 | LINE BLANKS |
| INCITS/ISO/IEC 27013 : 2014 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDANCE ON THE INTEGRATED IMPLEMENTATION OF ISO/IEC 27001 AND ISO/IEC 20000-1 |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| DIN EN 16603-10-06:2014-11 | SPACE ENGINEERING - PART 10-06: TECHNICAL REQUIREMENTS SPECIFICATION |
| 15/30299325 DC : 0 | BS ISO/IEC 27013 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDANCE ON THE INTEGRATED IMPLEMENTATION OF ISO/IEC 27001 AND ISO/IEC 20000-1 |
| UNE-ISO 16730-1:2017 | Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General |
| I.S. EN 16256-1:2012 | PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 1: TERMINOLOGY |
| DIN EN 15221-3:2011-12 | Facility Management - Part 3: Guidance on quality in Facility Management |
| ISO/TR 22869:2005 | Medical laboratories Guidance on laboratory implementation of ISO 15189: 2003 |
| BS EN ISO 15378:2017 | Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| I.S. EN 16601-00-01:2015 | SPACE SYSTEMS - GLOSSARY OF TERMS |
| TR 102 688-8 : 1.1.1 | MEDIA CONTENT DISTRIBUTION (MCD); MCD FRAMEWORK; PART 8: AUDIENCE MEASUREMENT |
| DIN EN ISO 20857 E : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
| API 691 : 2017 | RISK-BASED MACHINERY MANAGEMENT |
| BS EN 61751:1998 | Laser modules used for telecommunication. Reliability assessment |
| BS IEC 60300-3-1 : 2003 AMD 15370 | DEPENDABILITY MANAGEMENT - APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY |
| 13/30246894 DC : 0 | BS EN ISO 17100 - TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES |
| ISO 16404:2013 | Space systems Programme management Requirements management |
| DIN EN 15221-4:2011-12 | Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management |
| CEI EN 61249-2-37 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| BS EN 15213-4:2013 | Intelligent transport systems. After-theft systems for the recovery of stolen vehicles Interface and system requirements in terms of long range communication system |
| 14/30295030 DC : 0 | BS ISO/IEC 17021-1 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 1: REQUIREMENTS |
| ASTM F 2575 : 2014 : REDLINE | Standard Guide for Quality Assurance in Translation |
| NFL 63 010 : 1997 AMD 1 1999 | AEROSPACE INDUSTRY - AIRBORNE, STATIONARY, PERMANENT PRESSURE, FIXED METALLIC EXTINGUISHERS - TECHNICAL SPECIFICATION AND QUALIFICATION CONDITIONS |
| 09/30154135 DC : 0 | BS EN 62474 - MATERIAL DECLARATION FOR ELECTRICAL AND ELECTRONIC EQUIPMENT |
| 14/30295890 DC : 0 | BS EN 1330-1 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| BS EN 60952-1:2013 | Aircraft batteries General test requirements and performance levels |
| BS ISO 15849:2001 | Ships and marine technology. Guidelines for implementation of a fleet management system network |
| 10/30197164 DC : 0 | BS ISO 11893 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - PROJECT ORGANIZATION |
| PD ISO/IEC TR 33014:2013 | Information technology. Process assessment. Guide for process improvement |
| AAMI ISO 20857 : 2010 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO 24510:2007 | Activities relating to drinking water and wastewater services. Guidelines for the assessment and for the improvement of the service to users |
| 17/30338753 DC : 0 | BS ISO 80601-2-79 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-79: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF VENTILATORY SUPPORT EQUIPMENT FOR VENTILATORY IMPAIRMENT |
| BS ISO 19826:2017 | Space systems. Programme management. Management of product characteristics |
| CSA ISO/IEC 90003 : 2004 : R2014 | SOFTWARE ENGINEERING - GUIDELINES FOR THE APPLICATION OF ISO 9001:2000 TO COMPUTER SOFTWARE |
| SAE AS 9162 : 2016 | AEROSPACE OPERATOR SELF-VERIFICATION PROGRAMS |
| 08/30166039 DC : DRAFT JUNE 2008 | BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS |
| PD ISO/IEC Guide 67:2004 | Conformity asessment. Fundamentals of product certification |
| BS ISO 17258:2015 | Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations |
| BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| DIN EN 16114:2011-12 | MANAGEMENT CONSULTANCY SERVICES |
| CAN/CSA-ISO 14004:16 | Environmental management systems — General guidelines on implementation |
| CSA Z24510 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE ASSESSMENT AND FOR THE IMPROVEMENT OF THE SERVICE TO USERS |
| BIS IS/ISO/TR 10013 : 2001(R2011) | GUIDELINES FOR QUALITY MANAGEMENT SYSTEM DOCUMENTATION |
| BS EN 61249-2-1:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| 10/30184538 DC : 0 | BS ISO/IEC 20000-2 - INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: GUIDANCE ON THE APPLICATION OF SERVICE MANAGEMENT SYSTEMS |
| 17/30321076 DC : 0 | BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR ANY ORGANIZATION IN THE FOOD CHAIN |
| 14/30311660 DC : 0 | BS EN 9139 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - DEVELOPMENT OF PROCESS-BASED BODIES OF KNOWLEDGE |
| DD ISO/TS 10004:2010 | Quality management. Customer satisfaction. Guidelines for monitoring and measuring |
| ISO 24113:2011 | Space systems Space debris mitigation requirements |
| BS ISO/IEC 26514:2008 | Software and systems engineering. Requirements for designers and developers of user documentation |
| 02/210157 DC : DRAFT OCT 2002 | IEC 61249-2-23 ED.1 - MATERIALS FOR INTERCONNECTION STRUCTURES - PART 2-23: SECTIONAL SPECIFICATION SET FOR REINFORCED BASE MATERIALS, CLAD AND UNCLAD - SECTION 23: NON-HALOGENATED PHENOLIC CELLULOSE PAPER REINFORCED LAMINATE SHEET, ECONOMIC GRADE, COPPER CLAD |
| 13/30278343 DC : 0 | BS EN 62246-1 - REED SWITCHES - PART 1: GENERIC SPECIFICATION |
| EN 12764:2015 | Sanitary appliances - Specification for whirlpool baths |
| 06/30145303 DC : DRAFT JAN 2006 | ISO 18436-3 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR TRAINING AND CERTIFICATION OF PERSONNEL - PART 3: REQUIREMENTS FOR TRAINING BODIES AND THE TRAINING PROCESS |
| I.S. EN 82304-1:2017 | HEALTH SOFTWARE - PART 1: GENERAL REQUIREMENTS FOR PRODUCT SAFETY |
| AWWA B116 : 2015 | ELECTRODIALYSIS AND ION-EXCHANGE MEMBRANE SYSTEMS |
| BS ISO 10006:2017 | Quality management. Guidelines for quality management in projects |
| AQAP 131 : 1 | NATO QUALITY ASSURANCE REQUIREMENTS FOR FINAL INSPECTION |
| PD CEN ISO/TS 17969:2017 | Petroleum, petrochemical and natural gas industries. Guidelines on competency management for well operations personnel |
| BS ISO/IEC 25040:2011 | Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). Evaluation process |
| UNE-EN ISO 11608-5:2013 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| 10/30234625 DC : 0 | BS EN 14420-1 - HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| UNE 179008:2016 | Quality management system for liver transplantation units |
| 10/30231940 DC : 0 | BS EN ISO 12967-1 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 1: ENTERPRISE VIEWPOINT |
| CLSI AUTO11 P : 1ED 2006 | IT SECURITY OF IN VITRO DIAGNOSTIC INSTRUMENTS AND SOFTWARE SYSTEMS |
| DIN EN 13480 Beiblatt 1:2002-08 | Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures |
| DIN ISO 37500 E : 2015 | GUIDANCE ON OUTSOURCING (ISO 37500:2014) |
| BS EN ISO 12967-3:2011 | Health informatics. Service architecture Computational viewpoint |
| NASA CCSDS 652.1-M : ISSUE 2 | REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF CANDIDATE TRUSTWORTHY DIGITAL REPOSITORIES |
| 16/30302061 DC : 0 | BS 6349-5 - MARITIME WORKS - PART 5: CODE OF PRACTICE FOR DREDGING AND RECLAMATION |
| PD ISO/TR 10013:2001 | Guidelines for quality management system documentation |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| CLSI AUTO10 P : 1ED 2006 | AUTOVERIFICATION OF CLINICAL LABORATORY TEST RESULTS |
| I.S. EN ISO 13408-5:2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 5: STERILIZATION IN PLACE |
| I.S. EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| UNE-ISO GUIA 73:2010 IN | Risk management. Vocabulary |
| UNE-ISO 22300:2013 | Societal security — Terminology |
| I.S. EN 61249-2-23:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-23: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS, ECONOMIC GRADE, COPPER-CLAD |
| BS ISO/IEC 15504-1:2004 | Information technology. Process assessment Concepts and vocabulary |
| 16/30326649 DC : 0 | BS EN ISO 20184-1 - MOLECULAR IN-VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR FROZEN TISSUE - PART 1: ISOLATED RNA |
| I.S. EN 61987-10:2009 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 10: LISTS OF PROPERTIES (LOPS) FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL FOR ELECTRONIC DATA EXCHANGE - FUNDAMENTALS |
| BS ISO 27025:2010 | Space systems. Programme management. Quality assurance requirements |
| PD CEN/TR 16862:2015 | Plastics welding supervisor. Task, responsibilities, knowledge, skills and competence |
| BS IEC 60870-5-6 : 2006 | TELECONTROL EQUIPMENT AND SYSTEMS - PART 5-6: GUIDELINES FOR CONFORMANCE TESTING FOR THE IEC 60870-5 COMPANION STANDARDS |
| ISO 10018:2012 | Quality management Guidelines on people involvement and competence |
| I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA PLUS 15189 : 2010 | THE ISO 15189:2007 ESSENTIALS - A PRACTICAL HANDBOOK FOR IMPLEMENTING THE ISO 15189:2007 STANDARD FOR MEDICAL LABORATORIES |
| BS EN 61249-2-6:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS 123000:2001 | System of quality assessment. Generic specification. Printed boards |
| UNI ISO/TR 8550-2 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 2: SAMPLING BY ATTRIBUTES |
| 15/30318290 DC : 0 | BS EN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| BS EN 16311:2013 | Engineering services. Terminology to describe engineering services for industrial products |
| CEI EN 61249-4-16 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-16: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| ISO/TS 18864:2017 | Health informatics — Quality metrics for detailed clinical models |
| UNI EN 16431 : 2014 | RAILWAY APPLICATIONS - TRACK - HOLLOW SLEEPERS AND BEARERS |
| 12/30257214 DC : 0 | BS ISO 6707-2 - BUILDING AND CIVIL ENGINEERING - VOCABULARY - PART 2: CONTRACT TERMS |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| TR 103 386 : 1.1.1 | METHODS FOR TESTING AND SPECIFICATIONS (MTS) DEPLOYMENT OF MODEL-BASED AUTOMATED TESTING INFRASTRUCTURE IN A CLOUD |
| 14/30273794 DC : 0 | BS ISO/IEC 16350 - SYSTEMS AND SOFTWARE ENGINEERING - APPLICATION MANAGEMENT |
| 12/30264441 DC : 0 | BS ISO 16049-2 - AIR CARGO EQUIPMENT - RESTRAINT STRAPS - PART 2: UTILIZATION GUIDELINES AND LASHING CONDITIONS |
| BS EN 62507-1:2011 | Identification systems enabling unambiguous information interchange. Requirements Principles and methods |
| UNI EN ISO 14050 : 2010 | ENVIRONMENTAL MANAGEMENT - VOCABULARY |
| 04/30090382 DC : DRAFT NOV 2004 | ISO 13408-5 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 5: CLEANING IN PLACE |
| BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
| DIN EN 15234-1:2011-05 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| DIN ISO 13065 E : 2017 | SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015) |
| BS EN 61249-2-42:2010 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Brominated epoxide non-woven / woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| BS ISO/IEC 19770-1:2017 | Information technology. IT asset management IT asset management systems. Requirements |
| 17/30359420 DC : 0 | BS ISO 10001 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| BS EN 61249-4-12:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability |
| I.S. EN ISO 22300:2018 | SECURITY AND RESILIENCE - VOCABULARY (ISO 22300:2018) |
| PD CEN/TR 13695-2:2004 | Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment |
| 15/30328933 DC : 0 | BS EN 9100 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| BS ISO 55000:2014 | Asset management Overview, principles and terminology |
| CSA Z24512 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| PD ISO/TR 13014:2012 | Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| SAE AS 9100D : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| BS 4778-1:1987 | Quality vocabulary International terms |
| BS EN ISO 14065:2013 | Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition |
| SAE AS 9133 : 2016 | QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| BS ISO/IEC 15944-9:2015 | Information technology. Business Operational View Business transaction traceability framework for commitment exchange |
| BS ISO 15859-9:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Argon |
| 15/30323537 DC : 0 | BS EN 16887 - LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| DIN EN ISO 11608-5:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| 02/202973 DC : 0 | IEC 60832-2. ED.2 - LIVE WORKING - INSULATING STICKS AND ATTACHABLE UNIVERSAL DEVICES (FITTINGS) - PART 2: ATTACHABLE UNIVERSAL DEVICES (FITTINGS) |
| ACMP-2000 : 2017 | POLICY ON CONFIGURATION MANAGEMENT |
| BS EN 50397-2:2009 | Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC Accessories for covered conductors. Tests and acceptance criteria |
| BS EN 15838:2009 | Customer contact centres. Requirements for service provision |
| BS EN ISO 17100 : 2015 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES |
| BS EN 61249-4-5:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad Polymide, modified or unmodified, woven E-glass prepeg of defined flammability |
| 16/30346829 DC : 0 | BS ISO 16038 - MALE CONDOMS - GUIDANCE ON THE USE OF ISO 4074 AND ISO 23409 IN THE QUALITY MANAGEMENT CONDOMS |
| PD ISO/TS 81346-3:2012 | Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations Application rules for a reference designation system |
| 14/30280137 DC : 0 | BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| BS ISO 24516-3:2017 | Guidelines for the management of assets of water supply and wastewater systems Wastewater collection networks |
| 14/30297267 DC : 0 | BS ISO/IEC/IEEE 15288 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
| UNI ISO 7870-4 : 2014 | CONTROL CHARTS - PART 4: CUMULATIVE SUM CHARTS |
| BS ISO 16919:2014 | Space data and information transfer systems. Requirements for bodies providing audit and certification of candidate trustworthy digital repositories |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| I.S. EN ISO 3834-1:2006 | QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 1: CRITERIA FOR THE SELECTION OF THE APPROPRIATE LEVEL OF QUALITY REQUIREMENTS |
| I.S. EN 15628:2014 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| PD ISO/TR 14062:2002 | Environmental management. Integrating environmental aspects into product design and development |
| 17/30347919 DC : 0 | BS ISO 10005 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| CSA ISO 8319-1 : 0 | ORTHOPAEDIC INSTRUMENTS - DRIVE CONNECTIONS - PART 1: KEYS FOR USE WITH SCREWS WITH HEXAGON SOCKET HEADS |
| 14/30298043 DC : 0 | BS EN 61069-8 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 8: ASSESSMENT OF OTHER SYSTEM PROPERTIES |
| DIN EN 15838 E : 2010 | CUSTOMER CONTACT CENTRES - REQUIREMENTS FOR SERVICE PROVISION |
| 17/30354892 DC : 0 | BS ISO 10290 - TEXTILES - COTTON YARNS - BASIS FOR SPECIFICATION |
| I.S. EN ISO 21351:2005 | SPACE SYSTEMS - FUNCTIONAL AND TECHNICAL SPECIFICATIONS |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| I.S. EN 1614:2006 | HEALTH INFORMATICS - REPRESENTATION OF DEDICATED KINDS OF PROPERTY IN LABORATORY MEDICINE |
| UNI ISO/TS 22002-3 : 2013 | PREREQUISITE PROGRAMMES ON FOOD SAFETY - PART 3: FARMING |
| PD CEN/TS 13598-3:2012 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for assessment of conformity |
| 11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
| BS ISO 10018:2012 | Quality management. Guidelines on people involvement and competence |
| BS ISO/IEC 26513:2009 | Systems and software engineering. Requirements for testers and reviewers of user documentation |
| 02/400807 DC : DRAFT SEP 2002 | BS EN 14534 - POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR BULK MAIL |
| 07/30162849 DC : 0 | BS ISO/IEC 19796-3 - INFORMATION TECHNOLOGY FOR LEARNING, EDUCATION AND TRAINING - QUALITY - MANAGEMENT, ASSURANCE AND METRICS - PART 3: REFERENCE METHODS AND METRICS |
| BS IEC 61513:2011 | Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
| DIN ISO/IEC 27000:2015-12 (Draft) | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| 07/30160567 DC : 0 | BS ISO/IEC 26514 - SOFTWARE AND SYSTEMS ENGINEERING - USER DOCUMENTATION REQUIREMENTS FOR DOCUMENTATION DESIGNERS AND DEVELOPERS |
| DEFSTAN 91-66/2(1995) : 1995 | THE SEGREGATION, HANDLING AND QUALITY ASSURANCE OF PETROLEUM FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
| BS 5703(2011) : 2011 | CONTROL CHARTS - PART 4: CUMULATIVE SUM CHARTS |
| BS EN ISO 12967-2:2011 | Health informatics. Service architecture Information viewpoint |
| BS ISO 16049-2:2013 | Air cargo equipment. Restraint straps Utilization guidelines and lashing calculations |
| PD CEN/TR 15569:2009 | Solid biofuels. A guide for a quality assurance system |
| BS EN 60936-1:2000 | Maritime navigation and radiocommunication equipment and systems. Radar Shipborne radar. Performance requirements. Methods of testing and required test results |
| BS EN ISO/IEC 80079-34:2011 | Explosive atmospheres Application of quality systems for equipment manufacture |
| 17/30355218 DC : 0 | BS ISO 16091 - SPACE SYSTEMS - INTEGRATED LOGISTIC SUPPORT |
| 14/30298720 DC : 0 | BS ISO/IEC 15944-9 - INFORMATION TECHNOLOGY - BUSINESS OPERATIONAL VIEW - PART 9: BUSINESS TRANSACTION TRACEABILITY FRAMEWORK FOR COMMITMENT EXCHANGE |
| PD ISO GUIDE 73:2009 | Risk management. Vocabulary |
| PD IEC/TR 62572-2:2008 | Fibre optic active components and devices. Reliability standards Laser module degradation |
| 02/206916 DC : DRAFT MAY 2002 | IEC 62237. ED.1 - LIVE WORKING - INSULATING HOSES FOR USE WITH HYDRAULIC TOOLS AND EQUIPMENT |
| I.S. EN 60601-1-10:2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| DIN EN 1474-2:2009-02 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
| 02/203838 DC : DRAFT MAR 2002 | |
| BS ISO 16363:2012 | Space data and information transfer systems. Audit and certification of trustworthy digital repositories |
| ISO 21350:2007 | Space systems — Off-the-shelf item utilization |
| 12/30256977 DC : 0 | BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| BS ISO/IEC 27036-1:2014 | Information technology. Security techniques. Information security for supplier relationships Overview and concepts |
| BS EN 16603-40:2014 | Space engineering Software |
| 09/30182865 DC : 0 | BS ISO 29463-1 - HIGH EFFICIENCY FILTERS AND FILTER MEDIA FOR REMOVING PARTICLES FROM AIR - PART 1: CLASSIFICATION, PERFORMANCE, TESTING AND MARKING |
| OIML D 27 : 2001 | INITIAL VERIFICATION OF MEASURING INSTRUMENTS UTILIZING THE MANUFACTURER'S QUALITY MANAGEMENT SYSTEM |
| BS ISO 22263:2008 | Organization of information about construction works. Framework for management of project information |
| ISO 22837:2009 | Vehicle probe data for wide area communications |
| 11/30249749 DC : 0 | BS EN 9110 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| I.S. EN ISO 13940:2016 | HEALTH INFORMATICS - SYSTEM OF CONCEPTS TO SUPPORT CONTINUITY OF CARE (ISO 13940:2015) |
| CEI EN 62474 : 2013 | MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| CEI EN 62343-2 : 2015 | DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION |
| 03/307006 DC : DRAFT APR 2003 | ISO 20683-2 - AIRCRAFT GROUND EQUIPMENT - TOWBARLESS TOWING VEHICLE (TLTV) - DESIGN, TESTING AND MAINTENANCE REQUIREMENTS - PART 2: REGIONAL AIRCRAFT |
| BS ISO/IEC 26512:2011 | Systems and software engineering. Requirements for acquirers and suppliers of user documentation |
| I.S. EN 60966-2-1:2009 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES |
| BS ISO 14026 : 2017 | ENVIRONMENTAL LABELS AND DECLARATIONS - PRINCIPLES, REQUIREMENTS AND GUIDELINES FOR COMMUNICATION OF FOOTPRINT INFORMATION |
| 07/30160561 DC : 0 | BS ISO/IEC 12207 - SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| 14/30287753 DC : 0 | BS EN 62304 AMENDMENT 1 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES |
| BS ISO/IEC 33001:2015 | Information technology. Process assessment. Concepts and terminology |
| 13/30258396 DC : 0 | BS ISO 17582 - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR ELECTORAL ORGANIZATIONS AT ALL LEVELS OF GOVERNMENT |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| BS ISO 3951-4:2011 | Sampling procedures for inspection by variables Procedures for assessment of declared quality levels |
| BS ISO 15378 : 2006 AMD 17315 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| 03/102246 DC : DRAFT SEP 2003 | ISO 21747 - PROCESS PERFORMANCE AND CAPABILITY STATISTICS |
| DIN EN ISO 25378:2011-12 | Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
| UNI EN 16457 : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| BS ISO 24113:2011 | Space systems. Space debris mitigation requirements |
| 05/30129859 DC : DRAFT FEB 2005 | EN 15161 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - INSPECTION, OPERATION, MAINTENANCE AND REPAIR |
| UNI CEI ISO/IEC TS 17021-2 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
| BS ISO 20683-1:2005 | Aircraft ground equipment. Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear Main-line aircraft |
| DD CEN ISO/TS 29001:2011 | Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations |
| I.S. EN 61249-2-43:2016 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-43: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| 09/30214226 DC : 0 | BS EN 60079-19 - EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION |
| 11/30229715 DC : 0 | BS EN ISO/IEC 17020 - CONFORMITY ASSESSMENT - GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
| 16/30331322 DC : 0 | BS EN ISO 20166-2 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATIONS PROCESSES FOR FORMALIN-FIXED AND PARAFFIN-EMBEDDED (FFPE) TISSUE - PART 2: ISOLATED PROTEINS |
| DIN EN ISO 11607-2:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006 + AMD 1.:2014) |
| 16/30339654 DC : 0 | BS EN ISO/IEC 17021-2 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
| 17/30344601 DC : 0 | BS EN ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| 13/30278952 DC : 0 | BS EN 16372 - AESTHETIC SURGERY AND AESTHETIC NON-SURGICAL MEDICAL SERVICES |
| 03/102154 DC : DRAFT MAY 2003 | CEN TS 14632 - PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS ISO 15859-5:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Nitrogen tetroxide propellants |
| BS EN 61355:1997 | Classification and designation of documents for plants, systems and equipment |
| DIN EN ISO 13408-1:2015-12 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013) |
| 03/316232 DC : DRAFT OCT 2003 | |
| 12/30244420 DC : 0 | BS ISO 13304 - RADIOLOGICAL PROTECTION - MINIMUM CRITERIA FOR ELECTRON PARAMAGNETIC RESONANCE (EPR) SPECTROSCOPY FOR RETROSPECTIVE DOSIMETRY OF IONIZING RADIATION |
| IEC 60300-3-11:2009 | Dependability management - Part 3-11: Application guide - Reliability centred maintenance |
| BS ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| PD CEN/CLC ISO/IEC TS 17021-2:2016 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of environmental management systems |
| BS ISO/IEC/IEEE 29148 : 1900 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - REQUIREMENTS ENGINEERING |
| BS ISO 15859-10:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Water |
| 11/30214150 DC : 0 | BS ISO 20121 - EVENT SUSTAINABILITY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| SAE AMS 2980 : 2014 | CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 0 - INTRODUCTION |
| DD CEN/TS 15359:2006 | Solid recovered fuels. Specifications and classes |
| 15/30179639 DC : 0 | BS EN 14508 - POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| BS EN 61511-1 : 2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS (IEC 61511-1:2016 + COR1:2016) |
| UNE-ISO/IEC TS 17021-2:2013 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems. Part 2: Competence requirements for auditing and certification of environmental management systems |
| 12/30252545 DC : 0 | BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| 17/30301531 DC : 0 | BS ISO 14026 - ENVIRONMENTAL LABELS AND DECLARATIONS - PRINCIPLES, REQUIREMENTS AND GUIDELINES FOR COMMUNICATION OF FOOTPRINT INFORMATION |
| ISO 15859-2:2004 | Space systems Fluid characteristics, sampling and test methods Part 2: Hydrogen |
| DIN EN ISO 23611-6:2013-11 | SOIL QUALITY - SAMPLING OF SOIL INVERTEBRATES - PART 6: GUIDANCE FOR THE DESIGN OF SAMPLING PROGRAMMES WITH SOIL INVERTEBRATES (ISO 23611-6:2012) |
| I.S. EN 61193-3:2013 | QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV)) |
| CAN/CSA-ISO/IEC 27013:16 | Information technology - Security techniques - Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1 (Adopted ISO/IEC 27013:2015, second edition, 2015-12-01) |
| 10/30216654 DC : 0 | BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| API Q2 RUSSIAN : 2014 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| BS EN 16679:2014 | Packaging. Tamper verification features for medicinal product packaging |
| BS EN 15221-3:2011 | Facility Management Guidance on quality in Facility Management |
| BS EN ISO 13940:2016 | Health informatics. System of concepts to support continuity of care |
| DD CEN/TS 15234:2006 | Solid biofuels. Fuel quality assurance |
| CSA ISO 26000 : 2016 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| IEC 61506:1997 | Industrial-process measurement and control - Documentation ofapplication software |
| 12/30254896 DC : 0 | BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION |
| BS ISO 14470:2011 | Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
| DIN EN ISO 17100:2016-05 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES (ISO 17100:2015/AMD.1:2017) |
| UNI CEN/TR 15569 : 2009 | SOLID BIOFUELS - A GUIDE FOR A QUALITY ASSURANCE SYSTEM |
| UNI EN ISO 13408-5 : 2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 5: STERILIZATION IN PLACE |
| 14/30270614 DC : 0 | BS EN 14065 - TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| IEC 60966-4:2003 | Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies |
| UNI CEI EN 16001 : 2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| SAE AS 6171/7 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY ELECTRICAL TEST METHODS |
| CSA E60384.1 : 2014 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| CSA S471 : 2004 | GENERAL REQUIREMENTS, DESIGN CRITERIA, THE ENVIRONMENT, AND LOADS |
| BS ISO/IEC 15504-5:2012 | Information technology. Process assessment An exemplar software life cycle process assessment model |
| CSA Z14161 : 2011 : R2015 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| ISO/TS 15530-4:2008 | Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation |
| EN IEC 61249-2-46:2018 | Materials for printed boards and other interconnecting structures – Part 2-46: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 82304-1:2017 | Health Software - Part 1: General requirements for product safety |
| 12/30255191 DC : 0 | BS ISO 11505 - SURFACE CHEMICAL ANALYSIS - GENERAL PROCEDURES FOR QUANTITATIVE COMPOSITIONAL DEPTH PROFILING BY GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY |
| 10/30219009 DC : 0 | BS EN 15234-1 - SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| NF EN 61249-2-41 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| EN ISO 17511:2003 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| BS ISO 14955-1:2017 | Machine tools. Environmental evaluation of machine tools Design methodology for energy-efficient machine tools |
| BS EN 61249-2-30:2013 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad |
| PD CEN/TR 16469:2013 | Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
| BS ISO/IEC 19796-1 : 2005 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| 17/30365666 DC : 0 | BS EN 62474 - MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY |
| UNE-EN 9120:2011 | Quality Management Systems - Requirements for Aviation, Space and Defence Distributors |
| BS ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| BS EN 61249-2-21:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| 16/30283980 DC : 0 | BS EN ISO 9241-220 - ERGONOMICS OF HUMAN-COMPUTER INTERACTION - PART 220: PROCESSES FOR ENABLING, EXECUTING AND ASSESSING HUMAN-CENTRED DESIGN WITHIN ORGANIZATIONS |
| 16/30317608 DC : 0 | BS ISO/IEC/IEEE 26513 - SYSTEMS AND SOFTWARE ENGINEERING - REQUIREMENTS FOR TESTERS AND REVIEWERS OF USER DOCUMENTATION |
| BS EN 61249-2-40:2013 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| 13/30284691 DC : 0 | BS ISO/IEC 27000 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY |
| 15/30289283 DC : 0 | BS EN 14516 - BATHS FOR DOMESTIC PURPOSES |
| IEEE 1413.1 : 2002 | SELECTING AND USING RELIABILITY PREDICTIONS BASED ON IEEE 1413 |
| IEEE 24774-2012 | IEEE Guide--Adoption of ISO/IEC TR 24474:2010 Systems and Software Engineering-- Life Cycle Management--Guidelines for Process Description |
| 08/30172145 DC : DRAFT FEB 2008 | BS EN 16001 - ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| BS EN 9117:2017 | Aerospace series. Delegated Product Release Verification |
| 04/30090379 DC : DRAFT MAR 2004 | BS ISO 13408-4 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 4: CLEAN-IN-PLACE TECHNOLOGIES |
| BS ISO 17824 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
| PD ISO/IEC TR 20000-4:2010 | Information technology. Service management Process reference model |
| 11/30231694 DC : 0 | BS EN 62040-4 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING |
| 04/30048205 DC : DRAFT JUL 2004 | BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO 11073-90101:2008 | Health informatics. Point-of-care medical device communication Analytical instruments. Point-of-care test |
| BS EN 61249-2-37:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| BS ISO 24516-1:2016 | Guidelines for the management of assets of water supply and wastewater systems Drinking water distribution networks |
| CSA S472 : 2004 | FOUNDATIONS |
| 02/400011 DC : DRAFT JAN 2002 | ISO 14001 - ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| 03/305172 DC : DRAFT MAR 2003 | ISO 16412 - AIR CARGO EQUIPMENT - AIR CARGO PALLETS - UTILIZATION GUIDELINES |
| DD ENV 61111:2002 | Matting of insulating material for electrical purposes |
| CEI EN 61249-2-23 : 2005 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-23: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES DE PAPIER CELLULOSE PHENOLIQUE NON HALOGENE, DE QUALITE ECONOMIQUE, PLAQUEES CUIVRE |
| DD CEN/TS 15675:2007 | Air quality. Measurement of stationary source emissions. Application of EN ISO/IEC 17025:2005 to periodic measurements |
| 07/30170374 DC : DRAFT AUG 2007 | BS EN 61751-2 - LASER MODULES USED FOR TELECOMMUNICATIONS - RELIABILITY ASSESSMENT - PART 2: TECHNICAL REPORT ON LASER MODULE DEGRADATION |
| BS ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach |
| BS ISO 16962:2017 | Surface chemical analysis. Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry |
| I.S. EN 61508-2:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
| IEC 61196-1-1:1995 | COAXIAL COMMUNICATION CABLES - PART 1-1: CAPABILITY APPROVAL FOR COAXIAL CABLES |
| UNE-CEN/TR 15628:2011 IN | Maintenance - Qualification of Maintenance personnel |
| BS ISO 18400-106:2017 | Soil quality. Sampling Quality control and quality assurance |
| DD CEN/TS 15718:2011 | Railway applications. Wheelsets and bogies. Product requirements for cast wheels |
| 15/30303073 DC : 0 | BS ISO 25841 - FEMALE CONDOMS - REQUIREMENTS AND TEST METHODS |
| BS EN 61249-2-9:2003 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Reinforced base materials clad and unclad. Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| 16/30314699 DC : 0 | BS ISO 37001 - ANTI-BRIBERY MANAGEMENT SYSTEMS |
| BS ISO 13065:2015 | Sustainability criteria for bioenergy |
| CSA ISO 14044 : 2006 : R2011 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
| UNE-ISO 20121:2013 | Event sustainability management systems. Requirements with guidance for use. |
| BS EN 50237:2000 | Gloves and mitts with mechanical protection for electrical purposes |
| API 11D1 REDLINE : 2009 | PACKERS AND BRIDGE PLUGS |
| CSA ISO TS 14048 : 2003 : R2012 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - DATA DOCUMENTATION FORMAT |
| I.S. CEN TS 15234:2006 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE |
| BS ISO/IEC 15939:2007 | Systems and software engineering. Measurement process |
| BS ISO 10381-3:2001 | Soil quality. Sampling Guidance on safety |
| 09/30204355 DC : 0 | ISO/TS 10004 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| PD ISO/TS 19264-1:2017 | Photography. Archiving systems. Image quality analysis Reflective originals |
| BS EN 61249-2-5:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad |
| S.R. CEN/TR 14245:2014 | CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
| 04/30075589 DC : DRAFT JUL 2004 | BS ISO 22000 - FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS |
| UNE-EN ISO 17989-1:2016 | Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015) |
| 13/30282202 DC : 0 | BS EN 16622 - HYDRAULIC SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| BS EN 15593:2008 | Packaging. Management of hygiene in the production of packaging for foodstuffs. Requirements |
| BS ISO 3999:2004 | Radiation protection. Apparatus for industrial gamma radiography. Specifications for performance, design and tests |
| 08/30176347 DC : DRAFT MAR 2008 | BS ISO 12967-1 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 1: ENTERPRISE VIEWPOINT |
| UNE-ISO/IEC 20000-1:2011 | Information technology. Service management. Part 1: Service Management System requirements |
| CEI EN 60469 : 2014 | TRANSITIONS, PULSES AND RELATED WAVE FORMS - TERMS, DEFINITIONS AND ALGORITHMS |
| CEI EN 61249-4-2 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| I.S. EN ISO 12967-2:2011 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 2: INFORMATION VIEWPOINT |
| CSA ISO 14025:2007 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| SAE AS 9104/2A : 2014 | REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 9133:2005 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PARTS |
| 08/30184312 DC : DRAFT SEP 2008 | BS EN 12952-6 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| CEI UNI EN ISO/IEC 17050-1 : 2010 | CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| CEI EN 61508-7 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
| BS EN ISO 9003:1994 | Quality systems. Model for quality assurance in final inspection and test |
| ISO 16412:2005 | Air cargo equipment Air cargo pallets Utilization guidelines |
| I.S. EN 61249-2-8:2003 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-8: REINFORCED BASE MATERIALS CLAD AND UNCLAD - MODIFIED BROMINATED EPOXIDE WOVEN FIBREGLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| CSA ISO/IEC 16085 : 2007 : R2012 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| CEI EN 61249-2-30 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-30: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE MODIFIED CYANATE ESTER WOVEN GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| DD CEN/TS 15357:2006 | Solid recovered fuels. Terminology, definitions and descriptions |
| CSA ISO/IEC 12207 :2009 | SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| DD CEN/TS 12201-7:2003 | Plastics piping systems for water supply. Polyethylene (PE) Guidance for the assessment of conformity |
| BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| CEI EN 60300-3-11 : 2011 | DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE |
| CEI EN 60393-1 : 2010 | POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| PREN 9133 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| BS EN 60872-3:2001 | Maritime navigation and radiocommunication equipment and systems. Radar plotting aids Electronic plotting aid (EPA). Performance requirements. Methods of testing and required test results |
| SAE AS 7001 : 2017 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) PROGRAM DESCRIPTION |
| SAE AS 9016 : 2015 | AEROSPACE SERIES - NOTICE OF CHANGE (NOC) REQUIREMENTS |
| CSA ISO/TS 16949 : 2009(R2015) | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| SAE AS 6174 : 2014 | COUNTERFEIT MATERIEL - ASSURING ACQUISITION OF AUTHENTIC AND CONFORMING MATERIEL |
| I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| UNI CEI EN ISO/IEC 17021 : 2011 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS |
| ISO 22966:2009 | Execution of concrete structures |
| UNI ISO 5598 : 2012 | FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
| UNI ISO 18091 : 2014 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2008 IN LOCAL GOVERNMENT |
| DIN EN ISO 17989-1 E : 2016 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015) |
| XP PREN 9100 : E2009 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| CSA ISO/IEC 15504-5:2013 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 5: AN EXEMPLAR SOFTWARE LIFE CYCLE PROCESS ASSESSMENT MODEL |
| DIN EN 15357 E : 2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| UNI EN 15358 : 2011 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| ISO 7504:2015 | Gas analysis Vocabulary |
| CEN Guide 14:2010 | Common policy guidance for addressing standardisation on qualification of professions and personnel |
| UNI ISO 11462-1 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC |
| CSA ISO 10006 : 2003 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS |
| BS EN 60895:2003 | Live working. Conductive clothing for use at a nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| CEI EN 62402 : 2008 | OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE |
| UNE-EN 16114:2012 | Management consultancy services |
| I.S. EN 62366-1:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| I.S. ISO 10003:2007 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| XP PREN 9200 : 2002 XP | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDELINES FOR PROJECT MANAGEMENT SPECIFICATION |
| UNE-EN ISO 15378:2016 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015) |
| CSA ISO/IEC 15939 : 2008 (R2018) | SYSTEMS AND SOFTWARE ENGINEERING - MEASUREMENT PROCESS |
| I.S. EN 15593:2008 | PACKAGING - MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS |
| IEEE 90003-2015 | IEEE Standard Adoption of ISO/IEC 90003:2014, Software Engineering -- Guidelines for the Application of ISO 9001:2008 to Computer Software |
| IEC TR 62154:2005 | Terminology in the area of information structures, documentation and graphical symbols |
| IWA 14-2:2013 | Vehicle security barriers — Part 2: Application |
| IEC 61249-2-40:2012 | Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials, clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| CSA ISO/IEC 20000-1 : 2013 : R2017 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| ISO 15859-6:2004 | Space systems Fluid characteristics, sampling and test methods Part 6: Monomethylhydrazine propellant |
| I.S. EN 9104-003:2010 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION |
| DIN EN 16622:2016-02 | SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| I.S. EN 61511-1:2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE (UON) - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
| SAE AS 9131 : 2012 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - NONCONFORMANCE DATA DEFINITION AND DOCUMENTATION |
| UNI EN ISO 14065 : 2013 | GREENHOUSE GASES - REQUIREMENTS FOR GREENHOUSE GAS VALIDATION AND VERIFICATION BODIES FOR USE IN ACCREDITATION OR OTHER FORMS OF RECOGNITION |
| NF EN 3685 : 2008 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION |
| CEI EN 61249-2-9 : 2004 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-9: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE, MODIFIED EPOXIDE OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| IEC 61249-2-45:2018 | Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
| NFPA 2112 : 2018 | FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE |
| CEI EN 61249-2-22 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-22: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| ISO/TR 80002-2:2017 | Medical device software — Part 2: Validation of software for medical device quality systems |
| CEI EN 50069 : 1998 | WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| ISO/TS 19930:2017 | Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 |
| I.S. EN ISO 17034:2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016) |
| ISO 8000-102:2009 | Data quality Part 102: Master data: Exchange of characteristic data: Vocabulary |
| DIN EN 16214-1:2012-11 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY |
| EN 14428:2015 | Shower enclosures - Functional requirements and test methods |
| ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| BS ISO 10001:2007 | Quality management. Customer satisfaction. Guidelines for codes of conduct for organizations |
| I.S. EN 16603-40:2014 | SPACE ENGINEERING - PART 40: SOFTWARE |
| I.S. EN 16372:2014 | AESTHETIC SURGERY SERVICES |
| BS EN 61243-3:2014 | Live working. Voltage detectors Two-pole low-voltage type |
| CSA Z24511 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
| I.S. EN 1325:2014 | VALUE MANAGEMENT - VOCABULARY - TERMS AND DEFINITIONS |
| S.R. CWA 15833:2008 | HUMANITARIAN MINE ACTION - QUALITY MANAGEMENT - QUALITY ASSURANCE (QA) AND QUALITY CONTROL (QC) FOR MECHANICAL DEMINING |
| ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| I.S. EN 61249-2-36:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-36: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| BS EN ISO 13408-1:2015 | Aseptic processing of health care products General requirements |
| ISO 8000-8:2015 | Data quality — Part 8: Information and data quality: Concepts and measuring |
| I.S. EN 16603-10-06:2014 | SPACE ENGINEERING - PART 10-06: TECHNICAL REQUIREMENTS SPECIFICATION |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| IEEE 24748-3-2012 | IEEE Guide--Adoption of ISO/IEC TR 24748-3:2011,Systems and Software Engineering--Life Cycle Management-- Part 3: Guide to the Application of ISO/IEC 12207 (Software Life Cycle Processes) |
| CEI EN 60300-3-16 : 2010 | DEPENDABILITY MANAGEMENT - PART 3-16: APPLICATION GUIDE - GUIDELINES FOR SPECIFICATION OF MAINTENANCE SUPPORT SERVICES |
| I.S. EN 15221-4:2011 | FACILITY MANAGEMENT - PART 4: TAXONOMY, CLASSIFICATION AND STRUCTURES IN FACILITY MANAGEMENT |
| ISO 14298:2013 | Graphic technology Management of security printing processes |
| EN 60601-1-10:2008/A1:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS (IEC 60601-1-10:2007) |
| S.R. CWA 16275:2011 | GUIDELINES FOR THE SELECTION OF CONSULTANTS ADVISING SMES ON INTEGRATED QUALITY, ENVIRONMENT, HEALTH AND SAFETY MANAGEMENT SYSTEMS |
| I.S. EN 16323:2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| CSA ISO 50001 : 2011 : R2016 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| CSA ISO 8319-2 : 0 | ORTHOPAEDIC INSTRUMENTS - DRIVE CONNECTIONS - PART 2: SCREWDRIVERS FOR SINGLE SLOT HEAD SCREWS, SCREWS WITH CRUCIATE SLOT AND CROSS-RECESSED HEAD SCREWS |
| NF EN 61249-2-42 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| AQAP 2105 : 2 | NATO REQUIREMENTS FOR DELIVERABLE QUALITY PLANS |
| CEI EN 61249-2-35 : 2010 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-35: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES EN TISSU DE VERRE DE TYPE E EPOXYDE MODIFIE, PLAQUEES CUIVRE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE) POUR LES ASSEMBLAGES SANS PLOMB |
| I.S. EN 16887:2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| OLF 072 : 2002 | OLF GUIDELINE FOR ACCEPTANCE CRITERIA FOR OFFSHORE SERVICE VESSELS |
| IEC 61511-1 REDLINE : 2ED 2016 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS |
| I.S. EN ISO/IEC 17065:2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES (ISO/IEC 17065:2012) |
| I.S. EN ISO 17100:2015 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES (ISO 17100:2015) |
| I.S. EN ISO/IEC 80079-34:2011 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| CEI EN 61249-4-14 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-14: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| S.R. CEN TS 15675:2007 | AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - APPLICATION OF EN ISO/IEC 17025:2005 TO PERIODIC MEASUREMENTS |
| AAMI/ISO TIR 80002-2:2017 | MEDICAL DEVICE SOFTWARE - PART 2: VALIDATION OF SOFTWARE FOR MEDICAL DEVICE QUALITY SYSTEMS |
| I.S. CEN TS 15359:2006 | SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
| I.S. EN 9115:2013 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS - DELIVERABLE SOFTWARE (SUPPLEMENT TO EN 9100) |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 9277:2015 | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDE FOR THE MANAGEMENT OF SYSTEMS ENGINEERING |
| I.S. EN 60300-3-11:2009 | DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE |
| AAMI ISO 11737-2 : 2009 : R2014 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| I.S. EN 61249-2-39:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-39: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE EPOXIDE AND NON-EPOXIDE, WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY (IEC 61249-2-39:2012 (EQV)) |
| I.S. EN 61249-4-12:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-12: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - NON-HALOGENATED MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| I.S. EN ISO 25378:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS |
| S.R. CEN/CLC ISO/IEC/TS 17021-2:2016 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-2:2012) |
| ISO/TS 13811:2015 | Tourism and related services — Guidelines on developing environmental specifications for accommodation establishments |
| CEI EN 61249-2-41 : 2011 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| I.S. EN ISO/IEC 27043:2016 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES INCIDENT INVESTIGATION PRINCIPLES AND PROCESSES (ISO/IEC 27043:2015) |
| AAMI ISO 11737-2 :2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| PREN 2943 : DRAFT 2014 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING - TECHNICAL SPECIFICATION |
| I.S. EN ISO 12967-1:2011 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 1: ENTERPRISE VIEWPOINT |
| BS EN 9101:2015 | Quality Management Systems. Audit Requirements for Aviation, Space, and Defence Organisations |
| I.S. EN 16457:2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| I.S. EN 15838:2009 | CUSTOMER CONTACT CENTRES - REQUIREMENTS FOR SERVICE PROVISION |
| I.S. EN 62388:2013 | MARITIME NAVIGATION AND RADIO COMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE RADAR - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 62388:2013 (EQV)) |
| ISO 11073-90101:2008 | Health informatics — Point-of-care medical device communication — Part 90101: Analytical instruments — Point-of-care test |
| EN ISO 50001:2011 | Energy management systems - Requirements with guidance for use (ISO 50001:2011) |
| I.S. ISO 10001:2007 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| ISO 16049-2:2013 | Air cargo equipment Restraint straps Part 2: Utilization guidelines and lashing calculations |
| ISO 22514-4:2016 | Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
| S.R. CLC/TR 50674:2018 | GUIDELINES FOR THE VERIFICATION OF HOUSEHOLD APPLIANCES UNDER ENERGY LABELLING AND ECO DESIGN |
| UNE-EN 60300-3-11:2013 | Dependability management -- Part 3-11: Application guide - Reliability centred maintenance |
| I.S. EN 50239:2018 | RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING APPLICATION |
| ISO 10006:2017 | Quality management — Guidelines for quality management in projects |
| I.S. EN ISO 13408-4:2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 4: CLEAN-IN-PLACE TECHNOLOGIES |
| EI 1584 : 2017 | FOUR-INCH HYDRANT SYSTEM COMPONENTS AND ARRANGEMENTS |
| I.S. EN IEC 61249-2-45:2018 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-45: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NONHALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF THERMAL CONDUCTIVITY (1.0W/M K) AND DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| ISO 9788:2017 | Air cargo — Double stud tie-down fittings — Design and testing requirements |
| I.S. EN ISO 23611-6:2013 | SOIL QUALITY - SAMPLING OF SOIL INVERTEBRATES - PART 6: GUIDANCE FOR THE DESIGN OF SAMPLING PROGRAMMES WITH SOIL INVERTEBRATES (ISO 23611-6:2012) |
| CEI UNI EN 12966-3 : 2009 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| AAMI ISO 11607-2:2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
| UNI CEN ISO/TS 14067 : 2014 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
| ISO 14620-2:2011 | Space systems Safety requirements Part 2: Launch site operations |
| ISO 37001:2016 | Anti-bribery management systems — Requirements with guidance for use |
| ISO 2230:2002 | Rubber products — Guidelines for storage |
| ISO/IEC 27034-1:2011 | Information technology — Security techniques — Application security — Part 1: Overview and concepts |
| AAMI ISO 11737-1 : 2006 : R2011 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
| GOST ISO 14698-2 : 2005 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA |
| CSA IEC 62366-1 : 2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| ISO/IEC 27000:2018 | Information technology — Security techniques — Information security management systems — Overview and vocabulary |
| ISO/PAS 17005:2008 | Conformity assessment Use of management systems Principles and requirements |
| PREN ISO 15189 : DRAFT 2011 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| ISO/IEC TS 24748-1:2016 | Systems and software engineering Life cycle management Part 1: Guidelines for life cycle management |
| UNI EN ISO 25378 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CHARACTERISTICS AND CONDITIONS - DEFINITIONS |
| BS ISO 26000:2010 | Guidance on social responsibility |
| I.S. EN 61249-2-9:2003 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| UNI EN ISO 14006 : 2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| UNE-ISO 16363:2017 | Space data and information transfer systems. Audit and certification of trustworthy digital repositories. |
| UNE 179007:2013 | Health services. Systems of quality management for assisted reproduction laboratories |
| ISO 13304-1:2013 | Radiological protection Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles |
| ISO 27025:2010 | Space systems — Programme management — Quality assurance requirements |
| I.S. EN 61249-2-35:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-35: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| I.S. EN 12764:2015 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| ISO 24516-3:2017 | Guidelines for the management of assets of water supply and wastewater systems — Part 3: Wastewater collection networks |
| ECA ILAC G26 : 2012 | GUIDANCE FOR THE IMPLEMENTATION OF A MEDICAL LABORATORY ACCREDITATION SYSTEM |
| CEN ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011) |
| UNI CEI ISO/IEC TS 17021-3 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEM |
| UNI ISO 2789 : 2014 | INFORMATION AND DOCUMENTATION - INTERNATIONAL LIBRARY STATISTICS |
| S.R. CEN/TS 15674:2007 | AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - GUIDELINES FOR THE ELABORATION OF STANDARDISED METHODS |
| BS EN ISO 19258:2011 | Soil quality. Guidance on the determination of background values |
| I.S. EN 61249-2-38:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-38: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| XP ISO/TS 22163 : 2017 XP | RAILWAY APPLICATIONS - QUALITY MANAGEMENT SYSTEM - BUSINESS MANAGEMENT SYSTEM REQUIREMENTS FOR RAIL ORGANIZATIONS: ISO 9001:2015 AND PARTICULAR REQUIREMENTS FOR APPLICATION IN THE RAIL SECTOR |
| ISO 37100:2016 | Sustainable cities and communities — Vocabulary |
| PREN 752 : DRAFT 2015 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - SEWER SYSTEM MANAGEMENT |
| UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| I.S. EN 61249-4-1:2008 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-1: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| EN 50239:2018 | Railway applications - Radio remote control system of traction vehicle for shunting application |
| UNE-EN 61508-4:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 4: Definitions and abbreviations |
| CEI UNI EN ISO/IEC 17065 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES |
| ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
| CAN/CSA-ISO/IEC 16350:16 | Information technology Systems and software engineering Application management (Adopted ISO/IEC 16350:2015, first edition, 2015-08-01) |
| API 19G1 : 2010 | SIDE-POCKET MANDRELS |
| BS ISO 10795:2011 | Space systems. Programme management and quality. Vocabulary |
| BS ISO 10002:2014 | Quality management. Customer satisfaction. Guidelines for complaints handling in organizations |
| EN 16991:2018 | Risk-based inspection framework |
| CSA C22.2 No. 60601-1-10 : 2009 : R2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
| NF EN ISO 17078-3 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| IEC 60384-1 REDLINE : 5ED 2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| ISO/IEC Guide 25:1990 | General requirements for the competence of calibration and testing laboratories |
| SAE AS 6332 : 2017 | AIRCRAFT GROUND DEICING/ANTI-ICING QUALITY MANAGEMENT |
| ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C) Part 7: Guidance for the assessment of conformity |
| ISO/IEC Guide 43-1:1997 | Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes |
| CEN/TR 13695-2:2004 | Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packaging, and their release into the environment |
| ASTM E 2708 : 2017-03 | TERMINOLOGY FOR ACCREDITATION AND CERTIFICATION |
| CEI UNI EN ISO/IEC 17000 : 2011 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| UNI ISO TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| ASTM D 5486/D5486M : 2006 | Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| ASTM E 2066 : 2000 | Standard Guide for Validation of Laboratory Information Management Systems |
| NF EN 61249-2-37 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| UNI EN ISO 9241-420 : 2011 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 420: SELECTION OF PHYSICAL INPUT DEVICES |
| UNI EN ISO 17078-3 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity |
| CSA ISO 10011-1 : 1994 | GUIDELINES FOR AUDITING QUALITY SYSTEMS - PART 1: AUDITING |
| TR 187 020 : 1.1.1 | RADIO FREQUENCY IDENTIFICATION (RFID); COORDINATED ESO RESPONSE TO PHASE 1 OF EU MANDATE M436 |
| DEFSTAN 02-526/2(2008) : 2008 | REQUIREMENTS FOR CABLES ELECTRIC, ELASTOMERIC, LIMITED FIRE HAZARD SHEATHED FOR GENERAL SERVICES |
| ASTM E 2239 : 2012 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
| S.R. CEN/TS 16919:2016 | POSTAL SERVICES - INTERFACE AND DATA TRANSFER FORMAT FOR CAPTURING POSTAL AUTOMATION EVENTS IDT-PAE |
| DIN EN ISO 11133:2015-01 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO 11133:2014, CORRECTED VERSION 2014-11-01) |
| ISO 15541:2016 | Ships and marine technology — Fire resistance of non-metallic hose assemblies and non-metallic compensators — Requirements for the test bench |
| EN ISO 14253-1:2017 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017) |
| ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) — Part 3: Global conformity assessment procedures (GCAP) — Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO/TS 16952-1:2006 | Technical product documentation Reference designation system Part 1: General application rules |
| I.S. EN 9110:2015 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| DIN EN ISO 14253-1:2013-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013) |
| I.S. EN 61340-5-2:1999 | ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE |
| I.S. EN 14726:2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| IEC 62065:2014 | Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results |
| IEC 61249-2-21:2003 | Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-31:2009 | Materials for printed boards and other interconnecting structures - Part 2-31: Reinforced base materials, clad and unclad - Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad |
| IEC PAS 61906:2005 | Procedure for the declaration of materials in products of the electrotechnical and electronic industry |
| IEC TR 61258:2008 | Guidelines for the development and use of medical electrical equipment educational materials |
| EN 62430:2009 | Environmentally conscious design for electrical and electronic products |
| DIN EN 197-2:2014-05 | CEMENT - PART 2: CONFORMITY EVALUATION |
| UNE-EN 12952-6:2012 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO/TR 13352:1997 | Guidelines for interpretation of ISO 9000 series for application within the iron ore industry |
| I.S. EN 1330-1:2014&LC:2015 | NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| ISO/IEC 15288:2008 | Systems and software engineering System life cycle processes |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete Vocabulary |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| IEC 61249-2-11:2003 | Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| I.S. EN ISO 14971:2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01) |
| IEC TS 62239:2008 | Process management for avionics - Preparation of an electronic components management plan |
| NFPA 1952 : 2015 | SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT |
| DIN EN ISO 17662:2016-09 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| DIN EN 13263-2:2009-07 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| DIN EN ISO 11064-7 E : 2006 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 7: PRINCIPLES FOR THE EVALUATION OF CONTROL CENTRES |
| DIN EN 12842:2012-11 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| DIN EN 14996 E : 2006 | WATER QUALITY - GUIDANCE ON ASSURING THE QUALITY OF BIOLOGICAL AND ECOLOGICAL ASSESSMENTS IN THE AQUATIC ENVIRONMENT |
| DIN EN 13352:2012-06 | Specification for the performance of automatic tank contents gauges |
| DIN EN 15259 E : 2008 | AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - REQUIREMENTS FOR MEASUREMENT SECTIONS AND SITES AND FOR THE MEASUREMENT OBJECTIVE, PLAN AND REPORT |
| DIN EN ISO 4074:2016-05 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| DIN EN 12159:2013-03 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| DIN EN 14679:2005-07 | Execution of special geotechnical works - Deep mixing |
| DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
| DIN EN 15259:2008-01 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
| DIN EN 15161 E : 2007 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - INSTALLATION, OPERATION, MAINTENANCE AND REPAIR |
| EN ISO 10993-1:2009/AC:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009/COR 1:2010) |
| DIN EN 1337-6:2004-08 | Structural bearings - Part 6: Rocker bearings |
| DIN EN 505:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| DIN EN 15049:2007-12 | Railway applications - Suspension components - Torsion bar, steel |
| DIN EN 14359:2011-04 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| UNE-EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| UNE-EN ISO 11608-3:2013 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
| UNE-EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| BS EN ISO 16106:2006 | Packaging. Transport packages for dangerous goods. Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. Guidelines for the application of ISO 9001 |
| BS EN ISO 11737-2:2009 | Sterilization of medical devices. Microbiological methods Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| ISO 13408-5:2006 | Aseptic processing of health care products Part 5: Sterilization in place |
| UNE-EN 14065:2017 | Textiles - Laundry processed textiles - Biocontamination control system |
| ISO/IEC 27013:2015 | Information technology Security techniques Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1 |
| IEC 61249-2-9:2003 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| ISO 10002:2014 | Quality management Customer satisfaction Guidelines for complaints handling in organizations |
| BS EN 1614:2006 | Health informatics. Representation of dedicated kinds of property in laboratory medicine |
| BS EN 598 : 2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 14644-4:2001 | Cleanrooms and associated controlled environments. Design, construction and start-up |
| IEC 61987-10:2009 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: List of Properties (LOPs) for Industrial-Process Measurement and Control for Electronic Data Exchange - Fundamentals |
| IEC 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| DIN EN 15079:2015-07 | COPPER AND COPPER ALLOYS - ANALYSIS BY SPARK OPTICAL EMISSION SPECTROMETRY (S-OES) |
| UNE-EN 12186:2015 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
| 04/30124785 DC : 0 | EN 15069 - SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| BS EN 12435:2006 | Health informatics. Expression of results of measurements in health sciences |
| ISO/IEC TS 17021-2:2012 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for auditing and certification of environmental management systems |
| IEC 61249-4-5:2005 | Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability |
| UNE-EN 61508-7:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 7: Overview of techniques and measures |
| IEC 61249-2-26:2005 | Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| UNE-EN ISO 15189:2013 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| BS EN 287-1:2011 | Qualification test of welders. Fusion welding Steels |
| IEC 61069-8:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties |
| ISO 11240:2012 | Health informatics Identification of medicinal products Data elements and structures for the unique identification and exchange of units of measurement |
| ISO/IEC 27043:2015 | Information technology Security techniques Incident investigation principles and processes |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14698-1:2003 | Cleanrooms and associated controlled environments. Biocontamination control General principles and methods |
| BS EN 14516 : 2015 | BATHS FOR DOMESTIC PURPOSES |
| IEC 62508:2010 | Guidance on human aspects of dependability |
| IEC 61511-1:2016 RLV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| I.S. EN 3302:2017 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION |
| I.S. EN 12507:2005 | TRANSPORTATION SERVICES - GUIDANCE NOTES ON THE APPLICATION OF EN ISO 9001:2000 TO THE ROAD TRANSPORTATION, STORAGE, DISTRIBUTION AND RAILWAY GOODS INDUSTRIES |
| I.S. EN 486:2009 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUSION INGOTS - SPECIFICATIONS |
| I.S. EN 14508:2016 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| I.S. EN 13428:2004 | PACKAGING - REQUIREMENTS SPECIFIC TO MANUFACTURING AND COMPOSITION - PREVENTION BY SOURCE REDUCTION |
| I.S. EN 12798:2007 | TRANSPORT QUALITY MANAGEMENT SYSTEM - ROAD, RAIL AND INLAND NAVIGATION TRANSPORT - QUALITY MANAGEMENT SYSTEM REQUIREMENTS TO SUPPLEMENT EN ISO 9001 FOR THE TRANSPORT OF DANGEROUS GOODS WITH REGARD TO SAFETY |
| I.S. EN ISO 21649:2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| I.S. EN 598:2007 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14065:2016 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| I.S. EN 12842:2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN 14420-1:2013-09 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| DIN ISO 10381-2:2003-08 | SOIL QUALITY - SAMPLING - PART 2: GUIDANCE ON SAMPLING TECHNIQUES |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| DIN EN 1776:2016-05 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| EN ISO 12967-2:2011 | Health informatics - Service architecture - Part 2: Information viewpoint (ISO 12967-2:2009) |
| DIN ISO 10381-5:2007-02 | SOIL QUALITY - SAMPLING - PART 5: GUIDANCE ON THE PROCEDURE FOR THE INVESTIGATION OF URBAN AND INDUSTRIAL SITES WITH REGARD TO SOIL CONTAMINATION |
| I.S. EN 13889:2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| I.S. EN 12952-6:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| I.S. EN 505:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| I.S. EN ISO 19902:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| I.S. EN ISO 11608-3:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS (ISO 11608-3:2012) |
| DIN EN 12878:1999-09 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 12899-5:2008-02 | Fixed, vertical road traffic signs - Part 5: Initial type testing |
| DIN EN 197-2:2000-11 | CEMENT - PART 2: CONFORMITY EVALUATION |
| I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| I.S. EN 13263-1:2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| I.S. EN 15079:2015 | COPPER AND COPPER ALLOYS - ANALYSIS BY SOURCE OPTICAL EMISSION SPECTROMETRY (S-OES) |
| I.S. EN ISO 4074:2015 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| I.S. EN 9100:2009 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (BASED ON ISO 9001:2000) AND QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN DESIGN, DEVELOPMENT, PRODUCTION, INSTALLATION AND SERVICING (BASED ON ISO 9001:1994) |
| I.S. EN ISO 14310:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| I.S. EN ISO 11608-2:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES (ISO 11608-2:2012) |
| I.S. EN 12186:2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| I.S. EN 13352:2012 | SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
| I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN 12878:2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN ISO 9241-210:2011-01 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 210: HUMAN-CENTRED DESIGN FOR INTERACTIVE SYSTEMS |
| I.S. EN 1422:2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12159:2012 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| I.S. EN 12952-5:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN ISO 10381-3:2002-08 | Soil quality - Sampling - Part 3: Guidance on safety (ISO 10381-3:2001) |
| DIN EN 12966-3:2005-07 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| I.S. EN 502:2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| I.S. EN 1776:2015 | GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
| I.S. EN 13802:2013 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| I.S. EN ISO 17662:2016 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| EN ISO 12967-1:2011 | Health informatics - Service architecture - Part 1: Enterprise viewpoint (ISO 12967-1:2009) |
| I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| UNI EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| DIN ISO 10381-1:2003-08 | SOIL QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES |
| I.S. EN 487:2009 | ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS |
| I.S. EN 9121:2009 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - ASSESSMENT APPLICABLE TO STOCKIST DISTRIBUTORS |
| DIN EN 14585-1 Beiblatt 1:2006-04 | Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures |
| DIN ISO 19258:2006-05 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| EN ISO 19902:2007/A1:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013) |
| I.S. EN 14359:2017 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| I.S. EN ISO 14698-1:2003 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS |
| I.S. EN 599-1:2009 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS |
| EN ISO 12967-3:2011 | Health informatics - Service architecture - Part 3: Computational viewpoint (ISO 12967-3:2009) |
| I.S. EN 14420-1:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| UNI EN 502 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| UNI EN 12878 : 2014 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| VDE 0674-1 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| VDI/VDE 2617 Blatt 10:2011-01 | Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers |
| VDI/VDE 3699 Blatt 5:2014-09 | Process control using display screens - Alarms/messages |
| VDI 4066 Blatt 4:2016-04 | Hygiene requirements for the production and filling of dairy products without recontamination |
| VDI 2219:2016-09 | Information technology in product development - Introduction and usage of PDM systems |
| VDI 4500 Blatt 4:2011-12 | Technical documentation - Documentation process - Planning, layout, creation |
| VDI 4800 Blatt 1:2016-02 | Resource efficiency - Methodological principles and strategies |
| VDI/VDE 3511 Blatt 4.4:2005-07 | Temperature measurement in industry - Radiation thermometry - Calibration of radiation thermometers |
| KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| VDI/VDE 2862 Blatt 2:2015-02 | Minimum requirements for application of fastening systems and tools - Applications in plant construction, mechanical engineering, equipment manufacturing and for flange connections in components under pressure boundary |
| VDI/VDE 2634 Blatt 2:2012-08 | Optical 3-D measuring systems - Optical systems based on area scanning |
| SAE AS9101G:2022 | Requirements for Conducting Audits of Aviation, Space, and Defense Quality Management Systems |
| SAE AS9163:2022 | Aerospace Series - Certificate of Conformity Requirements |
| VDI/VDE 3682 Blatt 1:2015-05 | Formalised process descriptions - Concept and graphic representation |
| VDI 4510:2006-05 | Engineering services and requirements to engineering service providers |
| VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
| VDI 4060 Blatt 2:2005-06 | Integrated Management Systems - Guidance for practical implementation - Case studies |
| VDI 3986:2014-07 | Determination of efficiencies of conventional power stations |
| VDI/VDE 3517 Blatt 5:2003-05 | Validation of control systems - Validation support by use of control systems |
| VDI/VDE 2862 Blatt 1:2012-04 | Minimum restrictions for application of fastening systems and tools - Applications in the automotive industry |
| VDI 3786 Blatt 1:2013-08 | Environmental meteorology - Meteorological measurements - Fundamentals |
| VDI 4066 Blatt 1:2013-05 | Hygienic requirements for the production and aseptically filling of beverage products - Principles and design criteria |
| VDI 3892:2015-03 | Emission control - Roasted-coffee-producing industry - Plants with a minimum daily output of at least 0,5 tonnes |
| ASME B16.49 : 2017 | FACTORY-MADE, WROUGHT STEEL, BUTTWELDING INDUCTION BENDS FOR TRANSPORTATION AND DISTRIBUTION SYSTEMS |
| VDI 4003:2007-03 | Reliability management |
| BS 6001-9(2011) : 2011 | DOUBLE SAMPLING PLANS BY ATTRIBUTES WITH MINIMAL SAMPLE SIZES, INDEXED BY PRODUCER'S RISK QUALITY (PRQ) AND CONSUMER'S RISK QUALITY (CRQ) |
| VDI 5600 Blatt 1:2016-10 | Manufacturing execution systems (MES) |
| VDI 4084:2017-09 (Draft) | Corrective maintenance and remanufacturing of internal combustion engines - Terminology and processes |
| VDI 5600 Blatt 3:2013-07 | Manufacturing Execution Systems (MES) - Logic interfaces for machine and plant control |
| VDI/VDE 3516 Blatt 1:1978-10 | Process analytical equipment |
| DIN EN 60168 : 2001-12 | TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV |
| VDI 2209:2009-03 | 3D product modelling - Technical and organizational requirements - Procedures, tools, and applications - Cost-effective practical use |
| VDI 2870 Blatt 1:2012-07 | Lean production systems - Basic principles, introduction, and review |
| VDI 4060 Blatt 1:2005-06 | Integrated Management Systems - Guidance for practical implementation - General information |
| VDI/VDE 3699 Blatt 1:2015-04 | Process control using display screens - Terminology |
| VDI 3894 Blatt 1:2011-09 | Emissions and immissions from animal husbandry - Housing systems and emissions - Pigs, cattle, poultry, horses |
| VDI 4256 Blatt 1:2010-10 | Bioaerosols and biological agents - Determination of performance characteristics - Culture-based counting methods |
| UFC 3-535-01 : Change 1 | UNIFIED FACILITIES CRITERIA - VISUAL AIR NAVIGATION FACILITIES |
| VDI 3431:2016-08 | Bending of profiles - Testing notes for profile bending elements |
| VDE 0557-6 : 2001 | LOW-VOLTAGE POWER SUPPLIES, DC OUTPUT - PART 6: REQUIREMENTS FOR LOW-VOLTAGE POWER SUPPLIES OF ASSESSED PERFORMANCE |
| VDI/VDE 2645 Blatt 2:2014-09 | Capability test for fastening technology - Machine capability test - MCT |
| VDI/VDE 3528 Blatt 1:2017-06 | Requirements of commercial grade products and criteria for their use in the instrumentation and control systems important to safety in nuclear power plants - General part |
| VDI/VDE/DGQ/DKD 2622 Blatt 1:2014-06 | Calibration of measuring equipment for electrical quantities - Fundamentals |
| VDI 2083 Blatt 7:2015-10 | Cleanroom technology - Ultrapure media - Quality, supply, distribution |
| UNE-ISO/IEC 20000-2:2015 | Information technology. Service management. Part 2: Guidance on the application of service management systems |
| CEI EN 60966-4 : 2005 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES |
| CEI EN 60903 : 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL IMPIANTI |
| 08/30181362 DC : DRAFT APR 2008 | BS EN 60384-14 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS |
| CAN/CSA-ISO/IEC 30105-4:18 | Information technology — IT Enabled Services- Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 4: Terms and concepts (Adopted ISO/IEC 30105-4:2016, first edition, 2016-11-15) |
| BS ISO 10004:2012 | Quality management. Customer satisfaction. Guidelines for monitoring and measuring |
| BS EN 61513:2013 | Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
| BS EN 3389:2009 | Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730°C. Manufacturing method optional. Technical specification |
| I.S. EN 61751:1999 | LASER MODULES USED FOR TELECOMMUNICATION - RELIABILITY ASSESSMENT |
| BS ISO 15198:2004 | Clinical laboratory medicine. In vitro diagnostic medical devices. Validation of user quality control procedures by the manufacturer |
| 09/30179135 DC : 0 | BS EN 61249-2-42 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROAMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| ISO/IEC TR 20000-11:2015 | Information technology Service management Part 11: Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: ITIL |
| SAE AS 9121 : 2012 | STOCKIST DISTRIBUTORS QUALITY SYSTEM QUESTIONNAIRE ASSOCIATED WITH AS9120 |
| ISO/IEC 19794-1:2011 | Information technology — Biometric data interchange formats — Part 1: Framework |
| 07/30161097 DC : 0 | EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
| I.S. EN 15001-2:2008 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| I.S. EN 61508-4:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS |
| EN IEC 61249-2-45:2018 | Materials for printed boards and other interconnecting structures – Part 2-45: Reinforced base materials clad and unclad – Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
| CSA ISO/IEC 15939:2008 | SYSTEMS AND SOFTWARE ENGINEERING - MEASUREMENT PROCESS |
| DIN EN 13282-3:2015-06 | HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
| BS ISO 35103:2017 | Petroleum and natural gas industries. Arctic operations. Environmental monitoring |
| DIN EN 16751:2016-06 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| DIN ISO 20121:2013-04 | Event sustainability management systems - Requirements with guidance for use (ISO 20121:2012) |
| UNI EN 15213-4 : 2013 | INTELLIGENT TRANSPORT SYSTEMS - AFTER-THEFT SYSTEMS FOR THE RECOVERY OF STOLEN VEHICLES - PART 4: INTERFACE AND SYSTEM REQUIREMENTS IN TERMS OF LONG RANGE COMMUNICATION SYSTEM |
| AQAP 100 : 3 | POLICY ON AN INTEGRATED SYSTEMS APPROACH TO QUALITY THROUGH THE LIFE CYCLE |
| BS ISO 23611-6 : 2012 | SOIL QUALITY - SAMPLING OF SOIL INVERTEBRATES - PART 6: GUIDANCE FOR THE DESIGN OF SAMPLING PROGRAMMES WITH SOIL INVERTEBRATES |
| UTEC 80 810 : 2005 | RELIABILITY DATA HANDBOOK - UNIVERSAL MODEL FOR RELIABILITY PREDICTION OF ELECTRONICS COMPONENTS, PCBS AND EQUIPMENT |
| 10/30227686 DC : 0 | BS EN 13352 - SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
| I.S. EN ISO/IEC 17021-1:2015 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 1: REQUIREMENTS (ISO/IEC 17021-1:2015) |
| 17/30351251 DC : 0 | BS EN 62959 - ENVIRONMENTAL CONSCIOUS DESIGN (ECD) - PRINCIPLES, REQUIREMENTS AND GUIDANCE |
| PD ISO/TS 18667:2018 | Space systems. Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management |
| 11/30203261 DC : 0 | BS ISO 20252 - MARKET, OPINION AND SOCIAL RESEARCH - VOCABULARY AND SERVICE REQUIREMENTS |
| BS ISO 12877:2011 | Traceability of finfish products. Specification on the information to be recorded in farmed finfish distribution chains |
| 17/30331313 DC : 0 | BS EN ISO 20186-2 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR VENOUS WHOLE BLOOD - PART 2: ISOLATED GENOMIC DNA CORRECT |
| 08/30135847 DC : DRAFT AUG 2008 | BS ISO 9004 - MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| DIN EN 1337-8:2008-01 | STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
| 17/30364387 DC : 0 | BS EN 50069 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
| IEEE 1725-2011 | IEEE Standard for Rechargeable Batteries for Cellular Telephones |
| EN ISO 15378:2017 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017) |
| 12/30259337 DC : 0 | BS ISO/IEC 15940 - SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE ENGINEERING ENVIRONMENT SERVICES |
| BS IEC 60079-19:1993 | Electrical apparatus for explosive gas atmospheres Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives) |
| CEI EN 60895 : 2005 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV AC AND (+/-) 600 KV DC |
| PREN 12842 : DRAFT 2010 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13670:2011-03 | Execution of concrete structures |
| CEI EN 61508-4 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY RELATEDSYSTEMS - PART 4: DEFINITIONS AND ABBREVIATIONS |
| BS EN 50128:2011 | Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems |
| BS EN 61249-2-35:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| I.S. EN 450-2:2005 | FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| AQAP 2070 : 2015 | NATO MUTUAL GOVERNMENT QUALITY ASSURANCE (GQA) |
| 17/30348152 DC : 0 | BS EN ISO 22300 - SECURITY AND RESILIENCE - TERMINOLOGY |
| 11/30237789 DC : 0 | BS ISO 22514-2 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 2: PROCESS CAPABILITY AND PERFORMANCE OF TIME-DEPENDENT PROCESS MODELS |
| 16/30281533 DC : 0 | BS ISO 18676 - SPACE SYSTEMS - GUIDELINES FOR THE MANAGEMENT OF SYSTEMS ENGINEERING PROCESSES |
| BS ISO 15859-6:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Monomethylhydrazine propellant |
| BS EN 3388:2009 | Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification 1275 MPa/650°C. Manufacturing method optional. Technical specification |
| ISO/TS 8000-110:2008 | Data quality Part 110: Master data: Exchange of characteristic data: Syntax, semantic encoding, and conformance to data specification |
| BS ISO 2789:2013 | Information and documentation. International library statistics |
| PD ISO/IEC TR 20000-12:2016 | Information technology. Service management Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: CMMI-SVC® |
| 10/30231948 DC : 0 | BS EN ISO 12967-3 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 3: COMPUTATIONAL VIEWPOINT |
| BS EN 61249-4-19:2013 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| BS EN 17007:2017 | Maintenance process and associated indicators |
| BS EN ISO 9004:2018 | Quality management. Quality of an organization. Guidance to achieve sustained success |
| 13/30279205 DC : 0 | BS EN 9101 - QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANISATIONS |
| BS ISO/IEC 29109-1:2009 | Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Generalized conformance testing methodology |
| BS ISO 15859-2:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Hydrogen |
| BS ISO 18788:2015 | Management system for private security operations. Requirements with guidance for use |
| BS ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Elements of SPC |
| BS EN 15358:2011 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| ANSI/AAMI/IEC 80001-1:2010 | APPLICATION OF RISK MANAGEMENT FOR IT NETWORKS INCORPORATING MEDICAL DEVICES - PART 1: ROLES, RESPONSIBILITIES AND ACTIVITIES |
| BS EN 13670:2009 | Execution of concrete structures |
| 04/647665 DC : DRAFT JAN 2004 | ISO/IEC 25000 - SOFTWARE ENGINEERING - SOFTWARE PRODUCT QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - GUIDE TO SQUARE |
| ISO 22320:2011 | Societal security Emergency management Requirements for incident response |
| BS ISO 15859-4:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Helium |
| BS ISO 12875:2011 | Traceability of finfish products. Specification on the information to be recorded in captured finfish distribution chains |
| I.S. EN 12966-3:2005 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 3: FACTORY PRODUCTION CONTROL |
| 14/30304489 DC : 0 | BS EN 9277 - AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDE FOR THE MANAGEMENT OF SYSTEM ENGINEERING |
| MIL-T-10646 Revision D:1988 | Telescope, Straight: M90 Series, M90A2 and M90A3 |
| DD ISO/TS 15530-4:2008 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation |
| 01/402473 DC : DRAFT JUNE 2001 | DRAFT BS EN ISO 19011 GUIDELINES FOR QUALITY AND/OR ENVIRONMENTAL MANAGEMENT SYSTEMS AUDITING |
| BS EN ISO 25378:2011 | Geometrical product specifications (GPS). Characteristics and conditions. Definitions |
| 13/30234870 DC : 0 | BS ISO 11620 - INFORMATION AND DOCUMENTATION - LIBRARY PERFORMANCE INDICATORS |
| BS EN 61249-2-38:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| CEI EN 60896-22 : 2005 | STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
| CEI EN 61160 : 2006 | DESIGN REVIEW |
| 11/30215034 DC : DRAFT MAR 2011 | BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| IEC TS 63049:2017 | Terrestrial photovoltaic (PV) systems - Guidelines for effective quality assurance in PV systems installation, operation and maintenance |
| BS EN 61249-2-19:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad |
| PD IEC/TR 62726:2014 | Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems |
| CEI EN 60896-21 : 2005 | STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
| BS CECC 00806:1997 | Harmonized system of quality assessment for electronic components. Guide to total quality management (TQM) for CECC approved organizations |
| PD CEN/TS 15472:2016 | Postal services. Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing |
| 11/30238893 DC : 0 | BS ISO 16204 - DURABILITY - SERVICE LIFE DESIGN OF CONCRETE STRUCTURES |
| OHSAS 18001:2007 | Occupational health and safety management systems. Requirements |
| UNE-EN ISO 11240:2013 | Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of units of measurement (ISO 11240:2012) |
