• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

89/686/EEC : 1989 AMD 5 2012

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
Superseded date

09-03-2016

Published date

12-01-2013

Objective is to remove barriers to trade between Member States in personal protective equipment (PPE) by harmonizing basic requirements for the design, manufacture, testing and certification of these goods, while maintaining the highest possible level of safety. PPE means any device or appliance designed to be worn or held by an individual for protection against one or more safety and health hazards. The Directive applies to all PPE intended for professional and private use (sport, leisure, domestic use ) except PPE covered by another Directive with the same objectives.

DevelopmentNote
Superseded by 2016/425/EU, but remains valid until 20/04/2018. (09/2017)
DocumentType
Miscellaneous Product
PublisherName
European Union
Status
Superseded
SupersededBy

10/30207275 DC : 0 BS 8468-6.1 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 6.1: POSITIVE-PRESSURE COMPRESSED AIRLINE EQUIPMENT - SPECIFICATION
BS EN 13277-7:2009 Protective equipment for martial arts Additional requirements and test methods for hand and foot protectors
S.R. CEN/TR 1030-2:2016 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 2: MANAGEMENT MEASURES AT THE WORKPLACE
15/30303027 DC : 0 BS EN ISO 27065 - PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING WORN BY OPERATORS APPLYING LIQUID PESTICIDES AND FOR RE-ENTRY WORKERS
NF CR 13033 : 98 FD PERSONAL PROTECTIVE EQUIPMENT - LIFEJACKETS AND BUOYANCY AIDS - GUIDE FOR SELECTION AND USE
NF EN 363 : 2008 PERSONAL FALL PROTECTION EQUIPMENT - PERSONAL FALL PROTECTION SYSTEMS
BS EN ISO 12312-2:2015 Eye and face protection. Sunglasses and related eyewear Filters for direct observation of the sun
BS EN ISO 12127-1:2015 Clothing to protect against heat and flame. Determination of contact heat transmission through clothing or constituent materials Contact heat produced by heating cylinder
I.S. EN 136:1998 RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING
11/30239230 DC : DRAFT MAR 2011 BS EN ISO 14116 - PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - LIMITED FLAME SPREAD MATERIALS, MATERIAL ASSEMBLIES AND CLOTHING
NF EN 13277-7 : 2009 PROTECTIVE EQUIPMENT FOR MARTIAL ARTS - PART 7: ADDITIONAL REQUIREMENTS AND TEST METHODS FOR HAND AND FOOT PROTECTORS
PD CEN/TR 1030-2:2016 Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace
BS EN ISO 17491-4 : 2008 PROTECTIVE CLOTHING - TEST METHODS FOR CLOTHING PROVIDING PROTECTION AGAINST CHEMICALS - PART 4: DETERMINATION OF RESISTANCE TO PENETRATION BY A SPRAY OF LIQUID (SPRAY TEST) (ISO 17491-4:2008)
PREN 1127-1 : DRAFT 2017 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
PD CEN/TR 16386:2013 Dentistry. Guidelines for handling methacrylate-based materials in the dental laboratory
12/30256100 DC : 0 BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
09/30204814 DC : 0 BS EN 374-1 - PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS
14/30293500 DC : 0 BS EN 14225-3 - DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS
PREN 564 : DRAFT 2013 MOUNTAINEERING EQUIPMENT - ACCESSORY CORD - SAFETY REQUIREMENTS AND TEST METHODS
10/30196552 DC : 0 BS EN ISO 15027-2 - IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY
PREN 374-1 : DRAFT 2009 PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS
S.R. CEN/TR 15419:2017 PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING
16/30341178 DC : 0 BS EN ISO 11393-3 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 3: TEST METHODS FOR FOOTWEAR
FD S70 100 : 2007 FD PERSONAL PROTECTIVE EQUIPMENT (PPE) - GUIDE FOR DRAFTING THE INFORMATION TO BE SUPPLIED BY THE MANUFACTURERS TO THE USERS IN COMPLIANCE WITH DIRECTIVE 89/686/EEC
BS 8467:2006 Protective clothing. Personal protective ensembles for use against chemical, biological, radiological and nuclear (CBRN) agents. Categorization, performance requirements and test methods
10/30216633 DC : 0 BS EN 1621-1 - MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS
BS 8608:2014 Specification for radio telemetry systems for use with respiratory protective devices used by emergency first responders
00/563154 DC : DRAFT JUL 2000 PREN ISO 12402-5 - PERSONAL FLOTATION DEVICES - PART 5: CLASS E (BUOYANCY AIDS - 50 N), SAFETY REQUIREMENTS
BS EN ISO 374-1 : 2016 PROTECTIVE GLOVES AGAINST DANGEROUS CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND PERFORMANCE REQUIREMENTS FOR CHEMICAL RISKS (ISO 374-1:2016)
12/30270980 DC : 0 BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
12/30260502 DC : 0 BS EN 16448-2 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 2: BULLET RESISTANCE - REQUIREMENTS AND TEST METHODS
BS EN ISO 13688:2013 Protective clothing. General requirements
BS EN ISO 11612:2015 Protective clothing. Clothing to protect against heat and flame. Minimum performance requirements
00/562463 DC : DRAFT MAY 2000 PREN ISO 12402-3 - PERSONAL FLOTATION DEVICES - PART 3: CLASS C (OFFSHORE LIFEJACKETS - 150 N), SAFETY REQUIREMENTS
04/30095069 DC : 0 BS EN 443 - FIREFIGHTERS HELMETS
15/30322058 DC : 0 BS EN 958 - MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
03/115243 DC : DRAFT OCT 2003 PR BS EN 511 - PROTECTIVE GLOVES AGAINST COLD
03/115242 DC : DRAFT OCT 2003 BS EN 14786 - PROTECTIVE CLOTHING - DETERMINATION OF RESISTANCE TO PENETRATION BY SPRAYED LIQUID CHEMICALS, EMULSIONS AND DISPERSIONS - ATOMIZER TEST
15/30296817 DC : 0 BS EN ISO 10256-2 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 2: HEAD PROTECTION FOR SKATERS
05/30128013 DC : DRAFT JULY 2005 BS 5655-12 - LIFTS AND SERVICE LIFTS - PART 12: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING HYDRAULIC LIFTS
BS 7971-1:2002 Protective clothing and equipment for use in violent situations and in training General requirements
09/30200151 DC : 0 BS EN ISO 20346 - PERSONAL PROTECTIVE EQUIPMENT - PROTECTIVE FOOTWEAR
BS 8468-2:2006 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Negative pressure, air purifying devices with full face mask. Specification
I.S. 355:2006 SPECIFICATION FOR HELMETS FOR HURLING AND CAMOGIE PLAYERS
PD CLC/TR 60079-32-1:2015 Explosive atmospheres Electrostatic hazards, guidance
BS EN 148-1:1999 Respiratory protective devices: threads for facepieces Standard thread connection
17/30360256 DC : 0 BS EN 15288-2 - SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
17/30365866 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
16/30338920 DC : 0 BS EN 14325 - PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES
S.R. CEN TR 14560:2003 GUIDANCE FOR SELECTION, USE, CARE AND MAINTENANCE OF PROTECTIVE CLOTHING AGAINST HEAT AND FLAME
NF EN 13595-1 : 2003 PROTECTIVE CLOTHING FOR PROFESSIONAL MOTORCYCLE RIDERS - JACKETS, TROUSERS AND ONE-PIECE OR DIVIDED SUITS - PART 1: GENERAL REQUIREMENTS
NF EN 13819-2 : 2003 HEARING PROTECTORS - TESTING - PART 2: ACOUSTIC TEST METHODS
NF EN 15614 : 2007 PROTECTIVE CLOTHING FOR FIREFIGHTERS - LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS FOR WILDLAND CLOTHING
NF EN 352-7 : 2003 HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 7: LEVEL-DEPENDANT EAR-PLUGS
NF EN 352-6 : 2003 HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 6: EAR-MUFFS WITH ELECTRICAL AUDIO INPUT
EN 15567-1:2015 Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements
NF EN 13034 : 2005 + A1 2009 PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT)
BS EN 863:1996 Protective clothing. Mechanical properties. Test method: puncture resistance
BS EN ISO 12402-7 : 2007 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 15567-2:2015 Sports- and recreational facilities. Ropes courses Operation requirements
BS EN 13641:2002 Elimination or reduction of risk of infection related to in vitro diagnostic reagents
BS EN 12094-2:2003 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for non-electrical automatic control and delay devices
BS EN 813:1997 Personal protective equipment for prevention of falls from a height. Sit harnesses
BS EN 352-5:2002 Hearing protectors. Safety requirements and testing Active noise reduction ear muffs
BS EN ISO 15027-3:2012 Immersion suits Test methods
BS EN ISO 10256:2003 Head and face protection for use in ice hockey
BS EN 172:1995 Specification for sunglare filters used in personal eye-protectors for industrial use
BS EN ISO 13982-2:2004 Protective clothing for use against solid particulates Test method of determination of inward leakage of aerosols of fine particles into suits
UNE-EN 1127-1:2012 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
BS EN 14360:2004 Protective clothing against rain. Test method for ready made garments. Impact from above with high energy droplets
BS EN 142:2002 Respiratory protective devices. Mouthpiece assemblies. Requirements, testing, marking
BS EN 374-3:2003 Protective gloves against chemicals and micro-organisms Determination of resistance to permeation by chemicals
ISO 12402-7:2006 Personal flotation devices Part 7: Materials and components Safety requirements and test methods
BS EN 420 : 2003 PROTECTIVE GLOVES - GENERAL REQUIREMENTS AND TEST METHODS
BS EN 354:2010 Personal fall protection equipment. Lanyards
BS EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs
ISO 20349:2010 Personal protective equipment Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding Requirements and test method
BS EN 361:2002 Personal protective equipment against falls from a height. Full body harnesses
BS EN 1149-3:2004 Protective clothing. Electrostatic properties Test methods for measurement of charge decay
BS EN 14605 : 2005 PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY (TYPES PB [3] AND PB [4])
BS EN 13595-1:2002 Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits General requirements
