• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

16/30328759 DC : 0

NA
NA

Status of Standard is Unknown

BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
Available format(s)

Hardcopy , PDF

Language(s)

English

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for design analysis and examination
5 Requirements for design and manufacture of rides
   and structures
Annex A (informative) - Fatigue analysis
Annex B (normative) - Electrical equipment and control
        systems
Annex C (informative) - Control systems - Best practices
Annex D (informative) - Guidance on design of passenger
        containment
Annex E (informative) - Device Log for an amusement
        device
Annex F (informative) - List of Hazards
Annex G (informative) - Guest behaviour
Annex H (informative) - Limited accessibility to
        amusement devices
Annex I (informative) - Safety envelope for passengers
Annex J (informative) - Acceleration effects on passengers
Bibliography

BS EN 13814-1.

Committee
MCE/3/4
DocumentType
Draft
Pages
176
PublisherName
British Standards Institution
Status
NA

Standards Relationship
PREN 13814-1 : DRAFT 2016 Identical

CEN ISO/TR 20173:2009 Welding - Grouping systems for materials - American materials (ISO/TR 20173:2009)
EN ISO 1346:2012 Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes (ISO 1346:2012)
ISO/TR 20172:2009 Welding Grouping systems for materials European materials
EN ISO 9692-1:2013 Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 14341:2010 Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification
EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
ISO 26304:2011 Welding consumables Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels Classification
ISO 3581:2016 Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification
ISO 14119:2013 Safety of machinery Interlocking devices associated with guards Principles for design and selection
EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
ISO 14343:2017 Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification
ISO 10547:2009 Polyester fibre ropes Double braid construction
ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
EN 61800-5-2:2017 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
ISO 1141:2012 Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes
EN ISO 9692-2:1998/AC:1999 WELDING AND ALLIED PROCESSES - JOINT PREPARATION - PART 2: SUBMERGED ARC WELDING OF STEELS
ISO 17633:2010 Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification
ISO 10042:2005 Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections
ISO 10325:2009 Fibre ropes High modulus polyethylene 8-strand braided ropes, 12-strand braided ropes and covered ropes
ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys
ISO 17635:2016 Non-destructive testing of welds — General rules for metallic materials
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
ISO 10556:2009 Fibre ropes of polyester/polyolefin dual fibres
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
EN ISO 9692-3:2016 Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016)
EN 10228-2:2016 Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN ISO 2307:2010 Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2010)
EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
ISO 4016:2011 Hexagon head bolts Product grade C
ISO 15610:2003 Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
ISO 7250:1996 Basic human body measurements for technological design
EN ISO 3834-4:2005 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005)
ISO/TR 20173:2009 Welding Grouping systems for materials American materials
EN ISO 10554:2009 Polyamide fibre ropes - Double braid construction (ISO 10554:2009)
EN 61558-1:2005/A1:2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
ISO 14732:2013 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
ISO 4034:2012 Hexagon regular nuts (style 1) Product grade C
ISO 14174:2012 Welding consumables — Fluxes for submerged arc welding and electroslag welding — Classification
ISO 4413:2010 Hydraulic fluid power General rules and safety requirements for systems and their components
ISO/TR 15608:2017 Welding Guidelines for a metallic materials grouping system
EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
ISO/TS 17929:2014 Biomechanical effects on amusement ride passengers
EN ISO 14171:2016 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)
EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
ISO 2560:2009 Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
HD 60364-4-41:2017/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
HD 60364-5-54:2011/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
ISO 14731:2006 Welding coordination Tasks and responsibilities
ISO 10572:2009 Mixed polyolefin fibre ropes
ISO 18276:2017 Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification
EN ISO 10547:2009 Polyester fibre ropes - Double braid construction (ISO 10547:2009)
ISO 14118:2000 Safety of machinery Prevention of unexpected start-up
EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels
ISO 4017:2014 Fasteners Hexagon head screws Product grades A and B
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN ISO 16834:2012 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)
EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 14732:2013 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B
ISO 18273:2015 Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification
ISO 9554:2010 Fibre ropes General specifications
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
EN 12195-2:2000 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
EN 10228-1:1999 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
PREN 13814-2 : DRAFT 2016 SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE
ISO 15612:2004 Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