| UNE-EN ISO 17034:2017 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| BS ISO 20400:2017 | Sustainable procurement. Guidance |
| BS EN ISO 17078-4:2010 | Petroleum and natural gas industries. Drilling and production equipment Practices for side-pocket mandrels and related equipment CD-ROM |
| S.R. CEN ISO/TS 17969:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - GUIDELINES ON COMPETENCY MANAGEMENT FOR WELL OPERATIONS PERSONNEL (ISO/TS 17969:2017) |
| DIN EN 16679:2015-03 | PACKAGING - TAMPER VERIFICATION FEATURES FOR MEDICINAL PRODUCT PACKAGING |
| 15/30317874 DC : 0 | BS EN 16844 - AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| BS EN 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| DIN EN 15357:2011-05 | Solid recovered fuels - Terminology, definitions and descriptions |
| DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 | ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015) |
| DIN SPEC 1330 : 2013 | INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012) |
| 17/30355212 DC : 0 | BS ISO 10794 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - MATERIAL, MECHANICAL PARTS AND PROCESSES |
| IEC 61249-2-32:2009 | Materials for printed boards and other interconnecting structures - Part 2-32: Reinforced base materials, clad and unclad - Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad |
| 16/30272856 DC : 0 | BS ISO/IEC 40180 - INFORMATION TECHNOLOGY - LEARNING, EDUCATION, AND TRAINING - QUALITY FOR LEARNING, EDUCATION AND TRAINING - FUNDAMENTALS AND REFERENCE FRAMEWORK |
| UNI ISO 29990 : 2011 | LEARNING SERVICES FOR NON-FORMAL EDUCATION AND TRAINING - BASIC REQUIREMENTS FOR SERVICE PROVIDERS |
| CEI EN 62429 : 2008 | RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS |
| PD CEN/TS 16919:2016 | Postal services. Interface and data transfer format for capturing postal automation events IDT-PAE |
| 10/30209804 DC : 0 | BS ISO 7870-4 - CONTROL CHARTS - PART 4: CUMULATIVE SUM CHARTS |
| BS EN 80001-1:2011 | Application of risk management for IT-networks incorporating medical devices Roles, responsibilities and activities |
| BS EN ISO 19901-6:2009 | Petroleum and natural gas industries. Specific requirements for offshore structures Marine operations |
| BS ISO 25841:2017 | Female condoms. Requirements and test methods |
| UNI ISO 13053-1 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 1: DMAIC METHODOLOGY |
| BS ISO 14300-1:2011 | Space systems. Programme management Structuring of a project |
| AQAP 160 : 1 | NATO INTEGRATED QUALITY REQUIREMENTS FOR SOFTWARE THROUGHOUT THE LIFE CYCLE |
| IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
| 06/30146760 DC : DRAFT FEB 2006 | EN 12967-2 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 2: INFORMATION VIEWPOINT |
| BS EN 16001:2009 | Energy management systems. Requirements with guidance for use |
| 10/30234446 DC : 0 | BS ISO 16363 - SPACE DATA AND INFORMATION TRANSFER SYSTEMS - AUDIT AND CERTIFICATION OF TRUSTWORTHY DIGITAL REPOSITORIES |
| BS EN 82304-1:2017 | Health Software General requirements for product safety |
| 16/30335535 DC : 0 | BS ISO 12308 - PLAIN BEARINGS - QUALITY ASSURANCE - SAMPLE TYPES - DEFINITIONS, APPLICATIONS AND TESTING |
| I.S. CEN ISO TR 14969:2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485: 2003 |
| 16/30349524 DC : 0 | BS EN ISO 17427-1 - INTELLIGENT TRANSPORT SYSTEMS - COOPERATIVE ITS - PART 1: ROLES AND RESPONSIBILITIES IN THE CONTEXT OF CO-OPERATIVE ITS ARCHITECTURE(S) |
| 15/30330354 DC : 0 | BS ISO 20683-1 - AIRCRAFT GROUND EQUIPMENT - DESIGN, TEST AND MAINTENANCE FOR TOWBARLESS TOWING VEHICLES (TLTV) INTERFACED WITH NOSE-LANDING GEAR - PART 1: MAIN-LINE AIRCRAFT |
| BS EN ISO/IEC 17000:2004 | Conformity assessment. Vocabulary and general principles |
| BS ISO/IEC 27043 : 2015 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INCIDENT INVESTIGATION PRINCIPLES AND PROCESSES |
| S.R. OHSAS 18002:2008 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| 14/30298663 DC : 0 | BS ISO 30302 - INFORMATION AND DOCUMENTATION - MANAGEMENT SYSTEMS FOR RECORDS - GUIDELINES FOR IMPLEMENTATION |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| 08/30174708 DC : DRAFT MAR 2008 | BS ISO 30000 - SHIPS AND MARINE TECHNOLOGY - SHIP RECYCLING MANAGEMENT SYSTEMS - SPECIFICATIONS FOR MANAGEMENT SYSTEMS FOR SAFE AND ENVIRONMENTALLY SOUND SHIP RECYCLING FACILITIES |
| BS ISO 22514-2:2017 | Statistical methods in process management. Capability and performance Process capability and performance of time-dependent process models |
| IEEE 1220-2005 | IEEE Standard for Application and Management of the Systems Engineering Process |
| PD CEN/TR 15809:2008 | Characterization of sludges. Hygienic aspects. Treatments |
| BS EN ISO 14006:2011 | Environmental management systems. Guidelines for incorporating ecodesign |
| PD ISO IWA 18:2016 | Framework for integrated community-based life-long health and care services in aged societies |
| 11/30249097 DC : 0 | BS EN 60947-1:2007+A2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| UNE-ISO/TS 22003:2015 | Food safety management systems -- Requirements for bodies providing audit and certification of food safety management systems |
| I.S. EN ISO 10012:2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| 07/30161754 DC : 0 | BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
| PD ISO/IEC TR 24748-1:2010 | Systems and software engineering. Life cycle management Guide for life cycle management |
| ASTM E 2077 : 2000 : R2016 | Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
| UNE-EN 16214-1:2013 | Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology |
| BS ISO 17367:2013 | Supply chain applications of RFID. Product tagging |
| DIN CEN/TS 15472;DIN SPEC 16590:2016-08 | POSTAL SERVICES - METHOD FOR MEASUREMENT OF PARCEL TRANSIT TIME FOR CROSS-BORDER PARCELS WITHIN THE EUROPEAN UNION AND EFTA USING TRACKING AND TRACING |
| BS EN 61511-2:2017 | Functional safety. Safety instrumented systems for the process industry sector Guidelines for the application of IEC 61511-1 |
| BS EN 50657:2017 | Railways Applications. Rolling stock applications. Software on Board Rolling Stock |
| I.S. EN 1474-2:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| DIN EN ISO 11607-1:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006 + AMD 1.:2014) |
| BS EN ISO 9241-420:2011 | Ergonomics of human-system interaction Selection of physical input devices |
| BS ISO 37100:2016 | Sustainable cities and communities. Vocabulary |
| BS EN 61249-4-1:2008 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Epoxide woven E-glass prepreg of defined flammability |
| EN 62282-4-102:2017 | Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods |
| 07/30164961 DC : 0 | BS EN 61249-4-15 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-15: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| UNE-ISO/TS 9002:2017 | Quality management systems -- Guidelines for the application of ISO 9001:2015 |
| 16/30348679 DC : 0 | BS ISO 6707-1 - BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY - PART 1: GENERAL TERMS |
| 09/30194526 DC : 2009 | BS EN 15331 - CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| ISO 30000:2009 | Ships and marine technology — Ship recycling management systems — Specifications for management systems for safe and environmentally sound ship recycling facilities |
| SAE AS 9145 : 2016 | AEROSPACE SERIES - REQUIREMENTS FOR ADVANCED PRODUCT QUALITY PLANNING AND PRODUCTION PART APPROVAL PROCESS |
| 17/30319534 DC : 0 | BS ISO 13019 - TISSUE-ENGINEERED MEDICAL PRODUCTS - QUANTIFICATION OF SULPHATED GLYCOSAMINOGLYCANS (SGAG) FOR EVALUATION OF CHONDROGENESIS |
| NF EN 60895 : 2004 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C. |
| BS EN 60469:2013 | Transitions, pulses and related waveforms. Terms, definitions and algorithms |
| 16/30314766 DC : 0 | BS EN 62282-3-201 ED2.0 - FUEL CELL TECHNOLOGIES - PART 3-201: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS FOR SMALL FUEL CELL POWER SYSTEMS |
| UNI EN ISO 19901-6 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS |
| BS EN 16310:2013 | Engineering services. Terminology to describe engineering services for buildings, infrastructure and industrial facilities |
| UNI ISO 20252 : 2012 | MARKET, OPINION AND SOCIAL RESEARCH - VOCABULARY AND SERVICE REQUIREMENTS |
| PREN 50069 : DRAFT 2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS |
| DIN EN 16603-10-06 E : 2014 | SPACE ENGINEERING - PART 10-06: TECHNICAL REQUIREMENTS SPECIFICATION |
| 07/30135834 DC : 0 | ISO 9001 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| AQAP 2131 : 2017 | NATO QUALITY ASSURANCE REQUIREMENTS FOR FINAL INSPECTION AND TEST |
| NFPA 1984 : 2016 | RESPIRATORS FOR WILDLAND FIRE-FIGHTING OPERATIONS |
| 15/30327592 DC : 0 | BS EN 9145 - AEROSPACE SERIES - REQUIREMENTS FOR ADVANCED PRODUCT QUALITY PLANNING AND PRODUCTION - PART APPROVAL PROCESS |
| UNI EN ISO 22300 : 2014 | SOCIETAL SECURITY - TERMINOLOGY |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| I.S. EN 61243-2:1999 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| I.S. EN 62309:2004 | DEPENDABILITY OF PRODUCTS CONTAINING REUSED PARTS - REQUIREMENTS FOR FUNCTIONALITY AND TESTS |
| GR 137 CORE : ISSUE 2 | GENERIC REQUIREMENTS FOR TWISTED-PAIR METALLIC CABLE PRODUCTS USED IN TELECOMMUNICATIONS FACILITIES |
| BS ISO 8178-1:2017 | Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement systems of gaseous and particulate emissions |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| BS ISO 14065 : 2007 | GREENHOUSE GASES - REQUIREMENTS FOR GREENHOUSE GAS VALIDATION AND VERIFICATION BODIES FOR USE IN ACCREDITATION OR OTHER FORMS OF RECOGNITION |
| ISO 19011:2011 | Guidelines for auditing management systems |
| 08/30192173 DC : 0 | BS EN 62542 ED1 - ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - STANDARDIZATION OF ENVIRONMENTAL ASPECTS - GLOSSARY OF TERMS |
| PD CEN ISO/TS 17427:2014 | Intelligent transport systems. Cooperative systems. Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems |
| BS ISO 22514-6:2013 | Statistical methods in process management. Capability and performance Process capability statistics for characteristics following a multivariate normal distribution |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS EN ISO 19901-8:2015 | Petroleum and natural gas industries. Specific requirements for offshore structures Marine soil investigations |
| BS EN ISO/IEC 17021:2011 | Conformity assessment. Requirements for bodies providing audit and certification of management systems |
| DD CEN ISO/TS 11133-1:2009 | Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media General guidelines on quality assurance for the preparation of culture media in the laboratory |
| UNI CEI EN ISO/IEC 17065 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES |
| PD ISO/TS 11356:2011 | Crop protection equipment. Traceability. Spray parameter recording |
| 03/305825 DC : DRAFT APR 2003 | ISO 21368 - ADHESIVES - GUIDELINES FOR THE FABRICATION OF ADHESIVELY BONDED STRUCTURES AND FOR REPORTING PROCEDURES SUITABLE FOR THE RISK EVALUATION OF SUCH STRUCTURES |
| PD ISO/TR 22514-4:2007 | Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
| 17/30316205 DC : 0 | BS IEC 62853 ED1.0 - OPEN SYSTEMS DEPENDABILITY |
| 10/30201346 DC : 0 | BS ISO 22514-6 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 6: PROCESS CAPABILITY STATISTICS FOR CHARACTERISTICS FOLLOWING A MULTIVARIATE NORMAL DISTRIBUTION |
| AAMI ISO 10993-1:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO/IEC/IEEE 26513:2017 | Systems and software engineering. Requirements for testers and reviewers of information for users |
| 15/30330357 DC : 0 | BS ISO 20683-2 - AIRCRAFT GROUND EQUIPMENT - DESIGN, TEST AND MAINTENANCE FOR TOWBARLESS TOWING VEHICLES (TLTV) INTERFACED WITH NOSE-LANDING GEAR - PART 2: REGIONAL AIRCRAFT |
| 15/30329382 DC : 0 | BS EN 9120 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS |
| ISO/IEC Guide 14:2018 | Products and related services — Information for consumers |
| 05/30133283 DC : DRAFT MAY 2005 | IEC 61190-1-2 ED 2 - ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-2: REQUIREMENTS FOR SOLDERING PASTE FOR HIGH-QUALITY INTERCONNECTS IN ELECTRONICS ASSEMBLY |
| CEI UNI EN ISO/IEC 17020 : 2012 | CONFORMITY ASSESSMENT REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
| BS ISO 14621-2:2003 | Space systems. Electrical, electronic and electromechanical (EEE) parts Control programme requirements |
| 15/30324719 DC : 0 | BS ISO 30400 - HUMAN RESOURCE MANAGEMENT - TERMINOLOGY |
| BS ISO 15388:2012 | Space systems. Contamination and cleanliness control |
| 17/30351720 DC : 0 | BS EN ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| I.S. EN 16265:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
| 15/30274539 DC : 0 | BS ISO 18480-2 - FACILITIES MANAGEMENT - PART 2: GUIDANCE ON STRATEGIC SOURCING AND THE DEVELOPMENT OF AGREEMENTS |
| UNI ISO 22514-6 : 2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 6: PROCESS CAPABILITY STATISTICS FOR CHARACTERISTICS FOLLOWING A MULTIVARIATE NORMAL DISTRIBUTION |
| BS ISO 22514-4:2016 | Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
| 15/30330450 DC : 0 | BS EN 9138 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| 17/30345251 DC : 0 | BS ISO 10144 - STEELS FOR THE REINFORCEMENT AND PRESTRESSING OF CONRETE - CERTIFICATION SCHEME FOR STEEL BARS AND WIRES |
| BS ISO 18436-3:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Requirements for training bodies and the training process |
| BS EN 16887:2017 | Leather. Environmental footprint. Product Category Rules (PCR). Carbon footprints |
| 09/30192867 DC : 0 | BS ISO 9241-420 - ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 420: SELECTION PROCEDURES FOR PHYSICAL INPUT DEVICES |
| 13/30280815 DC : 0 | BS EN 62343-2 - DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION |
| BS PD ISO/TR 14969 : 2004 AMD 15958 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| UNI EN 16256-1 : 2012 | PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 1: TERMINOLOGY |
| EG 202 290 : 1.1.1 FINAL DRAFT | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); MEASUREMENT UNCERTAINTIES AND TEST METHODOLOGIES FROM 1 GHZ TO 40 GHZ |
| 12/30251858 DC : 0 | BS ISO 4074 - NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS |
| 12/30250634 DC : 0 | BS EN 13802 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| IEC TR 62572-2:2008 | Fibre optic active components and devices - Reliability standards - Part 2: Laser module degradation |
| 13/30286032 DC : 0 | BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS |
| DIN ISO 13065:2017-06 | SUSTAINABILITY CRITERIA FOR BIOENERGY (ISO 13065:2015) |
| BS ISO 37500:2014 | Guidance on outsourcing |
| BS EN ISO 10407-2:2008 | Petroleum and natural gas industries. Rotary drilling equipment Inspection and classification of used drill stem elements |
| DIN EN ISO/IEC 80079-34:2012-03 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011) |
| 14/30263100 DC : 0 | BS EN ISO 17989-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES |
| PD ISO/TS 12911:2012 | Framework for building information modelling (BIM) guidance |
| DIN EN ISO 17100:2016-05 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES (ISO 17100:2015/AMD.1:2017) |
| 97/703020 DC : 0 | ISO/DIS 3999 - APPARATUS FOR INDUSTRIAL GAMMA RADIOGRAPHY - DESIGN AND TEST CRITERIA |
| BS EN 60300-2:2004 | Dependability management Guidelines for dependability management |
| BS EN ISO 9002:1994 | Quality systems. Model for quality assurance in production, installation and servicing |
| BS EN 16263-1:2015 | Pyrotechnic articles. Other pyrotechnic articles Terminology |
| I.S. EN 16431:2014 | RAILWAY APPLICATIONS - TRACK - HOLLOW SLEEPERS AND BEARERS |
| UNE-EN 62304:2007 | Medical device software - Software life-cycle processes (IEC 62304:2006) |
| 04/19983403 DC : DRAFT FEB 2004 | BS 6001-3 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 3: SKIP LOT SAMPLING PROCEDURES |
| 06/30150257 DC : 0 | EN 9104-2 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATIONS PROGRAMS |
| I.S. CEN TS 12666-2:2006 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| 04/30109881 DC : DRAFT MAR 2004 | EN 9104 - REQUIREMENTS FOR AEROSPACE SUPPLIER QUALITY SYSTEM CERTIFICATION REGISTRATION SCHEMES FOR USE BY THE IAQG SECTORS |
| BS ISO 23409:2011 | Male condoms. Requirements and test methods for condoms made from synthetic materials |
| 12/30243045 DC : 0 | BS EN 62065 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - TRACK CONTROL SYSTEMS - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| 12/30273046 DC : 0 | BS EN 15628 - MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| 07/30164965 DC : 0 | BS EN 61249-4-16 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-16: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| BS EN 60966-3:2009 | Radio frequency and coaxial cable assemblies Sectional specification for semi-flexible coaxial cable assemblies |
| 13/30248599 DC : 0 | BS ISO 17258 - STATISTICAL METHODS - SIX SIGMA - BENCHMARKING FOR SIX SIGMA |
| UNE-EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
| 10/30235541 DC : 0 | BS EN 61249-4-19 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPEG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| BS EN 62366 : 2008 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| BS ISO/IEC 29110-3-2:2018 | Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs) Conformity certification scheme |
| 14/30231508 DC : 0 | BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY |
| 14/30298856 DC : 0 | BS EN 9133 - AEROSPACE SERIES - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| PD CEN/TR 15592:2007 | Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement |
| 13/30284118 DC : 0 | BS EN 61249-2-44 ED.1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-44: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| ISO 55001:2014 | Asset management Management systems Requirements |
| 04/30116688 DC : DRAFT JUL 2004 | EN 9135 - AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS |
| 06/30150260 DC : 0 | EN 9104-3 - REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) - PART 3: AUDITOR TRAINING AND QUALIFICATION |
| 04/100443 DC : DRAFT JAN 2004 | |
| BS EN ISO 11608-5:2012 | Needle-based injection systems for medical use. Requirements and test methods Automated functions |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| BS PD ISO/TS 14067 : 2013 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
| 02/106355 DC : DRAFT OCT 2002 | EN 12966-3 - VERTICAL ROAD - TRAFFIC SIGNS - PART 3: VARIABLE MESSAGE SIGNS - FACTORY PRODUCTION CONTROL |
| BS EN 1337-8:2007 | Structural bearings Guide bearings and restraint bearings |
| DIN EN ISO 13408-5:2011-09 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
| BS EN ISO 14025:2010 | Environmental labels and declarations. Type III environmental declarations. Principles and procedures |
| BS EN 1474-3:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Offshore transfer systems |
| 11/30247588 DC : DRAFT JULY 2011 | BS EN 16310 - ENGINEERING CONSULTANCY SERVICES - TERMINOLOGY AT A HIGH LEVEL TO DESCRIBE THE ENGINEERING SERVICES IN CONSTRUCTION OF BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES |
| UNE-EN ISO 13408-4:2011 | Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005) |
| BS EN 62508:2010 | Guidance on human aspects of dependability |
| FM 5580 : 2012 | HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
| DIN EN ISO 16559:2014-12 | Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014) |
| PD CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity |
| UNE-EN 15358:2011 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| 16/30337260 DC : 0 | BS ISO 6707-2 - BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY PART 2: COMMUNICATION AND CONTRACT TERMS |
| 17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PD ISO/TS 16949:2009 | Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| DD CEN/TS 15674:2007 | Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods |
| 01/707284 DC : DRAFT APR 2001 | IAQS 9100:2001 - AEROSPACE - QUALITY MANAGEMENT SYSTEMS |
| BS ISO 16730-1:2015 | Fire safety engineering. Procedures and requirements for verification and validation of calculation methods General |
| IEC TR 62540:2009 | Radio frequency identification (RFID) for stationary lead acid cells and monoblocs - Tentative requirements |
| 15/30294923 DC : 0 | BS EN 61291-5-2 ED2.0 - OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS |
| 12/30271063 DC : 0 | PD ISO/IEC/TS 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| 03/105598 DC : DRAFT MAY 2003 | BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
| BS EN ISO 17824:2014 | Petroleum and natural gas industries. Downhole equipment. Sand screens |
| DD CEN/TS 14773:2004 | Postal services. Quality of service. Measurement of loss and substantial delay of priority and first class single piece mail using a survey of test letters |
| 13/30279826 DC : 0 | BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| BS EN 1474-2:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer hoses |
| BS EN 61069-8:2016 | Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of other system properties |
| I.S. EN 3388:2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| 17/30316733 DC : 0 | BS ISO 16696-1 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - PART 1: COMPONENT PERFORMANCE AND PRODUCTION REQUIREMENTS |
| BS EN 15221-5:2011 | Facility management Guidance on facility management processes |
| BS EN 62282-3-201:2017 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods for small fuel cell power systems |
| UNE 188001:2011 | Golf courses. Services requirements. |
| PD ISO/TR 80002-2:2017 | Medical device software Validation of software for medical device quality systems |
| 13/30255474 DC : 0 | BS ISO 7504 - GAS ANALYSIS - VOCABULARY |
| PD CLC/TR 50674:2018 | Guidelines for the verification of household appliances under energy labelling and eco design |
| UNE-EN ISO 16904:2016 | Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016) |
| AAMI ISO TIR 14969 : 2004 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| BS EN ISO 13408-5:2011 | Aseptic processing of health care products Sterilization in place |
| UNE-EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
| 11/30247969 DC : 0 | ISO/DIS 22514-6.2 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 6: PROCESS CAPABILITY STATISTICS FOR CHARACTERISTICS FOLLOWING A MULTIVARIATE NORMAL DISTRIBUTION |
| 10/30197293 DC : 0 | BS ISO 14300-2 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - PART 2: PRODUCT ASSURANCE |
| I.S. ISO 10005:2005 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| 06/30147326 DC : DRAFT MAR 2006 | EN 9104 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATIONS PROGRAMS |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| BS ISO 22837:2009 | Vehicle probe data for wide area communications |
| PD CEN ISO/TS 14067:2014 | Greenhouse gases. Carbon footprint of products. Requirements and guidelines for quantification and communication |
| 02/400715 DC : DRAFT SEP 2002 | BS IEC 60300-2 - DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY MANAGEMENT |
| 01/562720 DC : DRAFT JULY 2001 | ISO/CD 13485 QUALITY MANAGEMENT SYSTEMS - MEDICAL DEVICES - SYSTEM REQUIREMENTS FOR REGULATORY PURPOSES |
| UNE-EN 16372:2015 | Aesthetic surgery services |
| ISO 20815:2008 | Petroleum, petrochemical and natural gas industries Production assurance and reliability management |
| PD ISO/IEC TR 90005:2008 | Systems engineering. Guidelines for the application of ISO 9001 to system life cycle processes |
| 03/301732 DC : DRAFT JAN 2003 | EN 9121 - AEROSPACE SERIES - QUALITY SYSTEMS - QUALITY SYSTEM ASSESSMENT APPLICABLE TO STOCKIST DISTRIBUTORS |
| BS EN 60936-2:1999 | Maritime navigation and radiocommunication equipment and systems. Radar Shipborne radar for high speed craft (HSC). Methods of testing and required test results |
| BS EN 45510-4-4:2002 | Guide for the procurement of power station equipment. Boiler auxiliaries Fuel preparation equipment |
| DD ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Certification and accreditation requirements |
| UNI EN 15331 : 2011 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| 17/30359429 DC : 0 | BS ISO 10004 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| CSA ISO 5833 : 0 | IMPLANTS FOR SURGERY - ACRYLIC RESIN CEMENTS |
| CLC/TS 61111:2006 | Matting of insulating material for electrical purposes |
| API 7G-2 : 2009 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| ISO 6707-2:2017 | Buildings and civil engineering works — Vocabulary — Part 2: Contract and communication terms |
| BS ISO 21350:2007 | Space systems. Off-the-shelf item utilization |
| UNI EN 16323 : 2014 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| CSA ISO TR 10013 : 2001 : R2016 | GUIDELINES FOR QUALITY MANAGEMENT SYSTEM DOCUMENTATION |
| CSA ISO 14040 : 2006 : R2011 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
| AAMI IEC 62366 : 2015 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| BS EN 61811-54:2002 | Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 15 mm x 7,5 mm base |
| PD ISO/TR 15686-11:2014 | Buildings and constructed assets. Service life planning Terminology |
| 16/30326643 DC : 0 | BS EN ISO 20166-1 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR FORMALIN-FIXED AND PARAFFIN-EMBEDDED (FFPE) TISSUE - PART 1: ISOLATED RNA |
| BS ISO 16355-1:2015 | Application of statistical and related methods to new technology and product development process General principles and perspectives of Quality Function Deployment (QFD) |
| BS ISO 15859-7:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Hydrazine propellant |
| BS EN 125000:1998 | Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials |
| SAE AMS 3961 : 2015 | 350 DEGREES F AUTOCLAVE CURE, LOW FLOW TOUGHENED EPOXY PREPREGS |
| CSA IEC 62366 : 2014 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| BS ISO/IEC 19794-1 : 2011 | INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS - PART 1: FRAMEWORK |
| 14/30281836 DC : 0 | BS ISO 8000-8 - DATA QUALITY - PART 8: INFORMATION AND DATA QUALITY: CONCEPTS AND MEASURING |
| BS ISO 14620-2:2011 | Space systems. Safety requirements Launch site operations |
| 10/30207674 DC : DRAFT JUNE 2010 | BS ISO 14300-1 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - PART 1: STRUCTURING OF A PROJECT |
| BS EN 61193-3:2013 | Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| I.S. ISO 10011-1:1991 | GUIDELINES FOR AUDITING QUALITY SYSTEMS - PART 1: AUDITING |
| 04/19979705 DC : DRAFT SEP 2004 | BS EN ISO 11064-7 - ERGONOMIC DESIGN OF CONTROL CENTRES - PART 7: PRINCIPLES FOR THE EVALUATION OF CONTROL CENTRES |
| 02/706744 DC : DRAFT MAY 2002 | ISO/DIS 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
| UNI ISO/TS 14067 : 2013 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
| XP PREN 9120 : 2004 XP | AEROSPACE SERIES - QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE APPLICABLE TO STOCKIST DISTRIBUTORS |
| 07/30164110 DC : 0 | BS EN 9131 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - NONCONFORMANCE DOCUMENTATION |
| BS EN 60383-1:1998 | Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria |
| 04/19985213 DC : DRAFT NOV 2004 | ISO 19902 - PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| BS EN 60966-4:2003 | Radio frequency and coaxial cable assemblies Sectional specification for semi-rigid coaxial cable assemblies |
| CAN/CSA-ISO/IEC 15944-9:16 | Information technology Business Operational View Part 9: Business transaction traceability framework for commitment exchange (Adopted ISO/IEC 15944-9:2015, first edition, 2015-10-01) |
| BS ISO/IEC 19796-3:2009 | Information technology. Learning, education and training. Quality management, assurances and metrics Reference methods and metrics |
| BS EN 60601-1-10 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| CSA ISO TS 14048 :2003 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - DATA DOCUMENTATION FORMAT |
| 03/307737 DC : DRAFT JUNE 2003 | ISO/IEC 17050-1 - CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| PD CR 14269:2001 | Chemicals used for treatment of water intended for human consumption. Guidelines for the purchase of products |
| I.S. EN 60469:2013 | TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS (IEC 60469:2013 (EQV)) |
| UNE-EN ISO 13408-3:2011 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| 04/30115151 DC : DRAFT JUNE 2004 | ISO/IEC 16085 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| UNE-EN 9116:2016 | Aerospace series - Notice of Change (NOC) Requirements |
| 14/30257644 DC : 0 | BS EN ISO 13485 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES |
| CSA ISO/IEC 26514 : 2013 | SYSTEMS AND SOFTWARE ENGINEERING - REQUIREMENTS FOR DESIGNERS AND DEVELOPERS OF USER DOCUMENTATION |
| 08/30160045 DC : DRAFT APR 2008 | BS ISO 22006 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2000 IN CROP PRODUCTION |
| IEEE DRAFT 15288 : 0 | SOFTWARE AND SYSTEMS ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| UNE-ISO 20400:2017 | Sustainable procurement. Guidance |
| SAE ARP 6178 : 2011 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS - TOOL FOR RISK ASSESSMENT OF DISTRIBUTORS |
| CSA ISO/IEC 20000-2 : 2013 : R2017 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: GUIDANCE ON THE APPLICATION OF SERVICE MANAGEMENT SYSTEMS |
| 07/30090385 DC : 0 | ISO 13408-1 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| NF ISO 16412 : 2006 | AIR CARGO EQUIPMENT - AIR CARGO PALLETS - UTILIZATION GUIDELINES |
| CSA ISO/IEC 27031 : 2013 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES FOR INFORMATION AND COMMUNICATION TECHNOLOGY READINESS FOR BUSINESS CONTINUITY |
| CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 10014 : 2006 : INC : COR 1 : 2016 : R201100 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
| CSA B480 : 2002 : R2013 | CUSTOMER SERVICE STANDARD FOR PEOPLE WITH DISABILITIES |
| DIN EN 16001 E : 2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| CSA C50069 : 1999 : INC : UPD 1 : 1999 : R2012 | WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| DIN EN 15221-5:2011-12 | Facility Management - Part 5: Guidance on Facility Management processes |
| NF EN 61249-2-36 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-36: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| ISO/IEC/IEEE 12207:2017 | Systems and software engineering — Software life cycle processes |
| PREN 9104-002 : 200P2 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| API 19G4 : 2011 | PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| PREN 9138 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| CSA ISO 14044 : 2006 : R2016 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
| EN ISO/TS 15876-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| PREN 9102 : 200P3 | AEROSPACE SERIES - QUALITY SYSTEMS - FIRST ARTICLE INSPECTION REQUIREMENT |
| DIN EN 1474-3:2009-02 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| CSA ISO/IEC 16085 : 2007 : R2017 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| IEC 61249-2-34:2009 | Materials for printed boards and other interconnecting structures - Part 2-34: Reinforced base materials, clad and unclad - Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad |
| ISO/IEC TR 15443-3:2007 | Information technology Security techniques A framework for IT security assurance Part 3: Analysis of assurance methods |
| PREN 50518 : DRAFT 2016 | MONITORING AND ALARM RECEIVING CENTRE |
| SAE ARP 6328 : 2016 | GUIDELINE FOR DEVELOPMENT OF COUNTERFEIT ELECTRONIC PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION SYSTEMS |
| PREN 9131 : 200P4 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - NONCONFORMANCE DATA DEFINITION AND DOCUMENTATION |
| UNI EN 9115 : 2013 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS - DELIVERABLE SOFTWARE (SUPPLEMENT TO EN 9100) |
| 16/30335561 DC : DRAFT APR 2016 | BS ISO 37102 - SUSTAINABLE DEVELOPMENT AND RESILIENCE OF COMMUNITIES - VOCABULARY |
| S.R. CEN/TS 15511:2008 | POSTAL SERVICES - QUALITY OF SERVICE - INFORMATION AVAILABLE ON POSTAL SERVICES |
| UNE-ISO 30302:2015 | Information and documentation. Management systems for records. Guidelines for implementation |
| CSA ISO 5832-2 : 0 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 2: UNALLOYED TITANIUM |
| CSA ISO 10003 : 2008 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| SAE AS 13001A : 2017 | DELEGATED PRODUCT RELEASE VERIFICATION TRAINING REQUIREMENTS |
| SAE AS 9117 : 2016 | DELEGATED PRODUCT RELEASE VERIFICATION |
| S.R. CWA 15661:2007 | PROVIDING E-LEARNING SUPPLIES TRANSPARENCY PROFILES |
| DIN CEN/TS 15472;DIN SPEC 16590:2016-08 | POSTAL SERVICES - METHOD FOR MEASUREMENT OF PARCEL TRANSIT TIME FOR CROSS-BORDER PARCELS WITHIN THE EUROPEAN UNION AND EFTA USING TRACKING AND TRACING |
| ISO 80601-2-56:2017 | Medical electrical equipment — Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
| I.S. EN 61249-2-41:2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| I.S. ISO 26000:2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| UNI EN 16311 : 2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| UNI EN ISO 11608-5 : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS |
| AAMI IEC 62304 : 2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES |
| I.S. EN 50491-4-1:2012 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) |
| IEC TR 63039:2016 | Probabilistic risk analysis of technological systems - Estimation of final event rate at a given initial state |
| CSA ISO 16559 : 2015 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| SAE AS 9103 : 2012 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS |
| NF EN 9131 : 2017 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - NONCONFORMANCE DATA DEFINITION AND DOCUMENTATION |
| UNI ISO 13008 : 2014 | INFORMATION AND DOCUMENTATION - DIGITAL RECORDS CONVERSION AND MIGRATION PROCESS |
| IEC 61249-2-6:2003 | Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| NFPA 1951 : 2013 | PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| ISO 12749-5:2018 | Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 5: Nuclear reactors |
| ISO 15270:2008 | Plastics — Guidelines for the recovery and recycling of plastics waste |
| PD ES 59008-2:1999 | Data requirements for semiconductor die Vocabulary |
| ISO 35103:2017 | Petroleum and natural gas industries — Arctic operations — Environmental monitoring |
| CEI UNI EN ISO/IEC 17011 : 2008 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES |
| CEI UNI EN ISO 50001 : 2012 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| CSA Z24511 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF WASTEWATER UTILITIES AND FOR THE ASSESSMENT OF WASTEWATER SERVICES |
| BS EN 60812:2006 | Analysis techniques for system reliability. Procedure for failure mode and effects analysis (FMEA) |
| ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
| CSA Z17665-1:09 (R2019) | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations) |
| I.S. CLC/TS 61111:2006 | MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| AAMI ISO 11607-2 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
| OLF 070 : 2004 | |
| 14/30315275 DC : 0 | BS EN 9162 - AEROSPACE OPERATOR SELF-VERIFICATION PROGRAMS |
| BS 7520:1995 | Guide to quality assurance plans for tools for live working |
| UNE-EN 12764:2016 | Sanitary appliances - Specification for whirlpool baths |
| API 11D1 CHINESE : 2009 | PACKERS AND BRIDGE PLUGS |
| S.R. CEN/TR 15941:2010 | SUSTAINABILITY OF CONSTRUCTION WORKS - ENVIRONMENTAL PRODUCT DECLARATIONS - METHODOLOGY FOR SELECTION AND USE OF GENERIC DATA |
| I.S. EN 60870-5-6:2009 | TELECONTROL EQUIPMENT AND SYSTEMS - PART 5-6: GUIDELINES FOR CONFORMANCE TESTING FOR THE EN 60870-5 COMPANION STANDARDS |
| BS ISO 55002:2014 | Asset management. Management systems. Guidelines for the application of ISO 55001 |
| I.S. EN 62402:2007 | OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE |
| S.R. CWA 16335:2011 | BIOSAFETY PROFESSIONAL COMPETENCE |
| UNI ISO 10018 : 2013 | QUALITY MANAGEMENT - GUIDELINES ON PEOPLE INVOLVEMENT AND COMPETENCE |
| UNI ISO 20121 : 2013 | EVENT SUSTAINABILITY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| EN 13060:2014 | Small steam sterilizers |
| I.S. EN ISO/IEC 27000:2017 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY (ISO/IEC 27000:2016) |
| IPC 6011 GERMAN : 0 | GENERIC PERFORMANCE SPECIFICATION FOR PRINTED BOARDS |
| ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI TIR48 : 2015 | QUALITY MANAGEMENT SYSTEM (QMS) RECOMMENDATIONS ON THE APPLICATION OF THE U.S. FDAS CGMP FINAL RULE ON COMBINATION PRODUCTS |
| ANSI/AAMI/ISO 17664:2017 | PROCESSING OF HEALTH CARE PRODUCTS - INFORMATION TO BE PROVIDED BY THE MEDICAL DEVICE MANUFACTURER FOR THE PROCESSING OF MEDICAL DEVICES |
| I.S. EN ISO 17989-1:2015 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015) |
| SAE AS9101F:2016 | QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS |
| AAMI ISO 13408-5:2006(R2015) | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 5: STERILIZATION IN PLACE |
| S.R. CEN ISO TS 11133-1:2009 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GUIDELINES ON PREPARATION AND PRODUCTION OF CULTURE MEDIA - PART 1: GENERAL GUIDELINES ON QUALITY ASSURANCE FOR THE PREPARATION OF CULTURE MEDIA IN THE LABORATORY |
| ISO/TR 10013:2001 | Guidelines for quality management system documentation |
| PREN 287-1 : DRAFT 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| EN ISO 19011:2011 COR 2011 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS (ISO 19011:2011) |
| CEI EN 60966-3 : 2010 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI-FLEXIBLE COAXIAL CABLE ASSEMBLIES |
| I.S. EN 61069-8:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 8: ASSESSMENT OF OTHER SYSTEM PROPERTIES |
| BS EN 9104-001:2013 | Aerospace series. Quality management systems Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| ISO 11737-1:2018 | Sterilization of health care products — Microbiological methods — Part 1: Determination of a population of microorganisms on products |
| UNI EN ISO 12967-1 : 2011 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 1: ENTERPRISE VIEWPOINT |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| UNI ISO 30300 : 2013 | INFORMATION AND DOCUMENTATION - MANAGEMENT SYSTEMS FOR RECORDS - FUNDAMENTALS AND VOCABULARY |
| ISO 10393:2013 | Consumer product recall — Guidelines for suppliers |
| ISO 21101:2014 | Adventure tourism Safety management systems Requirements |
| I.S. EN 15224:2016 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| ISO 28801:2011 | Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ) |
| I.S. EN 60384-1:2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| EN ISO 22300:2018 | Security and resilience - Vocabulary (ISO 22300:2018) |
| CEN ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2009) |
| UNI EN 15001-2 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| I.S. EN 50286:1999 | ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
| S.R. CWA 15793:2011 | LABORATORY BIORISK MANAGEMENT |
| AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 14428:2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ISO 27608:2010 | Animal and vegetable fats and oils Determination of Lovibond colour Automatic method |
| S.R. CEN/TS 15472:2016 | POSTAL SERVICES - METHOD FOR MEASUREMENT OF PARCEL TRANSIT TIME FOR CROSS-BORDER PARCELS WITHIN THE EUROPEAN UNION AND EFTA USING TRACKING AND TRACING |
| ISO/IEC TR 90006:2013 | Information technology Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011 |
| ISO/TS 22745-2:2009 | Industrial automation systems and integration Open technical dictionaries and their application to master data Part 2: Vocabulary |
| I.S. EN ISO 13408-3:2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| ISO 18091:2014 | Quality management systems Guidelines for the application of ISO 9001:2008 in local government |
| UNE-ISO 20252:2012 | Market, opinion and social research. Vocabulary and service requirements. |
| UNE 66926:2012 | Quality management systems. Particular requirements for the application of UNE-EN ISO 9001:2008 to technical centers of digital tachographs. |
| ISO/IEC 33071:2016 | Information technology Process assessment An integrated process capability assessment model for Enterprise processes |
| CAN/CSA-C22.2 NO. 61511-1:17 | Functional safety — Safety instrumented systems for the process industry sector — Part 1: Framework, definitions, system, hardware and application programming requirements (Adopted IEC 61511-1:2016, second edition, 2016-02, with Canadian deviations) | Sécurité fonctionnelle — Systèmes instrumentes de sécurité pour le secteur des industries de transformation — Partie 1 : Cadre, définitions, exigences pour le système, le matériel et la programmation d’application (norme IEC 61511-1:2016 adoptée, deuxième édition, 2016-02, avec exigences propres au Canada) |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| BIS IS/ISO 10014 : 2006 | QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS |
| BS EN ISO 11133 : 2014 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA |
| ISO/IEC TR 20000-10:2015 | Information technology Service management Part 10: Concepts and terminology |