BS EN 13484:2012 Helmets for users of luges
ISO 6942:2002 Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
BS EN 12094-8:2006 Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for connectors
BS EN 353-2:2002 Personal protective equipment against falls from a height Guided type fall arresters including a flexible anchor line
BS EN 374-1:2003 Protective gloves against chemicals and micro-organisms Terminology and performance requirements
BS EN 352-3:2002 Hearing protectors. Safety requirements and testing Ear-muffs attached to an industrial safety helmet
BS EN 893:2010 Mountaineering equipment. Crampons. Safety requirements and test methods
BS EN 966 : 2012 HELMETS FOR AIRBORNE SPORTS
BS EN 12492:2012 Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
I.S. EN 14126:2003+AC:2004 PROTECTIVE CLOTHING - PERFORMANCE REQUIREMENTS AND TESTS METHODS FOR PROTECTIVE CLOTHING AGAINST INFECTIVE AGENTS
BS EN 13087-4:2012 Protective helmets. Test methods Retention system effectiveness
BS EN 12270:2013 Mountaineering equipment. Chocks. Safety requirements and test methods
BS EN 13819-1:2002 Hearing protectors. Testing Physical test methods
BS EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris. Requirements and test methods
BS EN 1497:2007 Personal fall protection equipment. Rescue harnesses
BS EN 14404 : 2004 PERSONAL PROTECTIVE EQUIPMENT - KNEE PROTECTORS FOR WORK IN THE KNEELING POSITION
BS EN ISO 20346:2014 Personal protective equipment. Protective footwear
BS EN 360:2002 Personal protective equipment against falls from a height. Retractable type fall arresters
DIN EN 1127-2:2002-07 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 1078:2012+A1:2012 Helmets for pedal cyclists and for users of skateboards and roller skates
CEN/TR 1030-2:2016 Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace
EN 1077:2007 Helmets for alpine skiers and snowboarders
EN 13087-10:2012 Protective helmets - Test methods - Part 10: Resistance to radiant heat
EN 13087-1:2000/A1:2001 PROTECTIVE HELMETS - TEST METHODS - PART 1: CONDITIONS AND CONDITIONING
EN 13087-6:2012 Protective helmets - Test methods - Part 6: Field of vision
EN 12275:2013 Mountaineering equipment - Connectors - Safety requirements and test methods
EN 12941:1998/A2:2008 RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
EN 13034:2005+A1:2009 Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
EN ISO 12401:2009 Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009)
EN 1149-3:2004 Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay
EN 12278:2007 Montaineering equipment - Pulleys - Safety requirements and test methods
EN 12477:2001/A1:2005 PROTECTIVE GLOVES FOR WELDERS
EN 13087-2:2012 Protective helmets - Test methods - Part 2: Shock absorption
EN 13546:2002+A1:2007 Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
NF EN 381-10 : 2003 PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAINSAWS - PART 10: TEST METHOD FOR UPPER BODY PROTECTORS
EN 133:2001 Respiratory protective devices - Classification
EN 13277-4:2001/A1:2007 PROTECTIVE EQUIPMENT FOR MARTIAL ARTS - PART 4: ADDITIONAL REQUIREMENTS AND TEST METHODS FOR HEAD PROTECTORS
EN 13089:2011+A1:2015 Mountaineering equipment - Ice-tools - Safety requirements and test methods
EN 13567:2002+A1:2007 Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods
EN 12094-2:2003 Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices
EN 13087-5:2012 Protective helmets - Test methods - Part 5: Retention system strength
EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus
EN 12094-8:2006 Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
EN 13794:2002 Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing, marking
PD ISO/TR 2801:2007 Clothing for protection against heat and flame. General recommendations for selection, care and use of protective clothing
BS EN 15288-2:2008 Swimming pools Safety requirements for operation
12/30268236 DC BS EN 943-2. Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols. Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET)
BS EN 12277 : 2015 MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS
16/30332885 DC : 0 BS EN 342 - PROTECTIVE CLOTHING - ENSEMBLES AND GARMENTS FOR PROTECTION AGAINST COLD
13/30279677 DC : 0 BS EN 15567-1 - SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
BS EN 60903:2003 Live working. Gloves of insulating material
12/30271676 DC : 0 BS EN 353-1 - REV PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
BS EN 16805:2015 Diving equipment. Diving mask. Requirements and test methods
10/30236372 DC : 0 BS EN 12276 - MOUNTAINEERING EQUIPMENT - FRICTIONAL ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS
15/30256940 DC : 0 BS EN ISO 10256-1 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS
PREN 958 : DRAFT 2015 METHODSNEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 1149-5:2008 Protective clothing. Electrostatic properties Material performance and design requirements
14/30310789 DC : 0 BS EN 565 - MOUNTAINEERING EQUIPMENT - TAPE - SAFETY REQUIREMENTS AND TEST METHODS
15/30324466 DC : 0 BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
10/30234587 DC : 0 BS 8468-5 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 5: DUAL-MODE APPARATUS - SPECIFICATION
BS EN 1621-4:2013 Motorcyclists\' protective clothing against mechanical impact Motorcyclists\' inflatable protectors. Requirements and test methods
06/30156009 DC : DRAFT SEP 2006 BS EN 13921 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES
12/30254411 DC : 0 BS EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
BS EN ISO 25649-1:2017 Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods
BS EN ISO 20349:2010 Personal protective equipment. Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding. Requirements and test method
06/30157890 DC : 0 BS EN 50496 - DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE
BS EN ISO 10256-1:2016 Protective equipment for use in ice hockey General requirements
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
PREN 892 : DRAFT 2011 MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
16/30347802 DC : 0 BS EN 1149-5 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS
BS 7373-2:2001 Product specifications Guide to identifying criteria for a product specification and to declaring product conformity
15/30313584 DC : 0 BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
BS EN ISO 12401:2009 Small craft. Deck safety harness and safety line. Safety requirements and test methods
PREN 565 : DRAFT 2014 MOUNTAINEERING EQUIPMENT - TAPE - SAFETY REQUIREMENTS AND TEST METHODS
04/30095730 DC : DRAFT APR 2004 EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: FOOTWEAR HIGHLY PROTECTIVE AGAINST CHEMICALS
BS EN 16716:2017 Mountaineering equipment. Avalanche airbag systems. Safety requirements and test methods
15/30296827 DC : 0 BS EN ISO 10256-4 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 4: HEAD AND FACE PROTECTION FOR GOALKEEPERS
PREN 13911 : DRAFT 2013 PROTECTIVE CLOTHING FOR FIREFIGHTERS - REQUIREMENTS AND TEST METHODS FOR FIRE HOODS FOR FIREFIGHTERS
BS EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms Terminology and performance requirements for micro-organisms risks
09/30200146 DC : 0 BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
BS EN ISO 20471 : 2013 HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013)
PREN 943-2 : DRAFT 2016 PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 2: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS FOR EMERGENCY TEAMS (ET)
PREN 342 : DRAFT 2016 PROTECTIVE CLOTHING - ENSEMBLES AND GARMENTS FOR PROTECTION AGAINST COLD
13/30282890 DC : 0 BS EN 564 - MOUNTAINEERING EQUIPMENT - ACCESSORY CORD - SAFETY REQUIREMENTS AND TEST METHODS
00/562571 DC : DRAFT JUN 2000 BS EN 13921-4 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 4: THERMAL CHARACTERISTICS
12/30265636 DC : 0 BS ISO 20346 - PERSONAL PROTECTIVE EQUIPMENT - PROTECTIVE FOOTWEAR
BS EN 15333-1:2008 Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Demand apparatus
04/30095724 DC : DRAFT APR 2004 EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND TEST METHODS
05/30127970 DC : DRAFT JAN 2005 EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
PD CEN/TR 15321:2006 Guidelines on the selection, use, care and maintenance of protective clothing
UNE-EN 16716:2017 Mountaineering equipment - Avalanche Airbag systems - Safety requirements and test methods
S.R. CLC/TR 60079-32-1:2015 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
PREN 1621-1 : DRAFT 2010 MOTORCYCLISTS' PROTECTIVE CLOTHING AGAINST MECHANICAL IMPACT - PART 1: MOTORCYCLISTS' LIMB JOINT IMPACT PROTECTORS - REQUIREMENTS AND TEST METHODS
DIN EN 71-13:2014-07 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
UNI EN 71-4 : 2013 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
I.S. EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
S.R. CEN TR 15419:2006 PROTECTIVE CLOTHING - GUIDELINES FOR SELECTION, USE, CARE AND MAINTENANCE OF CHEMICAL PROTECTIVE CLOTHING
DIN EN ISO 10256-1:2015-08 (Draft) PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016)
NF EN 342 : 2017 PROTECTIVE CLOTHING - ENSEMBLES AND GARMENTS FOR PROTECTION AGAINST COLD
PD CEN/TR 16953:2017 Medical gloves for single use. Guidance for selection
PREN 1809 : DRAFT 2012 DIVING EQUIPMENT - BUOYANCY COMPENSATORS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
S.R. CEN/TR 16149:2011 GUIDANCE DOCUMENT FOR DRAFTING CEN/TC 158 STANDARDS
PREN 50321 : DRAFT 2013 LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS
BS EN ISO 9151:2016 Protective clothing against heat and flame. Determination of heat transmission on exposure to flame
