• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

18/30359998 DC : 0

NA
NA

Status of Standard is Unknown

BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
Available format(s)

Hardcopy , PDF

Language(s)

English

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
6 Hydrogen supply safety and operation
7 Equipment and Components
8 Dispensers
9 Hydrogen quality
10 Electrical
11 Instrumentation and control system
12 Station Inspection and Tests
13 Operation
14 Technical documentation
15 Inspection and maintenance
Annex A (informative) - Safety methodologies
        and risk assessment
Annex B (informative) - Further guidance on
        risk management
Annex C (informative) - Hydrogen dispensing and
        examples of fueling and communication
        protocols, and corresponding verification testing
Annex D (informative) - Reference fueling limits of
        hydrogen and fuel cell vehicles
Annex E (informative) - Pressure level terminology
        and application to design verification
        requirements for hydrogen dispensers and
        compressed hydrogen storage systems
Annex F (informative) - Countermeasures for Unknown
        Hydrogen Fueling Protocols
Annex G (informative) - Recommendations for,
        and example of, vehicular impact protection
        measures
Annex H (informative) - Example for leakage testing
        of hydrogen fueling system
Annex I (informative) - Minimum Fueling Station
        Acceptance Inspection, Testing and
        Validation Checklist
Annex J (informative) - Hydrogen Station Testing
        Apparatus (HSTA)
Annex K (informative) - Sampling Procedures and
        Hardware for Hydrogen Fuel Quality
        Analysis
Bibliography

BS ISO 19880-1.

Committee
PVE/3/8
DocumentType
Draft
Pages
182
PublisherName
British Standards Institution
Status
NA

ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems
OHSAS 18002:2000 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - GUIDELINES FOR THE IMPLEMENTATION OF OHSAS 18001:2007
EN 13480-6:2017 Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13458-2:2002/AC:2006 CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
ISO 15649:2001 Petroleum and natural gas industries — Piping
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
ISO 7010:2011 Graphical symbols Safety colours and safety signs Registered safety signs
EN 13530-2:2002/AC:2006 CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
EN 13458-1:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
ISO 11114-1:2012 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials
EN 13445-5 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
ISO 17398:2004 Safety colours and safety signs — Classification, performance and durability of safety signs
ISO 21013-3:2016 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination
ISO 21013-1:2008 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves
IEC 62308:2006 Equipment reliability - Reliability assessment methods
ASTM D 7651 : 2010 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ISO 4126-1:2013 Safety devices for protection against excessive pressure Part 1: Safety valves
ISO 12500-1:2007 Filters for compressed air Test methods Part 1: Oil aerosols
EN 13480-4:2017 Metallic industrial piping - Part 4: Fabrication and installation
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
ISO 21010:2014 Cryogenic vessels Gas/materials compatibility
ISO 21011:2008 Cryogenic vessels — Valves for cryogenic service
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 61340-5-1:2016 Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
ISO 14687-2:2012 Hydrogen fuel Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles
IEC 62023:2011 Structuring of technical information and documentation
EN 1503-2:2000 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
ISO 31000:2009 Risk management Principles and guidelines
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
IEC 61508-5:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)
EN 13648-2:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service
OHSAS 18001:2007 Occupational health and safety management systems. Requirements
ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
2004/108/EC : 2004 DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC
ASTM D 7650 : 2013 : REDLINE Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
EN 13480-1:2017 Metallic industrial piping - Part 1: General
API 2003 : 2015 PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS
EN 13237:2012 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
IEC 62027:2011 Preparation of object lists, including parts lists
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
SAE J 2600 : 2015 Compressed Hydrogen Surface Vehicle Fueling Connection Devices<br>
SAE J 2601 : 2016 FUELING PROTOCOLS FOR LIGHT DUTY GASEOUS HYDROGEN SURFACE VEHICLES
ISO 10417:2004 Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress
ISO 12500-3:2009 Filters for compressed air Test methods Part 3: Particulates
ISO 10628-1:2014 Diagrams for the chemical and petrochemical industry Part 1: Specification of diagrams
IEC 62305-1:2010 Protection against lightning - Part 1: General principles
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 21028-1:2016 Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
EN 1626:2008 Cryogenic vessels - Valves for cryogenic service
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
EN 764-7:2002/AC:2006 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
CEN/TR 13480-7:2017 Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
NFPA 68 : 2013 EXPLOSION PROTECTION BY DEFLAGRATION VENTING
ISO 16964:2015 Gas cylinders Flexible hoses assemblies Specification and testing
NFPA 55 : 2016 COMPRESSED GASES AND CRYOGENIC FLUIDS CODE
ISO 16111:2008 Transportable gas storage devices Hydrogen absorbed in reversible metal hydride
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
ISO 10628-2:2012 Diagrams for the chemical and petrochemical industry — Part 2: Graphical symbols
IEC 61340-4-1:2003+AMD1:2015 CSV Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors
ISO/IEC Guide 73:2002 Risk management Vocabulary Guidelines for use in standards
EN 13371:2001 Cryogenic vessels - Couplings for cryogenic service
NSS 1740.16 : 0 SAFETY STANDARD FOR HYDROGEN AND HYDROGEN SYSTEMS
ISO 4022:1987 Permeable sintered metal materials — Determination of fluid permeability
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
ISO 11114-2:2013 Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials
IEC 61069-7:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
ISO 16528-1:2007 Boilers and pressure vessels — Part 1: Performance requirements
ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
ISO 14001:2015 Environmental management systems — Requirements with guidance for use
ISO 24490:2016 Cryogenic vessels Pumps for cryogenic service
IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
ISO 9809-2:2010 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
ISO 13849-2:2012 Safety of machinery — Safety-related parts of control systems — Part 2: Validation
EN 13530-1:2002 Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements
EN 13648-1:2008 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
2014/68/EU : 2014 COR 1 2015 DIRECTIVE 2014/68/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 MAY 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF PRESSURE EQUIPMENT TEXT WITH EEA RELEVANCE
EN 13501-3:2005+A1:2009 Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers
ISO 10286:2007 Gas cylinders Terminology
ISO 9001:2015 Quality management systems — Requirements
ISO 11114-4:2017 Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
SAE J 2799 : 2014 HYDROGEN SURFACE VEHICLE TO STATION COMMUNICATIONS HARDWARE AND SOFTWARE
EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
ISO 10461:2005 Gas cylinders Seamless aluminium-alloy gas cylinders Periodic inspection and testing
ISO 26142:2010 Hydrogen detection apparatus Stationary applications
ISO 17268:2012 Gaseous hydrogen land vehicle refuelling connection devices
ISO 7751:2016 Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure
ISO 6406:2005 Gas cylinders Seamless steel gas cylinders Periodic inspection and testing
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
SAE J 2601/2 : 2014 FUELING PROTOCOL FOR GASEOUS HYDROGEN POWERED HEAVY DUTY VEHICLES
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
IEC 60079-30-1:2007 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
ASTM D 7606 : 2011 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
IEC 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC 82079-1:2012 Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
ISO 834-1:1999 Fire-resistance tests Elements of building construction Part 1: General requirements
ISO 9809-1:2010 Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
ISO 21013-2:2007 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
EN 12434:2000/AC:2001 CRYOGENIC VESSELS - CRYOGENIC FLEXIBLE HOSES
ISO 16573:2015 Steel Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels
EN 1081:1998 Resilient floor coverings - Determination of the electrical resistance
EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing
ISO 3864:1984 Safety colours and safety signs
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
ISO 21009-1:2008 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests
ISO 12944-7:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
ISO 23208:2017 Cryogenic vessels — Cleanliness for cryogenic service
EN 13458-3:2003/A1:2005 CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 3: OPERATIONAL REQUIREMENTS
ISO 21012:2006 Cryogenic vessels Hoses
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT

View more information
£36.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.