• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

11/30232437 DC : 0

Current
Current

The latest, up-to-date edition.

BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
Available format(s)

Hardcopy , PDF

Language(s)

English

Foreword
1 Modifications throughout the whole document
2 Modifications to the Foreword
3 Modifications to Clause 1, Scope
4 Modifications to Clause 2, Normative references
5 Modification to 3.2, Definitions
6 Modifications to Clause 4, List of significant hazards
7 Modifications to Clause 5, Safety requirements and/or
   measures
8 Modifications to 5.1.1, Safety and reliability of control
   systems
9 Addition of a new Subclause 5.2.1.2, Use of protective
   devices
10 Modification to 5.1.3, Starting
11 Modifications to 5.1.4, Normal stopping
12 Modifications to 5.1.5, Emergency stop
13 Modifications to 5.2.2, Risk of break-up during
   operation
14 Modifications to 5.2.4.1, General
15 Modification to 5.2.4.2, Conditions for all tests
16 Modification to 5.2.4.3, Tests
17 Modification to 5.2.5, Devices to minimise the
   possibility or the effect of ejection
18 Modification to 5.2.7.1, Guarding of the saw blade on
   circular sawing machines for firewood
   with pivoting log carriage
19 Modification to 5.2.7.2, Guarding of the saw
   blade on circular sawing machines for
   firewood with sliding table
20 Modifications to 5.2.7.3.3, Guarding of the saw
   blade below the table during use in the
   saw bench mode
21 Modification to 5.2.7.4, Guarding of drives
22 Modification to 5.3.1, Fire
23 Modification to 5.3.2.2, Noise emission measurement
24 Modification to 5.3.2.3, Declaration
25 Modifications to 5.3.3, Emission of chips, dust
   and gases
26 Modifications to 5.3.4, Electricity
27 Modification to 5.3.9, Heat
28 Modification to 5.3.11, Vibration
29 Modification to 5.3.12, Isolation
30 Modification to 5.3.13, Laser
31 Modification to 5.3.14, Static electricity
32 Modification to 5.3.17, Maintenance
33 Modification to Clause 6, Information for use
34 Modification to 6.1, Warning devices
35 Modification to 6.2.1, Marking of machine
36 Modifications to 6.3, Instruction handbook
37 Modification to Annex F, Saw bench table minimum
   dimensions on dual-purpose circular sawing
   machines for firewood/circular saw benches
38 Addition of a new Annex H, Brake tests
39 Addition of a new Annex I, Impact test method
   for guards
40 Modification to Annex ZA, Relationship between this
   European Standard and the Essential
   Requirements of EU Directive 98/37/EC
41 Modification to Annex ZB, Relationship between
   this European Standard and the Essential
   Requirements of EU Directive 2006/42/EC
42 Modifications to the Bibliography

BS EN 1870-6:2002+A1:2009/FPRA2

Committee
MTE/23
DocumentType
Draft
Pages
25
PublisherName
British Standards Institution
Status
Current

ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
EN 60745-1:2009/A11:2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 60745-2-5:2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
EN 61800-5-2:2017 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
EN 1093-9:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 3746:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
EN 60947-4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
IEC 60745-2-5:2010 Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
IEC 60745-1:2006 Hand-held motor-operated electric tools - Safety - Part 1: General requirements
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
EN 1093-11:2001+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room

View more information
£20.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.