NF EN ISO 12127-2 : 2008 CLOTHING FOR PROTECTION AGAINST HEAT AND FLAME - DETERMINATION OF CONTACT HEAT TRANSMISSION THROUGH PROTECTIVE CLOTHING OR CONSTITUENT MATERIALS - PART 2: TEST METHOD USING CONTACT HEAT PRODUCED BY DROPPING SMALL CYLINDERS
PREN 50575 : DRAFT 2012 POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
PREN 374-2 : DRAFT 2013 PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: DETERMINATION OF RESISTANCE TO PENETRATION
CEN/TR 15419:2017 Protective clothing - Guidelines for selection, use, care and maintenance of chemical protective clothing
EN 1146:2005 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking
NF EN 352-1 : 2003 HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 1: EAR-MUFFS
NF EN 14387 : 2004 + A1 2008 RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING
DIN EN 1005-1:2009-04 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
BS EN 13034 : 2005 PROTECTIVE CLOTHING AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING OFFERING LIMITED PROTECTIVE PERFORMANCE AGAINST LIQUID CHEMICALS (TYPE 6 AND TYPE PB [6] EQUIPMENT)
BS EN 1150:1999 Protective clothing. Visibility clothing for non-professional use. Test methods and requirements
BS EN 14225-4:2005 Diving suits One atmosphere suits (ADS). Human factors requirements and test methods
BS EN 533:1997 Protective clothing. Protection against heat and flame. Limited flame spread materials and material assemblies
BS EN 471 : 2003 HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS
BS EN 143:2000 Respiratory protective devices. Particle filters. Requirements, testing, marking
BS EN 15567-1:2015 Sports and recreational facilities. Ropes courses Construction and safety requirements
BS EN 175:1997 Personal protection. Equipment for eye and face protection during welding and allied processes
BS EN 13274-5:2001 Respiratory protective devices. Methods of test Climatic conditions
BS EN 133:2001 Respiratory protective devices. Classification
BS EN 1385:2012 Helmets for canoeing and white water sports
BS EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination
BS EN 13138-1:2008 Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be worn
ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives
BS EN 13595-2:2002 Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits Test method for determination of impact abrasion resistance
BS EN 958:2017 Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods
BS EN 12083:1998 Respiratory protective devices. Filters with breathing hoses, (non-mask mounted filters). Particle filters, gas filters, and combined filters. Requirements, testing, marking
BS EN 15614:2007 Protective clothing for firefighters. Laboratory test methods and performance requirements for wildland clothing
BS EN 340:2003 Protective clothing. General requirements
BS EN 13567 : 2002 PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS
BS EN ISO 12402-9 : 2006 PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS
BS EN 134:1998 Respiratory protective devices. Nomenclature of components
I.S. EN 1005-1:2002 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
I.S. EN 13087-6:2012 PROTECTIVE HELMETS - TEST METHODS - PART 6: FIELD OF VISION
EN 14387:2004+A1:2008 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
I.S. EN 137:2006 RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
EN 352-7:2002 Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs
EN 352-6:2002 Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input
EN 352-2:2002 Hearing protectors - General requirements - Part 2: Ear-plugs
EN 143:2000/A1:2006 RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING
I.S. EN 15567-2:2015 SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS
DIN EN 1127-1:2011-10 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 13087-5:2012 PROTECTIVE HELMETS - TEST METHODS - PART 5: RETENTION SYSTEM STRENGTH
I.S. EN 1127-2:2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 352-1:2002 Hearing protectors - General requirements - Part 1: Ear-Muffs
I.S. EN 13087-4:2012 PROTECTIVE HELMETS - TEST METHODS - PART 4: RETENTION SYSTEM EFFECTIVENESS
DIN EN 12094-8:2006-07 Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors
I.S. EN 13781:2012 PROTECTIVE HELMETS FOR DRIVERS AND PASSENGERS OF SNOWMOBILES AND BOBSLEIGHS
I.S. EN 1497:2007 PERSONAL FALL PROTECTION EQUIPMENT - RESCUE HARNESSES
I.S. EN 12568:2010 FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS
EN 13819-1:2002 Hearing protectors - Testing - Part 1: Physical test methods
EN 352-3:2002 Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet
I.S. EN 13087-10:2012 PROTECTIVE HELMETS - TEST METHODS - PART 10: RESISTANCE TO RADIANT HEAT
EN 352-5:2002/A1:2005 HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 5: ACTIVE NOISE REDUCTION EAR-MUFFS
EN 352-8:2008 Hearing protectors - Safety requirements and testing - Part 8: Entertainment audio ear-muffs
I.S. EN 12094-8:2006 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
PD 2777:1994 Fabric flammability and burning accidents
BS 5426:1993 Specification for workwear and career wear
BS 5655-11:2005 Lifts and service lifts Code of practice for the undertaking of modifications to existing electric lifts
BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice
NF EN ISO 6942 : 2002 PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FIRE - METHOD OF TEST: EVALUATION OF MATERIALS AND MATERIAL ASSEMBLIES WHEN EXPOSED TO A SOURCE OF RADIANT HEAT
BS 6183-1:2000 Protective equipment for cricketers General requirements
BS 7985:2009 Code of practice for the use of rope access methods for industrial purposes
NF EN 166 : 2002 PERSONAL EYE-PROTECTION - SPECIFICATIONS
NF EN ISO 20345 : 2012 PERSONAL PROTECTIVE EQUIPMENT - SAFETY FOOTWEAR
BS 7985:2013 Code of practice for the use of rope access methods for industrial purposes. Recommendations and guidance supplementary to BS ISO 22846
BS 5655-12:2005 Lifts and service lifts Code of practice for the undertaking of modifications to existing hydraulic lifts
BS 7184:2001 Selection, use and maintenance of chemical protective clothing. Guidance
BS 5883:1996 Specification for surface swimming goggles
BS 4275:1997 Guide to implementing an effective respiratory protective device programme
BS 6526:1998 Domestic oven gloves. Requirements and test methods
UNE-EN 71-13:2015 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
DIN EN 15288-2:2009-05 SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
FD CEN ISO/TR 11610 : 2004 FD PROTECTIVE CLOTHING - VOCABULARY
I.S. EN ISO 10256-1:2016 PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016)
DIN EN 71-13 E : 2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
BS EN 352-8:2008 Hearing protectors. Safety requirements and testing Entertainment audio ear-muffs
BS EN 16350:2014 Protective gloves. Electrostatic properties
BS EN 50496:2008 Determination of workers\' exposure to electromagnetic fields and assessment of risk at a broadcast site
NF EN 14058 : 2017 PROTECTIVE CLOTHING - GARMENTS FOR PROTECTION AGAINST COOL ENVIRONMENTS
PD CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
PREN 360 : DRAFT 2016 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS
I.S. EN 12942:1999 RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
00/562572 DC : DRAFT JUN 2000 BS EN 13921-6 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 6: SENSORY FACTORS
BS EN 14594:2005 Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking
BS PD CEN/TR 16832 : 2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
12/30265285 DC : 0 BS EN 16473 - FIREFIGHTERS HELMETS - HELMETS FOR TECHNICAL RESCUE
14/30293497 DC : 0 BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS
BS EN ISO 12127-2:2007 Clothing for protection against heat and flame. Determination of contact heat transmission through protective clothing or constituent materials Test method using contact heat produced by dropping small cylinders
13/30268672 DC : 0 BS EN 1809 - DIVING EQUIPMENT - BUOYANCY COMPENSATORS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
03/100433 DC : DRAFT JAN 2003 EN 14605 - PROTECTIVE CLOTHING FOR USE AGAINST LIQUID CHEMICALS - PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING WITH LIQUID-TIGHT (TYPE 3) OR SPRAY-TIGHT (TYPE 4) CONNECTIONS BETWEEN PARTS OF THE CLOTHING, INCLUDING ITEMS PROVIDING PROTECTION TO PARTS OF THE BODY ONLY
00/562462 DC : DRAFT MAY 2000 PREN ISO 12402-2 - PERSONAL FLOTATION DEVICES - PART 2: CLASS B (OFFSHORE LIFEJACKETS, EXTREME CONDITIONS - 275 N), SAFETY REQUIREMENTS
PREN 13158 : DRAFT 2017 PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE, FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS
11/30246171 DC : 0 BS EN 71-4 - SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
08/30184738 DC : DRAFT JUNE 2008 BS EN 353-1 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
99/566214 DC : DRAFT NOV 1999 PREN ISO 14876-2 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 2: BULLET RESISTANCE - REQUIREMENTS AND TEST METHODS
14/30281804 DC : 0 BS 8608 - SPECIFICATION FOR RADIO TELEMETRY SYSTEMS FOR THE FIRE AND RESCUESERVICE
09/30200155 DC : 0 BS EN ISO 20347 - PERSONAL PROTECTIVE EQUIPMENT - OCCUPATIONAL FOOTWEAR
BS 8468-4:2008 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Powered air-purifying respirators. Specification
07/30169528 DC : 0 BS EN 15333-2 - RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS
00/565107 DC : DRAFT NOV 2000 BS EN 14052 - SPECIFICATION FOR HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS
BS EN 15649-1 : 2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
12/30260505 DC : 0 BS EN 16448-3 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 3: KNIFE AND SPIKE RESISTANCE - REQUIREMENTS AND TEST METHODS
16/30341170 DC : 0 BS EN ISO 11393-1 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 1: TEST RIG FOR TESTING RESISTANCE TO CUTTING BY A CHAIN-SAW
