BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS

Available format(s)

Hardcopy , PDF

Language(s)

English

Publisher

British Standards Institution

1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Classification
6 EV supply equipment Modes and functions
7 Communications
8 Protection against electric shock
9 Physical conductive electrical interface
   requirements
10 Requirements for adaptors and cord
   extension sets
11 Cable assembly requirements
12 EV supply equipment constructional
   requirements and tests
13 Overload and short-circuit protection
14 Automatic reclosing of protective devices
15 Emergency switching or disconnect (optional)
16 Marking and instructions
Annex A (normative) - Control pilot function
        through a control pilot circuit using PWM and
        a control pilot wire
Annex B (Normative) - Proximity detection and cable
        current coding circuits for the basic interface
Annex C (informative) - Examples of circuit diagrams for
        a basic and universal vehicle couplers
Annex D (Informative) - Control pilot function that
        provides CAN communication using the control
        pilot circuit
Annex E (informative) - Charging station designed with
        a standard socket-outlet - Minimum gap for connection
        of Modes 1 and 2 cable assembly
Bibliography

BS EN 61851-1 Ed 3.0.

Committee	PEL/69
DocumentType	Draft
Pages	159
PublisherName	British Standards Institution
Status	NA

IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV	Information technology equipment - Safety - Part 1: General requirements
IEC 60364-5-54:2011	Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
IEC 60038:2009	IEC standard voltages
IEC 60245-2:1994+AMD1:1997+AMD2:1997 CSV	Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
ISO 6469-2:2009	Electrically propelled road vehicles Safety specifications Part 2: Vehicle operational safety means and protection against failures
IEC 60245-1:2003+AMD1:2007 CSV	Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60068-2-5:2010	Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
ISO 16750-4:2010	Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads
IEC 61540:1997+AMD1:1998 CSV	Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
EN 50470-3:2006	Electricity metering equipment (a.c.) - Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C)
IEC 62053-21:2003+AMD1:2016 CSV	Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)
IEC 60245-6:1994	Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
IEC 62196-2:2016	Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
IEC 60068-2-27:2008	Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60947-4-1:2009+AMD1:2012 CSV	Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60950:1999	Safety of information technology equipment
IEC 62196-3:2014	Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
IEC 60364-4-41:2005+AMD1:2017 CSV	Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 61558-2-4:2009	Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV	Plugs and socket-outlets for household and similar purposes - Part1: General requirements
IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV	Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV	Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
IEC 61558-2-16:2009+AMD1:2013 CSV	Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units
IEC 62335:2008	Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications
IEC 61810-1:2015	Electromechanical elementary relays - Part 1: General and safety requirements
EN 50325-4:2002	Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4: CANopen
IEC 60068-2-53:2010	Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
IEC 60050-442:1998	International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories
IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV	Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules
ISO 4628-3:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
IEC 60364-6:2016	Low voltage electrical installations - Part 6: Verification
IEC 61558-1:2017	Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
SAE J 1772 : 2016	SAE ELECTRIC VEHICLE AND PLUG IN HYBRID ELECTRIC VEHICLE CONDUCTIVE CHARGE COUPLER
ISO 11898-1:2015	Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
ISO 16750-3:2012	Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads
IEC TR 60755:2008	General requirements for residual current operated protective devices
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 60245-4:2011	Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV	Low-voltage switchgear and controlgear - Part 1: General rules
EN 50470-1:2006	Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
IEC 60068-2-2:2007	Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60884-2-5:2017	Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors
IEC 62262:2002	Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
IEC 61558-2-12:2011	Safety of transformers, reactors, power supply units and combination thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage
IEC 60068-2-75:2014	Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV	Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 61439-1:2011	Low-voltage switchgear and controlgear assemblies - Part 1: General rules
EN 50065-1:2011	Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances
IEC TS 61439-7:2014	Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations
EN 50557:2011	Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
IEC 60068-2-1:2007	Environmental testing - Part 2-1: Tests - Test A: Cold
IEC 61180-1:1992	High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
IEC 60947-2:2016	Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 61140:2016	Protection against electric shock - Common aspects for installation and equipment
IEC 61316:1999	Industrial cable reels
IEC 60068-2-14:2009	Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV	Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
IEC 60947-6-1:2005+AMD1:2013 CSV	Low-voltage switchgear and controlgear - Part 6-1: Multiple functionequipment - Transfer switching equipment
ISO 13849-1:2015	Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60068-2-52:2017	Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV	Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
IEC 60990:2016	Methods of measurement of touch current and protective conductor current
IEC 62196-1:2014	Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
SAE J 2411 : 2000	SINGLE WIRE CAN NETWORK FOR VEHICLE APPLICATIONS