| ISO/TR 15801:2017 | Document management — Electronically stored information — Recommendations for trustworthiness and reliability |
| CSA ISO 19011 : 2012 : R2017 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| BS ISO 10290:1993 | Textiles. Cotton yarns. Specifications |
| I.S. EN 62282-4-102:2017 | FUEL CELL TECHNOLOGIES - PART 4-102: FUEL CELL POWER SYSTEMS FOR INDUSTRIAL ELECTRIC TRUCKS - PERFORMANCE TEST METHODS |
| ISO 16962:2017 | Surface chemical analysis Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry |
| AWWA B110 : 2009 | MEMBRANE SYSTEMS |
| CSA ISO 50001 : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| I.S. EN ISO 20815:2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
| UNI ISO/TS 10004 : 2011 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| NF EN 50207 : 2004 | RAILWAY APPLICATIONS - ELECTRONIC POWER CONVERTERS FOR ROLLING STOCK |
| ISO/IEC TS 33073:2017 | Information technology Process assessment Process capability assessment model for quality management |
| AQAP 2130 : 2009-11 | NATO QUALITY ASSURANCE REQUIREMENTS FOR INSPECTION AND TEST |
| I.S. EN 16622:2015 | SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| BS EN 30011-1:1993 | Guidelines for auditing quality systems Guidelines for auditing quality systems. Auditing |
| AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| I.S. EN ISO/IEC 17020:2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION (ISO/IEC 17020:2012) |
| PREN 14359 : DRAFT 2014 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| PREN 197-2 : DRAFT 2012 | CEMENT - PART 2: CONFORMITY EVALUATION |
| EN ISO 12944-4:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| I.S. EN 9131:2016 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - NONCONFORMANCE DATA DEFINITION AND DOCUMENTATION |
| UNE 189002:2012 | Hostess and staff service reception and support organization |
| BS EN 9120:2010 | Quality management systems. Requirements for aviation, space and defence distributors |
| IEC PAS 62239:2001 | Electronic component management plans |
| UNE-EN ISO 12967-2:2012 | Health informatics - Service architecture - Part 2: Information viewpoint (ISO 12967-2:2009) |
| ISO/TS 20658:2017 | Medical laboratories — Requirements for collection, transport, receipt, and handling of samples |
| UNI EN 15838 : 2010 | CUSTOMER CONTACT CENTRES - REQUIREMENTS FOR SERVICE PROVISION |
| UNE-EN ISO/IEC 80079-34:2012 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture |
| DD CEN ISO/TS 15877-7:2009 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity |
| ISO 25841:2017 | Female condoms — Requirements and test methods |
| CEN ISO/TS 17969:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - GUIDELINES ON COMPETENCY MANAGEMENT FOR WELL OPERATIONS PERSONNEL (ISO/TS 17969:2017) |
| UNI EN 16271 : 2013 | VALUE MANAGEMENT - FUNCTIONAL EXPRESSION OF THE NEED AND FUNCTIONAL PERFORMANCE SPECIFICATION - REQUIREMENTS FOR EXPRESSING AND VALIDATING THE NEED TO BE SATISFIED WITHIN THE PROCESS OF PURCHASING OR OBTAINING A PRODUCT |
| IEC 62279:2015 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| ISO 28598-1:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach |
| ONORM EN ISO 9004 : 2010 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| BS ISO 10003:2007 | Quality management. Customer satisfaction. Guidelines for dispute resolution external to organizations |
| UNI EN ISO 13408-3 : 2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
| API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| DEFSTAN 05-62(PT20)/1(1990) : 1990 | GUIDANCE ON QUALITY ASSURANCE PROCEDURES - PART 20: ARRANGEMENTS FOR GOVERNMENT QUALITY ASSURANCE BETWEEN SWITZERLAND AND THE UNITED KINGDOM |
| CEI EN 61249-2-27 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-27: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED WITH NON-HALOGENATED EPOXIDE WOVEN GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| CEI EN 61508-2 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
| UNE-EN 14428:2016 | Shower enclosures - Functional requirements and test methods |
| UNE-EN 13282-3:2015 | Hydraulic road binders - Part 3: Conformity evaluation |
| UNI EN 1474-2 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| NF EN 3388 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| UNI/TR 11217 : 2010 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF UNI EN ISO 9001:2008 IN LOCAL GOVERNMENT |
| UNI ISO 3534-2 : 2014 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS |
| CSA C22.2 No. 60601-1-10:2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| UNI ISO/TR 8550-3 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: SAMPLING BY VARIABLES |
| ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
| ISO/TR 14969:2004 | Medical devices Quality management systems Guidance on the application of ISO 13485: 2003 |
| ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 17007:2017 | Maintenance process and associated indicators |
| ISO/TR 31004:2013 | Risk management — Guidance for the implementation of ISO 31000 |
| ISO/TR 14873:2013 | Information and documentation Statistics and quality issues for web archiving |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| ISO/TS 12805:2011 | Nanotechnologies Materials specifications Guidance on specifying nano-objects |
| ISO/TR 17068:2012 | Information and documentation - Trusted third party repository for digital records |
| UNE-EN 12952-5:2012 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| ISO 22300:2018 | Security and resilience Vocabulary |
| ISO 22006:2009 | Quality management systems — Guidelines for the application of ISO 9001:2008 to crop production |
| ISO/TR 15686-11:2014 | Buildings and constructed assets — Service life planning — Part 11: Terminology |
| ISO Guide 73:2009 | Risk management — Vocabulary |
| ISO 10721-2:1999 | Steel structures — Part 2: Fabrication and erection |
| ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| I.S. EN 60393-1:2009 | POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| ISO 21368:2005 | Adhesives Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures |
| ISO/TR 8550-1:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 1: Acceptance sampling |
| ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity |
| EN 16844:2017 | Aesthetic medicine services - Non-surgical medical treatments |
| ISO/TR 8550-2:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 2: Sampling by attributes |
| ISO 14200:2012 | Space environment (natural and artificial) Guide to process-based implementation of meteoroid and debris environmental models (orbital altitudes below GEO + 2 000 km) |
| ISO/IEC Guide 76:2008 | Development of service standards Recommendations for addressing consumer issues |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| ISO/IEC 27036-1:2014 | Information technology Security techniques Information security for supplier relationships Part 1: Overview and concepts |
| BS EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| ISO 11505:2012 | Surface chemical analysis — General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry |
| BS EN ISO 15195:2003 | Laboratory medicine. Requirements for reference measurement laboratories |
| ISO 16730-1:2015 | Fire safety engineering Procedures and requirements for verification and validation of calculation methods Part 1: General |
| UNE-EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 15859-10:2004 | Space systems Fluid characteristics, sampling and test methods Part 10: Water |
| ISO 39001:2012 | Road traffic safety (RTS) management systems — Requirements with guidance for use |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003) |
| ISO 10377:2013 | Consumer product safety — Guidelines for suppliers |
| BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 37500:2014 | Guidance on outsourcing |
| IEC 62282-3-201:2017 | Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems |
| BS EN ISO 14971:2012 | Medical devices. Application of risk management to medical devices |
| ISO/IEC Guide 73:2002 | Risk management Vocabulary Guidelines for use in standards |
| ISO 18788:2015 | Management system for private security operations Requirements with guidance for use |
| IEC 61249-2-33:2009 | Materials for printed boards and other interconnecting structures - Part 2-33: Reinforced base materials, clad and unclad - Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad |
| S.R. OHSAS 18001:2007 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS |
| IEC TS 62239-1:2015 | Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan |
| ISO 24512:2007 | Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
| I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ISO/IEC 16085:2006 | Systems and software engineering Life cycle processes Risk management |
| I.S. EN ISO 17664:2017 | PROCESSING OF HEALTH CARE PRODUCTS - INFORMATION TO BE PROVIDED BY THE MEDICAL DEVICE MANUFACTURER FOR THE PROCESSING OF MEDICAL DEVICES (ISO 17664:2017) |
| ISO 15195:2003 | Laboratory medicine Requirements for reference measurement laboratories |
| UNE-EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| ISO 14300-2:2011 | Space systems — Programme management — Part 2: Product assurance |
| ISO 7195:2005 | Nuclear energy Packaging of uranium hexafluoride (UF6) for transport |
| BS EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) Determining the efficiency of filter elements |
| IEC 60393-1:2008 | Potentiometers for use in electronic equipment - Part 1: Generic specification |
| ISO 15388:2012 | Space systems — Contamination and cleanliness control |
| IEC 61249-2-19:2001 | Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad |
| UNE-EN 9100:2010 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| ISO 19258:2005 | Soil quality Guidance on the determination of background values |
| UNE-EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
| ISO 8373:1994 | Manipulating industrial robots — Vocabulary |
| I.S. EN 62304:2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
| I.S. EN ISO/IEC 17011:2017 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES (ISO/IEC 17011:2017) |
| ISO 17664:2017 | Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices |
| I.S. EN 16001:2009 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| UNI EN 1822-5 : 2010 | HIGH EFFICIENCY AIR FILTERS (EPA, HEPA AND ULPA) - PART 5: DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| ISO 5127:2017 | Information and documentation Foundation and vocabulary |
| DIN EN ISO 22005:2007-10 | TRACEABILITY IN THE FEED AND FOOD CHAIN - GENERAL PRINCIPLES AND BASIC REQUIREMENTS FOR SYSTEM DESIGN AND IMPLEMENTATION |
| DIN EN 13263-1:2009-07 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| DIN EN 12878:2014-07 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN ISO 14698-2 E : 2004 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA |
| DIN EN 12507:2005-12 | Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| EN 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| DIN EN 12186:2014-12 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| DIN EN ISO 11608-2 E : 2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES (ISO 11608-2:2012) |
| DIN EN 287-1:2011-11 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| DIN EN ISO 11608-3 E : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS (ISO 11608-3:2012) |
| DIN EN 1337-4 E : 2004 | STRUCTURAL BEARINGS - PART 4: ROLLER BEARINGS |
| DIN EN 15079 E : 2015 | COPPER AND COPPER ALLOYS - ANALYSIS BY SPARK OPTICAL EMISSION SPECTROMETRY (S-OES) |
| DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN ISO 15189:2014-11 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| DIN EN 486:2009-11 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| DIN EN ISO 10993-1:2010-04 | Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management system (ISO 10993-1:2009) |
| DIN EN ISO 11608-1:2015-04 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| IEC 61249-4-19:2013 | Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| ISO 17078-4:2010 | Petroleum and natural gas industries — Drilling and production equipment — Part 4: Practices for side-pocket mandrels and related equipment |
| BS EN 14726:2005 | Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis |
| IEC 62282-3-200:2015 | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods |
| BS EN 13889 : 2003 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY |
| ISO 19901-8:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations |
| IEC PAS 62647-2:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 2: Mitigation of the deleterious effects of tin |
| BS EN ISO 21351:2005 | Space systems. Functional and technical specifications |
| BS EN ISO 14698-2:2003 | Cleanrooms and associated controlled environments. Biocontamination control Evaluation and interpretation of biocontamination data |
| BS EN ISO 21649:2009 | Needle-free injectors for medical use. Requirements and test methods |
| BS EN 13263-2 : 2005 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| BS EN ISO 9875:2002 | Ships and marine technology. Marine echo-sounding equipment |
| BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
| BS EN 197-2:2014 | Cement Conformity evaluation |
| ISO 24511:2007 | Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services |
| ISO 13053-1:2011 | Quantitative methods in process improvement Six Sigma Part 1: DMAIC methodology |
| UNE-EN 12842:2013 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| IEC 60966-2-1:2008 | Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies |
| BS EN 12287:1999 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials |
| BS EN 14817:2006 | Railway applications. Suspension components. Air-spring control elements |
| UNE-EN ISO/IEC 19796-1:2010 | Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005) |
| ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| DIN EN 1337-4:2004-08 | Structural bearings - Part 4: Roller bearings |
| ISO 16904:2016 | Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals |
| IEC 62388:2013 | Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results |
| IEC 61249-2-41:2010 | Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| ISO/TS 17427:2014 | Intelligent transport systems Cooperative systems Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems |
| ISO 21649:2006 | Needle-free injectors for medical use — Requirements and test methods |
| I.S. EN 14080:2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| EN ISO 14698-2:2003/AC:2006 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA |
| UNI EN 13262 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| EN 9131:2016 | Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation |
| UNI EN 13260 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| I.S. EN ISO 14161:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNE-EN ISO/IEC 17021:2011 | Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) |
| ASTM E 2813 : 2012 | Standard Practice for Building Enclosure Commissioning |
| I.S. EN ISO 11737-2:2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| CSA ISO 19901-8 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS |
| UNI EN 13261 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS |
| EIA STD 4899 : 2017-05 | REQUIREMENTS FOR AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
| I.S. EN ISO 14040:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
| ISO 8178-1:2020 | Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| EN ISO 14050:2010 | Environmental management - Vocabulary (ISO 14050:2009) |
| UNE-EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| ASTM E 2813 : 2012 : EDT 1 | Standard Practice for Building Enclosure Commissioning |
| EN 13261:2009+A1:2010 | Railway applications - Wheelsets and bogies - Axles - Product requirements |
| I.S. EN ISO 14698-2:2003 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 2: EVALUATION AND INTERPRETATION OF BIOCONTAMINATION DATA |
| NASA MSFC STD 3619 : 2012 | MSFC COUNTERFEIT ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL PARTS AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION REQUIREMENTS FOR SPACE FLIGHT AND CRITICAL GROUND SUPPORT HARDWARE |
| EN 60895:2003 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and ± 600 kV d.c. |
| I.S. EN 13262:2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| OVE/ONORM EN 50128 : 2012 AC 2014 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| UNE-ISO 10018:2015 | Quality management. Guidelines on people involvement and competence |
| EN ISO 14161:2009 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| ONORM EN ISO 16106 : 2006 | PACKAGING - TRANSPORT PACKAGES FOR DANGEROUS GOODS - DANGEROUS GOODS PACKAGINGS, INTERMEDIATE BULK CONTAINERS (IBCS) AND LARGE PACKAGINGS - GUIDELINES FOR THE APPLICATION OF ISO 9001 |
| EN 1474-2:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
| CSA ISO 19901-8:15 (R2020) | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations (Adopted ISO 19901-8:2014, first edition, 2014-12-01) |
| UNE-EN ISO 22300:2015 | Societal security - Terminology (ISO 22300:2012) |
| EN ISO 14040:2006 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006) |
| EN 13260:2009+A1:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
| I.S. EN 13260:2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
| EIA 4899 : 2001 | STANDARD FOR PREPARING AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
| EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366-1:2015) |
| EN 50069:1991/corrigendum Aug. 2007 | WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| EN ISO 14698-1 : 2003 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS |
| I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| EN 1474-1:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms |
| EN 15161:2006 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| EN 16311:2013 | Engineering services - Terminology to describe engineering services for industrial products |
| EN 16001:2009 | Energy management systems - Requirements with guidance for use |
| EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| EN ISO/IEC 27043:2016 | Information technology - Security techniques - Incident investigation principles and processes (ISO/IEC 27043:2015) |
| EN ISO/IEC 17021-1:2015 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements (ISO/IEC 17021-1:2015) |
| EN ISO 16091:2002 | Space systems - Integrated logistic support (ISO 16091:2002) |
| UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| UNI EN 487 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS |
| UNI EN ISO 17078-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| UNI EN 12952-5 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| UNI EN 12159 : 2013 | BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| UNI EN 12186 : 2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| UNI EN 15167-2 : 2006 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
| UNI EN 505 : 2013 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET |
| UNI CEN ISO/TS 22367 : 2010 | MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT |
| UNI EN 13263-1 : 2009 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| UNI EN 12899-4 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 4: FACTORY PRODUCTION CONTROL |
| UNI EN 599-1 : 2014 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS |
| UNI EN ISO 15883-1 : 2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI EN 13889 : 2009 | FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY |
| PD 3542:1991 | The role of standards in company quality management |
| UNI EN 14679 : 2005 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| UNI EN 13802 : 2014 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| UNI EN 12842 : 2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| UNI EN 14080 : 2013 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| UNI EN ISO 15189 : 2013 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| UNI EN 13263-2 : 2009 | SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
| UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| UNI EN ISO 11608-2 : 2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES |
| UNI EN 15069 : 2009 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| BS OHSAS 18002:2008 | Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 |
| UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| IEC 61513:2011 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
| UNI EN ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNI EN ISO 11608-3 : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS |
| UNI EN ISO 14310 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| UNI EN 14588 : 2010 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| UNI EN 14180 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| UNI CEI EN ISO/IEC 19796-1 : 2010 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| UNI EN 1422 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| UNI EN 287-1 : 2012 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| UNI EN 12952-6 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| UNI EN 15619 : 2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| EN 45510-2-9:2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| UNI EN ISO 14998 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
| UNI EN 12899-5 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 5: INITIAL TYPE TESTING |
| UNI EN 14420-1 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, TYPES OF FIXING AND CONNECTION, DESIGNATION AND TESTING |
| UNI ISO 13053-2 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
| UNI EN 598 : 2009 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI EN 486 : 2009 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUSION INGOTS - SPECIFICATIONS |
| DIN ISO 20252:2006-09 | MARKET, OPINION AND SOCIAL RESEARCH - VOCABULARY AND SERVICE REQUIREMENTS |
| AQAP 2120 : 2009-10 | NATO QUALITY ASSURANCE REQUIREMENTS FOR PRODUCTION |
| BS ISO 7870-4:2011 | Control charts Cumulative sum charts |
| UNE-EN ISO 12696:2017 | Cathodic protection of steel in concrete (ISO 12696:2016) |
| DIN EN ISO 9241-210 : 2011-01 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 210: HUMAN-CENTRED DESIGN FOR INTERACTIVE SYSTEMS |
| ASTM D 5330/D5330M : 2006 : R2012 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| CEI EN 61249-4-19 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HICH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| DD ISO/PAS 30000:2008 | Ships and marine technology. Ship recycling management systems. Specifications for management systems for safe and environmentally sound ship recycling facilities |
| CSA ISO 11607-1 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| UNI ISO 2230 : 2009 | RUBBER PRODUCTS - GUIDELINES FOR STORAGE |
| UNI CEN/TS 15718 : 2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| UNI ISO/TS 29001 : 2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| DIN ISO/IEC 15504-1:2011-07 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 1: CONCEPTS AND VOCABULARY |
| API 2SC : 2010 | MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| BIS IS/ISO/TS 16949 : 2009 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| BS ISO 55001:2014 | Asset management. Management systems. Requirements |
| CSA Z24512 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| PD CEN/TR 15628:2007 | Maintenance. Qualification of maintenance personnel |
| ASTM F 2166 : 2002 | Standard Practices for Monitoring Non-Contact Dielectric Characterization Systems Through Use of Special Reference Wafers (Withdrawn 2003) |
| BS ISO 13053-2:2011 | Quantitative methods in process improvement. Six Sigma Tools and techniques |
| 02/560598 DC : DRAFT FEB 2002 | ISO/DIS 13485 - QUALITY SYSTEMS - MEDICAL DEVICES - SYSTEM REQUIREMENTS FOR REGULATORY PURPOSES |
| I.S. EN ISO 80601-2-56:2017 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-56: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CLINICAL THERMOMETERS FOR BODY TEMPERATURE MEASUREMENT (ISO 80601-2-56:2017) |
| ISO/TS 11356:2011 | Crop protection equipment Traceability Spray parameter recording |
| UNI EN ISO 10993-1 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| CSA Z24512 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 11607-1 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| DIN EN 15628:2014-10 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| ISO/IEC 15416:2016 | Automatic identification and data capture techniques — Bar code print quality test specification — Linear symbols |
| I.S. EN 62507-1:2011 | IDENTIFICATION SYSTEMS ENABLING UNAMBIGUOUS INFORMATION INTERCHANGE - REQUIREMENTS - PART 1: PRINCIPLES AND METHODS |
| UNE-ISO 10002:2015 | Quality management -- Customer satisfaction -- Guidelines for complaints handling in organizations |
| API RP 1174:2015 | RECOMMENDED PRACTICE FOR ONSHORE HAZARDOUS LIQUID PIPELINE EMERGENCY PREPAREDNESS AND RESPONSE |
| DIN EN ISO 19258:2016-05 (Draft) | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| BIS IS 13771 : 2013 | LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/-600 KV D.C. |
| 10/30235537 DC : 0 | BS EN 61249-4-18 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPEG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPEG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| 13/30280755 DC : 0 | BS EN 9116 - AEROSPACE SERIES - NOTICE OF CHANGE (NOC) REQUIREMENTS |
| PD ISO/IEC TR 38502:2017 | Information technology. Governance of IT. Framework and model |
| NASA CCSDS 652.0-M : ISSUE 1 | AUDIT AND CERTIFICATION OF TRUSTWORTHY DIGITAL REPOSITORIES |
| DIN EN 16323:2014-07 | GLOSSARY OF WASTEWATER ENGINEERING TERMS |
| ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC |
| EN 50657:2017 | Railways Applications - Rolling stock applications - Software on Board Rolling Stock |
| 14/30314227 DC : 0 | BS ISO 22514-4 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
| 16/30304049 DC : 0 | BS ISO 19826 - SPACE SYSTEMS - PROGRAMME MANAGEMENT - MANAGEMENT OF PRODUCT CHARACTERISTICS |
| ISO 80601-2-61:2017 | Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
| 03/307007 DC : DRAFT APR 2003 | ISO 20683-1 - AIR GROUND EQUIPMENT - DESIGN, TESTING AND MAINTENANCE REQUIREMENTS FOR TOWBARLESS TOWING VEHICLES - PART 1: TRANSPORT AIRCRAFT WITH A MAXIMUM RAMP MASS OVER 50 000 KG (110 000 LB) |
| BS EN 60966-2-1:2009 | Radio frequency and coaxial cable assemblies Sectional specification for flexible coaxial cable assemblies |
| DIN ISO 18436-3:2013-05 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 3: REQUIREMENTS FOR TRAINING BODIES AND THE TRAINING PROCESS (ISO 18436-3:2012) |
| DIN EN 15331 E : 2011 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
| XP PREN 9101 : 2010 XP | QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS |
| BS ISO 29400:2015 | Ships and marine technology. Offshore wind energy. Port and marine operations |
| BS EN 61249-2-22:2005 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| 16/30341010 DC : 0 | BS EN 50239 - RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING TRAFFIC |
| PREN 13802 : DRAFT 2012 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
| PREN 12878 : DRAFT 2012 | PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
| DIN EN 1474-1:2009-03 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| CEI EN 61249-2-21 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-21: REINFORCED BASE MATERIALS, CLAD AND UNCLAD NON-HALOGENATED EPOXIDE WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| CEI EN 50068 : 1998 | WROUGHT STEEL ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| I.S. CWA 14644:2003 | QUALITY ASSURANCE STANDARDS |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
| BS ISO 27026:2011 | Space systems. Programme management. Breakdown of project management structures |
| AAMI TIR36 : 2007 | VALIDATION OF SOFTWARE FOR REGULATED PROCESSES |
| 09/30199026 DC : 0 | BS ISO/IEC 17021-2 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS AND REQUIREMENTS FOR THIRD-PARTY CERTIFICATION AUDITING OF MANAGEMENT SYSTEMS - PART 2: REQUIREMENTS FOR THIRD PARTY CERTIFICATION AUDITING OF MANAGEMENT SYSTEMS |
| BS IEC 61511-1 : 2003 AMD 15776 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
| 14/30244508 DC : 0 | BS EN 62366-1 - MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| 01/704864 DC : DRAFT MAR 2001 | PREN ISO 10418 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - ANALYSIS, DESIGN, INSTALLATION AND TESTING OF BASIC SURFACE PROCESS SAFETY SYSTEMS |
| 08/30180551 DC : DRAFT APR 2008 | BS OHSAS 18002 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| BS ISO 39001:2012 | Road traffic safety (RTS) management systems. Requirements with guidance for use |
| ASTM E 2066 : 2000 : R2007 | Standard Guide for Validation of Laboratory Information Management Systems (Withdrawn 2015) |
| I.S. EN 13670:2009 | EXECUTION OF CONCRETE STRUCTURES |
| NF EN 9116 : 2016 | AEROSPACE SERIES - NOTICE OF CHANGE (NOC) REQUIREMENTS |
| BS EN 61249-4-18:2013 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| UNI EN 9104-003 : 2011 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) AUDITOR TRAINING AND QUALIFICATION |
| BS EN ISO 13408-3:2011 | Aseptic processing of health care products Lyophilization |
| UNI CEN/TR 14245 : 2015 | CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
| CSA ISO 20121 : 2013 | EVENT SUSTAINABILITY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| 06/30153125 DC : DRAFT JULY 2006 | BS ISO 10001 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES ON CODES OF CONDUCT |
| UTEC 96 027-1 : 2011 | ELECTRONIC EQUIPMENT OBSOLESCENCE - GUIDE APPLIED OBSOLESCENCE MANAGEMENT |
| 00/402294 DC : DRAFT MARCH 2000 | DRAFT BS ISO 10012 - MEASUREMENT CONTROL SYSTEM |
| BS EN 62309:2004 | Dependability of products containing reused parts. Requriements for functionality and tests |
| 03/652496 DC : DRAFT JUNE 2003 | ISO/IEC TR 15443-1 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - A FRAMEWORK FOR IT SECURITY ASSURANCE - PART 1: OVERVIEW AND FRAMEWORK |
| 07/30149142 DC : 0 | BS IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| 07/30042142 DC : 0 | BS ISO 10276 - NUCLEAR ENERGY - FUEL TECHNOLOGY - TRUNNIONS FOR PACKAGES USED TO TRANSPORT RADIOACTIVE MATERIAL |
| SBAC TS 157 : 6 | AEROSPACE SECTOR CERTIFICATION SCHEME (ASCS) - REQUIREMENTS AND PROCEDURES |
| UNI EN 15359 : 2011 | SOLID RECOVERED FUELS - SPECIFICATIONS AND CLASSES |
| UNI EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| 11/30247217 DC : 0 | BS EN 9131 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - NONCONFORMANCE DATA DEFINITION AND DOCUMENTATION |
| DD CEN/TS 1852-2:2009 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP) Guidance for the assessment of conformity |
| BS ISO/IEC 15940:2013 | Systems and software engineering. Software Engineering Environment Services |
| 13/30234873 DC : 0 | BS ISO 16439 - METHODS AND PROCEDURES FOR ASSESSING THE IMPACT OF LIBRARIES |
| PD ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| BS EN 61508-2:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems Requirements for electrical/electronic/ programmable electronic safety-related systems |
| DIN EN 15213-4 E : 2013 | INTELLIGENT TRANSPORT SYSTEMS - AFTER-THEFT SYSTEMS FOR THE RECOVERY OF STOLEN VEHICLES - PART 4: INTERFACE AND SYSTEM REQUIREMENTS IN TERMS OF LONG RANGE COMMUNICATION SYSTEM |
| CEI UNI EN 45510-4-5 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-5: BOILER AUXILIARIES - COAL HANDLING AND BULK STORAGE PLANT |
| AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PREN 1330-1 : DRAFT 2014 | NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| BS EN ISO/IEC 17065:2012 | Conformity assessment. Requirements for bodies certifying products, processes and services |
| PREN 15001-2 : DRAFT 2017 | GAS SUPPLY SYSTEMS - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| UNI ISO/TS 15530-4 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 4: EVALUATING TASK-SPECIFIC MEASUREMENT UNCERTAINTY USING SIMULATION |
| BS EN ISO 9606-1:2017 | Qualification testing of welders. Fusion welding Steels |
| 09/30210904 DC : 0 | BS EN 61249-2-27 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-27: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEMIDE/TRIAZINE MODIFIED WITH NON-HALOGENATED EPOXIDE WOVEN GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| 06/30147232 DC : DRAFT OCT 2006 | IEC 60601-1-10 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD - REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| ISO 16038:2017 | Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| PD ISO/TR 28380-3:2014 | Health informatics. IHE global standards adoption Deployment |
| 04/30117245 DC : DRAFT JUL 2004 | BS ISO 3534-2 - STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS |
| DD CEN/TS 14758-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD) Guidance for the assessment of conformity |
| BS ISO 30000:2009 | Ships and marine technology. Ship recycling management systems. Specifications for management systems for safe and environmentally sound ship recycling facilities |
| BS EN 61249-2-36:2009 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad. Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| 11/30247214 DC : 0 | BS EN 9104-001 - REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| FD ISO 10002 : 2014 FD | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR COMPLAINTS HANDLING IN ORGANIZATIONS |
| BIP 2020 : 2014 | THE BUSINESS IMPROVEMENT HANDBOOK |
| UNE-EN 16622:2016 | Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
| CAN/CSA-ISO/IEC/IEEE 15288:16 | Systems and software engineering - System life cycle processes (Adopted ISO/IEC/IEEE 15288:2015, first edition, 2015-05-15) |
| BS EN 61508-7:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures |
| BS ISO 8009:2014 | Mechanical contraceptives. Reusable natural and silicone rubber contraceptive diaphragms. Requirements and tests |
| DIN EN 16431 E : 2014 | RAILWAY APPLICATIONS - TRACK - HOLLOW SLEEPERS AND BEARERS |
| 15/30274542 DC : 0 | BS ISO 18480-1 - FACILITY MANAGEMENT - PART 1: TERMS AND DEFINITIONS |
| AAMI ISO 11737-1 : 2006 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
| ISO/TS 8000-150:2011 | Data quality Part 150: Master data: Quality management framework |
| FD ISO 10003 : 2008 FD | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| 08/30182164 DC : DRAFT MAY 2008 | BS ISO 31000 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES ON IMPLEMENTATION |
| BS ISO/IEC 12207:1995 | Information technology. Software life cycle processes |
| CEI EN 61249-4-17 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-17: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| BS 6068-5.42(2006) : 2006 | WATER QUALITY - GUIDANCE ON ASSURING THE QUALITY OF BIOLOGICAL AND ECOLOGICAL ASSESSMENTS IN THE AQUATIC ENVIRONMENT |
| PREN 14508 : DRAFT 2015 | POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE NON-PRIORITY MAIL AND SECOND CLASS MAIL |
| PD ISO/TR 31004:2013 | Risk management. Guidance for the implementation of ISO 31000 |
| 17/30338756 DC : 0 | BS ISO 80601-2-80 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-80: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF VENTILATORY SUPPORT EQUIPMENT FOR VENTILATORY INSUFFICIENCY |
| I.S. EN 12967-2:2007 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 2: INFORMATION VIEWPOINT |
| UNI EN ISO 13408-4 : 2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 4: CLEAN-IN-PLACE TECHNOLOGIES |
| 03/109280 DC : DRAFT AUG 2003 | BS ISO 14004 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
| CR 14269:2001 | Chemicals used for treatment of water intended for human consumption - Guidelines for the purchase |
| CSA INFORMATION SECURITY PACKAGE : 2018 | CONSISTS OF CAN/CSA-ISO/IEC 27000:18 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - OVERVIEW AND VOCABULARY; CAN/CSA-ISO/IEC 27001:14, INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS - REQUIREMENTS; CAN/CSA-ISO/IEC 27002:15 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION |
| UNI EN 15221-3 : 2011 | FACILITY MANAGEMENT - PART 3: GUIDANCE ON QUALITY IN FACILITY MANAGEMENT |
| UNI ISO 3951-4 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 4: PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS |
| 11/30240198 DC : 0 | BS ISO 16919 - SPACE DATA AND INFORMATION TRANSFER SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF CANDIDATE TRUSTWORTHY DIGITAL REPOSITORIES |
| BS ISO 50001 : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| GS NFV-REL 005 : 1.1.1 | NETWORK FUNCTIONS VIRTUALISATION (NFV); ACCOUNTABILITY; REPORT ON QUALITY ACCOUNTABILITY FRAMEWORK |
| PD IEC TR 62380:2004 | Reliability data handbook. Universal model for reliability prediction of electronics components, PCBs and equipment |
| BS ISO 20121:2012 | Event sustainability management systems. Requirements with guidance for use |
| PD ISO/IEC TR 24748-2:2011 | Systems and software engineering. Life cycle management Guide to the application of ISO/IEC 15288 (System life cycle processes) |
| 09/30210900 DC : 0 | BS EN 61249-2-40 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-40: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE, MODIFIED, NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| BS EN 61249-2-7:2002 | Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| 07/30156546 DC : 0 | BS EN 60300-3-16 - DEPENDABILITY MANAGEMENT - PART 3-16: APPLICATION GUIDE - GUIDELINE FOR THE SPECIFICATION OF MAINTENANCE SUPPORT SERVICES |
| BS EN 16730:2016 | Railway applications. Track. Concrete sleepers and bearers with under sleeper pads |
| BS EN 16601-00-01:2015 | Space systems. Glossary of terms |
| 14/30280850 DC : 0 | BS EN 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| UNE-ISO 30300:2011 | Information and documentation. Management system for records. Fundamentals and vocabulary . |
| 11/30173018 DC : 0 | BS EN ISO 15189 - MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| 09/30196441 DC : 0 | BS ISO 29990 - LEARNING SERVICES FOR NON-FORMAL EDUCATION AND TRAINING - BASIC REQUIREMENTS FOR SERVICE PROVIDERS |
| 16/30278559 DC : 0 | BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
| BS ISO 30302:2015 | Information and documentation. Management systems for records. Guidelines for implementation |
| 15/30279079 DC : 0 | BS ISO 18461 - INTERNATIONAL MUSEUM STATISTICS |
| BS ISO 16049-1:2013 | Air cargo equipment. Restraint straps Design criteria and testing methods |
| 03/303958 DC : DRAFT APR 2003 | EN 14679 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| BS ISO/IEC 90003:2014 | Software engineering. Guidelines for the application of ISO 9001:2008 to computer software |
| I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 12967-1:2007 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 1: ENTERPRISE VIEWPOINT |
| ISO/IEC 17021-3:2017 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for auditing and certification of quality management systems |
| 09/30184534 DC : DRAFT JAN 2009 | BS ISO/IEC 20000-1 - INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| UNE-EN 15359:2012 | Solid recovered fuels - Specifications and classes |
| CEI UNI EN ISO 14971 : 2013 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CEI EN 61249-2-1 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-1: REINFORCED BASE MATERIALS, CLAD AND UNCLAD PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS,ECONOMIC GRADE, COPPER CLAD |
| 12/30268625 DC : 0 | BS IEC/PAS 62814/ED1 - DEPENDABILITY OF SOFTWARE PRODUCTS CONTAINING REUSABLE COMPONENTS - GUIDANCE FOR FUNCTIONALITY AND TESTS |
| ISO 10381-3:2001 | Soil quality Sampling Part 3: Guidance on safety |
| BS EN ISO 11240:2012 | Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of units of measurement |
| CEI EN 61249-4-15 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-15: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| 15/30323937 DC : 0 | BS EN 3302 - AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION |
| UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| 14/30255584 DC : 0 | BS ISO 5127 - INFORMATION AND DOCUMENTATION - FOUNDATION AND VOCABULARY |
| BS ISO 17894:2005 | Ships and marine technology. Computer applications. General principles for the development and use of programmable electronic systems in marine applications |
| BS ISO 10794:2011 | Space systems. Programme management. Material, mechanical parts and processes |
| 12/30217456 DC : 0 | BS ISO 20140-1 - AUTOMATION SYSTEMS AND INTEGRATION - ENVIRONMENTAL AND ENERGY EFFICIENCY EVALUATION METHOD FOR MANUFACTURING SYSTEMS - PART 1: OVERVIEW AND GENERAL PRINCIPLES |
| IEC PAS 62129:2004 | Calibration of optical spectrum analyzers |
| BS ISO 6707-2:2017 | Buildings and civil engineering works. Vocabulary Contract and communication terms |
| 13/30263819 DC : 0 | BS ISO 6966-2 - AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
| 09/30182882 DC : 0 | BS ISO 29463-5 - HIGH-EFFICIENCY FILTERS AND FILTER MEDIA FOR REMOVING PARTICLES FROM AIR - PART 5: TEST METHOD FOR DETERMINING THE EFFICIENCY OF FILTER ELEMENTS |
| BS EN 15234-1:2011 | Solid biofuels. Fuel quality assurance General requirements |
| 17/30359426 DC : 0 | BS ISO 10003 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| CEI EN 62347 : 2007 | GUIDANCE ON SYSTEM DEPENDABILITY SPECIFICATIONS |
| ISO/IEC TR 17028:2017 | Conformity assessment Guidelines and examples of a certification scheme for services |
