10/30234625 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
31-07-2013
English
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Survey
6 Designation
7 Testing
8 Mounting of hose fittings
9 Marking
Bibliography
BS EN 14420-1
Committee |
PRI/66/-/5
|
DocumentType |
Draft
|
Pages |
19
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
PREN 14420-1 : DRAFT 2010 | Identical |
EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
EN 13766:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge Specification |
ISO 6801:1983 | Rubber or plastics hoses Determination of volumetric expansion |
EN 14420-7:2013 | Hose fittings with clamp units - Part 7: Cam locking couplings |
EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
EN 1361 : 2004 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
EN 13482:2013 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
EN ISO 7326:2016 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
EN 14420-2:2013 | Hose fittings with clamp units - Part 2: Hose side parts of hose tail |
ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
EN 13765:2010+A1:2015 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN ISO 6802:2008 | Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005) |
EN 26801:1993/A1:2011 | RUBBER OR PLASTICS HOSES - DETERMINATION OF VOLUMETRIC EXPANSION (ISO 6801:1983/AMD 1:2011) |
ISO 6802:2005 | Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
EN 14420-8:2013+A1:2016 | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
EN 1765:2016 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery - Specification |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 28033 : 1993 | RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
EN 28029 : 1993 | PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE REINFORCED - SPECIFICATION |
ISO 9001:2015 | Quality management systems — Requirements |
EN ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) |
EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
EN 14420-6:2013 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
EN 855 : 1996 | PLASTICS HOSES AND HOSE ASSEMBLIES - THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 8029:2014 | Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.