13/30282508 DC : 0 BS EN 1073-1 - PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION
09/30200131 DC : 0 BS EN ISO 20345 - PERSONAL PROTECTIVE EQUIPMENT - SAFETY FOOTWEAR
11/30239233 DC : DRAFT MAR 2011 BS EN ISO 11611 - PROTECTIVE CLOTHING FOR USE IN WELDING AND ALLIED PROCESSES
13/30284837 DC : 0 BS EN 16689 - PROTECTIVE CLOTHING TO BE WORN BY FIREFIGHTERS DURING TECHNICAL RESCUE OPERATIONS
13/30259878 DC : 0 BS EN ISO 12312-2 - EYE AND FACE PROTECTION - SUNGLASSES AND RELATED EYEWEAR - PART 2: FILTERS FOR DIRECT OBSERVATION OF THE SUN
BS DD253(2001) : 2001 MOUTHGUARDS FOR USE IN SPORT AND RECREATION - REQUIREMENTS AND TEST METHODS
11/30239239 DC : DRAFT MAR 2011 BS EN ISO 11612 - PROTECTIVE CLOTHING - CLOTHING TO PROTECT AGAINST HEAT AND FLAME - MINIMUM PERFORMANCE REQUIREMENTS
11/30247808 DC : 0 BS EN 12270 - MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS
11/30215084 DC : 0 BS EN ISO 6529 - PROTECTIVE CLOTHING - PROTECTION AGAINST CHEMICALS - DETERMINATION OF RESISTANCE OF PROTECTIVE CLOTHING MATERIALS TO PERMEATION BY LIQUIDS AND GASES
ISO/TR 2801:2007 Clothing for protection against heat and flame General recommendations for selection, care and use of protective clothing
NF EN 13158 : 2018 PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE, FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS
BS EN 16473:2014 Firefighters helmets. Helmets for technical rescue
00/563156 DC : DRAFT JULY 2000 PREN ISO 12402-9 - PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS FOR CLASSES A TO F
10/30217692 DC : 0 BS 8468-6.2 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 6.2: CONSTANT FLOW COMPRESSED AIRLINE EQUIPMENT - SPECIFICATION
00/562569 DC : DRAFT JUN 2000 BS EN 13921-1 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 1: GENERAL REQUIREMENTS FOR THE DESIGN AND THE SPECIFICATION
16/30336443 DC : 0 BS EN 207 - PERSONAL EYE-PROTECTION EQUIPMENT - FILTERS AND EYE-PROTECTORS AGAINST LASER RADIATION (LASER EYE-PROTECTORS)
PREN 13634 : DRAFT 2017 PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
PREN 469 : DRAFT 2015 PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING
PREN 13832-1 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
13/30280708 DC : 0 BS EN 374-2 - PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: DETERMINATION OF RESISTANCE TO PENETRATION
04/30095733 DC : DRAFT APR 2004 EN 13832-4 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 4: FOOTWEAR PROTECTIVE AGAINST MICRO-ORGANISMS
UNE-EN 15649-1:2010 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
UNE-EN ISO 10256-1:2017 Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2016)
EN 12277:2015 Mountaineering equipment - Harnesses - Safety requirements and test methods
PREN 407 : DRAFT 2017 PROTECTIVE GLOVES AGAINST THERMAL RISKS (HEAT AND/OR FIRE)
PREN 795 : DRAFT 2009 PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES
CEN/CLC/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
CEN/TR 16953:2017 Medical gloves for single use - Guidance for selection
ISO 10819:2013 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
PD CEN/TR 14560:2003 Guidelines for selection, use, care and maintenance of protective clothing against heat and flame
PREN 15567-1 : DRAFT 2013 SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
EN 388 : 1994 PROTECTIVE GLOVES AGAINST MECHANICAL RISKS
BS EN 388 : 2016 PROTECTIVE GLOVES AGAINST MECHANICAL RISKS
ISO 374-1:2016 Protective gloves against dangerous chemicals and micro-organisms Part 1: Terminology and performance requirements for chemical risks
EN 14325:2004 Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
NF EN 13595-2 : 2003 PROTECTIVE CLOTHING FOR PROFESSIONAL MOTORCYCLE RIDERS - JACKETS, TROUSERS AND ONE-PIECE OR DIVIDED SUITS - PART 2: TEST METHOD FOR DETERMINATION OF IMPACT ABRASION RESISTANCE
NF EN 893 : 2011 MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
NF EN 352-4 : 2001 AMD 1 2006 HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 4: LEVEL-DEPENDENT EAR-MUFFS
DIN EN 1127-2:2014-09 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
DIN EN 12568:2010-10 FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS
NF EN 352-2 : 2003 HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 2: EAR-PLUGS
DIN EN 12477:2005-09 Protective gloves for welders; German version EN 12477:2001 + A1:2005
NF EN 13819-1 : 2003 HEARING PROTECTORS - TESTING - PART 1: PHYSICAL TEST METHODS
ISO 11612:2015 Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements
BS EN ISO 6529:2001 Protective clothing. Protection against chemicals. Determination of resistance of protective clothing materials to permeation by liquids and gases
BS EN 1078 : 2012 HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES
BS EN 168:2002 Personal eye-protection. Non-optical test methods
BS EN 397 : 2012 INDUSTRIAL SAFETY HELMETS
BS EN 13087-5:2012 Protective helmets. Test methods Retention system strength
BS EN 170:2002 Personal eye-protection. Ultraviolet filters.Transmittance requirements and recommended use
ISO 12311:2013 Personal protective equipment — Test methods for sunglasses and related eyewear
BS EN 795:2012 Personal fall protection equipment. Anchor devices
BS EN ISO 12402-3 : 2006 PERSONAL FLOTATION DEVICES - PART 3: LIFEJACKETS, PERFORMANCE LEVEL 150 - SAFETY REQUIREMENTS
BS EN 1621-1:2012 Motorcyclists\' protective clothing against mechanical impact Motorcyclists\' limb joint impact protectors. Requirements and test methods
BS EN 1082-1:1997 Protective clothing. Gloves and arm guards protecting against cuts and stabs by hand knives Chain mail gloves and arm guards
BS EN 13277-2:2000 Protective equipment for martial arts Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
ISO 12127-1:2015 Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials Part 1: Contact heat produced by heating cylinder
BS EN 381-7:1999 Protective clothing for users of hand-held chain saws Requirements for chainsaw protective gloves
BS EN 13274-4:2001 Respiratory protective devices. Methods of test Flame tests
ISO 12402-2:2006 Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements
EN ISO 12402-8:2006/A1:2011 PERSONAL FLOTATION DEVICES - PART 8: ACCESSORIES - SAFETY REQUIREMENTS AND TEST METHODS
EN 420:2003+A1:2009 Protective gloves - General requirements and test methods
EN ISO 12402-6:2006/A1:2010 PERSONAL FLOTATION DEVICES - PART 6: SPECIAL PURPOSE LIFEJACKETS AND BUOYANCY AIDS - SAFETY REQUIREMENTS AND ADDITIONAL TEST METHODS
EN ISO 12402-10:2006 Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006)
EN ISO 12402-3:2006/A1:2010 PERSONAL FLOTATION DEVICES - PART 3: LIFEJACKETS, PERFORMANCE LEVEL 150 - SAFETY REQUIREMENTS
EN ISO 12402-5:2006/A1:2010 PERSONAL FLOTATION DEVICES - PART 5: BUOYANCY AIDS (LEVEL 50) - SAFETY REQUIREMENTS
EN ISO 12402-2:2006/A1:2010 PERSONAL FLOTATION DEVICES - PART 2: LIFEJACKETS, PERFORMANCE LEVEL 275 - SAFETY REQUIREMENTS
EN ISO 12402-4:2006/A1:2010 PERSONAL FLOTATION DEVICES - PART 4: LIFEJACKETS, PERFORMANCE LEVEL 100 - SAFETY REQUIREMENTS
EN 13274-4:2001 Respiratory protective devices - Methods of test - Part 4: Flame tests
EN ISO 12402-7:2006/A1:2011 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS
EN 355:2002 Personal protective equipment against falls from a height - Energy absorbers
EN 381-11:2002 Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper body protectors
EN 362:2004 Personal protective equipment against falls from a height - Connectors
EN 813:2008 Personal fall protection equipment - Sit harnesses
EN ISO 17249:2013/AC:2014 SAFETY FOOTWEAR WITH RESISTANCE TO CHAIN SAW CUTTING (ISO 17249:2013)
EN 142:2002 Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking
EN 13795-1:2002+A1:2009 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Part 1: General requirements for manufacturers, processors and products
EN 144-3:2003/AC:2003 RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 3: OUTLET CONNECTIONS FOR DIVING GASES NITROX AND OXYGEN
EN 137:2006 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking
UNI EN 1127-2 : 2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
UNI EN 12568 : 2010 FOOT AND LEG PROTECTORS - REQUIREMENTS AND TEST METHODS FOR TOECAPS AND PENETRATION RESISTANT INSERTS
EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
UNI EN 1005-1 : 2009 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
DIN EN ISO 10256-1 E : 2017 PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016)
S.R. CEN/TR 16953:2017 MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION
16/30280808 DC : 0 BS 7971-5 - PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 5: FOOTWEAR - REQUIREMENTS AND TEST METHODS
BS EN ISO 10862:2009 Small craft. Quick release system for trapeze harness
16/30338534 DC : 0 BS EN 144-2 - RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 2: OUTLET CONNECTIONS
PREN 144-2 : DRAFT 2016 RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 2: OUTLET CONNECTIONS
PREN 144-1 : DRAFT 2016 RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: INLET CONNECTIONS
BS 8468-5:2011 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Dual-mode apparatus. Specification
BS 8468-3.1:2009 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Specification
PREN 12878 : DRAFT 2012 PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST
I.S. EN ISO 25649-1:2017 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017)
14/30281166 DC : 0 BS EN 50321 - LIVE WORKING - FOOTWEAR FOR ELECTRICAL PROTECTION - INSULATING FOOTWEAR AND OVERBOOTS
BS EN 15333-2:2009 Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Free flow apparatus
I.S. EN 13794:2002 RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS FOR ESCAPE - REQUIREMENTS, TESTING, MARKING
10/30196548 DC : 0 BS EN ISO 15027-1 - IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