| BS ISO 16404:2013 | Space systems. Programme management. Requirements management |
| 13/30286760 DC : 0 | BS EN 9102 - AEROSPACE FIRST ARTICLE INSPECTION REQUIREMENT |
| 08/30181434 DC : DRAFT DEC 2008 | BS EN 12159 AMD1 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES |
| BIS IS 14686-4 : 2012 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES |
| UNE-EN ISO/IEC 17021-1:2015 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements (ISO/IEC 17021-1:2015) |
| DD ISO/TS 25138:2010 | Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry |
| 15/30280509 DC : 0 | BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY |
| 01/206145 DC : DRAFT AUG 2001 | |
| BS EN 61014:2003 | Programmes for reliability growth |
| 16/30344980 DC : 0 | BS ISO 20400 - SUSTAINABLE PROCUREMENT - GUIDANCE |
| UNE-EN 16848:2017 | Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet |
| DIN EN 16432-2 E : 2017 | RAILWAY APPLICATIONS - BALLASTLESS TRACK SYSTEMS - PART 2: SYSTEM DESIGN, SUBSYSTEMS AND COMPONENTS |
| BS ISO 5127:2017 | Information and documentation. Foundation and vocabulary |
| UNE-ISO/TR 17068:2013 | Information and documentation. Trusted third party repository for digital records. |
| 09/30201049 DC : 0 | BS EN 61249-2-41 ED.1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-41: REINFORCED BASED MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| 12/30259845 DC : 0 | BS ISO 2789 - INFORMATION AND DOCUMENTATION - INTERNATIONAL LIBRARY STATISTICS |
| PD CEN/TR 15941:2010 | Sustainability of construction works. Environmental product declarations. Methodology for selection and use of generic data |
| BS ISO 15859-12:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Carbon dioxide |
| 05/30113553 DC : DRAFT NOV 2005 | ISO 21350 - SPACE SYSTEMS - OFF THE SHELF ITEM UTILIZATION |
| 14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| ISA 84.00.01-1 : 2004 | FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
| DD IEC PAS 61906 : DRAFT DEC 2005 | PROCEDURE FOR THE DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONIC INDUSTRY |
| I.S. EN 9103:2014 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS |
| UNE-ISO 10381-5:2010 | Soil quality -- Sampling -- Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination |
| UNE-EN 16265:2016 | Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
| BS EN ISO 28258:2013 | Soil quality. Digital exchange of soil-related data |
| PD CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity |
| BS ISO 10008:2013 | Quality management. Customer satisfaction. Guidelines for business-to-consumer electronic commerce transactions |
| ISO 15198:2004 | Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer |
| 17/30326658 DC : 0 | BS EN ISO 20186-1 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR VENOUS WHOLE BLOOD - PART 1: ISOLATED CELLULAR RNA |
| SAE ARP 9009 : 2017 | AEROSPACE CONTRACT CLAUSES |
| I.S. EN IEC 61249-2-46:2018 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-46: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF THERMAL CONDUCTIVITY (1.0W/M K) AND DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| 04/30040790 DC : DRAFT MARCH 2004 | ISO/IEC DTR 15443-2 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - A FRAMEWORK FOR IT SECURITY ASSURANCE - PART 2 - ASSURANCE METHODS |
| I.S. EN ISO 14050:2010 | ENVIRONMENTAL MANAGEMENT - VOCABULARY |
| I.S. EN 16848:2016 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| ISO 24510:2007 | Activities relating to drinking water and wastewater services — Guidelines for the assessment and for the improvement of the service to users |
| PD CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2 |
| 16/30333694 DC : 0 | BS EN ISO 14253-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS |
| UNE-EN 15838:2010 | Customer Contact Centres - Requirements for service provision |
| PD ISO/TR 15801:2017 | Document management. Electronically stored information. Recommendations for trustworthiness and reliability |
| BS EN 62040-4:2013 | Uninterruptible power systems (UPS) Environmental aspects. Requirements and reporting |
| UNE-EN ISO 16559:2015 | Solid biofuels - Terminology, definitions and descriptions (ISO 16559:2014) |
| UNE-ISO 26000:2012 | Guidance on social responsibility |
| NASA STD 7009(INT) : 2006 | STANDARD FOR MODELS AND SIMULATIONS |
| DIN EN 16730:2016-09 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| 16/30312210 DC : 0 | BS ISO 6707-3 - BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY - PART 3: SUSTAINABILITY TERMS |
| 04/30119227 DC : DRAFT SEP 2004 | BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| 10/30238393 DC : 0 | BS ISO 10004 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| CEI EN 60966-2-1 : 2010 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-1: SECTIONAL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES |
| BS ISO 12308:2017 | Plain bearings. Quality assurance of sample types. Definitions, applications and testing |
| DIN EN 16887 E : 2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| ISO 24917:2010 | Space systems General test requirements for launch vehicles |
| 14/30273523 DC : 0 | BS EN ISO 9001 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| BS ISO 15859-13:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Breathing air |
| CEI EN 60966-1 : 2001 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION GENERAL REQUIREMENTS AND TEST METHODS |
| CEI EN 61513 : 2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS |
| ISO 28002:2011 | Security management systems for the supply chain — Development of resilience in the supply chain — Requirements with guidance for use |
| PD ISO/TR 19948:2016 | Earth-moving machinery. Conformity assessment and certification process |
| UNI EN 15357 : 2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| UNI CEN/TS 1555-7 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| NF EN 61291 5-2 : 2003 | OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS |
| UNI CEN ISO/TS 17427 : 2014 | INTELLIGENT TRANSPORT SYSTEMS - COOPERATIVE SYSTEMS - ROLES AND RESPONSIBILITIES IN THE CONTEXT OF COOPERATIVE ITS BASED ON ARCHITECTURE(S) FOR COOPERATIVE SYSTEMS |
| ISO/TR 28380-3:2014 | Health informatics IHE global standards adoption Part 3: Deployment |
| UTEC 90 720-1 : 2000 | ELECTRONIC ASSEMBLY TECHNOLOGY - MANUFACTURING LINE CERTIFICATION FOR ELECTRONIC BOARDS (QML) - PART 1: GUIDE FOR DESIGN AND MANUFACTURING OF ELECTRONIC ASSEMBLIES |
| PD ISO/IEC TR 24748-3:2011 | Systems and software engineering. Life cycle management Guide to the application of ISO/IEC 12207 (Software life cycle processes) |
| 13/30284114 DC : 0 | BS EN 61249-2-43 ED.1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-43: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGEN EPOXIDE CELLULOSE PAPER/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| BS EN 1474-1:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms |
| 00/402847 DC : DRAFT SEP 2000 | DRAFT BS EN ISO 9001 - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| ISO 27026:2011 | Space systems — Programme management — Breakdown of project management structures |
| BS ISO 16038:2017 | Male condoms. Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| CEI EN 50103 : 1996 | GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR THE ACTIVE (INCLUDING ACTIVE IMPLANTABLE) MEDICAL DEVICE INDUSTRY |
| BS ISO 9788:2017 | Air cargo. Double stud tie-down fittings. Design and testing requirements |
| BS EN 15628:2014 | Maintenance. Qualification of maintenance personnel |
| I.S. EN 82079-1:2012 | PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012 (EQV)) |
| 02/104824 DC : DRAFT JULY 2002 | BS EN 14516 - BATHS FOR DOMESTIC PURPOSES |
| BS ISO 10005:2005 | Quality management systems. Guidelines for quality plans |
| UNE-EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
| BS ISO/IEC 16085:2006 | Systems and software engineering. Life cycle processes. Risk management |
| ISO 10333-6:2004 | Personal fall-arrest systems — Part 6: System performance tests |
| UNE-EN 15331:2012 | Criteria for design, management and control of maintenance services for buildings |
| DIN EN 16751 E : 2016 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| ISO 10005:2005 | Quality management systems Guidelines for quality plans |
| BS EN 15331:2011 | Criteria for design, management and control of maintenance services for buildings |
| BS EN 61249-2-11:2003 | Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS PD TR 13480-7 : 2002 | METALLIC INDUSTRIAL PIPING - GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| 06/30149145 DC : DRAFT OCT 2006 | IEC 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| BS IEC 60748-23-1:2002 | Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification Generic specification |
| PD ISO/TS 37151:2015 | Smart community infrastructures. Principles and requirements for performance metrics |
| CEI UNI EN 45510-4-4 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-4: BOILER AUXILIARIES - FUEL PREPARATION EQUIPMENT |
| BS ISO 19258 : 2005 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| 02/106354 DC : DRAFT OCT 2002 | EN 12966-2 - VERTICAL ROAD TRAFFIC SIGNS - PART 2: VARIABLE MESSAGE SIGNS - INITIAL TYPE TESTING |
| BS EN ISO/IEC 17021-1:2015 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Requirements |
| DIN EN 16622 E : 2016 | SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| BS EN ISO/IEC 27043:2016 | Information technology. Security techniques. Incident investigation principles and processes |
| OHSAS 18002:2000 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007 |
| S.R. CEN/TR 15592:2007 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9004:2000 IN HEALTH SERVICES FOR PERFORMANCE IMPROVEMENT |
| BS EN ISO 16559:2014 | Solid biofuels. Terminology, definitions and descriptions |
| 13/30278077 DC : 0 | BS EN ISO 16904 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS |
| 14/30274238 DC : 0 | BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| 13/30241775 DC : 0 | BS EN ISO 16559 - SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| BS ISO 14200:2012 | Space environment (natural and artificial). Guide to process-based implementation of meteoroid and debris environmental models (orbital altitudes below GEO + 2 000 km) |
| ISO/IEC/IEEE 26513:2017 | Systems and software engineering — Requirements for testers and reviewers of information for users |
| ASTM E 2077 : 2000 : R2010 | Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
| BS ISO 21368:2005 | Adhesives. Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures |
| BS ISO 22300 : 2012 | SOCIETAL SECURITY - TERMINOLOGY |
| CEN/TR 15809:2008 | Characterization of sludges - Hygienic aspects - Treatments |
| 17/30341961 DC : 0 | BS EN ISO 14067 - GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION |
| 03/314215 DC : DRAFT OCT 2003 | ISO TR 14969 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| 13/30217541 DC : 0 | BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT |
| DD ISO/TS 22559-3:2011 | Safety requirements for lifts (elevators) Global conformity assessment procedures (GCAP). Prerequisites for certification of conformity of lift systems, lift components and lift functions |
| ISO/TR 19948:2016 | Earth-moving machinery Conformity assessment and certification process |
| 08/30193715 DC : 0 | BS EN 62246-1 ED.2 - REED SWITCHES - PART 1: GENERIC SPECIFICATION |
| BS EN 1325:2014 | Value Management. Vocabulary. Terms and definitions |
| BS ISO 11505:2012 | Surface chemical analysis. General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry |
| MIL-PRF-32550 Base Document:2016 | METAL-RICH PRIMER |
| BS ISO/IEC 27031:2011 | Information technology. Security techniques. Guidelines for information and communication technology readiness for business continuity |
| BS EN 16214-1:2012 | Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers Terminology |
| BS EN 16622:2015 | Silica-calcium fume for concrete. Definitions, requirements and conformity criteria |
| 08/30176353 DC : DRAFT MAR 2008 | BS ISO 12967-3 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 3: COMPUTATIONAL VIEWPOINT |
| BS ISO 15394:2017 | Packaging. Bar code and two-dimensional symbols for shipping, transport and receiving labels |
| BS EN 61249-4-2:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Multifunctional expoxide woven E-glass prepeg of defined flammability |
| I.S. EN 3389:2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| 10/30234886 DC : 0 | BS ISO 15388 - SPACE SYSTEMS - CONTAMINATION AND CLEANLINESS CONTROL |
| BS EN 61249-2-41:2010 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| DD CEN/TS 15358:2006 | Solid recovered fuels. Quality management systems. Particular requirements for their application to the production of solid recovered fuels |
| BS EN 62542:2013 | Environmental standardization for electrical and electronic products and systems. Glossary of terms |
| 14/30289280 DC : 0 | BS EN 12764 - SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| 08/30176193 DC : DRAFT JAN 2008 | BS EN 60966-3 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION FOR SEMI FLEXIBLE COAXIAL CABLE ASSEMBLIES |
| 03/109441 DC : DRAFT JUNE 2003 | EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| 03/101361 DC : DRAFT OCT 2003 | EN 13428 - PACKAGING - REQUIREMENTS SPECIFIC TO MANUFACTURING AND COMPOSITION - PREVENTION BY SOURCE REDUCTION |
| BS ISO 5598:2008 | Fluid power systems and components. Vocabulary |
| BS EN 82045-1:2001 | Document management Principles and methods |
| 16/30331325 DC : 0 | BS EN ISO 20166-3 - MOLECULAR IN VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE- EXAMINATION PROCESSES FOR FORMALIN-FIXED AND PARAFFIN-EMBEDDED (FFPE) TISSUE - PART 3: ISOLATED DNA |
| 14/30295496 DC : 0 | BS ISO 15394 - PACKAGING - BAR CODE AND TWO-DIMENSIONAL SYMBOLS FOR SHIPPING, TRANSPORT AND RECEIVING LABELS |
| BS ISO 16020:2005 | Steel for the reinforcement and prestressing of concrete. Vocabulary |
| BS EN 62347:2007 | Guidance on system dependability specifications |
| 09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
| DD CEN ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP) Guidance for the assessment of conformity |
| IEEE 15939-2008 | IEEE Standard Adoption of ISO/IEC 15939:2007--Systems and Software Engineering--Measurement Process |
| DD CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Guidance for the assessment of conformity |
| CEI EN 82045-1 : 2002 | DOCUMENT MANAGEMENT - PART 1: PRINCIPLES AND METHODS |
| BS ISO 13053-1:2011 | Quantitative methods in process improvement. Six Sigma DMAIC methodology |
| BS EN ISO 17989-1:2015 | Tractors and machinery for agriculture and forestry. Sustainability Principles |
| 17/30329617 DC : 0 | BS ISO/IEC 29110-4-3 - SYSTEMS AND SOFTWARE ENGINEERING - LIFECYCLE PROFILES FOR VERY SMALL ENTITIES (VSES) - PART 4-3: SERVICE DELIVERY - PROFILE SPECIFICATION |
| 03/109279 DC : DRAFT AUG 2003 | BS EN ISO 14001 - ENVIRONMENTAL MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| DD ISO/TS 22367 : 2008 | MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT |
| BS EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device |
| PD ISO/IEC Guide 73:2002 | Risk management. Vocabulary. Guidelines for use in standards |
| BS EN 61249-2-27:2013 | Materials for printed boards and other interconnecting structures Reinforced base materials clad and unclad. Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad |
| BS ISO 50007:2017 | Energy services. Guidelines for the assessment and improvement of the energy service to users |
| 02/210156 DC : DRAFT OCT 2002 | IEC 61249-2-26 ED.1 - MATERIALS FOR INTERCONNECTION STRUCTURES - PART 2-26: SECTIONAL SPECIFICATION SET FOR REINFORCED BASE MATERIALS, CLAD AND UNCLAD - SECTION 26: NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| BS EN 60300-3-14:2004 | Dependability management Application guide - Maintenance and maintenance support |
| BS ISO 16439:2014 | Information and documentation. Methods and procedures for assessing the impact of libraries |
| I.S. EN 62542:2013 | ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013 (EQV)) |
| UNI CEI EN ISO 14971 : 2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| BIS IS/ISO 19011 : 2011(R2016) | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| I.S. EN 50128:2011 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| BS ENISO 8373:2012 | Robots and robotic devices. Vocabulary |
| MIL-STD-1916 Base Document:1996 | DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT |
| 04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| 10/30208681 DC : DRAFT SEP 2010 | BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF SAFETY ASPECTS IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES |
| BS ISO/IEC 16350:2015 | Information technology. Systems and software engineering. Application management |
| 16/30349968 DC : 0 | BS EN 16602-80 - SPACE PRODUCT ASSURANCE - SOFTWARE PRODUCT ASSURANCE |
| 09/30211075 DC : 0 | BS EN 61249-2-39 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-39: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE EPOXCIDE AND NON-EPOXICDE, WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| ISO 14621-2:2003 | Space systems Electrical, electronic and electromechanical (EEE) parts Part 2: Control programme requirements |
| 15/30303638 DC : 0 | BS ISO 17068 - INFORMATION AND DOCUMENTATION - TRUSTED THIRD PARTY REPOSITORY FOR DIGITAL RECORDS |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| UNI CEI EN ISO/IEC 17000 : 2005 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| BS ISO 16412:2005 | Air cargo equipment. Air cargo pallets. Utilization guidelines |
| CSA ISO 10006 : 2003 : R2013 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS |
| 04/30108568 DC : 0 | ISO/IEC GUIDE 60 - CODE OF GOOD PRACTICE FOR CONFORMITY ASSESSMENT |
| UNI EN 1325 : 2014 | VALUE MANAGEMENT - VOCABULARY - TERMS AND DEFINITIONS |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| BS ISO 6707-1:2017 | Buildings and civil engineering works. Vocabulary General terms |
| ISO/PAS 30000:2008 | Ships and marine technology Ship recycling management systems Specifications for management systems for safe and environmentally sound ship recycling facilities |
| SAE AS 9116 : 2014 | AEROSPACE SERIES - NOTICE OF CHANGE (NOC) REQUIREMENTS |
| DIN EN ISO 11133 E : 2015 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO 11133:2014, CORRECTED VERSION 2014-11-01) |
| 02/400378 DC : DRAFT APR 2002 | ISO/DIS 10006 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS |
| CSA ISO 10003 : 2008 : R2017 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| BS EN 62065:2014 | Maritime navigation and radiocommunication equipment and systems. Track control systems. Operational and performance requirements, methods of testing and required test results |
| NFS 99 171 : 2006 | MAINTENANCE OF MEDICAL DEVICES - MODEL AND DEFINITION FOR ESTABLISHMENT AND MANAGEMENT OF THE MEDICAL DEVICE SECURITY, QUALITY AND MAINTENANCE REGISTER (RSQM) |
| DIN EN 15593 E : 2008 | PACKAGING - MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS |
| ASTM D 5330/D5330M : 2006 : R2012 : EDT 1 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| 03/647921 DC : DRAFT DEC 2003 | BS ISO/IEC 15504-1 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 1: CONCEPTS AND VOCABULARY |
| CSA ISO TR 14969 : 2005 : R2015 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| UNI ISO 28801 : 2014 | DOUBLE SAMPLING PLANS BY ATTRIBUTES WITH MINIMAL SAMPLE SIZES, INDEXED BY PRODUCER'S RISK QUALITY (PRQ) AND CONSUMER'S RISK QUALITY (CRQ) |
| BS PD IEC 62239 : 2001 | ELECTRONIC COMPONENT MANAGEMENT PLANS |
| 08/30143668 DC : DRAFT DEC 2008 | BS EN ISO 14005 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR THE PHASED IMPLEMENTATION OF AN ENVIRONMENTAL MANAGEMENT SYSTEM, INCLUDING THE USE OF ENVIRONMENTAL PERFORMANCE EVALUATION |
| BS EN 61243-2:1998 | Live working. Voltage detectors Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| BS EN 60872-1:1999 | Maritime navigation and radiocommunication equipment and systems. Radarp lotting aids Automatic radar plotting aids (ARPA). Methods of testing and required test results |
| ISO 15859-1:2004 | Space systems Fluid characteristics, sampling and test methods Part 1: Oxygen |
| I.S. EN 61511-2:2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1 |
| 02/211158 DC : DRAFT DEC 2002 | IEC 61249-4-5 ED.1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) |
| AAMI ISO 13408-1 : 2008 : INC : AMD 1 : 2013 : R201100 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| 16/30326000 DC : 0 | BS ISO/IEC 19770-1 - INFORMATION TECHNOLOGY - IT ASSET MANAGEMENT - PART 1: IT ASSET MANAGEMENT SYSTEMS - REQUIREMENTS |
| 16/30312185 DC : 0 | BS EN ISO/IEC 17011 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES |
| UNE-EN ISO/IEC 17065:2012 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
| BS 6068-6.16(1998) : 1998 | WATER QUALITY - SAMPLING - GUIDANCE ON BIOTESTING OF SAMPLES |
| DIN EN 16887:2015-07 (Draft) | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| API RP 2MOP : 2010 | MARINE OPERATIONS |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| PREN 9300-200 : DRAFT 2016 | AEROSPACE SERIES - LOTAR - LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA - PART 200: COMMON CONCEPTS FOR LONG TERM ARCHIVING AND RETRIEVAL OF PRODUCT STRUCTURE INFORMATION |
| ISO/IEC 29134:2017 | Information technology — Security techniques — Guidelines for privacy impact assessment |
| BS 7315(1990) : 1990 | SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| ISO 37153:2017 | Smart community infrastructures Maturity model for assessment and improvement |
| ISO 15161:2001 | Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| BS EN 60300-3-1:2004 | Dependability management. Application guide Analysis techniques for dependability. Guide on methodology |
| IEC PAS 62686-2:2016 | Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components |
| BS EN 9131:2016 | Aerospace series. Quality Management Systems. Nonconformance Data Definition and Documentation |
| CSA ISO/IEC 20000-2:2013 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: GUIDANCE ON THE APPLICATION OF SERVICE MANAGEMENT SYSTEMS |
| 17/30346185 DC : 0 | BS EN ISO 34101-4 - SUSTAINABLE AND TRACEABLE COCOA BEANS - PART 4: REQUIREMENTS FOR CERTIFICATION SCHEMES |
| TR 101 806 : 1.1.1 | HUMAN FACTORS (HF); GUIDELINES FOR TELECOMMUNICATION RELAY SERVICES FOR TEXT TELEPHONES |
| CSA ISO 10005 : 2005 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| ISO 8000-2:2017 | Data quality Part 2: Vocabulary |
| CSA ISO 14971 : 2007 : R2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO 19011 : 2012 | GUIDELINES FOR AUDITING MANAGEMENT SYSTEMS |
| UNI CEN/TS 13598-3 : 2012 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 3: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| 08/30160023 DC : DRAFT AUG 2008 | BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| CAN/CSA-ISO/IEC 26514:13 (R2017) | Systems and software engineering - Requirements for designers and developers of user documentation (Adopted ISO/IEC 26514:2008, first edition, 2008-06-15) |
| CSA ISO 14044 :2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
| UNI EN 1474-3 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| UNI ISO 22300 : 2013 | SOCIETAL SECURITY - TERMINOLOGY |
| UNI ISO 10003 : 2008 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR DISPUTE RESOLUTION EXTERNAL TO ORGANIZATIONS |
| UNI EN ISO 20857 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PREN 9121 : 200P3 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - ASSESSMENT APPLICABLE TO STOCKIST DISTRIBUTORS |
| CSA ISO 10007 : 2003 : R2013 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| INCITS/ISO/IEC 29109-1 : 2010 | INFORMATION TECHNOLOGY - CONFORMANCE TESTING METHODOLOGY FOR BIOMETRIC DATA INTERCHANGE RECORDS AS DEFINED IN ISO/IEC 19794 - PART 1: GENERALIZED CONFORMANCE TESTING METHODOLOGY |
| ISO 15859-7:2004 | Space systems Fluid characteristics, sampling and test methods Part 7: Hydrazine propellant |
| AAMI ISO 13408-1:2008 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| PREN 17141 : DRAFT 2017 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL |
| CSA ISO TR 14969 :2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| ISO 14470:2011 | Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
| CSA C50069 : 1999 : INC : UPD 1 : 1999 : R2012 : FR | WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| 16/30298078 DC : 0 | BS EN 82079-1 ED 2.0 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS |
| EN 14516:2015 | Baths for domestic purposes |
| BS ISO/IEC/IEEE 15939:2017 | Systems and software engineering. Measurement process |
| UNE 71362:2017 | Digital didactic material quality |
| DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| DIN EN 16457:2014-07 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| RG.AERO 00028 : 2005 | ED-80/RTCA DO254 APPLICATION GUIDE |
| UNE-EN 16271:2013 | Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| CSA ISO 9004-2 : 0 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES |
| CSA ISO 19901-6 : 2010 : INC : COR 1 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS |
| S.R. CEN/TR 15569:2009 | SOLID BIOFUELS - A GUIDE FOR A QUALITY ASSURANCE SYSTEM |
| SAE AS 9006 : 2013 | DELIVERABLE AEROSPACE SOFTWARE SUPPLEMENT FOR AS9100A - QUALITY MANAGEMENT SYSTEMS - AEROSPACE - REQUIREMENTS FOR SOFTWARE |
| PREN 9200 : 200P1 | AEROSPACE SERIES - PROGRAMME MANAGEMENT - GUIDELINES FOR PROJECT MANAGEMENT SPECIFICATION |
| UNE-EN 50128:2012 | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
| SAE AS 6496 : 2014 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - AUTHORIZED/FRANCHISED DISTRIBUTION |
| CEI EN 61249-2-26 : 2005 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-26: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES RENFORCEES EN TISSU DE VERRE DE TYPE EPOXYDE TISSE/NON TISSE, NON-HALOGENE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE), PLAQUEES CUIVRE |
| SAE ARP 9162 : 2017 | AEROSPACE OPERATOR SELF-VERIFICATION PROGRAMS |
| I.S. EN ISO 11608-5:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS (ISO 11608-5:2012) |
| IEC TR 61334-1-2:1997 | Distribution automation using distribution line carrier systems - Part 1-2: General considerations - Guide for specification |
| SAE AMS 3970/1 : 2011 | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 1 - GENERAL REQUIREMENTS |
| API 2MOP : 2010 : INC : ERR 1 : 2015 | MARINE OPERATIONS |
| ISO/TR 13014:2012 | Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| ISO/IEC 19770-1:2017 | Information technology — IT asset management — Part 1: IT asset management systems — Requirements |
| I.S. EN ISO 12944-4:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
| ISO 18676:2017 | Space systems — Guidelines for the management of systems engineering |
| AAMI ISO 14971 : 2007 : R2010 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| BS EN 61508-4:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Definitions and abbreviations |
| UNE-ISO/IEC 27000:2014 | Information technology -- Security techniques -- Information security management systems -- Overview and vocabulary |
| UNI ISO 10001 : 2008 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR CODES OF CONDUCT FOR ORGANIZATIONS |
| I.S. EN 1474-3:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| ASTM E 2513 : 2007 : R2012 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| I.S. EN ISO 14253-1:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2017) |
| AAMI ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE, AND INTERPRETATION OF RESULTS |
| I.S. EN 16311:2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| NFX 50 141-3 : 2006 | CUSTOMER-SUPPLIER RELATIONS - QUALITY OF DEMONSTRATIONS (TESTS, CALCULATIONS, SIMULATIONS, ETC.) - PART 3: GUIDELINES FOR REQUESTING AND CONDUCTING CALCULATIONS OR SIMULATIONS |
| GOST R ISO 10006 : 2005 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY MANAGEMENT IN PROJECTS |
| ONORM EN 9133 : 2006 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PARTS |
| ISO/TS 14048:2002 | Environmental management — Life cycle assessment — Data documentation format |
| CEI EN 60384-16 : 2006 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS |
| CEI EN 61249-2-42 : 2011 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN / WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| SAE AS 9138 : 2018 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS |
| I.S. EN 61249-4-18:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| API Q1 SPANISH : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| I.S. EN ISO 19901-8:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 8: MARINE SOIL INVESTIGATIONS (ISO 19901-8:2014) |
| I.S. EN 16991:2018 | RISK-BASED INSPECTION FRAMEWORK |
| I.S. 380:2007 | BEAUTY AND HOLISTIC THERAPY MANAGEMENT OF TRAINING CENTRES |
| I.S. EN 61014:2003 | PROGRAMMES FOR RELIABILITY GROWTH |
| IEEE 730-2014 REDLINE | IEEE Standard for Software Quality Assurance Processes |
| ISO 10007:2017 | Quality management — Guidelines for configuration management |
| CSA ISO 11607-2 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| IEEE 1490:2011 | IEEE GUIDE - ADOPTION OF THE PROJECT MANAGEMENT INSTITUTE STANDARD - A GUIDE TO THE PROJECT MANAGEMENT BODY OF KNOWLEDGE |
| I.S. EN IEC 61249-2-47:2018 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-47: REINFORCED BASE MATERIALS CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF THERMAL CONDUCTIVITY (2.0W/M K) AND DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| SAE AS 9110 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION MAINTENANCE ORGANIZATIONS |
| ISO 10576-1:2003 | Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles |
| UNE-EN 9104-001:2013 | Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs |
| I.S. EN ISO 16559:2014 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO 16559:2014) |
| IEEE/ISO/IEC 16085-2006 | ISO/IEC/IEEE International Standard - Systems and Software Engineering - Life Cycle Processes - Risk Management |
| UNI ISO/TS 22003 : 2014 | FOOD SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF FOOD SAFETY MANAGEMENT SYSTEMS |
| BS EN ISO/IEC 27000:2017 | Information technology. Security techniques. Information security management systems. Overview and vocabulary |
| UNI CEN/TR 13480-7 : 2012 | METALLIC INDUSTRIAL PIPING - PART 7: GUIDANCE ON THE USE OF CONFORMITY ASSESSMENT PROCEDURES |
| ISO/IEC Guide 53:2005 | Conformity assessment Guidance on the use of an organization's quality management system in product certification |
| ISO 15394:2017 | Packaging — Bar code and two-dimensional symbols for shipping, transport and receiving labels |
| UNI EN ISO 20815 : 2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
| AAMI ISO 13408-4 : 2005 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 4: CLEAN-IN-PLACE TECHNOLOGIES |
| I.S. EN 60903:2003 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| S.R. CEN TR 15628:2007 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| CEI UNI EN ISO 17034 : 1ED 2018 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| CEI UNI EN ISO/IEC 80079-34 : 2013 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| UNI EN ISO 11737-1 : 2006 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
| ISO 6966-2:2014 | Aircraft ground equipment — Basic requirements — Part 2: Safety requirements |
| BS EN ISO 12944-4:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Types of surface and surface preparation |
| I.S. EN 62065:2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - TRACK CONTROL SYSTEMS - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| I.S. EN ISO 12967-3:2011 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 3: COMPUTATIONAL VIEWPOINT |
| UNI CEI 70018 : 2009 | CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| I.S. EN 15331:2011 | CRITERIA FOR DESIGN, MANAGEMENT AND CONTROL OF MAINTENANCE SERVICES FOR BUILDINGS |
| I.S. CWA 14172-1:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 1: GENERAL INTRODUCTION |
| ISO 13008:2012 | Information and documentation — Digital records conversion and migration process |
| ANSI/ASSE Z690 PACKAGE : 2011 | ANSI/ASSE Z690.1-2011 - VOCABULARY FOR RISK MANAGEMENT; ANSI/ASSE Z690.2-2011 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES; ANSI/ASSE Z690.3-2011 - RISK ASSESSMENT TECHNIQUES; ISO/ANSI/ASSE/TR-31004-2014 (Z690 TR-2014) RISK MANAGEMENT-GUIDANCE FOR THE IMPLEMENTATION OF ISO 31004 |
| I.S. EN ISO 14065:2013 | GREENHOUSE GASES - REQUIREMENTS FOR GREENHOUSE GAS VALIDATION AND VERIFICATION BODIES FOR USE IN ACCREDITATION OR OTHER FORMS OF RECOGNITION (ISO 14065:2013) |
| UNI EN 16310 : 2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES |
| I.S. EN 9102:2015 | AEROSPACE SERIES - QUALITY SYSTEMS - FIRST ARTICLE INSPECTION REQUIREMENTS |
| NF ISO 20683-2 : 2005 | AIRCRAFT GROUND EQUIPMENT - DESIGN, TEST AND MAINTENANCE FOR TOWBARLESS TOWING VEHICLES (TLTV) INTERFACED WITH NOSE-LANDING GEAR - PART 2: REGIONAL AIRCRAFT |
| CSA Z15189 : 2003 | MEDICAL LABORATORIES - PARTICULAR REQUIREMENTS FOR QUALITY AND COMPETENCE |
| UNI EN ISO 17824 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
| I.S. EN ISO 13482:2014 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
| UNE ISO 20252 : 2012 | MARKET, OPINION AND SOCIAL RESEARCH - VOCABULARY AND SERVICE REQUIREMENTS |
| ISO 10381-1:2002 | Soil quality Sampling Part 1: Guidance on the design of sampling programmes |
| I.S. EN 16214-1:2012 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY |
| CSA CEI/IEC 62304:14 (R2019) | Medical device software - Software life cycle processes (Adopted CEI/IEC 62304:2006, first edition, 2006-05) | Logiciels de dispositifs médicaux - Processus du cycle de vie du logiciel (norme CEI/IEC 62304:2006 adoptée, première édition, 2006-05) |
| ANSI/ASSE Z690.1 : 2011 | VOCABULARY FOR RISK MANAGEMENT |
| I.S. EN 60300-2:2004 | DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY MANAGEMENT |
| CSA Z17665-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 9136:2018 | AEROSPACE SERIES - ROOT CAUSE ANALYSIS AND PROBLEM SOLVING (9S METHODOLOGY) |
| S.R. CEN ISO/TS 14907-1:2015 | ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015) |
| AQAP 2210 : 2015 | NATO SUPPLEMENTARY SOFTWARE QUALITY ASSURANCE REQUIREMENTS TO AQAP-2110 OR AQAP-2310 |
| PD ISO/TS 19930:2017 | Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 |
| I.S. EN 14516:2015 | BATHS FOR DOMESTIC PURPOSES |
| BS ISO 17034 : 2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| ISO/TR 12309:2009 | Health informatics Guidelines for terminology development organizations |
| ISO 30300:2011 | Information and documentation Management systems for records Fundamentals and vocabulary |
| IEEE C37.123-1996 | IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment |
| I.S. EN 50068:1991 | WROUGHT STEEL ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| ACMP-2100 : 2017 | THE CORE SET OF CONFIGURATION MANAGEMENT CONTRACTUAL REQUIREMENTS |
| ISO 15859-11:2004 | Space systems Fluid characteristics, sampling and test methods Part 11: Ammonia |
| I.S. EN 9101:2015 | QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANIZATIONS |
| AQAP 2000 : 2009 | NATO POLICY ON AN INTEGRATED SYSTEMS APPROACH TO QUALITY THROUGH THE LIFE CYCLE |
| NSF 347 : 2012 | SUSTAINABILITY ASSESSMENT FOR SINGLE PLY ROOFING MEMBRANES |
| UNE-EN ISO 14253-1:2015 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013) |
| ISO/IEC TS 25011:2017 | Information technology — Systems and software Quality Requirements and Evaluation (SQuaRE) — Service quality models |
| ISO 13485 - PRACTICAL GUIDE : 2016 | ISO 13485:2016 - MEDICAL DEVICES - A PRACTICAL GUIDE |
| ISO 10381-5:2005 | Soil quality Sampling Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination |
| ISO/TS 22163:2017 | Railway applications — Quality management system — Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector |
| BS EN 9104-002:2016 | Aerospace series. Quality management systems Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs |
| AIIM ARP2 : 2003 | THE ENTERPRISE INFORMATION TAG (EIT) - INFORMATION MANAGEMENT'S MISSING LINK |
| BS ISO 10381-2:2002 | Soil quality. Sampling Guidance on sampling techniques |
| EN 9120:2010 | Quality Management Systems - Requirements for Aviation, Space and Defence Distributors |
| UNI ISO 22514-1 : 2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS |
| AQAP 130 : 2 | NATO QUALITY ASSURANCE REQUIREMENTS FOR INSPECTION AND TEST |
| DIN 6779-10:2007-04 | STRUCTURING PRINCIPLES FOR TECHNICAL PRODUCTS AND TECHNICAL PRODUCT DOCUMENTATION - PART 10: POWER PLANTS |
| IWA 1:2005 | Quality management systems Guidelines for process improvements in health service organizations |
| I.S. EN 61249-4-19:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-19: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| SWIFT 31000:2010 | NATIONAL GUIDANCE ON IMPLEMENTING I.S. ISO 31000:2009 RISK MANAGEMENT - PRINCIPLES AND GUIDELINES |
| AQAP 120 : 2 | NATO QUALITY ASSURANCE REQUIREMENTS FOR PRODUCTION |
| I.S. EN 61249-2-7:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| PREN 14065 : DRAFT 2014 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| UNI EN ISO 11135 : 2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 6707-1:2017 | Buildings and civil engineering works Vocabulary Part 1: General terms |
| DIN EN ISO 22300:2014-12 | SOCIETAL SECURITY - TERMINOLOGY (ISO 22300:2012) |
| UNI EN ISO 19258 : 2011 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| BS EN ISO/IEC 17011:2017 | Conformity assessment. Requirements for accreditation bodies accrediting conformity assessment bodies |
| BS EN 9133:2004 | Aerospace series. Quality management systems. Qualification procedure for aerospace standard parts |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| EN 9136:2018 | Aerospace series - Root cause analysis and problem solving (9S Methodology) |
| 17/30334194 DC : 0 | BS EN 17095 - RAILWAY APPLICATIONS - ROLLING STOCK MAINTENANCE - MAINTENANCE RECORDS |
| UNE-EN ISO 11607-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006, including Amd 1:2014) |
| BS EN ISO 19157 : 2013 | GEOGRAPHIC INFORMATION - DATA QUALITY |
| ISO 18461:2016 | International museum statistics |
| I.S. EN 62474:2012 | MATERIAL DECLARATION FOR PRODUCTS OF AND FOR THE ELECTROTECHNICAL INDUSTRY (IEC 62474:2012 (EQV)) |
| DIN EN 14428 E : 2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 61355:1999 | CLASSIFICATION AND DESIGNATION OF DOCUMENTS FOR PLANTS, SYSTEMS AND EQUIPMENT |
| I.S. EN ISO/IEC 17000:2004 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| I.S. EN 61243-3:2014 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| UNI EN ISO 19157 : 2014 | GEOGRAPHIC INFORMATION - DATA QUALITY |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| UNI EN ISO 11607-1 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| CAN/CSA-C22.2 NO. 60896-22:17 | Stationary lead-acid batteries — Part 22: Valve regulated types - Requirements (Adopted IEC 60896-22:2004, first edition, 2004-02, with Canadian deviations) | Batteries stationnaires au plomb - Partie 22 : Types étanches à soupapes - Exigences (norme IEC 60896-22:2004 adoptée, première édition, 2004-02, avec exigences propres au Canada) |
| CEI EN 80001-1 : 2016 | APPLICATION OF RISK MANAGEMENT FOR IT-NETWORKS INCORPORATING MEDICAL DEVICES - PART 1: ROLES, RESPONSIBILITIES AND ACTIVITIES |
| CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2 |
| CLC/TS 61112:2006 | Blankets of insulating material for electrical purposes |
| ASTM E 2093 : 2012 : R2016 | Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization |
| CEI EN 62430 : 2011 | ENVIRONMENTALLY CONSCIOUS DESIGN FOR ELECTRICAL AND ELECTRONIC PRODUCTS |
| UNI CEI ISO/IEC 20000-2 : 2010 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: CODE OF PRACTICE |
| UNI/TR 11346 : 2010 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF UNI EN ISO 9001:2008 TO THE ORGANIZATIONS THAT PROVIDE SERVICES |
| I.S. EN 62040-4:2013 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 4: ENVIRONMENTAL ASPECTS - REQUIREMENTS AND REPORTING (IEC 62040-4:2013 (EQV)) |
| PREN 14516 : DRAFT 2015 | BATHS FOR DOMESTIC PURPOSES |
| SAE AS 9014 : 2015 | AMERICAS AEROSPACE QUALITY GROUP (AAQG) REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS |
| UNE-ISO/IEC 17021-2:2018 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems |
| CEN/TR 15569:2009 | Solid biofuels - A guide for a quality assurance system |
| ISO 19208:2016 | Framework for specifying performance in buildings |
| I.S. EN 3685:2008 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION |
| EN 60384-1:2016 | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| SAE AS 6462 : 2014 | AS5553A, FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION VERIFICATION CRITERIA |
| UNE-ISO 2859-3:2014 | Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures |
| EN ISO 13485:2016/AC:2018 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES (ISO 13485:2016) |
| EN ISO 9004:2018 | Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) |
| EN 9102:2015 | Aerospace series - Quality systems - First article inspection requirements |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| ISO 15859-12:2004 | Space systems Fluid characteristics, sampling and test methods Part 12: Carbon dioxide |
