CEN Guide 414:2017
|
Safety of machinery - Rules for the drafting and presentation of safety standards
|
IEC 60079-1:2014 RLV
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
|
IEC 60079-10:2002
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
|
EN 50053-2 : 1989
|
REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC POWDER SPRAY GUNS WITH AN ENERGY LIMIT OF 5 MJ AND THEIR ASSOCIATED EQUIPMENT
|
EN 14756:2006
|
Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
|
EN 14034-2:2006+A1:2011
|
Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds
|
EN 50053-3 : 1989
|
REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC FLOCK SPRAY GUNS WITH AN ENERGY LIMIT OF 0.24 MJ OR 5MJ AND THEIR ASSOCIATED APPARATUS
|
EN 13445-5 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
|
EN 60079-1:2014
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
|
EN 1710:2005+A1:2008/AC:2010
|
EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
|
EN 13445-6 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON
|
IEC TR 60079-20:1996
|
Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
|
EN 13980:2002
|
Potentially explosive atmospheres - Application of quality systems
|
EN 15188:2007
|
Determination of the spontaneous ignition behaviour of dust accumulations
|
EN 60079-0:2012/A11:2013
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
|
EN 14373:2005
|
Explosion suppression systems
|
EN 60079-15:2010
|
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
|
EN 50053-1 : 1987
|
REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC PAINT SPRAY GUNS WITH AN ENERGY LIMIT OF 0.24 MJ AND THEIR ASSOCIATED APPARATUS
|
EN ISO 14121-1:2007
|
Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
|
EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
|
EN 12874 : 2001
|
FLAME ARRESTERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND LIMITS FOR USE
|
EN 61779-4:2000
|
Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit
|
EN 14034-3:2006+A1:2011
|
Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds
|
IEC 60079-18:2014 RLV
|
Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
|
EN 14797:2006
|
Explosion venting devices
|
EN 13673-2:2005
|
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise
|
EN 13237:2012
|
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
|
EN 50050:2006
|
Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment
|
EN 50017:1998
|
Electrical apparatus for potentially explosive atmospheres - Powder filling "q"
|
EN 14491:2012
|
Dust explosion venting protective systems
|
EN 60079-6:2015
|
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
|
EN 1839:2017
|
Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
|
IEC 61779-2:1998
|
Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
|
EN 13463-6:2005
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b'
|
EN 60079-28:2015
|
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
|
ISO 14121-1:2007
|
Safety of machinery Risk assessment Part 1: Principles
|
IEC 60050-426:2008
|
International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
|
EN 13445-8 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
|
EN 60079-11:2012
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
|
EN 13445-4 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
|
IEC 60079-11:2011
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
|
EN 62305-3:2011
|
Protection against lightning - Part 3: Physical damage to structures and life hazard
|
EN 13463-8:2003
|
Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k'
|
EN 61779-5:2000
|
Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas
|
EN 1127-2:2014
|
Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
|
IEC 61779-4:1998
|
Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit
|
EN ISO 12100-1:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
|
EN 15198:2007
|
Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
|
EN 60079-25:2010/AC:2013
|
EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
|
EN 13673-1:2003
|
Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure
|
IEC 60079-25:2010
|
Explosive atmospheres - Part 25: Intrinsically safe electrical systems
|
EN 13463-2:2004
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr'
|
IEC 60079-6:2015
|
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
|
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements
|
EN 14034-1:2004+A1:2011
|
Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds
|
EN 60079-10:2003
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
|
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
|
EN 50059:1990
|
Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
|
ISO 8421-1:1987
|
Fire protection — Vocabulary — Part 1: General terms and phenomena of fire
|
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
|
EN 62305-2:2012
|
Protection against lightning - Part 2: Risk management
|
IEC 60079-14:2013
|
Explosive atmospheres - Part 14: Electrical installations design, selection and erection
|
IEC 61779-3:1998
|
Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
|
EN 61779-1 : 2000 AMD 11 2004
|
ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
|
EN 50281-2-1 : 98 COR 99
|
Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust
|
EN 61779-2:2000
|
Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
|
EN 60079-14:2014/AC:2016
|
EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
|
ISO 12100-1:2003
|
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
|
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
|
IEC 61779-5:1998
|
Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas
|
EN 61779-3:2000
|
Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
|
IEC 62305-2:2010
|
Protection against lightning - Part 2: Risk management
|
EN 14522:2005
|
Determination of the auto ignition temperature of gases and vapours
|
EN 13463-5:2011
|
Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
|
EN 13463-3:2005
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd'
|
EN 14034-4:2004+A1:2011
|
Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds
|
CEN/TR 15281:2006
|
Guidance on Inerting for the Prevention of Explosions
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
|
IEC 61779-1:1998
|
Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
|
IEC 62305-3:2010
|
Protection against lightning - Part 3: Physical damage to structures and life hazard
|
IEC 60079-15:2010
|
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
|
EN 13821:2002
|
Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures
|
EN 14994:2007
|
Gas explosion venting protective systems
|
CLC/TR 50404:2003
|
Electrostatics - Code of practice for the avoidance of hazards due to static electricity
|
EN 60079-2:2014/AC:2015
|
EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)
|