10/30196555 DC : 0 BS EN ISO 15027-3 - IMMERSION SUITS - PART 3: TEST METHODS
BS 8468-1:2006 Respiratory equipment for use against chemical, biological, radiological and nuclear (CBRN) agents Positive pressure, self-contained, open-circuit breathing apparatus. Specification
I.S. EN ISO 10256:2003 HEAD AND FACE PROTECTION FOR USE IN ICE HOCKEY
16/30341711 DC : 0 BS EN 943-2 - PROTECTIVE CLOTHING AGAINST DANGEROUS SOLID, LIQUID AND GASEOUS CHEMICALS, INCLUDING LIQUID AND SOLID AEROSOLS - PART 2: PERFORMANCE REQUIREMENTS FOR TYPE 1 (GAS-TIGHT) CHEMICAL PROTECTIVE SUITS FOR EMERGENCY TEAMS (ET)
BS 8469:2007 Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods
NF EN 144-1 : 2000 AMD 2 2005 RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: THREAD CONNECTIONS FOR INSERT CONNECTOR
14/30288533 DC : 0 BS EN 13634:2010 - PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
14/30288142 DC : 0 BS EN 16716 - MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
11/30247805 DC : 0 BS EN 567 - MOUNTAINEERING EQUIPMENT - ROPE CLAMPS - SAFETY REQUIREMENTS AND TEST METHODS
04/30112373 DC : DRAFT SEP 2004 PREN 1149-1 - PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 1: TEST METHOD FOR MEASUREMENT OF SURFACE RESTIVITY
14/30299477 DC : 0 BS EN 568 - MOUNTAINEERING EQUIPMENT - ICE ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS
00/564562 DC : DRAFT SEP 2000 BS EN 469 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - LABORATORY TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING
13/30290127 DC : 0 BS EN 13911 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - REQUIREMENTS AND TEST METHODS FOR FIRE HOODS FOR FIREFIGHTERS
03/117128 DC : 0 EN 1486 - PROTECTIVE CLOTHING FOR FIREFIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING
16/30341182 DC : 0 BS EN ISO 11393-4 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 4: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE GLOVES
11/30242690 DC : 0 BS EN 892 - MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
11/30241728 DC : DRAFT MAR 2011 BS EN ISO 13287 - PERSONAL PROTECTIVE EQUIPMENT - FOOTWEAR - TEST METHOD FOR SLIP RESISTANCE
BS 7971-10:2014 Protective clothing and equipment for use in violent situations and in training Coveralls. Requirements and test methods
CEN/TR 16832 : 2015 COR 2015 SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS)
DIN EN 15649-1:2014-06 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
PREN 16523-2 : DRAFT 2013 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
PREN 14325 : DRAFT 2016 PROTECTIVE CLOTHING AGAINST CHEMICALS - TEST METHODS AND PERFORMANCE CLASSIFICATION OF CHEMICAL PROTECTIVE CLOTHING MATERIALS, SEAMS, JOINS AND ASSEMBLAGES
BS EN 15151-1:2012 Mountaineering equipment. Braking devices Braking devices with manually assisted locking, safety requirements and test methods
16/30341186 DC : 0 BS EN ISO 11393-5 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 5: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE GAITERS
17/30351919 DC : 0 BS EN 13634 - PROTECTIVE FOOTWEAR FOR MOTORCYCLE RIDERS - REQUIREMENTS AND TEST METHODS
16/30296872 DC : 0 BS ISO 10256-5 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 5: NECK LACERATION PROTECTORS FOR ICE HOCKEY PLAYERS
04/30095727 DC : DRAFT APR 2004 EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: PROTECTION AGAINST CHEMICALS SPRAYING
17/30353379 DC : 0 BS EN 13158 - PROTECTIVE CLOTHING - PROTECTIVE JACKETS, BODY AND SHOULDER PROTECTORS FOR EQUESTRIAN USE, FOR HORSE RIDERS AND THOSE WORKING WITH HORSES, AND FOR HORSE DRIVERS - REQUIREMENTS AND TEST METHODS
11/30246792 DC : 0 BS 8468-7 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 7: CLOSED-CIRCUIT BREATHING APPARATUS - SPECIFICATION
16/30341174 DC : 0 BS EN ISO 11393-2 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR LEG PROTECTORS
12/30259025 DC : 0 BS EN 50575 - POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS
12/30260499 DC : 0 BS EN 16448-1 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 1: GENERAL REQUIREMENTS
PD CEN/TR 16149:2011 Guidance Document for drafting CEN/TC 158 Standards
07/30149276 DC : 0 BS 8468-4 - RESPIRATORY PROTECTIVE DEVICES FOR USE AGAINST CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR (CBRN) AGENTS - PART 4: POWERED AIR-PURIFYING RESPIRATORS - SPECIFICATION
PD CEN/TR 15419:2017 Protective clothing. Guidelines for selection, use, care and maintenance of chemical protective clothing
09/30203310 DC : 0 BS EN 15090 - FOOTWEAR FOR FIREFIGHTERS
NF EN 1149-5 : 2008 PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS
DIN EN ISO 10862:2009-10 SMALL CRAFT - QUICK RELEASE SYSTEM FOR TRAPEZE HARNESS
15/30296820 DC : 0 BS EN ISO 10256-3 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 3: FACE PROTECTORS
UNI EN 1127-1 : 2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
UNI EN 71-13 : 2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
UNI EN 15649-1 : 2014 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
BS EN ISO 13287:2012 Personal protective equipment. Footwear. Test method for slip resistance
PREN ISO 15027-1 : DRAFT 2010 IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY
S.R. CEN/TR 16386:2013 DENTISTRY - GUIDELINES FOR HANDLING METHACRYLATE-BASED MATERIALS IN THE DENTAL LABORATORY
BS PD IEC TS 60079-32-1 : 2013 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
I.S. EN 15288-2:2008 SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
ANSI S3.40 : 2002
PREN 12276 : DRAFT 2010 MOUNTAINEERING EQUIPMENT - FRICTIONAL ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 50496:2018 DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE
PREN 353-1 : DRAFT 2012 PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
NF EN 358 : 2000 PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS FOR WORK POSITIONING AND RESTRAINT AND WORK POSITIONING LANYARDS
I.S. EN 71-13:2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
17/30353382 DC : 0 BS EN 17092-1 - PROTECTIVE GARMENTS FOR MOTORCYCLE RIDERS - PART 1: TEST METHODS
17/30359551 DC : 0 BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
BS EN 353-1 : 2014 PERSONAL FALL PROTECTION EQUIPMENT - GUIDED TYPE FALL ARRESTERS INCLUDING AN ANCHOR LINE - PART 1: GUIDED TYPE FALL ARRESTERS INCLUDING A RIGID ANCHOR LINE
BS EN ISO 10819:2013 Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
EN 1073-1:2016/AC:2016 PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT
EN 15288-2:2008 Swimming pools - Part 2: Safety requirements for operation
UNI EN 15288-2 : 2009 SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
NF EN 352-3 : 2003 HEARING PROTECTORS - GENERAL REQUIREMENTS - PART 3: EARMUFFS ATTACHED TO AN INDUSTRIAL SAFETY HELMET
DIN EN 12094-8:2016-06 (Draft) FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
DIN EN 15567-2:2015-08 SPORTS- AND RECREATIONAL FACILITIES - ROPES COURSES - PART 2: OPERATION REQUIREMENTS
BS EN 13921:2007 Personal protective equipment. Ergonomic principles
BS EN 381-10:2002 Protective clothing for users of hand-held chain saws Test method for upper body protectors
BS EN 13594:2015 Protective gloves for motorcycle riders. Requirements and test methods
UNE-EN 530:2011 Abrasion resistance of protective clothing material - Test methods
BS EN 13087-2:2012 Protective helmets. Test methods Shock absorption
BS EN 14529:2005 Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
BS EN 13794:2002 Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Requirements, testing, marking
BS EN 12276:2013 Mountaineering equipment. Frictional anchors. Safety requirements and test methods
BS EN 1146:2005 Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking
ISO 13982-1:2004 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
BS EN 14120 : 2003 PROTECTIVE CLOTHING - WRIST, PALM, KNEE AND ELBOW PROTECTORS FOR USERS OF ROLLER SPORTS EQUIPMENT - REQUIREMENTS AND TEST METHODS
BS EN 402:2003 Respiratory protective devices. Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape. Requirements, testing, marking
BS EN 13087-3:2000 Protective helmets. Test methods Resistance to penetration
BS EN ISO 13997:1999 Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects
BS EN 12568:1998 Foot and leg protectors. Requirements and test methods for toecaps and metal penetration resistant inserts
BS EN 381-9:1997 Protective clothing for users of hand-held chain saws Requirements for chain saw protective gaiters
BS EN 13274-2:2001 Respiratory protective devices. Methods of test Practical performance tests
BS EN 1005-1 : 2001 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
BS EN 1809 : 2014 DIVING EQUIPMENT - BUOYANCY COMPENSATORS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
BS EN 169:2002 Personal eye-protection. Filters for welding and related techniques. Transmittance requirements and recommended use
BS EN 140:1999 Respiratory protective devices. Half masks and quarter masks. Requirements, testing, marking
ISO 17249:2013 Safety footwear with resistance to chain saw cutting
BS EN 171:2002 Personal eye-protection. Infrared filters. Transmittance requirements and recommended use
BS EN 12477:2001 Protective gloves for welders
BS EN 529:2005 Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document
BS EN 12275:2013 Mountaineering equipment. Connectors. Safety requirements and test methods
BS EN 381-8:1997 Protective clothing for users of hand-held chain saws Test methods for chain saw protective gaiters
BS EN 13277-4 : 2001 PROTECTIVE EQUIPMENT FOR MARTIAL ARTS - PART 4: ADDITIONAL REQUIREMENTS AND TEST METHODS FOR HEAD PROTECTORS
BS EN 14325:2004 Protective clothing against chemicals. Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
BS EN 13287:2004 Safety, protective and occupational footwear for professional use. Test method for slip resistance
