14/30297213 DC : 0

Superseded

View Superseded by

BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS

Available format(s)

Hardcopy , PDF

Superseded date

31-05-2016

Language(s)

English

Publisher

British Standards Institution

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety and environment
5 Jetties and marine facilities
6 Storage and retention systems
7 LNG pumps
8 Vaporisation of LNG
9 Pipe-work
10 Reception/send out of natural gas
11 Boil off recovery and treatment plants
12 Auxiliary circuits and buildings
13 Hazard management
14 Control and monitoring systems
15 Construction, commissioning and turnaround
16 Preservation and corrosion protection
17 Training for operations
18 Pre-operational marine training
Annex A (normative) Thermal radiation threshold values
Annex B (normative) Definitions of reference flow rates
Annex C (informative) Seismic classification
Annex D (normative) Specific requirements for LNG pumps
Annex E (normative) Specific requirements for LNG vaporisers
Annex F (normative) Criteria for the design of pipes
Annex G (informative) Description of the different types
of onshore LNG installations
Annex H (informative) Definition of different types of LNG tanks
Annex J (informative) Frequency ranges
Annex K (informative) Classes of consequence
Annex L (informative) - Levels of risk
Annex M (informative) - Typical process steps of liquefaction
Annex N (informative) - Odourant systems
Bibliography

BS EN 1473.

Committee	GSE/38
DocumentType	Draft
Pages	140
PublisherName	British Standards Institution
Status	Superseded
SupersededBy	BS EN 1473:2016