EN ISO 4034:2012/AC:2013 HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012/COR 1:2013)
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
ISO 10554:2009 Polyamide fibre ropes Double braid construction
EN ISO 14174:2012 Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)
EN ISO 15611:2003 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
ISO 9692-1:2013 Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 1181:2004 Fibre ropes — Manila and sisal — 3-, 4- and 8-strand ropes
PREN 13814-3 : DRAFT 2016 SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 3: REQUIREMENTS FOR INSPECTION DURING DESIGN, MANUFACTURE, OPERATION AND USE
EN ISO 15641:2001 Milling cutters for high speed machining - Safety requirements (ISO 15641:2001)
EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)
IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
ISO 9692-3:2016 Welding and allied processes Types of joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
ISO 15611:2003 Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
ISO 14171:2016 Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification
ISO 15641:2001 Milling cutters for high speed machining — Safety requirements
ISO 16834:2012 Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification
ISO/IEC 17020:2012 Conformity assessment — Requirements for the operation of various types of bodies performing inspection
EN ISO 10325:2009 Fibre ropes - High modulus polyethylene - 8-strand braided ropes, 12-strand braided ropes and covered ropes (ISO 10325:2009)
EN ISO 14341:2011 Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)
EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
EN ISO 17635:2016 Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016)
EN ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
EN 50172:2004 Emergency escape lighting systems
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
EN ISO 9554:2010 Fibre ropes - General specifications (ISO 9554:2010)
ISO 17632:2015 Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification
EN 62061:2005/A2:2015 SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015)
ISO 10474:2013 Steel and steel products — Inspection documents
EN 14960:2013 Inflatable play equipment - Safety requirements and test methods
EN ISO 14343:2017 Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017)
EN ISO 18273:2015 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015)
EN ISO 14731:2006 Welding coordination - Tasks and responsibilities (ISO 14731:2006)
AS 3533.1-2009 Amusement rides and devices Design and construction
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
EN ISO 17632:2015 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
EN ISO 14119:2013 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013)
ISO 2307:2010 Fibre ropes Determination of certain physical and mechanical properties
EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
ISO 1346:2012 Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) 3-, 4-, 8- and 12-strand ropes
ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards
EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
EN 1261:1995 Fibre ropes for general service - Hemp
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
ISO 14175:2008 Welding consumables — Gases and gas mixtures for fusion welding and allied processes
EN ISO 18275 : 2012 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION (ISO 18275:2011)
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
EN 1993-1-9:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-9: FATIGUE
EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)
ISO 9692-2:1998 Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels
EN ISO 10556:2009 Fibre ropes of polyester/polyolefin dual fibres (ISO 10556:2009)
EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
ISO 15613:2004 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
ASTM F 381 : 2016 : REDLINE Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
EN 288-9 : 1999 SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST FOR PIPELINE WELDING ON LAND AND OFFSHORE SITE BUTT WELDING OF TRANSMISSION PIPELINES
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
EN ISO 636:2017 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
EN ISO 15610:2003 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
ISO 15607:2003 Specification and qualification of welding procedures for metallic materials General rules
EN 13200-6:2012 Spectator facilities - Part 6 : Demountable (temporary) stands
EN ISO 9606-1:2017 Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)
EN 1991-1-4:2005/A1:2010 EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN ISO 1181 : 2004 FIBRE ROPES - MANILA AND SISAL - 3-, 4- AND 8-STRAND ROPES
EN 1993-1-8:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
EN ISO 10572:2009 Mixed polyolefin fibre ropes (ISO 10572:2009)
EN ISO 1141:2012 Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes (ISO 1141:2012)
ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
CEN ISO/TR 20172:2009 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
ISO 18275:2011 Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification
ISO 3834-3:2005 Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements
IEC 61800-5-2:2016 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
GOST 12.2.049 : 1980 OCCUPATIONAL SAFETY STANDARDS SYSTEM - INDUSTRIAL EQUIPMENT - GENERAL ERGONOMIC REQUIREMENTS
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN ISO/IEC 17020:2012 Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012)
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
ISO 4014:2011 Hexagon head bolts Product grades A and B
ISO 4018:2011 Hexagon head screws Product grade C
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN ISO 14175:2008 Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)

View more information
£36.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.