BS EN ISO 12402-6 : 2006 PERSONAL FLOTATION DEVICES - PART 6: SPECIAL PURPOSE LIFEJACKETS AND BUOYANCY AIDS - SAFETY REQUIREMENTS AND ADDITIONAL TEST METHODS
BS EN 13061:2009 Protective clothing. Shin guards for association football players. Requirements and test methods
BS EN ISO 12402-5 : 2006 PERSONAL FLOTATION DEVICES - PART 5: BUOYANCY AIDS (LEVEL 50) - SAFETY REQUIREMENTS
BS EN 13277-1:2000 Protective equipment for martial arts General requirements and test methods
BS EN 1938:2010 Personal eye protection. Goggles for motorcycle and moped users
BS EN ISO 12402-4 : 2006 PERSONAL FLOTATION DEVICES - PART 4: LIFEJACKETS, PERFORMANCE LEVEL 100 - SAFETY REQUIREMENTS
BS EN 352-1:2002 Hearing protectors. Safety requirements and testing Ear-muffs
BS EN 469:2014 Protective clothing for firefighters. Performance requirements for protective clothing for firefighting
BS EN 12841:2006 Personal fall protection equipment. Rope access systems. Rope adjustment devices
BS EN 355:2002 Personal protective equipment against falls from a height. Energy absorbers
BS EN 564:2014 Mountaineering equipment. Accessory cord. Safety requirements and test methods
BS EN 132:1999 Respiratory protective devices. Definitions of terms and pictograms
BS EN 13087-6:2012 Protective helmets. Test methods Field of vision
ISO 12312-2:2015 Eye and face protection Sunglasses and related eyewear Part 2: Filters for direct observation of the sun
BS EN ISO 13982-1 : 2004 PROTECTIVE CLOTHING FOR USE AGAINST SOLID PARTICULATES - PART 1: PERFORMANCE REQUIREMENTS FOR CHEMICAL PROTECTIVE CLOTHING PROVIDING PROTECTION TO THE FULL BODY AGAINST AIRBORNE SOLID PARTICULATES (TYPE 5 CLOTHING)
BS EN 12021:2014 Respiratory equipment. Compressed gases for breathing apparatus
BS EN 135:1999 Respiratory protective devices. List of equivalent terms
BS EN 13274-6:2002 Respiratory protective devices. Methods of test Determination of carbon dioxide content of the inhalation air
BS EN 403:2004 Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking
ISO 10862:2009 Small craft Quick release system for trapeze harness
ISO 6530:2005 Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids
BS EN 13274-3:2001 Respiratory protective devices. Methods of test Determination of breathing resistance
ISO 10256:2003 Head and face protection for use in ice hockey
ISO 12402-3:2006 Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements
ISO 12402-8:2006 Personal flotation devices Part 8: Accessories Safety requirements and test methods
ISO 20346:2014 Personal protective equipment Protective footwear
BS EN 1127-2:2014 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining
ISO 15027-2:2012 Immersion suits Part 2: Abandonment suits, requirements including safety
ISO 17491-4:2008 Protective clothing Test methods for clothing providing protection against chemicals Part 4: Determination of resistance to penetration by a spray of liquid (spray test)
ISO 13287:2012 Personal protective equipment Footwear Test method for slip resistance
ISO 12402-4:2006 Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements
BS EN 1149-2:1997 Protective clothing. Electrostatic properties Test method for measurement of the electrical resistance through a material (vertical resistance)
ISO 12127-2:2007 Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 2: Test method using contact heat produced by dropping small cylinders
BS EN 362:2004 Personal protective equipment against falls from a height. Connectors
BS EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting
BS EN 136:1998 Respiratory protective devices. Full face masks. Requirements, testing, marking
ISO 22612:2005 Clothing for protection against infectious agents Test method for resistance to dry microbial penetration
BS EN ISO 12402-10:2006 Personal flotation devices Selection and application of personal flotation devices and other relevant devices
ISO 13982-2:2004 Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
ISO 12401:2009 Small craft — Deck safety harness and safety line — Safety requirements and test methods
ISO 12312-1:2013 Eye and face protection Sunglasses and related eyewear Part 1: Sunglasses for general use
BS EN 13274-8:2002 Respiratory protective devices. Methods of test Determination of dolomite dust clogging
BS EN 531:1995 Protective clothing for workers exposed to heat
BS EN 1149-1:2006 Protective clothing. Electrostatic properties Test method for measurement of surface resistivity
BS EN 207:2017 Personal eye-protection equipment. Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN 405 : 2002 RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING
BS EN 352-6:2002 Hearing protectors. Safety requirements and testing Ear-muffs with electrical audio input
BS EN 145:1998 Respiratory protective devices. Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking
BS EN 943-1:2015+A1:2019 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols Performance requirements for Type 1 (gas-tight) chemical protective suits
BS EN 167:2002 Personal eye protection. Optical test methods
BS EN ISO 13998:2003 Protective clothing. Aprons, trousers and vests protecting against cuts and stabs by hand knives
ISO 10256-1:2016 Protective equipment for use in ice hockey Part 1: General requirements
ISO 15027-1:2012 Immersion suits Part 1: Constant wear suits, requirements including safety
BS EN 13087-7:2000 Protective helmets. Test methods Flame resistance
UNE-EN 71-4:2013 Safety of toys - Part 4: Experimental sets for chemistry and related activities
ISO 15025:2016 Protective clothing Protection against flame Method of test for limited flame spread
BS EN ISO 15027-1:2012 Immersion suits Constant wear suits, requirements including safety
BS EN 15090:2012 Footwear for firefighters
BS EN 379 : 2003 PERSONAL EYE-PROTECTION - AUTOMATIC WELDING FILTERS
BS EN 1077:2007 Helmets for alpine skiers and snowboarders
BS EN 1073-2:2002 Protective clothing against radioactive contamination Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
BS EN 13277-3:2013 Protective equipment for martial arts Additional requirements and test methods for trunk protectors
BS EN ISO 12402-2 : 2006 PERSONAL FLOTATION DEVICES - PART 2: LIFEJACKETS, PERFORMANCE LEVEL 275 - SAFETY REQUIREMENTS
BS EN ISO 15025:2016 Protective clothing. Protection against flame. Method of test for limited flame spread
BS EN 12278:2007 Mountaineering equipment. Pulleys. Safety requirements and test methods
BS EN 14052 : 2012 HIGH PERFORMANCE INDUSTRIAL HELMETS
BS EN 12941 : 1999 RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
I.S. EN 15567-1:2015 SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
BS EN 13087-10:2012 Protective helmets. Test methods Resistance to radiant heat
BS EN 13595-3:2002 Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits Test method for determination of burst strength
BS EN ISO 14460:1999 Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods
BS EN 13595-4:2002 Protective clothing for professional motorcycle riders. Jackets, trousers and one piece or divided suits Test methods for the determination of impact cut resistance
BS EN 144-3:2003 Respiratory protective devices. Gas cylinder valves Outlet connections for diving gases Nitrox and oxygen
BS EN 174:2001 Personal eye-protection. Ski goggles for downhill skiing
ISO 12402-6:2006 Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods
BS EN 381-11:2002 Protective clothing for users of hand-held chain saws Requirements for upper body protectors
ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms Part 5: Terminology and performance requirements for micro-organisms risks
BS EN 148-2:1999 Respiratory protective devices: threads for facepieces Centre thread connection
BS EN 566:2017 Mountaineering equipment. Slings. Safety requirements and test methods
EN 353-2:2002 Personal protective equipment against falls from a height - Part 2: Guided type fall arresters including a flexible anchor line
EN 374-3:2003/AC:2006 PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: DETERMINATION OF RESISTANCE TO PERMEATION BY CHEMICALS
EN 1497:2007 Personal fall protection equipment - Rescue harnesses
EN ISO 10256:2003 Head and face protection for use in ice hockey (ISO 10256:2003)
EN 15151-1:2012 Mountaineering equipment - Braking devices - Part 1: Braking devices with manually assisted locking, safety requirements and test methods
EN 170:2002 Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use
EN ISO 12312-1:2013/A1:2015 EYE AND FACE PROTECTION - SUNGLASSES AND RELATED EYEWEAR - PART 1: SUNGLASSES FOR GENERAL USE (ISO 12312-1:2013/AMD 1: 2015)
EN 207:2017 Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors)
EN 403:2004 Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking
EN 15567-2:2015 Sports- and recreational facilities - Ropes courses - Part 2: Operation requirements
EN 1938:2010 Personal eye protection - Goggles for motorcycle and moped users
EN 13595-3:2002 Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3: Test method for determination of burst strength
EN 365:2004/AC:2006 PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - GENERAL REQUIREMENTS FOR INSTRUCTIONS FOR USE, MAINTENANCE, PERIODIC EXAMINATION, REPAIR, MARKING AND PACKAGING
EN 14120:2003+A1:2007 Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods
EN 14529:2005 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
EN 16350:2014 Protective gloves - Electrostatic properties
EN 13594:2015 Protective gloves for motorcycle riders - Requirements and test methods
EN 361:2002 Personal protective equipment against falls from a height - Full body harnesses
EN ISO 22612:2005 Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005)
EN 402:2003 Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking
EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)