| ISO/TS 22002-3:2011 | Prerequisite programmes on food safety Part 3: Farming |
| ISO 29463-5:2011 | High-efficiency filters and filter media for removing particles in air Part 5: Test method for filter elements |
| EN 9110:2015 | Quality Management Systems - Requirements for Aviation Maintenance Organizations |
| ISO/TS 8000-311:2012 | Data quality — Part 311: Guidance for the application of product data quality for shape (PDQ-S) |
| ISO/TS 81346-3:2012 | Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system |
| UNI CEI EN ISO 50001 : 2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| ISO 10004:2012 | Quality management Customer satisfaction Guidelines for monitoring and measuring |
| EN ISO 11133:2014/A1:2018 | MICROBIOLOGY OF FOOD, ANIMAL FEED AND WATER - PREPARATION, PRODUCTION, STORAGE AND PERFORMANCE TESTING OF CULTURE MEDIA (ISO 11133:2014/AMD 1:2018) |
| ISO 17367:2013 | Supply chain applications of RFID — Product tagging |
| ISO/TS 37151:2015 | Smart community infrastructures Principles and requirements for performance metrics |
| EN 9101:2018 | Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations |
| ISO/IEC 25030:2007 | Software engineering Software product Quality Requirements and Evaluation (SQuaRE) Quality requirements |
| ISO/TS 25138:2010 | Surface chemical analysis Analysis of metal oxide films by glow-discharge optical-emission spectrometry |
| ISO 17894:2005 | Ships and marine technology Computer applications General principles for the development and use of programmable electronic systems in marine applications |
| ISO/IEC 15944-9:2015 | Information technology — Business operational view — Part 9: Business transaction traceability framework for commitment exchange |
| EN ISO 20815:2010 | Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15) |
| EN ISO 14044:2006/A1:2018 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006/AMD 1:2017) |
| ISO/IEC 40180:2017 | Information technology — Quality for learning, education and training — Fundamentals and reference framework |
| BS EN 12764 : 2015 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| ISO 14300-1:2011 | Space systems — Programme management — Part 1: Structuring of a project |
| ISO/IEC/IEEE 26512:2011 | Systems and software engineering Requirements for acquirers and suppliers of user documentation |
| PREN 17095 : DRAFT 2017 | RAILWAY APPLICATIONS - ROLLING STOCK MAINTENANCE - MAINTENANCE RECORDS |
| ISO 18602:2013 | Packaging and the environment — Optimization of the packaging system |
| ISO/IEC 25040:2011 | Systems and software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) Evaluation process |
| ISO 30302:2015 | Information and documentation Management systems for records Guidelines for implementation |
| I.S. EN 62508:2010 | GUIDANCE ON HUMAN ASPECTS OF DEPENDABILITY |
| ISO/IEC Guide 67:2004 | Conformity assessment Fundamentals of product certification |
| IEC 61511-2:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016 |
| ISO 29400:2015 | Ships and marine technology Offshore wind energy Port and marine operations |
| I.S. EN 9120:2010 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE DISTRIBUTORS |
| I.S. CWA 14172-6:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 6: SIGNATURE-CREATION DEVICE SUPPORTING SIGNATURES OTHER THAN QUALIFIED |
| I.S. EN 61230:2008 | LIVE WORKING - PORTABLE EQUIPMENT FOR EARTHING OR EARTHING AND SHORT-CIRCUITING |
| IWA 12:2013 | Guidelines on the application of ISO 9001:2008 in policing organizations |
| I.S. EN ISO 19258:2011 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| I.S. ISO 9004-2:1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES |
| ISO/IEC 12207:2008 | Systems and software engineering Software life cycle processes |
| IEC 61249-2-47:2018 | Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
| ISO 8009:2014 | Mechanical contraceptives — Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests |
| ISO 11748-1:2001 | Road vehicles — Technical documentation of electrical and electronic systems — Part 1: Content of exchanged documents |
| ISO/IEC TR 19759:2015 | Software Engineering Guide to the software engineering body of knowledge (SWEBOK) |
| ISO/IEC 15939:2007 | Systems and software engineering Measurement process |
| I.S. EN ISO 14006:2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| I.S. ISO 10006:2005 | QUALITY MANAGEMENT - GUIDELINES TO QUALITY MANAGEMENT IN PROJECTS |
| IEC 61511-2 REDLINE : 2ED 2016 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF IEC 61511-1: 2016 |
| I.S. EN 60872-1:1999 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - RADAR PLOTTING AIDS - PART 1: AUTOMATIC RADAR PLOTTING AIDS (ARPA) - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| ISO/TR 8550-3:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Sampling by variables |
| IEC 62845:2015 | Railway applications - Radio remote control system of traction vehicles for shunting application |
| S.R. CWA 15832:2008 | HUMANITARIAN MINE ACTION - FOLLOW-ON PROCESSES AFTER THE USE OF DEMINING MACHINES |
| IEC TR 62726:2014 | Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems |
| ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
| IEC 62820-3-2:2018 | Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) |
| EN ISO 19901-6:2009/AC:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS (ISO 19901-6:2009/COR 1:2011) |
| UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
| EN ISO 9875:2001/AC:2011 | SHIPS AND MARINE TECHNOLOGY - MARINE ECHO-SOUNDING EQUIPMENT |
| BS EN ISO 11607-1:2020 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| UNE-EN 1822-5:2010 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
| DIN EN 14817 E : 2006 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR SPRING CONTROL ELEMENTS |
| DIN EN ISO 16106:2006-06 | PACKAGING - TRANSPORT PACKAGES FOR DANGEROUS GOODS - DANGEROUS GOODS PACKAGINGS, INTERMEDIATE BULK CONTAINERS (IBCS) AND LARGE PACKAGINGS - GUIDELINES FOR THE APPLICATION OF ISO 9001 |
| DIN EN ISO 21649 E : 2010 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 11608-1 E : 2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
| DIN EN 15069 E : 2010 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| DIN EN 13802:2014-03 | Railway applications - Suspension components - Hydraulic dampers |
| DIN EN ISO 14040:2009-11 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006); German and English version EN ISO 14040:2006 |
| DIN EN 14679 E : 2005 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| DIN EN 13428:2004-10 | Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction |
| DIN EN 15049 E : 2007 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
| DIN EN 14080:2013-09 | TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
| DIN EN 502:2013-06 | ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET |
| DIN EN ISO 13485:2016-08 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
| DIN EN ISO 16426:2003-06 | FASTENERS - QUALITY ASSURANCE SYSTEM |
| UNE-EN 13230-1:2016 | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
| 04/30124829 DC : 0 | EN 15070 - STRIP WOUND FLEXIBLE SAFETY METALLIC HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS |
| IEC 61249-2-35:2008 | Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| 17/30365636 DC : 0 | BS EN 62239-1 ED.1.0 - PROCESS MANAGEMENT FOR AVIONICS - MANAGEMENT PLAN - PART 1: PREPARATION AND MAINTENANCE OF AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
| BS EN ISO 11608-2:2012 | Needle-based injection systems for medical use. Requirements and test methods Needles |
| PD IEC/TS 62239-1:2015 | Process management for avionics. Management plan Preparation and maintenance of an electronic components management plan |
| BS EN 599-1 : 2009 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS |
| PD IEC/PAS 62686-2:2016 | Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for passive components |
| BS EN 13263-1 : 2005 | SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
| IEC 80001-1:2010 | Application of risk management for IT-networks incorporating medical devices - Part 1: Roles, responsibilities and activities |
| BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
| BS EN 13428:2004 | Packaging. Requirements specific to manufacturing and composition. Prevention by source reduction |
| IEC 60300-3-16:2008 | Dependability management - Part 3-16: Application guide - Guidelines for specification of maintenance support services |
| BS EN 13612:2002 | Performance evaluation of in vitro diagnostic medical devices |
| BS EN 12258-2:2004 | Aluminium and aluminium alloys. Terms and definitions Chemical analysis |
| IEC 61751:1998 | Laser modules used for telecommunication - Reliability assessment |
| IEC 62542:2013 | Environmental standardization for electrical and electronic products and systems - Glossary of terms |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| UNE-EN 62429:2012 | Reliability growth - Stress testing for early failures in unique complex systems |
| ISO 26000:2010 | Guidance on social responsibility |
| IEC 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| IEC 62246-2:2007 | Reed contact units - Part 2: Heavy-duty reed switches |
| BS EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| IEC 60952-1:2013 | Aircraft batteries - Part 1: General test requirements and performance levels |
| ISO/IEC TR 20000-4:2010 | Information technology Service management Part 4: Process reference model |
| IEC 60870-5-6:2006 | Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards |
| ISO 22000:2005 | Food safety management systems Requirements for any organization in the food chain |
| BS EN 502:2013 | Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet |
| IEC 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
| BS EN 12186:2014 | Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements |
| UNI EN 197-2 : 2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
| BS EN 9121:2009 | Aerospace series. Quality management systems. Assessment applicable to stockist distributors |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks |
| ISO 13408-4:2005 | Aseptic processing of health care products — Part 4: Clean-in-place technologies |
| ISO 10001:2007 | Quality management Customer satisfaction Guidelines for codes of conduct for organizations |
| IEC 61249-2-30:2012 | Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-37:2008 | Materials for printed boards and other interconnecting structures - Part 2-37: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| IEC 61249-2-44:2016 | Materials for printed boards and other interconnecting structures - Part 2-44: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| ISO/IEC 15504-1:2004 | Information technology Process assessment Part 1: Concepts and vocabulary |
| ISO 14644-4:2001 | Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up |
| BS EN 1330-1:2014 | Non destructive testing. Terminology List of general terms |
| BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| UNE-EN ISO/IEC 17011:2017 | Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017) |
| BS EN 13262 : 2004 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELS - PRODUCT REQUIREMENTS |
| BS EN 9102:2015 | Aerospace series. Quality systems. First article inspection requirements |
| BS EN ISO 14040:2006 | Environmental management. Life cycle assessment. Principles and framework |
| ISO/IEC 80079-34:2011 | Explosive atmospheres Part 34: Application of quality systems for equipment manufacture |
| UNE-EN 1776:2017 | Gas infrastructure - Gas measuring systems - Functional requirements |
| UNE-EN 9103:2015 | Aerospace series - Quality management systems - Variation management of key characteristics |
| UNE-EN ISO 11133:2014 | Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media (ISO 11133:2014) |
| EN ISO 11737-2:2009 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
| UNE-EN 486:2010 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| IEC 62402:2007 | Obsolescence management - Application guide |
| BS EN 12967-1:2007 | Health informatics. Service architecture Enterprise viewpoint |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN 12967-2:2007 | Health informatics. Service architecture Information viewpoint |
| BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
| BS EN 12952-5:2011 | Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
| IEC 60895:2002 | Live working - Conductive clothing for use at nominal voltage up to 800 kV a.c. and +/- 600 kV d.c. |
| ISO 12967-3:2009 | Health informatics Service architecture Part 3: Computational viewpoint |
| BS EN 1776:2015 | Gas infrastructure. Gas measuring systems. Functional requirements |
| BS EN 13486:2002 | Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Periodic verification |
| ISO 17824:2009 | Petroleum and natural gas industries Downhole equipment Sand screens |
| BS EN ISO 11608-3:2012 | Needle-based injection systems for medical use. Requirements and test methods Finished containers |
| IEC 60384-1:2016 | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| BS EN ISO 17511:2003 | In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials |
| ISO 25378:2011 | Geometrical product specifications (GPS) Characteristics and conditions Definitions |
| UNE-EN ISO 4074:2016 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| ISO 13482:2014 | Robots and robotic devices Safety requirements for personal care robots |
| ISO 10003:2007 | Quality management Customer satisfaction Guidelines for dispute resolution external to organizations |
| UNE-EN 9121:2011 | Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000) |
| BS EN 1337-6:2004 | Structural bearings Rocker bearings |
| BS EN ISO 10417:2004 | Petroleum and natural gas industries. Subsurface safety valve systems. Design, installation, operation and redress |
| ISO 22005:2007 | Traceability in the feed and food chain General principles and basic requirements for system design and implementation |
| UNE-EN ISO 13485:2016 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
| ISO 14698-1:2003 | Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods |
| BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
| UNE-EN 487:2010 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| UNE-EN 12451:2013 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| UNE-EN 13802:2014 | Railway applications - Suspension components - Hydraulic dampers |
| EN ISO/IEC 80079-34:2011 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
| UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| BS EN ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials Criteria for the selection of the appropriate level of quality requirements |
| I.S. EN 197-2:2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| ISO/IEC 17065:2012 | Conformity assessment — Requirements for bodies certifying products, processes and services |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| IEC 61249-2-22:2005 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 14420-1:2013 | Hose fittings with clamp units Requirements, types of fixing and connection, designation and testing |
| ISO/TS 14907-1:2015 | Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures |
| BS EN 9200:2004 | Programme management. Guidelines for project management specification |
| IEC 62309:2004 | Dependability of products containing reused parts - Requirements for functionality and tests |
| BS EN 15161:2006 | Water conditioning equipment inside buildings. Installation, operation, maintenance and repair |
| UNE-EN 15079:2015 | Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES) |
| IEC 61014:2003 | Programmes for reliability growth |
| IEC 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| ISO 11064-7:2006 | Ergonomic design of control centres Part 7: Principles for the evaluation of control centres |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| ISO/IEC 33001:2015 | Information technology Process assessment Concepts and terminology |
| IEC 82045-1:2001 | Document management - Part 1: Principles and methods |
| ISO 13053-2:2011 | Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
| ISO/IEC TS 17021-3:2013 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 3: Competence requirements for auditing and certification of quality management systems |
| UNE-EN 599-1:2010 | Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class |
| IEC 62040-4:2013 | Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting |
| IEC 60872-1:1998 | Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 1: Automatic radar plotting aids (ARPA) - Methods of testing and required test results |
| IEC 61249-2-36:2008 | Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| IEC 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| IEC 61192-5:2007 | Workmanship requirements for soldered electronic assemblies - Part 5: Rework, modification and repair of soldered electronic assemblies |
| CEN/TR 14245:2014 | Cement - Guidelines for the application of EN 197-2 Conformity Evaluation |
| IEC 61478:2001+AMD1:2003 CSV | Live working - Ladders of insulating material |
| IEC 61249-2-42:2010 | Materials for printed boards and other interconnecting structures - Part 2-42: Reinforced base materials clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| BS EN 14679:2005 | Execution of special geotechnical works. Deep mixing |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| UNE-ISO 13053-2:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| I.S. EN ISO 10993-1:2009+AC:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009) |
| BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
| ISO 12696:2016 | Cathodic protection of steel in concrete |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| IEC 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| ISO 10417:2004 | Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress |
| IEC 60872-2:1999 | Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 2: Automatic tracking aids (ATA) - Methods of testing and required test results |
| ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
| DIN EN ISO 11608-2:2012-12 | Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012) |
| IEC 61249-4-12:2005 | Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| IEC 61249-2-39:2012 | Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| IEC 60300-3-1:2003 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
| ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
| ISO 20121:2012 | Event sustainability management systems — Requirements with guidance for use |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| BS EN 10266:2003 | Steel tubes, fittings and structural hollow sections. Symbols and definitions of terms for use in product standards |
| ISO/IEC 15504-5:2012 | Information technology Process assessment Part 5: An exemplar software life cycle process assessment model |
| BS EN ISO 22000:2005 | Food safety management systems. Requirements for any organization in the food chain |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| IEC 61243-3:2014 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| IEC 60936-2:1998 | Maritime navigation and radiocommunication equipment and systems - Radar - Part 2: Shipborne radar for high-speed craft (HSC) - Methods of testing and required test results |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| IEC 61249-2-23:2005 | Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad |
| ISO 28258:2013 | Soil quality Digital exchange of soil-related data |
| ISO 21351:2005 | Space systems Functional and technical specifications |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| BS EN 12952-6:2011 | Water-tube boilers and auxiliary installations Inspection during construction; documentation and marking of pressure parts of the boiler |
| IEC 61160:2005 | Design review |
| IEC 60601-1-10:2007+AMD1:2013 CSV | Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loopcontrollers |
| ISO 9875:2000 | Ships and marine technology — Marine echo-sounding equipment |
| ISO/IEC 17021:2011 | Conformity assessment Requirements for bodies providing audit and certification of management systems |
| IEC 61249-2-8:2003 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-38:2008 | Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| IEC 61811-54:2002 | Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base |
| IEC 60300-3-14:2004 | Dependability management - Part 3-14: Application guide - Maintenance and maintenance support |
| ISO 13408-3:2006 | Aseptic processing of health care products Part 3: Lyophilization |
| ISO 11608-1:2014 | Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems |
| IEC 62347:2006 | Guidance on system dependability specifications |
| BS EN ISO 17078-1 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| ISO/IEC 20000-2:2012 | Information technology Service management Part 2: Guidance on the application of service management systems |
| UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| UNE-EN 14516:2017 | Baths for domestic purposes |
| UNE-ISO 18091:2015 | Quality management systems -- Guidelines for the application of ISO 9001:2008 in local government |
| IEC 61229:1993+AMD1:1998+AMD2:2002 CSV | Rigid protective covers for live working on a.c. installations |
| BS EN 15049:2007 | Railway applications. Suspension components. Torsion bar, steel |
| IEC 61249-2-27:2012 | Materials for printed boards and other interconnecting structures - Part 2-27: Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
| UNE-EN ISO 19157:2014 | Geographic information - Data quality (ISO 19157:2013) |
| UNE-EN ISO 50001:2011 | Energy management systems - Requirements with guidance for use (ISO 50001:2011) |
| IEC 61249-4-2:2005 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| BS EN 14065:2016 | Textiles. Laundry processed textiles. Biocontamination control system |
| IEC 60966-3:2008 | Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies |
| UNE-EN 13262:2005 | Railway applications - Wheelsets and bogies - Wheels - Product requirement. |
| IEC 60079-19:2010+AMD1:2015 CSV | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| UNE-EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| ISO 17078-3:2009 | Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| BS EN ISO 15189:2012 | Medical laboratories. Requirements for quality and competence |
| IEC 60300-2:2004 | Dependability management - Part 2: Guidelines for dependability management |
| UNE-EN ISO 17100:2015 | Translation Services - Requirements for translation services (ISO 17100:2015) |
| BS EN 14080:2013 | Timber structures. Glued laminated timber and glued solid timber. Requirements |
| ISO 14065:2013 | Greenhouse gases Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition |
| ISO 4074:2015 | Natural rubber latex male condoms Requirements and test methods |
| ISO 23611-6:2012 | Soil quality — Sampling of soil invertebrates — Part 6: Guidance for the design of sampling programmes with soil invertebrates |
| ISO/IEC 19796-1:2005 | Information technology Learning, education and training Quality management, assurance and metrics Part 1: General approach |
| UNE-ISO 3951-2:2012 | Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| ISO 17034:2016 | General requirements for the competence of reference material producers |
| IEC 61249-2-4:2001 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| IEC 61249-4-1:2008 | Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability |
| ISO 11608-2:2012 | Needle-based injection systems for medical use Requirements and test methods Part 2: Needles |
| BS EN 12966-2:2005 | Road vertical signs. Variable message traffic signs Initial type testing |
| UNE-EN 13670:2013 | Execution of concrete structures |
| UNE-ISO 55001:2015 | Asset management. Management systems. Requirements. |
| BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| BS EN 9103:2014 | Aerospace series. Quality management systems. Variation management of key characteristics |
| EN 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| UNE-EN 502:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet |
| BS EN ISO 11064-7:2006 | Ergonomic design of control centres Principles for the evaluation of control centres |
| ISO/TS 14067:2013 | Greenhouse gases Carbon footprint of products Requirements and guidelines for quantification and communication |
| ISO/IEC 17021-1:2015 | Conformity assessment Requirements for bodies providing audit and certification of management systems Part 1: Requirements |
| ISO 11608-3:2012 | Needle-based injection systems for medical use Requirements and test methods Part 3: Finished containers |
| ISO 17078-1:2004 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
| BS EN 12966-3:2005 | Road vertical signs. Variable message traffic signs Factory production control |
| IEC 61209:1999 | Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results |
| EN ISO/IEC 27000:2017 | Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) |
| ISO 14050:2009 | Environmental management Vocabulary |
| UNE-EN 61243-3:2015 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| ISO 10012-1:1992 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
| ISO/IEC 17050-1:2004 | Conformity assessment Supplier's declaration of conformity Part 1: General requirements |
| BS EN 13298:2003 | Railway applications. Suspension components. Helical suspension springs, steel |
| BS EN ISO 13485:2016 | Medical devices. Quality management systems. Requirements for regulatory purposes |
| BS EN 12507:2005 | Transportation services. Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| BS EN 9104:2006 | Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/ registrations programs |
| EN 45510-2-9 : 2008 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS |
| EN 61751:1998 | Laser modules used for telecommunication - Reliability assessment |
| EN 61511-1:2017/A1:2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS |
| DIN EN ISO 11064-7:2006-08 | Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006) |
| EN 14817:2006 | Railway applications - Suspension components - Air spring control elements |
| EN 9121:2009 | Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000) |
| EN 9277:2015 | Aerospace series - Programme Management - Guide for the management of Systems Engineering |
| EN 14679:2005/AC:2006 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING |
| EN 486:2009 | Aluminium and aluminium alloys - Extrusion ingots - Specifications |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| EN 16602-20-07:2016 | Space product assurance - Quality and safety assurance for space test centres |
| EN ISO 17100:2015/A1:2017 | TRANSLATION SERVICES - REQUIREMENTS FOR TRANSLATION SERVICES - AMENDMENT 1 (ISO 17100:2015/AMD 1:2017) |
| EN 16751 : 2016 | BIO-BASED PRODUCTS - SUSTAINABILITY CRITERIA |
| EN 16372:2014 | Aesthetic surgery services |
| BS 5750-3:1987 | Quality systems Specification for final inspection and test |
| EN 14359:2017 | Gas-loaded accumulators for fluid power applications |
| EN ISO 13408-5:2011 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
| EN 16271:2012 | Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| EN 450-2:2005 | Fly ash for concrete - Part 2: Conformity evaluation |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| EN 16887:2017 | Leather - Environmental footprint - Product Category Rules (PCR) - Carbon footprints |
| EN 16114:2011 | Management consultancy services |
| EN 45510-4-4:2002 | Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries - Fuel preparation equipment |
| EN 16263-1:2015 | Pyrotechnic articles - Other pyrotechnic articles - Part 1: Terminology |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN 14420-1:2013 | Hose fittings with clamp units - Part 1: Requirements, types of fixing and connection, designation and testing |
| EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
| EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
| EN 15221-5:2011 | Facility Management - Part 5: Guidance on Facility Management processes |
| EN 16601-00-01:2015 | Space systems - Glossary of terms |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN ISO 13408-1:2015 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
| EN 16622:2015 | Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
| EN 16214-1:2012 | Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology |
| EN 15038:2006 | Translation services - Service requirements |
| EN 15049:2007 | Railway applications - Suspension components - Torsion bar, steel |
| EN ISO 11608-2:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012) |
| EN ISO 21649:2009 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN 15001-2:2008 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| EN ISO 9241-420:2011 | Ergonomics of human-system interaction - Part 420: Selection of physical input devices (ISO 9241-420:2011) |
| EN 16310:2013 | Engineering services - Terminology to describe engineering services for buildings, infrastructure and industrial facilities |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN 9104-002:2016 | Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs |
| BS 600:2000 | A guide to the application of statistical methods to quality and standardization |
| EN 13980:2002 | Potentially explosive atmospheres - Application of quality systems |
| EN ISO 11064-7:2006 | Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006) |
| EN ISO 9004-1 : 1994 | QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS |
| EN ISO 19901-8:2015 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 8: Marine soil investigations (ISO 19901-8:2014) |
| EN ISO 17824 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
| EN 15079:2015 | Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES) |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| EN ISO 17989-1:2015 | Tractors and machinery for agriculture and forestry - Sustainability - Part 1: Principles (ISO 17989-1:2015) |
| EN 13889:2003+A1:2008 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
| EN 12159:2012 | Builders hoists for persons and materials with vertically guided cages |
| EN ISO 23611-6:2013 | Soil quality - Sampling of soil invertebrates - Part 6: Guidance for the design of sampling programmes with soil invertebrates (ISO 23611-6:2012) |
| EN ISO 16904:2016 | Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016) |
| EN ISO 11240:2012 | Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of units of measurement (ISO 11240:2012) |
| BS 5750-2:1987 | Quality systems Specification for production and installation |
| EN 14996:2006 | Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment |
| EN 16679:2014 | Packaging - Tamper verification features for medicinal product packaging |
| EN 9104:2006 | Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN 15221-3:2011 | Facility Management - Part 3: Guidance on quality in Facility Management |
| EN 15619:2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
| EN 16431:2014 | Railway applications - Track - Hollow sleepers and bearers |
| EN ISO 13408-4:2011 | Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 13408-4:2005) |
| EN ISO 11608-5:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation |
| EN ISO 17034:2016 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| EN 15259:2007 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
| EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| EN ISO 10407-2:2008/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
| EN 505:2013 | Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet |
| EN 14065:2016 | Textiles - Laundry processed textiles - Biocontamination control system |
| EN 15838:2009 | Customer Contact Centres - Requirements for service provision |
| EN 9104-003:2010 | Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification |
| EN ISO/TS 15877-7 : 2003 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
| EN ISO 9241-210:2010 | Ergonomics of human-system interaction - Part 210: Human-centred design for interactive systems (ISO 9241-210:2010) |
| EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
| EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
| EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| EN ISO 13940:2016 | Health informatics - System of concepts to support continuity of care (ISO 13940:2015) |
| EN 16603-40:2014 | Space engineering - Part 40: Software |
| EN 9116:2015 | Aerospace series - Notice of Change (NOC) Requirements |
| EN 16730:2016 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
| EN 1422:2014 | Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
| EN 16256-1:2012 | Pyrotechnic articles - Theatrical pyrotechnic articles - Part 1: Terminology |
| EN 599-1:2009+A1:2013 | Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class |
| EN ISO 25378:2011 | Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) |
| EN ISO 14644-4:2001 | Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up (ISO 14644-4:2001) |
| EN 1330-1:2014 | NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| EN 16603-10-06:2014 | Space engineering - Part 10-06: Technical requirements specification |
| EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| EN 13913:2003 | Railway applications - Rubber suspension components - Elastomer-based mechanical parts |
| EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
| EN ISO 28258:2013 | Soil quality - Digital exchange of soil-related data (ISO 28258:2013) |
| EN ISO 22000:2005 | Food safety management systems - Requirements for any organization in the food chain (ISO 22000:2005) |
| EN 9117:2017 | Aerospace series - Delegated Product Release Verification |
| EN 16265:2015 | Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
| EN 13597:2003 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| EN 1474-3:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems |
| EN ISO 19157:2013/A1:2018 | GEOGRAPHIC INFORMATION - DATA QUALITY - DESCRIBING DATA QUALITY USING COVERAGES (ISO 19157:2013/AMD 1:2018) |
| EN 13670:2009 | Execution of concrete structures |
| EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
| EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| EN ISO 21351:2005 | Space systems - Functional and technical specifications (ISO 21351:2005) |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| BS 5750-1:1987 | Quality systems Specification for design/development, production, installation and servicing |
| EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| EN ISO 10417:2004 | Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004) |
| EN ISO 17078-4:2010 | Petroleum and natural gas industries - Drilling and production equipment - Part 4: Practices for side-pocket mandrels and related equipment (ISO 17078-4:2010) |
| EN ISO/IEC 17021:2011 | Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011) |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| UNI EN 9100 : 2009 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| EN 3685 : 2008 | AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION |
| EN ISO 17665-1 : 2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN 14508:2016 | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| EN 487:2009 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| EN ISO 11608-3:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
| EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
| EN 13802:2013 | Railway applications - Suspension components - Hydraulic dampers |
| EN 3388 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| EN 15593:2008 | Packaging - Management of hygiene in the production of packaging for foodstuffs - Requirements |
| EN 9200:2004 | Aerospace series - Programme management - Guidelines for project management specification |
| EN ISO 16426:2002 | Fasteners - Quality assurance system (ISO 16426:2002) |
| EN ISO 9003:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR FINAL INSPECTION AND TEST |
| EN ISO 22005:2007 | Traceability in the feed and food chain - General principles and basic requirements for system design and implementation (ISO 22005:2007) |
| EN 3302:2017 | Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification |
| EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| EN 45510-4-5:2002 | Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries - Coal handling and bulk storage plant |
| EN ISO 13408-3:2011 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| EN 13612:2002/AC:2002 | PERFORMANCE EVALUATION OF IN VITRO DIAGNOSTIC MEDICAL DEVICES |
| EN ISO 4074:2015 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
| EN ISO/IEC 19796-1:2009 | Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005) |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| EN 3389 : 2009 | AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| EN 1614 : 2006 | HEALTH INFORMATICS - REPRESENTATION OF DEDICATED KINDS OF PROPERTY IN LABORATORY MEDICINE |
| EN 15221-4:2011 | Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management |
| I.S. EN 61229:1999 | RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS |
| SAE AS 9120 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS |
| IEEE/ISO/IEC 12207-2008 | ISO/IEC/IEEE International Standard - Systems and software engineering -- Software life cycle processes |
| ISO/IEC TR 33014:2013 | Information technology Process assessment Guide for process improvement |
| ISO/TS 17969:2017 | Petroleum, petrochemical and natural gas industries — Guidelines on competency management for well operations personnel |
| MEDDEV 2.12-1 : REV 8 : 2013 | GUIDELINES ON A MEDICAL DEVICES VIGILANCE SYSTEM |
| 17/30355188 DC : 0 | BS ISO/IEC 24748-1 - SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE MANAGEMENT - PART 1: GUIDELINES FOR LIFE CYCLE MANAGEMENT |
| ISO/TS 19264-1:2017 | Photography Archiving systems Image quality analysis Part 1: Reflective originals |
| ISO 15859-5:2004 | Space systems Fluid characteristics, sampling and test methods Part 5: Nitrogen tetroxide propellants |
| BS ISO 8000-8:2015 | Data quality Information and data quality: Concepts and measuring |
| PD ISO/IEC TR 29110-1:2016 | Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs) Overview |
| UNE-EN 15221-5:2012 | Facility Management - Part 5: Guidance on Facility Management processes |
| UNE-EN 16730:2017 | Railway applications - Track - Concrete sleepers and bearers with under sleeper pads |
| UNE-EN 16263-1:2016 | Pyrotechnics articles - Other pyrotechnic articles - Part 1: Terminology |
| API 7G-2 SPANISH : 2009 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| CSA ISO 10008 : 2015 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR BUSINESS-TO-CONSUMER ELECTRONIC COMMERCE TRANSACTIONS |
| CEI EN 60300-3-14 : 2005 | DEPENDABILITY MANAGEMENT - PART 3-14: APPLICATION GUIDE - MAINTENANCE AND MAINTENANCE SUPPORT |
| PD ISO/IEC TR 15443-3:2007 | Information technology. Security techniques. A framework for IT security assurance Analysis of assurance methods |
| 07/30171797 DC : 0 | BS ISO 10303-59 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 59: INTEGRATED GENERIC RESOURCE - QUALITY OF PRODUCT SHAPE DATA |
| 12/30209299 DC : 0 | BS ISO 10008 - QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR BUSINESS-TO-CONSUMER ELECTRONIC COMMERCE TRANSACTIONS |
| PREN 14420-1 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 1: REQUIREMENTS, SURVEY, DESIGNATION AND TESTING |
| BS EN 13282-3:2013 | Hydraulic road binders Conformity evaluation |
| DD ISO/TS 14048:2002 | Environmental management. Life cycle assessment. Data documentation format |
| DIN EN ISO 17989-1:2016-09 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SUSTAINABILITY - PART 1: PRINCIPLES (ISO 17989-1:2015) |
| BS ISO 28801:2011 | Double sampling plans by attributes with minimal sample sizes, indexed by producer\'s risk quality (PRQ) and consumer\'s risk quality (CRQ) |
| I.S. EN 60896-21:2004 | STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST |
| UNI ISO/TR 22514-4 : 2010 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
| UNI EN ISO 13482 : 2014 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS |
| UNE-EN 60300-3-16:2012 | Dependability management -- Part 3-16: Application guide - Guidelines for specification of maintenance support services |
| S.R. CEN/TR 16862:2015 | PLASTICS WELDING SUPERVISOR - TASK, RESPONSIBILITIES, KNOWLEDGE, SKILLS AND COMPETENCE |
| IPC 6011 : 0 | GENERIC PERFORMANCE SPECIFICATION FOR PRINTED BOARDS |
| API RP 14B : 2015 | DESIGN, INSTALLATION, OPERATION, TEST, AND REDRESS OF SUBSURFACE SAFETY VALVE SYSTEMS |
| PD ISO/TR 14873:2013 | Information and documentation. Statistics and quality issues for web archiving |
| 11/30197735 DC : 0 | BS ISO 10018 - QUALITY MANAGEMENT - GUIDELINES ON PEOPLE INVOLVEMENT AND COMPETENCES |
| 12/30264224 DC : 0 | BS EN 61511-1 ED.2 - FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
| ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| I.S. EN 14588:2010 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| MIL-STD-40051 Revision B:2003 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS |
| I.S. EN 61249-2-37:2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-37: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| CEI EN 50397-2 : 2011 | COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA |
| UNE-EN 9104-003:2011 | Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification |
| PD IEC PAS 62129:2004 | Calibration of optical spectrum analyzers |
| BS ISO 15161:2001 | Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| PREN 50128 : DRAFT 2009 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| 08/30191606 DC : 0 | BS ISO 24917 - SPACE SYSTEMS - GENERAL TEST REQUIREMENTS FOR LAUNCH VEHICLES |
| CAN/CSA-ISO/IEC TS 33052:18 | Information technology ? Process reference model (PRM) for information security management (Adopted ISO/IEC TS 33052:2016, first edition, 2016-06-15) |
| 00/203087 DC : DRAFT AUG 2000 | IEC 62147 - INTEGRATED CIRCUITS - UNIFIED QUALIFICATION STANDARD TO MEET IECQ AND END-USER CERTIFICATION |
| 10/30235392 DC : 0 | BS EN 287-1 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| BS ISO 15859-1:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Oxygen |
| ACI 121R : 2008 | GUIDE FOR CONCRETE CONSTRUCTION QUALITY SYSTEMS IN CONFORMANCE WITH ISO 9001 |
| DIN EN 15213-4:2013-08 | INTELLIGENT TRANSPORT SYSTEMS - AFTER-THEFT SYSTEMS FOR THE RECOVERY OF STOLEN VEHICLES - PART 4: INTERFACE AND SYSTEM REQUIREMENTS IN TERMS OF LONG RANGE COMMUNICATION SYSTEM |
| DIN ISO 29990:2010-12 | Learning services for non-formal education and training - Basic requirements for service providers (ISO 29990:2010) |
| DD CEN/TS 13476-4:2008 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity |
| BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
| BS EN ISO 17034:2016 | General requirements for the competence of reference material producers |
| 15/30246774 DC : 0 | BS EN 82304-1 - HEALTH SOFTWARE - PART 1: GENERAL REQUIREMENTS FOR PRODUCT SAFETY |
| 09/30180884 DC : 0 | BS EN 50128 - RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| DIN ISO/TS 81346-3;DIN SPEC 1330:2013-09 | INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012) |
| ANSI/MSE 2000 : 2008 | A MANAGEMENT SYSTEM FOR ENERGY |
| 14/30289416 DC : 0 | BS ISO 17689 - SPACE SYSTEMS - INTERFACE CONTROL DOCUMENTS BETWEEN GROUND SYSTEMS, GROUND SUPPORT EQUIPMENT AND LAUNCH VEHICLE WITH PAYLOAD |
| 11/30179635 DC : 0 | BS EN 13850 - POSTAL SERVICES - QUALITY OF SERVICES - MEASUREMENT OF THE TRANSIT TIME OF END-TO-END SERVICES FOR SINGLE PIECE PRIORITY MAIL AND FIRST CLASS MAIL |
| PD ISO/TS 18683:2015 | Guidelines for systems and installations for supply of LNG as fuel to ships |
| ISO 15859-9:2004 | Space systems Fluid characteristics, sampling and test methods Part 9: Argon |
| CAN/CSA-ISO 13485:16 | Medical devices - Quality management systems - Requirements for regulatory purposes (Adopted ISO 13485:2016, third edition, 2016-03-01) |
| BS ISO 20252:2012 | Market, opinion and social research. Vocabulary and service requirements |
| PD CEN/TR 14245:2014 | Cement. Guidelines for the application of EN 197-2 Conformity Evaluation |
| PD ISO/TR 12309:2009 | Health informatics. Guidelines for terminology development organizations |
| BS EN 16372:2014 | Aesthetic surgery services |
| BS EN 15221-4:2011 | Facility management Taxonomy, classification and structures in facility management |
| 13/30290564 DC : 0 | BS EN 9136 - AEROSPACE SERIES - ROOT CAUSE ANALYSIS AND PROBLEM SOLVING (9S METHODOLOGY) |
| UNE-EN 9131:2016 | Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation |
| BS EN ISO/IEC 19796-1:2009 | Information technology. Learning, education and training. Quality management, assurance and metrics General approach |
| I.S. CEN TS 15358:2006 | SOLID RECOVERED FUELS - QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THEIR APPLICATION TO THE PRODUCTION OF SOLID RECOVERED FUELS |
| BS EN ISO 16904:2016 | Petroleum and natural gas industries. Design and testing of LNG marine transfer arms for conventional onshore terminals |
| UNE-ISO 3534-2:2013 | Statistics -- Vocabulary and symbols -- Part 2: Applied statistics |
| NAAMM DEMA 111970 : 2012 | GUIDE SPECIFICATIONS FOR SECURITY METAL CEILINGS |
| I.S. EN 61249-2-27:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-27: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BISMALEIMIDE/TRIAZINE MODIFIED WITH NON-HALOGENATED EPOXIDE WOVEN GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD (IEC 61249-2-27:2012 (EQV)) |
| 17/30364380 DC : 0 | BS EN 50064 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES |
| SAE AS 9104 : 2017 | REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM CERTIFICATION/REGISTRATIONS PROGRAMS |
| 18/30358588 DC : 0 | BS EN ISO 29001 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| BS EN 9116:2015 | Aerospace series. Notice of Change (NOC) Requirements |
| DIN EN 15628 E : 2014 | MAINTENANCE - QUALIFICATION OF MAINTENANCE PERSONNEL |
| BS EN 62282-4-102:2017 | Fuel cell technologies Fuel cell power systems for industrial electric trucks. Performance test methods |
| CEI EN 61249-2-38 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-38: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| 16/30338047 DC : 0 | BS EN 62287-2 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - CLASS B SHIPBORNE EQUIPMENT OF THE AUTOMATIC IDENTIFICATION SYSTEM (AIS) - PART 2: SELF-ORGANISING TIME DIVISION MULTIPLE ACCESS (SOTDMA) TECHNIQUES |
| BS EN 60393-1:2009 | Potentiometers for use in electronic equipment Generic specification |
| 08/30146353 DC : DRAFT MAR 2008 | BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| CEI EN 61249-4-1 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-1: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| UNE-EN 1325:2014 | Value Management - Vocabulary - Terms and definitions |
| I.S. CEN TS 14632:2006 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| CEI EN 61249-2-6 : 2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| 09/30202071 DC : 0 | BS EN 9115 - QUALITY MANAGEMENT SYSTEMS REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS - REQUIREMENTS FOR DELIVERABLE SOFTWARE |
| I.S. EN 50657:2017 | RAILWAYS APPLICATIONS - ROLLING STOCK APPLICATIONS - SOFTWARE ON BOARD ROLLING STOCK |
| I.S. EN 15038:2006 | TRANSLATION SERVICES - SERVICE REQUIREMENTS |
| CEI EN 60300-3-1 : 2005 | DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY |
| CEI UNI ISO/IEC 20000-2 : 2011 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 2: CODE OF PRACTICE |
| AAMI ISO TIR 11139 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - VOCABULARY |
| 03/315684 DC : DRAFT SEP 2003 | ISO 10019 - GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES |
| PD ISO/IEC TR 20000-11:2015 | Information technology. Service management Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: ITIL® |
| BS ISO/IEC 20000-2:2012 | Information technology. Service management Guidance on the application of service management systems |
| BS ISO 13009:2015 | Tourism and related services. Requirements and recommendations for beach operation |
| BS ISO 24512:2007 | Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
| CAN/CSA-ISO/IEC TR 29110-1:18 | Systems and software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 1: Overview (Adopted ISO/IEC TR 29110-1:2016, second edition, 2016-06-15) |
| 12/30252157 DC : 0 | BS ISO 10393 - CONSUMER PRODUCT RECALL - GUIDELINES |
| GEIA SSB 1 : 2000 | GUIDELINES FOR USING PLASTIC ENCAPSULATED MICROCIRCUITS AND SEMICONDUCTORS IN MILITARY, AEROSPACE AND OTHER RUGGED APPLICATIONS |
| I.S. CEN ISO TS 14907-1:2005 | ROAD TRANSPORT AND TRAFFIC TELEMATICS - ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES |
| BS ISO 14025 : 2006 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| BS EN 60870-5-6:2009 | Marine energy. Wave, tidal and other water current converters Scale testing of tidal stream energy systems |
| API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| ISO 55000:2014 | Asset management Overview, principles and terminology |
| DIN ISO 37500:2015-08 | GUIDANCE ON OUTSOURCING (ISO 37500:2014) |
| UNE-ISO 13008:2013 | Information and documentation. Digital records conversion and migration process. |
| 04/30122777 DC : DRAFT SEP 2004 | ISO 6966-2 - AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
| UNE-EN 9110:2015 | Quality Management Systems - Requirements for Aviation Maintenance Organizations |
| 16/30338037 DC : 0 | BS ISO/IEC 30754 - INFORMATION TECHNOLOGY - SOFTWARE TRUSTWORTHINESS - GOVERNANCE AND MANAGEMENT - SPECIFICATION |
| 12/30256067 DC | BS EN 12899-4 AMD1. Fixed, vertical road traffic signs. Part 4. Factory production control |
| BS ISO 30300:2011 | Information and documentation. Management systems for records. Fundamentals and vocabulary |
| I.S. EN 61160:2005 | DESIGN REVIEW |
| I.S. EN 61249-4-11:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-11: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - NON-HALOGENATED EPOXIDE, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| BS EN 61192-5:2007 | Workmanship requirements for soldered electric assemblies Rework, modification and repair of soldered electronic assemblies |
| DD CEN/TS 13244-7:2003 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Guidance for the assessment of conformity |
| I.S. EN 61249-2-4:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-4: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN/WOVEN FIBREGLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| 16/30282355 DC : 0 | BS ISO 35103 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OPERATIONS - ENVIRONMENTAL MONITORING |
| 15/30319759 DC : 0 | BS EN 13269 - MAINTENANCE - GUIDELINE ON PREPARATION OF MAINTENANCE CONTRACTS |
| CEI EN 62507-1 : 2011 | IDENTIFICATION SYSTEMS ENABLING UNAMBIGUOUS INFORMATION INTERCHANGE - REQUIREMENTS - PART 1: PRINCIPLES AND METHODS |
| BS PD ISO/IEC TS 17021-2 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 2: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS |
| 04/30123452 DC : DRAFT OCT 2004 | IEC 61249-2-22 ED 1 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-22: REINFORCED BASE MATERIALS CLAD AND UNCLAD - MODIFIED NONHALOGENATED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| PD ISO/IEC TR 24774:2010 | Systems and software engineering. Life cycle management. Guidelines for process description |
| PD ISO/IEC TS 33052:2016 | Information technology. Process reference model (PRM) for information security management |
| DIN EN ISO 18113-1:2013-01 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| API Q1 CHINESE : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ISO 10795:2011 | Space systems Programme management and quality Vocabulary |
| INCITS/ISO/IEC 19796-1 : 2008 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| 07/30088601 DC : 0 | BS EN 599-1 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS |
| BS ISO 14952-1:2003 | Space systems. Surface cleanliness of fluid systems Vocabulary |
| UNI ISO 22514-2 : 2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 2: PROCESS CAPABILITY AND PERFORMANCE OF TIME-DEPENDENT PROCESS MODELS |
| PREN 50126-5 : DRAFT 2012 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 5: FUNCTIONAL SAFETY - SOFTWARE |
| DIN EN 15619:2014-07 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| BS EN ISO 13408-4:2011 | Aseptic processing of health care products Clean-in-place technologies |
| DD IEC TS 62666 : DRAFT OCT 2010 | GUIDELINES FOR THE INCLUSION OF DOCUMENTATION ASPECTS IN PRODUCT STANDARDS |
| BS ISO 15859-11:2004 | Aerospace series. Space systems. Fluid characteristics, sampling and test methods Ammonia |
| BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
| CEI EN 62282-4-102 : 1ED 2017 | FUEL CELL TECHNOLOGIES - PART 4-102: FUEL CELL POWER SYSTEMS FOR INDUSTRIAL ELECTRIC TRUCKS - PERFORMANCE TEST METHODS |
| 07/30164957 DC : 0 | BS EN 61249-4-14 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-14: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| CEI UNI ISO/IEC 20000-1 : 2012 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| I.S. EN 62347:2007 | GUIDANCE ON SYSTEM DEPENDABILITY SPECIFICATIONS |
| ISO 22514-6:2013 | Statistical methods in process management — Capability and performance — Part 6: Process capability statistics for characteristics following a multivariate normal distribution |
| UNE-EN ISO 13940:2016 | Health informatics - System of concepts to support continuity of care (ISO 13940:2015) |
| DD IEC/TS 62239:2003 | Process management for avionics. Preparation of an electronic components management plan |
| 17/30289082 DC : 0 | BS ISO/IEC 29110-3-2 - SYSTEMS AND SOFTWARE ENGINEERING - LIFECYCLE PROFILES FOR VERY SMALL ENTITIES (VSES) - PART 3-2: CONFORMITY CERTIFICATION SCHEME |
| S.R. CEN/TR 15840:2009 | EVALUATION OF CONFORMITY OF FLY ASH FOR CONCRETE - GUIDELINES FOR THE APPLICATION OF EN 450-2 |
| 11/30239628 DC : 0 | BS ISO 18602 - PACKAGING AND THE ENVIRONMENT - OPTIMIZATION OF THE PACKAGING SYSTEM |
| BS ISO 10014:2006 | Quality management. Guidelines for realizing financial and economic benefits |
| BS ISO 6966-2:2014 | Aircraft ground equipment. Basic requirements Safety requirements |
| 13/30291609 DC : 0 | BS EN 60966-1 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND TEST METHODS |
| UNE-ISO 10004:2015 | Quality managemen. Customer satisfaction. Guidelines for monitoring and measuring |
| 99/201502 DC : 0 | |
| PD ISO/IEC TR 17028:2017 | Conformity assessment. Guidelines and examples of a certification scheme for services |
| BS ISO/IEC 30105-4:2016 | Information technology. IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes Terms and concepts |
| 07/30126052 DC : 0 | BS ISO 22514-1 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 1: GENERAL PRINCIPLES AND CONCEPTS |
| PD CEN/CLC ISO/IEC TS 17021-3:2016 | Conformity assessment. Requirements for bodies providing audit and certification of management systems Competence requirements for auditing and certification of quality management systems |
| BS EN 45510-4-5:2002 | Guide for the procurement of power station equipment. Boiler auxiliaries Coal handling and bulk storage plant |
| 01/205488 DC : DRAFT AUG 2001 | IEC 61318 ED.2 - LIVE WORKING - QUALITY ASSURANCE PLANS APPLICABLE TO TOOLS, DEVICES AND EQUIPMENT |
| API Q1 RUSSIAN : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY. |
| DD CEN/TS 15224:2005 | Health services. Quality management systems. Guide for the use of EN ISO 9001:2000 |
| DIN EN 16730 E : 2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| BS EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results |
| 06/30099978 DC : 0 | |
| 13/30283149 DC : 0 | BS EN 9104-002 - REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEMREGISTRATION/CERTIFICATION PROGRAMS |
| BS ISO/IEC 26702:2007 | Systems engineering. Application and management of the systems engineering process |
| 08/30184786 DC : DRAFT JUNE 2008 | BS ISO/IEC 26513 - SOFTWARE AND SYSTEMS ENGINEERING - REQUIREMENTS FOR ASSESSORS AND TESTERS OF USER DOCUMENTATION |
| 16/30343033 DC : 0 | BS ISO/IEC 17021-3 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| 03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| BS EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| BS ISO 28598-2:2017 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Coordinated single sampling plans for acceptance sampling by attributes |
| DD CEN/TS 15511:2008 | Postal services. Quality of service. Information available on postal services |
| IEC TS 62666:2016 | Guidelines for the inclusion of documentation aspects in product standards |
| BS ISO 24917:2010 | Space systems. General test requirements for launch vehicles |
| 07/30164969 DC : 0 | EN 61249-4-17 - MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-17: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - NON-HALOGENATED EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| 17/30310522 DC : 0 | BS EN 60812 ED 3.0 - FAILURE MODE AND EFFECTS ANALYSIS (FMEA) |
| 00/402848 DC : DRAFT SEP 2000 | DRAFT BS EN ISO 9004 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR PERFORMANCE IMPROVEMENT |
| BS EN 62343-2:2014 | Dynamic modules Reliability qualification |
| IEC 61249-2-46:2018 | Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly |
| DIN ISO/TS 16952-1:2007-03 | TECHNICAL PRODUCT DOCUMENTATION - REFERENCE DESIGNATION SYSTEM - PART 1: GENERAL APPLICATION RULES |
| UNE-CEN/CLC ISO/IEC/TS 17021-2:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC/TS 17021-2:2012) |
| UNE-EN 62282-3-201:2013 | Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems |
| UNE-EN ISO 12967-3:2012 | Health informatics - Service architecture - Part 3: Computational viewpoint (ISO 12967-3:2009) |
| 16/30299842 DC : 0 | BS EN 50518 - MONITORING AND ALARM RECEIVING CENTRE |
| S.R. CEN ISO TS 22367:2010 | MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT |
| S.R. CEN ISO/TS 22391-7:2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011) |
| BS ISO 28002:2011 | Security management systems for the supply chain. Development of resilience in the supply chain. Requirements with guidance for use |
| S.R. CEN GUIDE 14:2010 | COMMON POLICY GUIDANCE FOR ADDRESSING STANDARDIZATION ON QUALIFICATION OF PROFESSIONS AND PERSONNEL |
| I.S. EN 60966-4:2003 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION FOR SEMI-RIGID COAXIAL CABLE ASSEMBLIES |
| 06/30156812 DC : 0 | BS EN 15593 - PACKAGING. MANAGEMENT OF HYGIENE IN THE PRODUCTION OF PACKAGING FOR FOODSTUFFS - REQUIREMENTS |
| BS IEC 62246-2 : 2007 | REED CONTACT UNITS - PART 2: HEAVY-DUTY REED SWITCHES |
| I.S. EN 61249-2-42:2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| BS EN ISO 12967-1:2011 | Health informatics. Service architecture Enterprise viewpoint |
| ISO/IEC TR 20000-12:2016 | Information technology Service management Part 12: Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: CMMI-SVC |
| DIN EN 15224:2016-04 (Draft) | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| 10/30231944 DC : 0 | BS EN ISO 12967-2 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 2: INFORMATION VIEWPOINT |
| DIN EN 16457 E : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| CEI EN 62388 : 2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE RADAR - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| 16/30317155 DC : 0 | BS EN ISO 19258 - SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| PD CEN ISO/TR 14969:2005 | Medical devices. Quality management systems. Guidance on the application of ISO 13485:2003 |
| AAMI ISO 10993-1 : 2009 : R2013 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| BIP 2222 : 2012 | COMPLAINTS MANAGEMENT - TURNING NEGATIVES INTO POSITIVES (INCLUDING BS ISO 10002:2004 AND BS ISO 10003:2007) |
| NF EN ISO/IEC 80079-34 : 2011 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| CAN/CSA-ISO/IEC 33001:16 | Information technology Process assessment Concepts and terminology (Adopted ISO/IEC 33001:2015, second edition, 2015-03-01) |
| UNI EN 16114 : 2011 | MANAGEMENT CONSULTANCY SERVICES |
| CSA ISO/TS 11139 : 2018 | STERILIZATION OF HEALTH CARE PRODUCTS - VOCABULARY |
| NF EN 50286 : 2005 | ELECTRICAL INSULATING PROTECTIVE CLOTHING FOR LOW-VOLTAGE INSTALLATIONS |
| FD ISO/TS 16949 : 2009 FD | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| UNI CEI ISO/IEC 20000-1 : 2012 | INFORMATION TECHNOLOGY - SERVICE MANAGEMENT - PART 1: SERVICE MANAGEMENT SYSTEM REQUIREMENTS |
| 11/30253346 DC : 0 | BS ISO/IEC 19794-1:2011 - INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS - PART 1: FRAMEWORK |
| PD ISO/IEC TR 20000-10:2015 | Information technology. Service management Concepts and terminology |
| 16/30337296 DC : 0 | BS EN ISO 12944-4 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION |
| BS EN 60300-3-11:2009 | Dependability management Application guide. Reliability centred maintenance |
| BS ISO 11893:2011 | Space systems. Programme management. Project organization |
| 16/30334062 DC : 0 | BS ISO 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT SYSTEMS OF GASEOUS AND PARTICULATE EMISSIONS |
| BS QC 200012:1996 | Process assessment schedule for printed board design facilities |
| CSA ISO 5832-4 : 0 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 4: COBALT-CHROMIUM-MOLYBDENUM CASTING ALLOY |
| UNI EN ISO 23611-6 : 2013 | SOIL QUALITY - SAMPLING OF SOIL INVERTEBRATES - PART 6: GUIDANCE FOR THE DESIGN OF SAMPLING PROGRAMMES WITH SOIL INVERTEBRATES |
| DIN EN 16679 E : 2015 | PACKAGING - TAMPER VERIFICATION FEATURES FOR MEDICINAL PRODUCT PACKAGING |
| PD ISO/TR 21932:2013 | Sustainability in buildings and civil engineering works. A review of terminology |
| BS ISO 29990:2010 | Learning services for non-formal education and training. Basic requirements for service providers |
| DIN EN 16271:2013-03 | Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product |
| DIN EN 16431:2014-10 | RAILWAY APPLICATIONS - TRACK - HOLLOW SLEEPERS AND BEARERS |
| UNE-EN 15221-4:2012 | Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management |
| BS EN 61160:2005 | Design review |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| UNE-EN ISO 13408-5:2011 | Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006) |
| UNE-CEN/CLC ISO/IEC/TS 17021-3:2016 | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013) |
| I.S. ISO 10007:2005 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| 04/30122195 DC : DRAFT SEP 2004 | IEC 60747-1 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES AND INTEGRATED CIRCUITS - PART 1: GENERAL |
| I.S. EN 16730:2016 | RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| BS EN ISO 9004-1:1994 | Quality management and quality assurance standards. Guidelines |
| I.S. ISO 10002:2005 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR COMPLAINTS HANDLING IN ORGANIZATIONS |
| BS PD ISO/IEC TS 17021-3 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS |
| 14/30255138 DC : 0 | BS EN ISO 11607-2:2006/A1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| ANSI/AAMI/ISO 11607-1:2006/(R)2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| ISO 19826:2017 | Space systems Programme management Management of product characteristics |
| 06/30146759 DC : DRAFT FEB 2006 | EN 12967-1 - HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 1: ENTERPRISE VIEWPOINT |
| I.S. EN 61249-2-26:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-26: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| 04/30027988 DC : DRAFT FEB 2004 | BS ISO 19258 - SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES |
| BIS IS/ISO 50001 : 2011(R2017) | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| IPC-1401 CHINESE : 2017 | SUPPLY CHAIN SOCIAL RESPONSIBILITY MANAGEMENT SYSTEM GUIDANCE |
| INCITS/ISO/IEC 27043 : 2017 | INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INCIDENT INVESTIGATION PRINCIPLES AND PROCESSES |
| BS ISO/IEC 25030:2007 | Software engineering. Software product quality requirements and evaluation (SQuaRE). Quality requirements |
| 11/30207802 DC : 0 | BS ISO/IEC 27013 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - GUIDELINES ON THE INTEGRATED IMPLEMENTATION OF ISO/IEC 27001 AND ISO/IEC 20000-1 |
| 15/30317602 DC : 0 | BS ISO 15541 - SHIPS AND MARINE TECHNOLOGY - FIRE RESISTANCE OF NON-METALLIC HOSE ASSEMBLIES AND NON-METALLIC COMPENSATORS - REQUIREMENTS FOR THE TEST BENCH |
| BS ISO/IEC 27034-1:2011 | Information technology. Security techniques. Application security Overview and concepts |
| 04/300295 DC : 0 | IEC 62145 ED.1 - CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - BLANK DETAIL SPECIFICATION |
| MIL-A-48449 Revision A:1981 | Alignment Device, Optical, Gun Bore |
| 10/30217464 DC : 0 | BS ISO 28002 - SECURITY MANAGEMENT SYSTEMS FOR THE SUPPLY CHAIN - DEVELOPMENT OF RESILIENCY IN THE SUPPLY CHAIN - REQUIREMENTS WITH GUIDANCE FOR USE |
| BS ISO 14300-2:2011 | Space systems. Programme management Product assurance |
| BS EN 62366-1:2015 | Medical devices Application of usability engineering to medical devices |
| 16/30316718 DC : 0 | BS EN ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
| I.S. EN ISO 50001:2011 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
| 04/30124490 DC : DRAFT OCT 2004 | EN 15049 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL |
| 07/30160564 DC : 0 | BS ISO/IEC 15288 - SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| BS ISO 10381-1:2002 | Soil quality. Sampling Guidance on the design of sampling programmes |
| PD ISO/TS 22002-3:2011 | Prerequisite programmes on food safety Farming |
| BS ISO/IEC 27013:2015 | Information technology. Security techniques. Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1 |
| 12/30258438 DC : 0 | BS EN 61190-1-2 AMD 1ED.2 - ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-2: REQUIREMENTS FOR SOLDERING PASTES FOR HIGH-QUALITY INTERCONNECTS IN ELECTRONICS ASSEMBLY |
| PREN 50064 : DRAFT 2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES |
| 04/30092984 DC : DRAFT JAN 2004 | ISO 10005 - QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| DIN EN ISO 13408-3:2011-09 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
| BS PD ES 59008-4.3 : 2000 | DATA REQUIREMENTS FOR SEMICONDUCTOR DIE - PART 4-3: SPECIFIC REQUIREMENTS AND RECOMMENDATIONS - THERMAL |
| 98/402025 DC : DRAFT JAN 1998 | BS ISO 13448-1 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION-OF-PRIORITIES PRINCIPLE (APP) - PART 1: GUIDE TO THE APP APPROACH |
| 14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| 16/30331319 DC : 0 | BS EN ISO 20184-2 - MOLECULAR IN-VITRO DIAGNOSTIC EXAMINATIONS - SPECIFICATIONS FOR PRE-EXAMINATION PROCESSES FOR FROZEN TISSUE - PART 2: ISOLATED PROTEINS |
| BIP 2221 : 2013 | IMPLEMENTING AND IMPROVING AN ENERGY MANAGEMENT SYSTEM: HOW TO MEET THE REQUIREMENTS OF ISO 50001 |
| 12/30217447 DC : 0 | BS ISO 13611 - INTERPRETING - GUIDELINES FOR COMMUNITY INTERPRETING |
| DEFSTAN 59-36/4(1990) : 1990 | ELECTRONIC & ASSOCIATED ELECTRICAL COMPONENTS FOR DEFENCE PURPOSES - PROCEDURE FOR THE SELECTION & SPECIFICATION OF ELECTRONIC & ASSOCIATED ELECTRICAL COMPONENTS FOR USE IN DEFENCE EQUIPMENT |
| UNI EN ISO 16559 : 2014 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| 16/30336277 DC : 0 | BS EN 9101 - QUALITY MANAGEMENT SYSTEMS - AUDIT REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS |
| 03/102285 DC : DRAFT SEP 2003 | BS ISO 21247 - QUALITY PLANS FOR PRODUCT ACCEPTANCE - COMBINED ACCEPT-ZERO AND CONTROL PROCEDURES |
| BS ISO 37001:2016 | Anti-bribery management systems. Requirements with guidance for use |
| 14/30301637 DC : 0 | BS EN 9117 - AEROSPACE SERIES - DELEGATED PRODUCT RELEASE VERIFICATION |
| BS EN 16457:2014 | Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report |
| ISO/IEC 27031:2011 | Information technology Security techniques Guidelines for information and communication technology readiness for business continuity |
| UNI EN 15221-5 : 2011 | FACILITY MANAGEMENT - PART 5: GUIDANCE ON FACILITY MANAGEMENT PROCESSES |
| PD ISO/TS 22003:2013 | Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems |
| 04/30079743 DC : DRAFT APR 2004 | ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| 17/30329441 DC : 0 | BS EN 17141 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL |
| BS ISO 14050:2002 | Environmental management. Vocabulary |
| BS IEC 61112:1992 | Blankets of insulating material for electrical purposes |
| I.S. EN ISO 11607-2:2017 & LC:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006, INCLUDING AMD 1:2014) |
| CSA ISO 10012 : 2003 : R2013 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| PD ISO/IEC Guide 53:2005 | Conformity assessment. Guidance on the use of an organization\'s quality management system in product certification |
| CSA ISO 5832-3 : 0 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 3: WROUGHT TITANIUM 6-ALUMINIUM 4-VANDIUM ALLOY |
| BS 6002-5(2011) : 2011 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS |
| IEC TS 61850-2:2003 | Communication networks and systems in substations - Part 2: Glossary |
| BS EN 60896-22:2004 | Stationary lead-acid batteries Valve regulated types. Requirements |
| BS ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| CSA ISO/IEC 12207 : 2009 : R2014 | SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| BS ISO 28592:2017 | Double sampling plans by attributes with minimal sample sizes, indexed by producer\'s risk quality (PRQ) and consumer\'s risk quality (CRQ) |
| INCITS/ISO TS 19159-1 : 2015 | GEOGRAPHIC INFORMATION - CALIBRATION AND VALIDATION OF REMOTE SENSING IMAGERY SENSORS AND DATA - PART 1: OPTICAL SENSORS |
| BS ISO 14004 : 2004 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
| CSA ISO TR 14969 : 2005 : R2010 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
| BS ISO 2230:2002 | Rubber products. Guidelines for storage |
| CSA ISO 10005 : 2005 : R2010 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| 17/30334569 DC : 0 | BS ISO 14080 - GREENHOUSE GAS MANAGEMENT AND RELATED ACTIVITIES - FRAMEWORK AND PRINCIPLES FOR METHODOLOGIES ON CLIMATE ACTIONS |
| I.S. CEN TS 15224:2006 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9001:2000 |
| CSA ISO 10005 : 2005 : R2015 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| ISO 19443:2018 | Quality management systems — Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) |
| I.S. EN 61481:2001 | LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| 04/30107387 DC : DRAFT JUN 2004 | ISO/IEC GUIDE 53 - CONFORMITY ASSESSMENT - GUIDANCE ON THE USE OF AN ORGANIZATION'S QUALITY MANAGEMENT SYSTEM IN PRODUCT CERTIFICATION |
| CSA ISO/IEC TR 24748-2 : 2013 : R2017 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE MANAGEMENT - PART 2: GUIDE TO THE APPLICATION OF ISO/IEC 15288 (SYSTEM LIFE CYCLE PROCESSES) |
| IPC 1401 : 2017 | SUPPLY CHAIN SOCIAL RESPONSIBILITY MANAGEMENT SYSTEM GUIDANCE |
| BS EN ISO 11607-2 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| CSA ISO 9004 : 2009 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| BS 8010-3:1993 | Code of practice for pipelines Pipelines subsea: design, construction and installation |
| CEI UNI EN 12966-2/Ab:2020-02 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 2: INITIAL TYPE TESTING |
| API 2MOP : 2010 : R2015 | MARINE OPERATIONS |
| BS EN ISO 19011:2011 | Guidelines for auditing management systems |
| BS EN 3685:2008 | Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1100 MPa/650 °C. Technical specification |
| PREN 50239 : DRAFT 2016 | RAILWAY APPLICATIONS - RADIO REMOTE CONTROL SYSTEM OF TRACTION VEHICLE FOR SHUNTING TRAFFIC |
| CSA ISO/IEC TR 24748-2 : 2013 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE MANAGEMENT - PART 2: GUIDE TO THE APPLICATION OF ISO/IEC 15288 (SYSTEM LIFE CYCLE PROCESSES) |
| 02/202972 DC : 0 | IEC 60832-1. ED.2 - LIVE WORKING - INSULATING STICKS AND ATTACHABLE UNIVERSAL DEVICES (FITTINGS) - PART 1: INSULATING STICKS WITH PERMANENTLY ATTACHED FITTINGS |
| EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| AQAP 2110 : 2016 | NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN, DEVELOPMENT AND PRODUCTION |
| 09/30176666 DC : 0 | BS EN 62079 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION |
| CSA O452 SERIES : 0 | DESIGN RATED OSB |
| BS EN 61249-4-11:2005 | Materials for printed boards and other interconnecting structures Sectional specification set for prepreg materials, unclad. Non-halogenated epoxide woven E-glass prepeg of defined flammability |
| UNE-ISO/IEC 17021-3:2018 | Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 3: Competence requirements for auditing and certification of quality management systems |
| CEI EN 82079-1 : 2013 | PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS |
| 99/200855 DC : DRAFT JAN 1999 | IEC 61748 - MANUFACTURING LINE APPROVAL FOR MCM (QML) |
| ISO 24516-1:2016 | Guidelines for the management of assets of water supply and wastewater systems — Part 1: Drinking water distribution networks |
| 05/30081246 DC : DRAFT JUN 2005 | BS ISO/IEC 25030 - SOFTWARE ENGINEERING - SOFTWARE QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - QUALITY REQUIREMENTS |
| 04/30115437 DC : 0 | ISO 5598 - FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
| I.S. EN ISO 16904:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS (ISO 16904:2016) |
| BS ISO 10007:2017 | Quality management. Guidelines for configuration management |
| CSA ISO/IEC 15288 : 2009 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEM LIFE CYCLE PROCESSES |
| BS 5750-0.2(1987) : 1987 | QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS |
| XP PREN 9110 : 2004 XP | AEROSPACE SERIES - QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE APPLICABLE TO MAINTENANCE ORGANIZATIONS |
| UNI EN 13670 : 2010 | EXECUTION OF CONCRETE STRUCTURES |
| BS 7229-1(1991) : AMD 7922 | GUIDE TO QUALITY SYSTEMS AUDITING - AUDITING |
| BS ISO 20683-2:2004 | Aircraft ground equipment. Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear Regional aircraft |
| CAN/CSA-ISO 14025-07 (R2017) | Environmental Labels and Declarations - Type III Environmental Declarations - Principles and Procedures (Adopted ISO 14025:2006, first edition, 2006-07-01) |
| UNE-EN 62402:2011 | Obsolescence management - Application guide |
| ANSI/AWWA B112 : 2015 | MICROFILTRATION AND ULTRAFILTRATION MEMBRANE SYSTEMS |
| CSA ISO 14971 : 2007 : R2017 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| I.S. EN 61249-2-6:2005/AC:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| CSA ISO 5832-5 : 0 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 5: WROUGHT COBALT-CHROMIUM-TUNGSTEN-NICKEL ALLOY |
| GOST R ISO 13485 : 2004 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - SYSTEM REQUIREMENTS FOR REGULATORY PURPOSES |
| CAN/CSA-ISO/IEC TR 20000-12:18 | Information technology — Service management — Part 12: Guidance on the relationship between ISO/IEC 20000-1:2011 and service management frameworks: CMMI-SVC (Adopted ISO/IEC TR 20000-12:2016, first edition, 2016-10-01) |
| S.R. CEN/TS 15718:2011 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS |
| IEC 62430:2009 | Environmentally conscious design for electrical and electronic products |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| CEI UNI 70016 : 2008 | CONFORMITY ASSESSMENT CODE OF GOOD PRACTICE |
| PREN 9146 : DRAFT 2017 | FOREIGN OBJECT DAMAGE (FOD) PREVENTION PROGRAM - REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE ORGANIZATIONS |
| CSA ISO 9004 : 2009 : R2015 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| DIN EN 16310:2013-05 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES |
| PREN 9117 : DRAFT 2016 | AEROSPACE SERIES - DELEGATED PRODUCT RELEASE VERIFICATION |
| CSA ISO TR 10013 : 2001 | GUIDELINES FOR QUALITY MANAGEMENT SYSTEM DOCUMENTATION |
| CSA ISO 10005 : 2005 : R2010 : FR | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR QUALITY PLANS |
| ISO/TS 18667:2018 | Space systems — Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management |
| CSA ISO 19901-6 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS |
| CSA ISO/IEC 15504-1 : 2005 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 1: CONCEPTS AND VOCABULARY |
| ASTM D 5486/D5486M : 2006 : R2012 | Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| PREN 9104-003 : 200P2 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 003: REQUIREMENTS FOR AEROSPACE QUALITY MANAGEMENT SYSTEM (AQMS) - AUDITOR TRAINING AND QUALIFICATION |
| CSA ISO/IEC 15504-1 : 2005 : R2015 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 1: CONCEPTS AND VOCABULARY |
| UNI ISO/TR 8550-1 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 1: ACCEPTANCE SAMPLING |
| PREN 9103 : 200P2 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - VARIATION MANAGEMENT OF KEY CHARACTERISTICS |
| CSA ISO/IEC 15504-1 : 2005 : R2010 | INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - PART 1: CONCEPTS AND VOCABULARY |
| DIN EN ISO 12696:2016-07 (Draft) | CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016) |
| I.S. EN 16263-1:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 1: TERMINOLOGY |
| ISO 10794:2011 | Space systems Programme management Material, mechanical parts and processes |
| API 7G-2 : 2009 : INC : ERR 1 : 2009 : R2015 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| PREN 13269 : DRAFT 2015 | MAINTENANCE - GUIDELINE ON PREPARATION OF MAINTENANCE CONTRACTS |
| S.R. CEN/TR 16469:2013 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| DIN EN ISO 9004:2009-12 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| PREN 9104-001 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| ISO/IEC 30105-4:2016 | Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 4: Terms and concepts |
| CEI UNI ISO/IEC 12207 : 2013 | SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
| API 14B RUSSIAN : 2005 | DESIGN, INSTALLATION, REPAIR AND OPERATION OF SUBSURFACE SAFETY VALVE SYSTEMS |
| PREN 12764 : DRAFT 2014 | SANITARY APPLIANCES - SPECIFICATION FOR WHIRLPOOL BATHS |
| API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
| CEI EN 62309 : 2005 | DEPENDABILITY OF PRODUCTS CONTAINING REUSED PARTS - REQUIREMENTS FOR FUNCTIONALITY AND TESTS |
| I.S. EN 50397-2:2009 | COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA |
| I.S. ISO GUIDE 73:2009 | RISK MANAGEMENT - VOCABULARY |
| SAE AS 9003 : 2012 | INSPECTION AND TEST QUALITY SYSTEMS, REQUIREMENTS FOR AVIATION, SPACE, AND DEFENSE ORGANIZATIONS |
| CSA C22.2 No. 60601-1-10 : 2009 : INC : AMD 1 : 2014 : R201400 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| UNI CEI ISO/IEC TS 17022 : 2013 | CONFORMITY ASSESSMENT - REQUIREMENTS AND RECOMMENDATIONS FOR CONTENT OF A THIRD-PARTY AUDIT REPORT ON MANAGEMENT SYSTEMS |
| CEN/TS 15511:2008 | Postal services - Quality of service - Information available on postal services |
| CAN/CSA-ISO IWA 18:17 | Framework for integrated community-based life-long health and care services in aged societies (Adopted ISO International Workshop Agreement 18:2016, first edition, 2016-06-15) |
| ISO/TS 10004:2010 | Quality management Customer satisfaction Guidelines for monitoring and measuring |
| NF ISO 20683-1 : 2005 | AIRCRAFT GROUND EQUIPMENT - DESIGN, TEST AND MAINTENANCE FOR TOWBARLESS TOWING VEHICLES (TLTV) INTERFACED WITH NOSE-LANDING GEAR - PART 1: MAIN-LINE AIRCRAFT |
| I.S. EN ISO 41011:2018 | FACILITY MANAGEMENT - VOCABULARY (ISO 41011:2017) |
| UNE-EN 61508-2:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| BS EN ISO 22300:2014 | Societal security. Terminology |
| I.S. ISO 45001:2018 | OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| DIN EN ISO 11737-1:2009-09 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
| UNE 179002:2018 | Health services. Quality management system for health care transport organization. |
| I.S. ISO 10019:2005 | GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES |
| UNI EN ISO 11240 : 2012 | HEALTH INFORMATICS - IDENTIFICATION OF MEDICINAL PRODUCTS - DATA ELEMENTS AND STRUCTURES FOR THE UNIQUE IDENTIFICATION AND EXCHANGE OF UNITS OF MEASUREMENT |
| IEEE/ISO/IEC 15288-2015 | ISO/IEC/IEEE International Standard - Systems and software engineering -- System life cycle processes |
| I.S. EN ISO 9606-1:2017 | QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
| ISO 3951-4:2011 | Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels |
| S.R. ISO TS 16949:2006 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| UNI CEI EN ISO/IEC 17020 : 2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
| I.S. EN ISO 9004:2009 | QUALITY MANAGEMENT - QUALITY OF AN ORGANIZATION - GUIDANCE TO ACHIEVE SUSTAINED SUCCESS (ISO 9004:2018) |
| S.R. CEN/TS 1555-7:2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| UNE-EN 61230:2011 | Live working - Portable equipment for earthing or earthing and short-circuiting |
| S.R. CWA 15899:2008 | STANDARDIZATION OF AN INNOVATION CAPABILITY RATING FOR SMES |
| BS EN 60896-21:2004 | Stationary lead-acid batteries Valve regulated types. Methods of test |
| S.R. CWA 15992:2009 | HARMONIZATION OF DATA INTERCHANGE IN TOURISM |
| IEEE 24748-1-2011 | IEEE Guide--Adoption of ISO/IEC TR 24748-1:2010 Systems and Software Engineering--Life Cycle Management--Part 1: Guide for Life Cycle Management |
| S.R. ISO/TR 22869:2006 | MEDICAL LABORATORIES - GUIDANCE ON LABORATORY IMPLEMENTATION OF ISO 15189: 2003 |
| ISO 6707-3:2017 | Buildings and civil engineering works — Vocabulary — Part 3: Sustainability terms |
| S.R. CEN/CLC/ISO/IEC/TS 17021-3:2016 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS - PART 3: COMPETENCE REQUIREMENTS FOR AUDITING AND CERTIFICATION OF QUALITY MANAGEMENT SYSTEMS (ISO/IEC/TS 17021-3:2013) |
| ISO 14621-1:2003 | Space systems Electrical, electronic and electromechanical (EEE) parts Part 1: Parts management |
| PREN 16602-80 : DRAFT 2016 | SPACE PRODUCT ASSURANCE - SOFTWARE PRODUCT ASSURANCE |
| I.S. EN 61249-2-40:2013 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-40: REINFORCED BASE MATERIALS CLAD AND UNCLAD - HIGH PERFORMANCE, NONHALOGENATED EPOXIDE WOVEN E-GLASS LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY (IEC 61249-2-40:2012 (EQV)) |
| BS IEC 82304-1 : 2016 | HEALTH SOFTWARE - PART 1: GENERAL REQUIREMENTS FOR PRODUCT SAFETY |
| I.S. EN 61192-5:2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
| IEEE 24748-2-2012 | IEEE Guide--Adoption of ISO/IEC TR 24748-2:2011 Systems and Software Engineering-- Life Cycle Management-- Part 2: Guide to the Application of ISO/IEC 15288 (System Life Cycle Processes) |
| ISO 9004:2018 | Quality management — Quality of an organization — Guidance to achieve sustained success |
| I.S. EN ISO 14044:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006) |
