• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

17/30357380 DC : 0

NA
NA

Status of Standard is Unknown

BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
Available format(s)

Hardcopy , PDF

Language(s)

English

European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective
  measures
6 Verification of safety requirements and/or
  protective measures
7 Information for use
Annex A (informative) - Guidance for specifying
        the operating duty in accordance with
        EN 13001-1
Annex B (informative) - Guidance for specifying
        the classes P of average number of accelerations
        in accordance with EN 13001-1
Annex C (informative) - Calculation of dynamic
        coefficient [phi][h](t)
Annex D (informative) - Loads caused by skewing
Annex E (informative) - Local stresses in wheel
        supporting flanges
Annex F (normative) - Noise test code
Annex G (informative) - Actions on crane supporting
        structures induced by cranes
Annex H (informative) - Selection of a suitable set
        of crane standards for a given application
Annex ZA (informative) - Relationship between this
         European standard and the essential requirements
         of Directive 2006/42/EC aimed to be covered
Bibliography

BS EN 15011.

Committee
MHE/3/3
DocumentType
Draft
Pages
90
PublisherName
British Standards Institution
Status
NA

Standards Relationship
PREN 15011 : DRAFT 2017 Identical

ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 81-43:2009 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
EN 1993-6:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
EN 13001-3-2:2014 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
EN 13557:2003+A2:2008 Cranes - Controls and control stations
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 11660-5:2001 Cranes — Access, guards and restraints — Part 5: Bridge and gantry cranes
EN 60947-5-5 : 1997 AMD 2 2016 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997/A2:2016)
EN 16851:2017 Cranes - Light crane systems
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 15513:2000 Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors
EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
ISO 12480-1:1997 Cranes Safe use Part 1: General
ISO 9926-1:1990 Cranes Training of drivers Part 1: General
EN 12644-2:2000+A1:2008 Cranes - Information for use and testing - Part 2: Marking
ISO 9374-5:1991 Cranes Information to be provided Part 5: Overhead travelling cranes and portal bridge cranes
ISO 4306-1:2007 Cranes — Vocabulary — Part 1: General
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
EN 1991-3:2006/AC:2012 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
ISO 12488-1:2012 Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
HD 60364-4-41:2017/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
ISO 16881-1:2005 Cranes Design calculation for rail wheels and associated trolley track supporting structure Part 1: General
EN 13586:2004+A1:2008 Cranes - Access
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 12482:2014 Cranes Monitoring for crane design working period
EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 9374-1:1989 Cranes Information to be provided Part 1: General
EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN 13001-2:2014 Crane safety - General design - Part 2: Load actions
ISO 4309:2010 Cranes Wire ropes Care and maintenance, inspection and discard
EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 6336-1:2006 Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
EN 13157:2004+A1:2009 Cranes - Safety - Hand powered cranes
EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
EN 60204-11:2000/corrigendum:2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN ISO 14120:2015 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)
ISO 4301-1:2016 Cranes — Classification — Part 1: General
ISO 22986:2007 Cranes — Stiffness — Bridge and gantry cranes
EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
EN 795:2012 Personal fall protection equipment - Anchor devices
ISO 8566-5:2017 Cranes — Cabins and control stations — Part 5: Overhead travelling and portal bridge cranes
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ISO 7752-5:1985 Lifting appliances Controls Layout and characteristics Part 5: Overhead travelling cranes and portal bridge cranes
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
ISO 10245-5:1995 Cranes — Limiting and indicating devices — Part 5: Overhead travelling and portal bridge cranes
IEC 60947-5-5:1997+AMD1:2005+AMD2:2016 CSV Low-voltage switchgear and controlgear - Part 5-5: Control circuitdevices and switching elements - Electrical emergency stop device with mechanical latching function
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
£20.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.