ISO 9906:2012	Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
IEC 60079-1:2014 RLV	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60364-5-54:2011	Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
EN 13766:2010	Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
IEC 60079-10:2002	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
EN 1514-1:1997	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
EN 60079-26:2015	Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 12560-6:2003	Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
EN 12162:2001+A1:2009	Liquid pumps - Safety requirements - Procedure for hydrostatic testing
CFR 10(PTS0-199) : JAN 87	ENERGY - NUCLEAR REGULATORY COMMISSION
ISO 15664:2001	Acoustics — Noise control design procedures for open plant
NFPA 921 : 2017	GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS
EN 12560-1:2001	Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
EN ISO 10456:2007/AC:2009	BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
EN 12560-3:2001	Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
EN 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
EN 60079-1:2014	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC TR 60079-20:1996	Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus
EN 12560-2:2013	Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
ISO 5199:2002	Technical specifications for centrifugal pumps — Class II
IEC 60079-19:2010+AMD1:2015 CSV	Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
EN 60079-0:2012/A11:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 1759-1:2004	Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN ISO 1461:2009	Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
EN 1474 : 1997	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
IEC 60079-17:2013	Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN 12483:1999	Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests
EN 12065 : 1997	INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - TESTING OF FOAM CONCENTRATES DESIGNED FOR GENERATION OF MEDIUM AND HIGH EXPANSION FOAM AND OF EXTINGUISHING POWDERS USED ON LIQUEFIED NATURAL GAS FIRES
EN 1714:1997/A2:2003	NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS
EN 12560-4:2001	Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
EN 61779-4:2000	Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit
EN 1994-1-1:2004/AC:2009	EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
IEC 60079-18:2014 RLV	Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
EN 823:2013	Thermal insulating products for building applications - Determination of thickness
EN ISO 5199 : 2002	TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
ISO 1461:2009	Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
EN 1050 : 1996	SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 13645:2001	Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t
EN 473:2008	Non-destructive testing - Qualification and certification of NDT personnel - General principles
IEC TR 60079-16:1990	Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses
IEC 60079-5:2015 RLV	Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
EN ISO 13709:2009	Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN 1994-1-2:2005/A1:2014	EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 1991-1-2:2002/AC:2013	EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-2: GENERAL ACTIONS - ACTIONS ON STRUCTURES EXPOSED TO FIRE
NFC 17 100 : 1997	PROTECTION OF STRUCTURES AGAINST LIGHTNING - INSTALLATION OF LIGHTNING PROTECTIVE SYSTEM
API 521 : 2014	PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
ISO 15614-1:2017	Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
IMCA SEL 017 : JAN 2007	INTRODUCTION TO THE INTERNATIONAL SHIP & PORT FACILITY SECURITY CODE (THE ISPS CODE)
IEC 60079-11:2011	Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
ISO 15609-1:2004	Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN ISO 1460 : 1994	METALLIC COATINGS - HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS - GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA
IEC 61779-4:1998	Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit
IEC 60079-27:2008	Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
EN ISO 16903:2015	Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection (ISO 16903:2015)
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
EN 809 : 1998 COR 2010	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 60079-25:2010/AC:2013	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
EN 12308 : 1998	INSTALLATIONS AND EQUIPMENT FOR LNG - SUITABILITY TESTING OF GASKETS DESIGNED FOR FLANGED JOINTS USED ON LNG PIPING
EN 1992-1-2:2004/AC:2008	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
IEC 60079-25:2010	Explosive atmospheres - Part 25: Intrinsically safe electrical systems
ISO 14001:2015	Environmental management systems — Requirements with guidance for use
ISO 12241:2008	Thermal insulation for building equipment and industrial installations Calculation rules
IEC 60079-6:2015	Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
IEC 60079-0:2011	Explosive atmospheres - Part 0: Equipment - General requirements
ISO 10456:2007	Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
EN 10204:2004	Metallic products - Types of inspection documents
EN 60079-10:2003	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
EN ISO 10497:2010	Testing of valves - Fire type-testing requirements (ISO 10497:2010)
IEC 60079-14:2013	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
EN ISO 12241:2008	Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008)
EN ISO 14001:2015	Environmental management systems - Requirements with guidance for use (ISO 14001:2015)
ISO 9001:2015	Quality management systems — Requirements
EN ISO 15609-1:2004	Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN 61779-1 : 2000 AMD 11 2004	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
EN ISO 9906:2012	Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012)
EN 60079-14:2014/AC:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
ISO 13709:2009	Centrifugal pumps for petroleum, petrochemical and natural gas industries
IP 15 : 2015	PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT
ISO 9000:2015	Quality management systems — Fundamentals and vocabulary
EN ISO 28460:2010	Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010)
ISO 10497:2010	Testing of valves — Fire type-testing requirements
EN 60079-17:2014	Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
ISO 1460:1992	Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area
IEC 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
EN 1992-1-1:2004/A1:2014	EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 12560-5:2001	Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges
EN 12567:2000	Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
ISO 23251:2006	Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems
EN 1993-1-2:2005/AC:2009	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN
EN 12434:2000/AC:2001	CRYOGENIC VESSELS - CRYOGENIC FLEXIBLE HOSES
ISO 15607:2003	Specification and qualification of welding procedures for metallic materials General rules
EN 1998-1:2004/A1:2013	EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 1: GENERAL RULES, SEISMIC ACTIONS AND RULES FOR BUILDINGS
EN 571-1:1997	Non destructive testing - Penetrant testing - Part 1: General principles
EN 970:1997	Non-destructive examination of fusion welds - Visual examination
IEC 61779-1:1998	Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
EN 14620-1:2006	Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General
API 2218 : 2013	FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS
EN ISO 9000:2015	Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
IEC 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
IEC 60079-13:2017	Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
EN 1435:1997/A2:2003	NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
EN ISO 15607:2003	Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 60034-5:2001/A1:2007	ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION
EN 1993-1-1:2005/A1:2014	EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 1776:2015	Gas infrastructure - Gas measuring systems - Functional requirements
EN 1998-5:2004	EUROCODE 8: DESIGN OF STRUCTURES FOR EARTHQUAKE RESISTANCE - PART 5: FOUNDATIONS, RETAINING STRUCTURES AND GEOTECHNICAL ASPECTS
EN 287-1:2011	Qualification test of welders - Fusion welding - Part 1: Steels
EN 60079-2:2014/AC:2015	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)
EN 12066 : 1997	INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - TESTING OF INSULATING LININGS FOR LIQUEFIED NATURAL GAS IMPOUNDING AREAS