| I.S. EN 15221-3:2011 | FACILITY MANAGEMENT - PART 3: GUIDANCE ON QUALITY IN FACILITY MANAGEMENT |
| ISO/TR 22514-4:2007 | Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
| ISO 17100:2015 | Translation services Requirements for translation services |
| I.S. EN 61249-2-1:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-1: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - PHENOLIC CELLULOSE PAPER REINFORCED LAMINATED SHEETS, ECONOMIC GRADE, COPPER CLAD |
| CEI EN 50491-4-1 : 2014 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) |
| CEI EN 61249-2-36 : 2010 | MATERIAUX POUR CIRCUITS IMPRIMES ET AUTRES STRUCTURES D'INTERCONNEXION - PARTIE 2-36: MATERIAUX DE BASE RENFORCES, PLAQUES ET NON PLAQUES - FEUILLES STRATIFIEES EN TISSU DE VERRE DE TYPE E EPOXYDE, PLAQUEES CUIVRE, D'INFLAMMABILITE DEFINIE (ESSAI DE COMBUSTION VERTICALE) POUR LES ASSEMBLAGES SANS PLOMB |
| I.S. EN 61249-4-5:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| CEI EN 61249-4-18 : 2014 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-18: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD (FOR THE MANUFACTURE OF MULTILAYER BOARDS) - HIGH PERFORMANCE EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST) FOR LEAD-FREE ASSEMBLY |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| S.R. ISO/TS 9002:2016 | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2015 |
| I.S. EN ISO 10407-2:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| CEI EN 61249-4-5 : 2006 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-5: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - POLYIMIDE, MODIFIED OR UNMODIFIED, WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| I.S. CWA 14172-7:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 7: CRYPTOGRAPHIC MODULES USED BY CERTIFICATION SERVICE PROVIDERS FOR SIGNING OPERATIONS AND KEY GENERATION SERVICES |
| I.S. EN 16310:2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR BUILDINGS, INFRASTRUCTURE AND INDUSTRIAL FACILITIES |
| ISO/TS 22391-7:2011 | Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 7: Guidance for the assessment of conformity |
| UNE-EN 15234-1:2011 | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
| I.S. EN ISO 11240:2012 | HEALTH INFORMATICS - IDENTIFICATION OF MEDICINAL PRODUCTS - DATA ELEMENTS AND STRUCTURES FOR THE UNIQUE IDENTIFICATION AND EXCHANGE OF UNITS OF MEASUREMENT (ISO 11240:2012) |
| I.S. EN 15213-4:2013 | INTELLIGENT TRANSPORT SYSTEMS - AFTER-THEFT SYSTEMS FOR THE RECOVERY OF STOLEN VEHICLES - PART 4: INTERFACE AND SYSTEM REQUIREMENTS IN TERMS OF LONG RANGE COMMUNICATION SYSTEM |
| UNE-ISO 13009:2016 | Tourism and related services. Requirements and recommendations for beach operation |
| I.S. EN CWA 14172-5:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 5: SECURE SIGNATURE CREATION DEVICES |
| I.S. EN 60812:2006 | ANALYSIS TECHNIQUES FOR SYSTEM RELIABILITY - PROCEDURE FOR FAILURE MODE AND EFFECTS ANALYSIS (FMEA) |
| NF EN 61249-2-35 : 2009 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-35: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - MODIFIED EPOXIDE WOVEN E-GLASS LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| ISO 11620:2014 | Information and documentation — Library performance indicators |
| BS EN 62304 : 2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
| ISO 3999:2004 | Radiation protection — Apparatus for industrial gamma radiography — Specifications for performance, design and tests |
| UNI ISO 10004 : 2013 | QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR MONITORING AND MEASURING |
| I.S. EN ISO 12696:2016 | CATHODIC PROTECTION OF STEEL IN CONCRETE (ISO 12696:2016) |
| ISO 12308:2017 | Plain bearings — Quality assurance of sample types — Definitions, applications and testing |
| DIN EN ISO 50001:2011-12 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE (ISO 50001:2011) |
| ISO/IEC 26702:2007 | Systems engineering Application and management of the systems engineering process |
| ISO 11133:2014 | Microbiology of food, animal feed and water — Preparation, production, storage and performance testing of culture media |
| BS ISO 7504:2015 | Gas analysis. Vocabulary |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| NF EN ISO 9004 : 2009-12 | MANAGING FOR THE SUSTAINED SUCCESS OF AN ORGANIZATION - A QUALITY MANAGEMENT APPROACH |
| ISO/TS 17582:2014 | Quality management systems Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government |
| ISO 13448-1:2005 | Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach |
| BS EN 16114:2011 | Management consultancy services |
| ISO/TS 19159-1:2014 | Geographic information Calibration and validation of remote sensing imagery sensors and data Part 1: Optical sensors |
| ISO 20683-1:2016 | Aircraft ground equipment Nose gear towbarless towing vehicle (TLTV) Design, testing and maintenance requirements Part 1: Main line aircraft |
| BS EN ISO 50001:2011 | Energy management systems. Requirements with guidance for use |
| UNE-EN ISO 14065:2015 | Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| UNE-EN 60079-19:2011 | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation |
| DD CEN ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB) Guidance for the assessment of conformity |
| I.S. EN 61513:2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS (IEC 61513:2011 (EQV)) |
| ASTM E 2093 : 2012 | Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization |
| ISO 50007:2017 | Energy services Guidelines for the assessment and improvement of the energy service to users |
| ISO 28592:2017 | Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ) |
| ISO 10381-2:2002 | Soil quality Sampling Part 2: Guidance on sampling techniques |
| ISO/IEC Guide 60:2004 | Conformity assessment Code of good practice |
| ISO 10464:2004 | Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing |
| AQAP 2310 : 2017 | NATO QUALITY ASSURANCE REQUIREMENTS FOR AVIATION, SPACE AND DEFENCE SUPPLIERS |
| UNE-EN 9101:2016 | Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations |
| ISO/PAS 28002:2010 | Security management systems for the supply chain - Development of resilience in the supply chain - Requirements with guidance for use |
| XP ISO/TS 9002 : 2017 XP | QUALITY MANAGEMENT SYSTEMS - GUIDELINES FOR THE APPLICATION OF ISO 9001:2015 |
| S.R. CEN ISO TS 29001:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| UNE-EN ISO 19011:2012 | Guidelines for auditing management systems (ISO 19011:2011) |
| ISO 18400-106:2017 | Soil quality — Sampling — Part 106: Quality control and quality assurance |
| UNI CEI EN ISO/IEC 17050-1 : 2010 | CONFORMITY ASSESSMENT - SUPPLIER'S DECLARATION OF CONFORMITY - PART 1: GENERAL REQUIREMENTS |
| ISO/IEC/IEEE 29148:2011 | Systems and software engineering Life cycle processes Requirements engineering |
| ISO/TS 21619:2018 | Geometrical product specifications (GPS) — Types of documents with GPS |
| 15/30317877 DC : 0 | BS EN 16848 - BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET |
| CSA ISO 9004-3 : 1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS |
| BS EN ISO 11607-1 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| ISO 20400:2017 | Sustainable procurement — Guidance |
| AEP-59 : 2009 | APPLICATION PROCESS FOR OPTIMUM PAINT AND COATINGS SYSTEMS' PERFORMANCE |
| DIN EN 15331:2011-11 | Criteria for design, management and control of maintenance services for buildings |
| CAN/CSA-C22.2 NO. 61508-2:17 | Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (Adopted IEC 61508-2:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 2 : Exigences pour les systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité (norme IEC 61508-2:2010 adoptee, deuxième édition, 2010-04, avec exigences propres au Canada) |
| SAE AS 9102 : 2014 | AEROSPACE FIRST ARTICLE INSPECTION REQUIREMENT |
| UNI EN ISO 12967-3 : 2011 | HEALTH INFORMATICS - SERVICE ARCHITECTURE - PART 3: COMPUTATIONAL VIEWPOINT |
| UNI EN ISO 11607-2 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| I.S. EN 9104-001:2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| ISO/IEC TR 24748-1:2010 | Systems and software engineering Life cycle management Part 1: Guide for life cycle management |
| UNI EN 9104-001 : 2013 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 001: REQUIREMENTS FOR AVIATION, SPACE, AND DEFENCE QUALITY MANAGEMENT SYSTEM CERTIFICATION PROGRAMS |
| UNI ISO 26000 : 2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| CSA ISO/IEC TS 24748-1 : 2018 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE MANAGEMENT - PART 1: GUIDELINES FOR LIFE CYCLE MANAGEMENT |
| NF EN 9104-002 : 2017 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - PART 002: REQUIREMENTS FOR OVERSIGHT OF AEROSPACE QUALITY MANAGEMENT SYSTEM REGISTRATION/CERTIFICATION PROGRAMS |
| CSA ISO 7206-2 : 0 | IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP JOINT PROSTHESES - PART 2: ARTICULATING SURFACES MADE OF METALLIC, CERAMIC AND PLASTICS MATERIALS |
| UNI CEI EN ISO/IEC 80079-34 : 2012 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| BS EN ISO 20815:2010 | Petroleum, petrochemical and natural gas industries. Production assurance and reliability management |
| I.S. EN 62429:2008 | RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS |
| BS EN 14428 : 2015 | SHOWER ENCLOSURES - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| ISO/IEC TS 33052:2016 | Information technology — Process reference model (PRM) for information security management |
| ISO 22514-1:2014 | Statistical methods in process management — Capability and performance — Part 1: General principles and concepts |
| UNE-EN 50491-4-1:2013 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| UNE-EN ISO 12967-1:2012 | Health informatics - Service architecture - Part 1: Enterprise viewpoint (ISO 12967-1:2009) |
| ASTM E 2077 : 2000 : R2005 | Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
| BIS IS 13774 : 2014 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| CEI EN 61249-2-8 : 2004 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-8: REINFORCED BASE MATERIALS CLAD AND UNCLAD MODIFIED BROMINATED EPOXIDE WOVEN FIBERGLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| CLC/TR 50674:2018 | Guidelines for the verification of household appliances under energy labelling and eco design |
| PREN ISO 16559 : DRAFT 2013 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO/DIS 16559:2013) |
| CSA CEI/IEC 1258 : 1998 | GUIDELINES FOR THE DEVELOPMENT AND USE OF MEDICAL ELECTRICAL EQUIPMENT EDUCATIONAL MATERIALS |
| UNI EN ISO 14025 : 2010 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| UNI EN ISO 10407-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
| CSA ISO 5832-6 : 0 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 6: WROUGHT COBALT-NICKEL-CHROMIUM-MOLYBDENUM ALLOY |
| UNE-EN 13060:2015 | Small steam sterilizers |
| UNI EN 16214-1 : 2012 | SUSTAINABILITY CRITERIA FOR THE PRODUCTION OF BIOFUELS AND BIOLIQUIDS FOR ENERGY APPLICATIONS - PRINCIPLES, CRITERIA, INDICATORS AND VERIFIERS - PART 1: TERMINOLOGY |
| UNE-EN 16323:2014 | Glossary of wastewater engineering terms |
| UNE-ISO 22006:2013 | Quality management systems -- Guidelines for the application of ISO 9001:2008 to crop production. |
| SAE AMS 2950/1 : 2008(R2019) | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 82079-1:2015 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| ISO 22745-2:2010 | Industrial automation systems and integration Open technical dictionaries and their application to master data Part 2: Vocabulary |
| ISO 15859-3:2004 | Space systems Fluid characteristics, sampling and test methods Part 3: Nitrogen |
| ISO/IEC/IEEE 15288:2015 | Systems and software engineering — System life cycle processes |
| DIN EN 14726 E : 2005 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| BS EN 16844 : 2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS |
| ISO/IEC 17011:2017 | Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies |
| EN 9115:2013 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) |
| ISO/TS 22559-4:2011 | Safety requirements for lifts (elevators) — Part 4: Global conformity assessment procedures (GCAP) — Certification and accreditation requirements |
| EN ISO 17664:2017 | Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices (ISO 17664:2017) |
| I.S. EN 16114:2011 | MANAGEMENT CONSULTANCY SERVICES |
| EN ISO 19258:2011 | Soil quality - Guidance on the determination of background values (ISO 19258:2005) |
| EN ISO 80601-2-56:2017 | Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO 80601-2-56:2017) |
| DIN EN 16848:2015-04 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| ASTM E 2363 : 2014 : REDLINE | Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry |
| ISO 19157:2013 | Geographic information — Data quality |
| ASTM E 2165 : 2001 | Standard Practice for Establishing an Uncertainty Budget for the Chemical Analysis of Metals, Ores, and Related Materials (Withdrawn 2007) |
| ASTM E 2077 : 2000 | Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data |
| I.S. EN 60300-3-1:2004 | DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY |
| SAE J 2911 : 2017 | PROCEDURE FOR CERTIFICATION THAT REQUIREMENTS FOR MOBILE AIR CONDITIONING SYSTEM COMPONENTS, SERVICE EQUIPMENT, AND SERVICE TECHNICIAN TRAINING MEET SAE J STANDARDS |
| EN ISO/IEC 17000:2004 | Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004) |
| EN ISO 15195:2003 | Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003) |
| ISO/TS 18683:2015 | Guidelines for systems and installations for supply of LNG as fuel to ships |
| ISO 55002:2014 | Asset management Management systems Guidelines for the application of ISO 55001 |
| BS EN 9110:2015 | Quality Management Systems. Requirements for Aviation Maintenance Organizations |
| ISO 13009:2015 | Tourism and related services Requirements and recommendations for beach operation |
| I.S. EN ISO/IEC 19796-1:2009 | INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH |
| ASTM E 2513 : 2007 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| IEC 60748-23-1:2002 | Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| ISO/IEC TR 24748-2:2011 | Systems and software engineering Life cycle management Part 2: Guide to the application of ISO/IEC 15288 (System life cycle processes) |
| DIN EN ISO 14044:2006-10 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006) |
| I.S. EN 61249-2-18:2002 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-18: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYESTER NON-WOVEN FIBREGLASS REINFORCED LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| IWA 2:2007 | Quality management systems Guidelines for the application of ISO 9001:2000 in education |
| ISO/TS 13131:2014 | Health informatics Telehealth services Quality planning guidelines |
| I.S. EN 61249-4-2:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 4-2: SECTIONAL SPECIFICATION SET FOR PREPREG MATERIALS, UNCLAD - MULTIFUNCTIONAL EPOXIDE WOVEN E-GLASS PREPREG OF DEFINED FLAMMABILITY |
| ISO/TR 21932:2013 | Sustainability in buildings and civil engineering works A review of terminology |
| ISO/IEC 16350:2015 | Information technology Systems and software engineering Application management |
| I.S. EN 15234-1:2011 | SOLID BIOFUELS - FUEL QUALITY ASSURANCE - PART 1: GENERAL REQUIREMENTS |
| IEC TR 62380:2004 | Reliability data handbook - Universal model for reliability prediction of electronics components, PCBs and equipment |
| ISO 11135:2014 | Sterilization of health-care products Ethylene oxide Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 16363:2012 | Space data and information transfer systems — Audit and certification of trustworthy digital repositories |
| ISO 7870-4:2011 | Control charts Part 4: Cumulative sum charts |
| ISO 16439:2014 | Information and documentation Methods and procedures for assessing the impact of libraries |
| I.S. EN 61249-2-21:2004 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-21: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - NON-HALOGENATED EPOXIDE WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| ISO/IEC TR 24748-3:2011 | Systems and software engineering Life cycle management Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes) |
| ISO/IEC Guide 63:2012 | Guide to the development and inclusion of safety aspects in International Standards for medical devices |
| I.S. EN ISO 9241-420:2011 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 420: SELECTION OF PHYSICAL INPUT DEVICES |
| I.S. EN 60300-3-16:2008 | DEPENDABILITY MANAGEMENT - PART 3-16: APPLICATION GUIDE - GUIDELINES FOR SPECIFICATION OF MAINTENANCE SUPPORT SERVICES |
| I.S. EN ISO 19901-6:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 6: MARINE OPERATIONS (ISO 19901-6:2009) |
| IEC 62282-4-102:2017 | Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods |
| I.S. EN 15357:2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| IEC TS 62600-2:2016 | Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems |
| I.S. CWA 14172-4:2004 | EESSI CONFORMITY ASSESSMENT GUIDANCE - PART 4: SIGNATURE CREATION APPLICATIONS AND GENERAL GUIDELINES FOR ELECTRONIC SIGNATURE VERIFICATION |
| I.S. EN 62366:2009 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
| ISO/TS 22003:2013 | Food safety management systems Requirements for bodies providing audit and certification of food safety management systems |
| S.R. CEN ISO TS 15877-7:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| I.S. EN 50069:1991 | WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| I.S. CEN TS 15357:2006 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| I.S. EN 60300-3-14:2004 | DEPENDABILITY MANAGEMENT - PART 3-14: APPLICATION GUIDE - MAINTENANCE AND MAINTENANCE SUPPORT |
| I.S. EN 61190-1-1:2002 | ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-1: REQUIREMENTS FOR SOLDERING FLUXES FOR HIGH-QUALITY INTERCONNECTIONS IN ELECTRONICS ASSEMBLY |
| I.S. EN 60896-22:2004 | STATIONARY LEAD-ACID BATTERIES - PART 22: VALVE REGULATED TYPES - REQUIREMENTS |
| I.S. EN ISO/IEC 17021:2011 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES PROVIDING AUDIT AND CERTIFICATION OF MANAGEMENT SYSTEMS |
| I.S. EN 61249-2-11:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-11: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYIMIDE, BROMINATED EPOXIDE MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| IEC 62304:2006+AMD1:2015 CSV | Medical device software - Software life cycle processes |
| API SPEC Q2 : 2011+ADD 1 : 2016 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SERVICE SUPPLY ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| EN ISO 17078-2:2007/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| EN 50128:2011/AC:2014 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
| DIN EN ISO 9001:2015-11 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
| EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
| EN 61987-10:2009/AC:2011 | INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 10: LISTS OF PROPERTIES (LOPS) FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL FOR ELECTRONIC DATA EXCHANGE - FUNDAMENTALS |
| EN ISO 17078-1:2004/A1:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| DIN EN ISO 3834-1:2006-03 | Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) |
| DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
| DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| DIN EN 12952-5:2012-01 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| DIN EN 13260:2011-01 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| EN ISO 16106:2006 | PACKAGING - TRANSPORT PACKAGES FOR DANGEROUS GOODS - DANGEROUS GOODS PACKAGINGS, INTERMEDIATE BULK CONTAINERS (IBCS) AND LARGE PACKAGINGS - GUIDELINES FOR THE APPLICATION OF ISO 9001 |
| DIN EN 599-1:2014-03 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 1: SPECIFICATION ACCORDING TO USE CLASS |
| DIN EN 1337-6 E : 2004 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| DIN EN ISO 11737-2:2010-04 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| DIN EN 14065:2016-08 | TEXTILES - LAUNDRY PROCESSED TEXTILES - BIOCONTAMINATION CONTROL SYSTEM |
| UNE-EN ISO 11737-2:2010 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| IEC 62258-1:2009 | Semiconductor die products - Part 1: Procurement and use |
| UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| BS EN 592:2002 | Instructions for use for in vitro diagnostic instruments for self-testing |
| BS EN 1422:2014 | Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods |
| ISO 9004-2:1991 | Quality management and quality system elements Part 2: Guidelines for services |
| ISO 12967-1:2009 | Health informatics Service architecture Part 1: Enterprise viewpoint |
| ISO 16559:2014 | Solid biofuels Terminology, definitions and descriptions |
| BS EN ISO 17662:2016 | Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities |
| IEC 61243-2:1995+AMD1:1999+AMD2:2002 CSV | Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| BS EN ISO 9001:2015 | Quality management systems. Requirements |
| BS EN 13260 : 2009 | RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - WHEELSETS - PRODUCT REQUIREMENTS |
| IEC 62429:2007 | Reliability growth - Stress testing for early failures in unique complex systems |
| ISO 14698-2:2003 | Cleanrooms and associated controlled environments Biocontamination control Part 2: Evaluation and interpretation of biocontamination data |
| BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
| IEC 82079-1:2012 | Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO/TS 22367:2008 | Medical laboratories Reduction of error through risk management and continual improvement |
| UNE-EN 1330-1:2015 | Non destructive testing - Terminology - Part 1: List of general terms |
| ISO 20252:2012 | Market, opinion and social research Vocabulary and service requirements |
| ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
| BS EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation |
| BS EN 12967-3:2007 | Health informatics. Service architecture Computational viewpoint |
| DIN EN ISO 9875:2013-08 | Ships and marine technology - Marine echo-sounding equipment (ISO 9875:2000 + Cor. 1:2006) (includes Corrigendum :2011) |
| BS EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| IEC 61249-4-18:2013 | Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| ISO 13940:2015 | Health informatics — System of concepts to support continuity of care |
| BS EN 45510-2-9:2008 | Guide for procurement of power station equipment Electrical equipment. Cabling systems |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| ISO 11608-5:2012 | Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| BS EN 12798:2007 | Transport quality management system. Road rail and inland navigation transport. Quality management system requirements to supplement EN ISO 9001 for the transport of dangerous goods, with regard to safety |
| BS EN ISO 10012:2003 | Measurement management systems. Requirements for measurement processes and measuring equipment |
| IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| BS EN 1337-4:2004 | Structural bearings Roller bearings |
| BS EN ISO 11608-1:2015 | Needle-based injection systems for medical use. Requirements and test methods Needle-based injection systems |
| ISO 10011-1:1990 | Guidelines for auditing quality systems Part 1: Auditing |
| BS EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
| ISO 14005:2010 | Environmental management systems Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation |
| BS EN 14588:2010 | Solid biofuels. Terminology, definitions and descriptions |
| BS EN 486:2009 | Aluminium and aluminium alloys. Extrusion ingots. Specifications |
| IEC 61355:1997 | Classification and designation of documents for plants, systems and equipment |
| ISO/TS 11133-1:2009 | Microbiology of food and animal feeding stuffs Guidelines on preparation and production of culture media Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory |
| BS EN 1325-2:2004 | Value management, value analysis, functional analysis vocabulary Value management |
| BS EN 15259:2007 | Air quality. Measurement of stationary source emissions. Requirements for measurement sections and sites and for the measurement objective, plan and report |
| IEC 61249-2-43:2016 | Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| BS EN 12899-5:2007 | Fixed, vertical road traffic signs Initial type testing |
| ISO 19901-6:2009 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations |
| IEC 61249-2-2:2005 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
| DIN EN ISO 11608-3:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
| BS EN ISO 4074:2015 | Natural rubber latex male condoms. Requirements and test methods |
| BS EN 9100:2009 | Quality Management Systems. Requirements for Aviation, Space and Defense Organizations |
| ISO 29990:2010 | Learning services for non-formal education and training Basic requirements for service providers |
| ISO 12967-2:2009 | Health informatics Service architecture Part 2: Information viewpoint |
| BS EN 15079:2015 | Copper and copper alloys. Analysis by spark optical emission spectrometry (S-OES) |
| ISO/IEC 20000-1:2011 | Information technology Service management Part 1: Service management system requirements |
| IEC 61249-4-11:2005 | Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass prepreg of defined flammability |
| DIN EN 15224:2017-05 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
| UNI EN ISO 19902 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
| EN 61192-5 : 2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
| CEN ISO/TS 22367:2010 | Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009) |
| CEN/TS 12200-2:2017 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
| DIN EN ISO 19258:2011-09 | SOIL QUALITY - GUIDANCE ON THE DETERMINATION OF BACKGROUND VALUES (ISO 19258:2005) |
| EN 12507:2005 | Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| EN 61511-2:2017 | Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 |
| DIN EN 14817:2006-08 | Railway applications - Suspension components - Air spring control elements |
| CEN/TR 14585-2:2006 | Corrugated metal hose assemblies for pressure applications - Part 2: Guidance on the use of conformity assessment procedures |
| EN 61249-2-7:2002/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 60966-2-1:2009 | Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies |
| EN 61513:2013 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
| CEI EN 62258-1 : 2011 | SEMICONDUCTOR DIE PRODUCTS - PART 1: PROCUREMENT AND USE |
| CEN/TS 15358:2006 | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
| EN 61249-2-4:2002 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| EN 61249-2-21:2003 | Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| CEN/TS 15359:2006 | Solid recovered fuels - Specifications and classes |
| EN 12967-1:2007 | Health informatics - Service architecture - Part 1: Enterprise viewpoint |
| EN 1325:2014 | Value Management - Vocabulary - Terms and definitions |
| CEN/TS 15331:2005 | Criteria for design, management and control of maintenance services for buildings |
| CEN ISO/TS 17427:2014 | Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014) |
| EN ISO 15883-1:2009/A1:2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006/AMD 1:2014) |
| EN 50237:1997 | Gloves and mitts with mechanical protection for electrical purposes |
| EN 61249-2-6:2003/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-6: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| CEN ISO/TS 29001:2011 | Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001:2010) |
| EN 12952-6:2011 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| EN 61249-2-22:2005 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| EN 61249-4-18 : 2013 | Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly |
| EN 62388:2013/AC:2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE RADAR - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| EN 61249-2-23:2005 | Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| EN ISO/IEC 17065:2012 | Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
| EN 60300-3-14:2004 | Dependability management - Part 3-14: Application guide - Maintenance and maintenance support |
| EN 61249-2-8:2003 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| EN ISO 14065:2013 | Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition (ISO 14065:2013) |
| EN 60300-3-11 : 2009 | DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE |
| DIN EN ISO 14698-2:2004-02 | Cleanrooms and associated controlled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data (ISO 14698-2:2003) |
| EN 61355:1997 | Classification and designation of documents for plants, systems and equipment |
| EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
| EN 61243-2:1997/A2:2002 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| EN 61249-2-41:2010 | Materials for printed boards and other interconnecting structures - Part 2-41: Reinforced base materials clad and unclad - Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 60300-3-1:2004 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| EN 61249-2-38:2009 | Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 62282-3-201:2017 | Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems |
| DIN EN 15161:2007-02 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| EN 62065:2014 | Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results |
| EN 60300-3-16:2008 | Dependability management - Part 3-16: Application guide - Guidelines for specification of maintenance support services |
| EN 62343-2:2014 | Dynamic modules - Part 2: Reliability qualification |
| DIN EN 1325-2:2004-11 | VALUE MANAGEMENT, VALUE ANALYSIS, FUNCTIONAL ANALYSIS VOCABULARY - PART 2: VALUE MANAGEMENT |
| EN 12435 : 2006 | HEALTH INFORMATICS - EXPRESSION OF RESULTS OF MEASUREMENTS IN HEALTH SCIENCES |
| I.S. EN ISO 17078-1:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| DIN EN 14726:2005-12 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| EN 61249-2-42 : 2010 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-42: REINFORCED BASE MATERIALS CLAD AND UNCLAD - BROMINATED EPOXIDE NON-WOVEN/WOVEN E-GLASS REINFORCED LAMINATE SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD FOR LEAD-FREE ASSEMBLY |
| DIN EN 12966-2:2005-07 | ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 2: INITIAL TYPE TESTING |
| EN 50068 : 1991 COR 2007 | WROUGHT STEEL ENCLOSURES FOR GAS FILLED HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| DIN EN 15038:2006-08 | TRANSLATION SERVICES - SERVICE REQUIREMENTS |
| EN 61249-4-1:2008 | Materials for printed boards and other interconnecting structures - Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability |
| DIN EN 15838:2010-02 | CUSTOMER CONTACT CENTRES - REQUIREMENTS FOR SERVICE PROVISION |
| EN 60872-3:2001 | Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 3: Electronic plotting aid (EPA) - Performance requirements - Methods of testing and required test results |
| EN 61249-2-35:2009 | Materials for printed boards and other interconnecting structures - Part 2-35: Reinforced base materials, clad and unclad - Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 60300-2:2004 | Dependability management - Part 2: Guidelines for dependability management |
| DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| DIN EN 450-2:2005-05 | Fly ash for concrete - Part 2: Conformity evaluation |
| CEN/TS 1555-7:2013 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity |
| EN 61249-2-11:2003/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-11: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - POLYIMIDE, BROMINATED EPOXIDE MODIFIED OR UNMODIFIED, WOVEN E-GLASS REINFORCED LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 13486:2001 | Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification |
| EN 60872-1:1998 | Maritime navigation and radiocommunication equipment and systems - Radar plotting aids - Part 1: Automatic radar plotting aids (ARPA) - Methods of testing and required test results |
| EN 61249-2-30:2013 | Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad |
| EN 62347:2007 | Guidance on system dependability specifications |
| EN 50064 : 1989 COR 2007 | WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| EN 62474:2012 | Material declaration for products of and for the electrotechnical industry |
| EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| EN 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations |
| DIN EN ISO 15195:2004-01 | LABORATORY MEDICINE - REQUIREMENTS FOR REFERENCE MEASUREMENT LABORATORIES |
| DIN EN 16001:2009-08 | ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| DIN EN 287-1:2004-05 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| EN 61249-2-36:2009 | Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
| EN 80001-1:2011 | Application of risk management for IT-networks incorporating medical devices - Part 1: Roles, responsibilities and activities |
| EN 13298:2003 | Railway applications - Suspension components - Helical suspension springs, steel |
| EN 61249-4-12:2005 | Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability |
| EN 61249-2-9:2003 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials, clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| DIN EN 14588:2011-01 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| EN 60936-2:1999 | Maritime navigation and radiocommunication equipment and systems - Radar - Part 2: Shipborne radar for high-speed craft (HSC) - Methods of testing and required test results |
| EN 61249-2-40:2013 | Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| DIN EN 14359:2017-09 | GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS |
| EN 61249-2-5:2003/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-5: REINFORCED BASE MATERIALS, CLAD AND UNCLAD - BROMINATED EPOXIDE CELLULOSE PAPER REINFORCED CORE / WOVEN E-GLASS REINFORCED SURFACES LAMINATED SHEETS OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 13282-3:2015 | Hydraulic road binders - Part 3: Conformity evaluation |
| DIN EN 487:2009-11 | Aluminium and aluminium alloys - Rolling ingots - Specifications |
| EN 61340-5-2:2001/corrigendum:2001 | ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE |
| EN 60903 : 2003 COR 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| EN 61249-2-10:2003/corrigendum:2005 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials, clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| DIN EN 15001-2:2010-04 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| EIA 836 CD : B2010(R2015) | CONFIGURATION MANAGEMENT DATA EXCHANGE AND INTEROPERABILITY |
| EN 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| EN 61249-2-2:2005 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
| EN 82045-1:2001 | Document management - Part 1: Principles and methods |
| CEN ISO/TS 14907-1:2015 | Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015) |
| CEN/TR 16469:2013 | Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements |
| EN 60393-1:2009 | Potentiometers for use in electronic equipment - Part 1: Generic specification |
| EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
| EN 62508 : 2010 | GUIDANCE ON HUMAN ASPECTS OF DEPENDABILITY |
| EN 61190-1-1:2002 | Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly |
| EN 61249-4-11:2005 | Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide, woven E-glass prepreg of defined flammability |
| EN 61014 : 2003 | Programmes for reliability growth |
| EN 61249-2-39 : 2013 | Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly |
| EN 50397-2:2009 | Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria |
| EN 61160:2005 | Design review |
| EN 60952-1:2013 | AIRCRAFT BATTERIES - PART 1: GENERAL TEST REQUIREMENTS AND PERFORMANCE LEVELS (IEC 60952-1:2013) |
| ASME B16.33 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| ASME B16.33 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
| ASME B16.4 : 2016 | GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250 |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| UNE-EN 13260:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
| ASME B16.40 : 2013 | MANUALLY OPERATED THERMOPLASTIC GAS SHUTOFFS AND VALVES IN GAS DISTRIBUTION SYSTEMS |
| ASME B16.3 : 2016 | MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300 |
| ASME B16.18 : 2012 | Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br> |
| ASME B16.50 : 2013 | WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
| I.S. EN 13486:2002 | TEMPERATURE RECORDERS AND THERMOMETERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - PERIOD VERIFICATION |
| ASME B16.44:2023 | Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi |
| ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
| ASME B16.51 : 2013 | Copper and Copper Alloy Press-Connect Pressure Fittings |
| ASME B16.23 : 2016 | CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS: DWV |
| ASME B16.44 : 2012 : R2017 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| ASME B16.44 : 2012 | MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
| OVE/ONORM EN 61744 : 2006 | CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS |
| ISO 10001:2007 | Quality management Customer satisfaction Guidelines for codes of conduct for organizations |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| ISO 19011:2011 | Guidelines for auditing management systems |
| ISO 1087-1:2000 | Terminology work Vocabulary Part 1: Theory and application |
| ISO 10015:1999 | Quality management Guidelines for training |
| ISO/IEC 27001:2013 | Information technology — Security techniques — Information security management systems — Requirements |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| AS/NZS ISO 19011:2019 | Guidelines for auditing management systems |
| AS ISO 14040:2019 | Environmental management - Life cycle assessment - Principles and framework |
| ISO 31000:2009 | Risk management Principles and guidelines |
| AS ISO 37001:2019 | Anti-bribery management systems - Requirements with guidance for use |
| AS/NZS ISO/IEC 20000.1:2019 | Information technology - Service management Service management system requirements |
| ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| AS ISO 20387:2020 | Biotechnology - Biobanking - General requirements for biobanking |
| SA/SNZ TR ISO 21965:2020 | Information and documentation - Records management in enterprise architecture |
| ISO 10019:2005 | Guidelines for the selection of quality management system consultants and use of their services |
| ISO 10241-2:2012 | Terminological entries in standards — Part 2: Adoption of standardized terminological entries |
| ISO 10004:2012 | Quality management Customer satisfaction Guidelines for monitoring and measuring |
| ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
| ISO 50001:2011 | Energy management systems Requirements with guidance for use |
| AS ISO 22367:2021 | Medical laboratories - Application of risk management to medical laboratories |
| AS/NZS ISO/IEC 20000.10:2019 | Information technology - Service management Concepts and vocabulary |
| AS ISO 22300:2019 | Security and resilience - Vocabulary |
| AS/NZS ISO 19160.3:2020 | Addressing Address data quality |
| ISO 10005:2005 | Quality management systems Guidelines for quality plans |
| ISO 10008:2013 | Quality management — Customer satisfaction — Guidelines for business-to-consumer electronic commerce transactions |
| ISO 10003:2007 | Quality management Customer satisfaction Guidelines for dispute resolution external to organizations |
| AS ISO 55002:2019 | Asset management - Management systems - Guidelines for the application of ISO 55001 |
| ISO 10006:2003 | Quality management systems Guidelines for quality management in projects |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 10018:2012 | Quality management Guidelines on people involvement and competence |
| ISO 3534-2:2006 | Statistics Vocabulary and symbols Part 2: Applied statistics |
| ISO 10002:2014 | Quality management Customer satisfaction Guidelines for complaints handling in organizations |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO/TR 10013:2001 | Guidelines for quality management system documentation |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO/IEC Guide 2:2004 | Standardization and related activities General vocabulary |
| AS ISO 37100:2020 | Sustainable cities and communities - Vocabulary |
| AS/NZS IEC 60812:2020 | Failure modes and effects analysis (FMEA and FMECA) |
| ISO 10241-1:2011 | Terminological entries in standards — Part 1: General requirements and examples of presentation |
| SA HB 13485:2020 | AS ISO 13485:2017 - Medical devices - A practical guide |
| ISO 704:2009 | Terminology work — Principles and methods |
| ISO 10007:2017 | Quality management — Guidelines for configuration management |
| AS ISO 20658:2019 | Medical laboratories - Requirements for collection, transport, receipt, and handling of samples |
| ISO Guide 73:2009 | Risk management — Vocabulary |
| AS ISO/IEC/IEEE 12207:2019 | Systems and software engineering - Software life cycle processes |
£178.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - Spanish
PDF - Spanish
PDF 3 Users - Spanish
PDF 5 Users - Spanish
PDF 9 Users - Spanish
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - Spanish
PDF - Spanish
PDF 3 Users - Spanish
PDF 5 Users - Spanish
PDF 9 Users - Spanish
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.