EN 14021:2003 Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods
EN 13795:2011+A1:2013 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
EN 1827:1999+A1:2009 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
EN 16805:2015 Diving equipment - Diving mask - Requirements and test methods
EN 15333-2:2009 Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 2: Free flow apparatus
EN 16716:2017 Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods
EN 15090:2012 Footwear for firefighters
EN ISO 13982-1:2004/A1:2010 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd 1:2010)
EN 13921:2007 Personal protective equipment - Ergonomic principles
EN 397:2012+A1:2012 Industrial safety helmets
EN ISO 15027-1:2012 Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
EN 14605:2005+A1:2009 Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
EN 14435:2004 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking
EN ISO 20471:2013/A1:2016 HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013/AMD 1:2016)
EN ISO 12311 : 2013 COR 2014 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR SUNGLASSES AND RELATED EYEWEAR (ISO 12311:2013, CORRECTED VERSION 2014-08-15)
EN ISO 11612:2015 Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015)
EN 16473:2014 Firefighters helmets - Helmets for technical rescue
EN 136:1998/AC:2003 RESPIRATORY PROTECTIVE DEVICES - FULL-FACE MASKS - REQUIREMENTS, TESTING, MARKING
EN ISO 17491-4:2008/A1:2016 Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2008/Amd 1:2016)
EN ISO 6530:2005 Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005)
EN 175:1997 Personal protection - Equipment for eye and face protection during welding and allied processes
EN ISO 13998:2003 Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003)
EN 15649-1:2009+A2:2013 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
EN 13595-1:2002 Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Part 1: General requirements
EN 250:2014 Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing and marking
EN ISO 12127-2:2007 Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007)
EN ISO 20346:2014 Personal protective equipment - Protective footwear (ISO 20346:2014)
EN 14360:2004 Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets
EN 1486:2007 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
EN 169:2002 Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use
EN 1621-1:2012 Motorcyclists' protective clothing against mechanical impact - Part 1: Motorcyclists' limb joint impact protectors - Requirements and test methods
EN 360:2002 Personal protective equipment against falls from a height - Retractable type fall arresters
EN 379:2003+A1:2009 Personal eye-protection - Automatic welding filters
EN 564:2014 Mountaineering equipment - Accessory cord - Safety requirements and test methods
EN ISO 15027-2:2012 Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
EN ISO 20349:2010 Personal protective equipment - Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding - Requirements and test method (ISO 20349:2010)
EN 13595-4:2002 Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance
EN 14052:2012+A1:2012 High performance industrial helmets
EN 566:2017 Mountaineering equipment - Slings - Safety requirements and test methods
EN ISO 15025:2016 Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016)
EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination
EN 374-1:2003 Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements
EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs
EN 13641:2002 Elimination or reduction of risk of infection related to in vitro diagnostic reagents
EN ISO 20347:2012 Personal protective equipment - Occupational footwear (ISO 20347:2012)
EN 14225-4:2005 Diving suits - Part 4: One atmosphere suits (ADS) - Human factors requirements and test methods
EN 13595-2:2002 Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2: Test method for determination of impact abrasion resistance
EN 16471:2014 Firefighters helmets - Helmets for wildland fire fighting
EN 13795-3:2006+A1:2009 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 3: Performance requirements and performance levels
EN 943-1:2015 Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
EN 966:2012+A1:2012 Helmets for airborne sports
EN 958:2017 Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods
EN 471:2003+A1:2007 High-visibility warning clothing for professional use - Test methods and requirements
EN 1621-4:2013 Motorcyclists' protective clothing against mechanical impact - Part 4: Motorcyclists' inflatable protectors - Requirements and test methods
EN 1809:2014+A1:2016 Diving equipment - Buoyancy compensators - Functional and safety requirements, test methods
EN 354:2010 Personal fall protection equipment - Lanyards
EN ISO 10862:2009 Small craft - Quick release system for trapeze harness (ISO 10862:2009)
EN 340:2003 Protective clothing - General requirements
EN ISO 13982-2:2004 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits (ISO 13982-2:2004)
EN ISO 12127-1:2015 Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015)
EN 1385:2012 Helmets for canoeing and white water sports
EN 13087-7:2000/A1:2001 PROTECTIVE HELMETS - TEST METHODS - PART 7: FLAME RESISTANCE
EN 14404:2004+A1:2010 Personal protective equipment - Knee protectors for work in the kneeling position
EN 1731:2006 Personal eye protection - Mesh eye and face protectors
EN 893:2010 Mountaineering equipment - Crampons - Safety requirements and test methods
EN 149:2001+A1:2009 Respiratory protective devices - Filtering half masks to protect against particles - Requirements, testing, marking
11/30199139 DC : 0 BS EN ISO 13688 - PROTECTIVE CLOTHING - GENERAL REQUIREMENTS
13/30287913 DC : 0 BS 7971-10 - PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 10: COVERALLS - REQUIREMENTS AND TEST METHODS
00/565765 DC : DRAFT DEC 2000 BS EN ISO 17250 - SAFETY FOOTWEAR WITH RESISTANCE TO FIRE-FIGHTING HAZARDS
BS PAS 028(2002) : 2002 MARINE SAFETY HELMETS
12/30268675 DC : 0 BS EN 958 - MOUNTAINEERING EQUIPMENT - ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING - SAFETY REQUIREMENTS AND TEST METHODS
PREN 12270 : DRAFT 2011 MOUNTAINEERING EQUIPMENT - CHOCKS - SAFETY REQUIREMENTS AND TEST METHODS
PREN 568 : DRAFT 2014 MOUNTAINEERING EQUIPMENT - ICE ANCHORS - SAFETY REQUIREMENTS AND TEST METHODS
EN 71-13:2014 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
16/30338531 DC : 0 BS EN 144-1 - RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: INLET CONNECTIONS
PREN 1073-1 : DRAFT 2013 PROTECTIVE CLOTHING AGAINST RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR VENTILATED PROTECTIVE CLOTHING AGAINST PARTICULATE RADIOACTIVE CONTAMINATION
17/30353385 DC : 0 BS EN 17092-2 - PROTECTIVE GARMENTS FOR MOTORCYCLE RIDERS - PART 2: HEAVY-DUTY PROTECTIVE GARMENTS - REQUIREMENTS
DIN EN 16716 E : 2017 MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
BS 8468-3.2:2009 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Air-purifying devices incorporating a hood for escape. Specification
11/30212883 DC : 0 BS EN ISO 10819 - MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
PREN 71-4 : DRAFT 2011 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
DIN EN 16716:2015-08 (Draft) MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
99/566215 DC : DRAFT NOV 1999 PREN ISO 14876-1 - PROTECTIVE CLOTHING - BODY ARMOUR - PART 1: GENERAL REQUIREMENTS
09/30194709 DC : 0 BS 10999 - SPECIFICATION FOR DISTRESS SIGNAL UNITS FOR THE FIRE AND RESCUE SERVICE
BS 7971-2:2003 Protective clothing and equipment for use in violent situations and in training Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment
BS 8468-6.2:2011 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Constant flow compressed airline equipment. Specification
16/30341190 DC : 0 BS EN ISO 11393-6 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 6: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR UPPER BODY PROTECTORS
PREN 1149-5 : DRAFT 2016 PROTECTIVE CLOTHING - ELECTROSTATIC PROPERTIES - PART 5: MATERIAL PERFORMANCE AND DESIGN REQUIREMENTS
BS EN ISO 12311:2013 Personal protective equipment. Test methods for sunglasses and related eyewear
PREN 567 : DRAFT 2011 MOUNTAINEERING EQUIPMENT - ROPE CLAMPS - SAFETY REQUIREMENTS AND TEST METHODS
BS 8468-6.1:2011 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Positive-pressure compressed airline equipment. Specification
PREN 12277 : DRAFT 2014 MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS
14/30282553 DC : 0 BS EN ISO 13506-1 - PROTECTIVE CLOTHING AGAINST HEAT AND FLAME - PART 1: TEST METHOD FOR COMPLETE GARMENTS - MEASUREMENT OF TRANSFERRED ENERGY USING AN INSTRUMENTED MANIKIN
CEI EN 50496 : 2010 DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE
14/30304768 DC : 0 BS EN 566 - MOUNTAINEERING EQUIPMENT - SLINGS - SAFETY REQUIREMENTS AND TEST METHODS
14/30301155 DC : 0 BS EN 12277 - MOUNTAINEERING EQUIPMENT - HARNESSES - SAFETY REQUIREMENTS AND TEST METHODS
00/565179 DC : 0 BS EN ISO 11611 - PROTECTIVE CLOTHING FOR USE IN WELDING AND ALLIED PROCESSES
BS EN 71-13:2014 Safety of toys Olfactory board games, cosmetic kits and gustative games
BS EN 16471:2014 Firefighters helmets. Helmets for wildland fire fighting
PREN 14225-3 : DRAFT 2014 DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS
NF EN 352-8 : 2008 HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 8: ENTERTAINMENT AUDIO EAR-MUFFS
14/30304651 DC : 0 BS EN ISO 20349-2 - FOOTWEAR PROTECTING AGAINST RISKS IN FOUNDRIES AND WELDING - PART 2: REQUIREMENTS AND TEST METHODS FOR PROTECTION AGAINST RISKS IN WELDING AND ALLIED PROCESSES
16/30288107 DC : 0 BS 7971-6 - PROTECTIVE CLOTHING AND EQUIPMENT FOR USE IN VIOLENT SITUATIONS AND IN TRAINING - PART 6: GLOVES - REQUIREMENTS AND TEST METHODS
NF EN 14225-2 : 2005 DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS
PREN 207 : DRAFT 2016 PERSONAL EYE-PROTECTION EQUIPMENT - FILTERS AND EYE-PROTECTORS AGAINST LASER RADIATION (LASER EYE-PROTECTORS)
09/30207442 DC : 0 BS EN 16027 - PROTECTIVE CLOTHING - GLOVES WITH PROTECTIVE EFFECT FOR ASSOCIATION FOOTBALL GOAL KEEPERS
09/30192714 DC : 0 BS EN 795 - PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES
BS 7985:2002 Code of Practice for the use of rope access methods for industrial purposes
BS 8468-7:2012 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents Closed-circuit breathing apparatus. Specification
11/30235966 DC : DRAFT MAY 2011 BS EN ISO 12127-1 - PROTECTIVE CLOTHING - PROTECTION AGAINST HEAT AND FLAME - TEST METHOD: DETERMINATION OF THE CONTACT HEAT TRANSMISSION THROUGH PROTECTIVE CLOTHING OR ITS MATERIALS - PART 1: CONTACT HEAT PRODUCED BY HEATING CYLINDER
11/30229088 DC : 0 BS 5655-6 - LIFTS AND SERVICE LIFTS - PART 6: CODE OF PRACTICE FOR THE SELECTION AND INSTALLATION OF NEW LIFTS
NF EN ISO 12401 : 2009 SMALL CRAFT - DECK SAFETY HARNESS AND SAFETY LINE - SAFETY REQUIREMENTS AND TEST METHODS
PREN ISO 15027-2 : DRAFT 2010 IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY
07/30160485 DC : 0 BS EN 13061 - PROTECTIVE CLOTHING - SHIN GUARDS FOR ASSOCIATION FOOTBALL PLAYERS - REQUIREMENTS AND TEST METHODS
06/30148736 DC : 0 EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN
BS 8437(2005) : 2005 CODE OF PRACTICE FOR SELECTION, USE AND MAINTENANCE OF PERSONAL FALL PROTECTION SYSTEMS AND EQUIPMENT FOR USE IN THE WORKPLACE
BS EN 13795:2011+A1:2013 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
I.S. EN 16716:2017 MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 1073-1 : 2016 PROTECTIVE CLOTHING AGAINST SOLID AIRBORNE PARTICLES INCLUDING RADIOACTIVE CONTAMINATION - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPRESSED AIR LINE VENTILATED PROTECTIVE CLOTHING, PROTECTING THE BODY AND THE RESPIRATORY TRACT
PREN 1127-2 : DRAFT 2012 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
I.S. EN 15649-1:2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
I.S. CEN TR 15321:2006 GUIDELINES ON THE SELECTION, USE, CARE AND MAINTENANCE OF PROTECTIVE CLOTHING
16/30332882 DC : 0 BS EN 360 - PERSONAL PROTECTIVE EQUIPMENT AGAINST FALLS FROM A HEIGHT - RETRACTABLE TYPE FALL ARRESTERS
NF EN 14225-3 : 2005 DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT (SYSTEMS) - REQUIREMENTS AND TEST METHODS
PREN 15090 : DRAFT 2009 FOOTWEAR FOR FIREFIGHTERS
BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
BS EN 943-2:2002 Protective clothing against liquid and gaseous chemicals, aerosols and solid particles Performance requirements for \'gas-tight\' (Type 1) chemical protective suits for emergency teams (ET)
EN ISO 25649-1:2017 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017)
EN 1149-5:2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements
CEN/TR 14560:2003 Guidance for selection, use, care and maintenance of protective clothing against heat and flame
NF EN 143 : 2000 AMD 1 2006 RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING
NF EN 13274-2 : 2001 RESPIRATORY PROTECTIVE DEVICES - METHODS OF TEST - PART 2: PRACTICAL PERFORMANCE TESTS
DIN EN 14360 E : 2004 PROTECTIVE CLOTHING AGAINST RAIN - TEST METHOD FOR READY-MADE GARMENTS - IMPACT FROM ABOVE WITH HIGH ENERGY DROPLETS
BS EN 13795-1 : 2002 SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS
BS EN 352-2:2002 Hearing protectors. Safety requirements and testing Ear-plugs
ISO 12402-5:2006 Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements
BS EN 13089 : 2011 MOUNTAINEERING EQUIPMENT - ICE-TOOLS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 14435:2004 Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only. Requirements, testing, marking
ISO 20347:2012 Personal protective equipment Occupational footwear
BS EN 14387 : 2004 RESPIRATORY PROTECTIVE DEVICES - GAS FILTER(S) AND COMBINED FILTER(S) - REQUIREMENTS, TESTING, MARKING
ISO 13688:2013 Protective clothing — General requirements
BS EN ISO 6942:2002 Protective clothing. Protection against heat and fire. Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat
BS EN 149 : 2001 RESPIRATORY PROTECTIVE DEVICES - FILTERING HALF MASKS TO PROTECT AGAINST PARTICLES - REQUIREMENTS, TESTING, MARKING
BS EN 137:2006 Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with full face mask. Requirements, testing, marking
BS EN 13087-1:2000 Protective helmets. Test methods Conditions and conditioning
BS EN 1486:2007 Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting
BS EN ISO 14877:2002 Protective clothing for abrasive blasting operations using granular abrasives
BS EN ISO 12402-8 : 2006 PERSONAL FLOTATION DEVICES - PART 8: ACCESSORIES - SAFETY REQUIREMENTS AND TEST METHODS
BS EN ISO 20347:2012 Personal protective equipment. Occupational footwear
BS EN 352-7:2002 Hearing protectors. Safety requirements and testing Level-dependent ear-plugs
BS EN 365:2004 Personal protective equipment against falls from a height. General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
BS EN ISO 6530:2005 Protective clothing. Protection agaist liquid chemicals. Test method for resistance of materials to penetration by liquids
BS EN 381-4:1999 Protective clothing for users of hand-held chain saws Test methods for chainsaw protective gloves
BS EN 12942 : 1999 RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
BS EN ISO 13995:2001 Protective clothing. Mechanical properties. Test method for the determination of the resistance to puncture and dynamic tearing of materials
BS EN 148-3:1999 Respiratory protective devices: threads for facepieces Thread connection M 45 x 3
BS EN 1731:2006 Personal eye protection. Mesh eye and face protectors
BS EN 1827 : 1999 RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING
BS EN 13546 : 2002 PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS
BS EN 1891:1998 Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes
BS EN ISO 15027-2:2012 Immersion suits Abandonment suits, requirements including safety
BS EN ISO 22612:2005 Clothing for protection against infectious agents. Test method for resistance to dry microbial penetration
BS EN 13795-3 : 2006 SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - PART 3: PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS
BS EN 1095:1998 Deck safety harness and safety line for use on recreational craft. Safety requirements and test methods
ISO 12402-10:2006 Personal flotation devices Part 10: Selection and application of personal flotation devices and other relevant devices
DIN EN 16716:2017-05 MOUNTAINEERING EQUIPMENT - AVALANCHE AIRBAG SYSTEMS - SAFETY REQUIREMENTS AND TEST METHODS
EN 13061:2009 Protective clothing - Shin guards for association football players - Requirements and test methods
EN 13484:2012 Helmets for users of luges
EN 12492:2012 Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods
EN 1127-2:2014 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
EN 13274-6:2001 Respiratory protective devices - Methods of test - Part 6: Determination of carbon dioxide content of the inhalation air
EN 13087-3:2000/A1:2001 PROTECTIVE HELMETS - TEST METHODS - RESISTANCE TO PENETRATION
EN 13287:2004 Personal protective equipment - Footwear - Test method for slip resistance
DIN EN 15567-1:2015-08 SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
EN 12942:1998/A2:2008 RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
EN 1149-2:1997 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)
EN 529:2005 Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document
CEN/TR 16149:2011 Guidance Document for drafting CEN/TC 158 Standards
CEN/TR 15321:2006 Guidelines on the selection, use, care and maintenance of protective clothing
CEN/TR 16386:2013 Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory
EN 13087-4:2012 Protective helmets - Test methods - Part 4: Retention system effectiveness
EN 12568:2010 Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 12276:2013 Mountaineering equipment - Frictional anchors - Safety requirements and test methods
EN 12270:2013 Mountaineering equipment - Chocks - Safety requirements and test methods
DIN EN 529:2006-01 Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document
DIN EN ISO 10256-1:2017-05 PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 1: GENERAL REQUIREMENTS (ISO 10256-1:2016)
EN 1149-1:2006 Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity
EN 12841:2006 Personal fall protection equipment - Rope access systems - Rope adjustment devices
EN 1073-2:2002 Protective clothing against radioactive contamination - Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
EN 15333-1 : 2008/AC : 2009 RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS
EN 13277-3:2013 Protective equipment for martial arts - Part 3: Additional requirements and test methods for trunk protectors
EN 13274-8:2002 Respiratory protective devices - Methods of test - Part 8: Determination of dolomite dust clogging
EN ISO 13688:2013 Protective clothing - General requirements (ISO 13688:2013)
NF EN 381-11 : 2003 PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAINSAWS - PART 11: REQUIREMENTS FOR UPPER BODY PROTECTORS
EN 13277-7:2009 Protective equipment for martial arts - Part 7: Additional requirements and test methods for hand and foot protectors
DIN EN 13921:2007-08 Personal protective equipment - Ergonomic principles
EN 60903 : 2003 COR 2005 LIVE WORKING - GLOVES OF INSULATING MATERIAL
EN 50496:2018 Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site
DIN EN 14360:2004-09 Protective clothing against rain - Test method for ready made garments - Impact from above with high energy droplets

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.