|
PREN 1871 : DRAFT 2012
|
ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS |
|
99/541173 DC : DRAFT OCT 1999
|
BS EN 13731 - SPECIFICATION FOR LIFTING BAGS FOR FIRE AND RESCUE SERVICE USE |
|
05/30128010 DC : DRAFT JUL 2005
|
BS 5655-11 - LIFTS AND SERVICE LIFTS - PART 11: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING ELECTRIC LIFTS |
|
BS EN 15821 : 2010
|
MULTI-FIRING SAUNA STOVES FIRED BY NATURAL WOOD LOGS - REQUIREMENTS AND TEST METHODS |
|
00/100745 DC : DRAFT MAR 2000
|
PREN 13859-2 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
|
04/30103157 DC : DRAFT MARCH 2004
|
BS EN 12094-8 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8 - REQUIREMENTS AND TEST METHODS FOR FLEXIBLE CONNECTORS |
|
00/122333 DC : DRAFT JUNE 2000
|
BS EN 13917-1 - WATER METERS WITHIN THE SCOPE OF DIRECTIVES 75/33/EEC AND 79/830/EEC, EQUIPPED WITH ELECTRONIC TOTALISING DEVICES - PART 1: GENERAL REQUIREMENTS |
|
12/30267845 DC : 0
|
BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
|
NF EN 352-10 : 2017 PR
|
HEARING PROTECTORS - SAFETY REQUIREMENTS AND TESTING - PART 10: EARPLUGS WITH ENTERTAINMENT AUDIO INPUT |
|
BS EN 14989-2 : 2007
|
CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR METAL CHIMNEYS AND MATERIAL INDEPENDENT AIR SUPPLY DUCTS FOR ROOM SEALED HEATING APPLICATIONS - PART 2: FLUE AND AIR SUPPLY DUCTS FOR ROOM SEALED APPLIANCES |
|
PREN 12878 : DRAFT 2012
|
PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
|
04/30089457 DC : DRAFT APR 2004
|
BS 5656-2 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS - SELECTION, INSTALLATION AND LOCATION OF NEW ESCALATORS AND MOVING WALKS |
|
12/30266154 DC : 0
|
BS EN 16497-1 - CHIMNEYS - CONCRETE SYSTEM CHIMNEYS - PART 1: NON-BALANCED FLUE APPLICATIONS |
|
99/707964 DC : DRAFT MAY 1999
|
PREN 12312-19 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 19: AIRCRAFT JACKS AND HYDRAULIC TAIL STANCHIONS |
|
BS EN 15283-1 : 2008
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
|
11/30249117 DC : 0
|
BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
|
BS EN 13245-2:2008
|
PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
|
00/122334 DC : DRAFT JUNE 2000
|
BS EN 13917-2 - WATER METERS WITHIN THE SCOPE OF DIRECTIVES 75/33/EEC AND 79/830/EEC, EQUIPPED WITH ELECTRONIC TOTALISING DEVICES - PART 2: PATTERN APPROVAL TESTS |
|
CEI EN 50419 : 2006
|
MARKING OF ELECTRICAL AND ELECTRONIC EQUIPMENT IN ACCORDANCE WITH ARTICLE 11(2) OF DIRECTIVE 2002/96/EC (WEEE) |
|
97/710191 DC : DRAFT JUN 1997
|
PREN 12921-3 - MACHINES FOR SURFACE CLEANING AND PRETREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
|
BS EN 54-29 : 2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 29: MULTI-SENSOR FIRE DETECTORS - POINT DETECTORS USING A COMBINATION OF SMOKE AND HEAT SENSORS |
|
I.S. EN ISO 10256:2003
|
HEAD AND FACE PROTECTION FOR USE IN ICE HOCKEY |
|
00/108536 DC : 0
|
PREN 14064-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
BS EN 15037-1 : 2008
|
PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 1: BEAMS |
|
BS EN 1090-1 : 2009
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
|
BS EN 12101-7 : 2011
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
|
BS EN 15743 : 2010
|
SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
04/30103167 DC : DRAFT MARCH 2004
|
BS EN 12094-6 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6 - REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES FOR CO2 SYSTEMS |
|
BS 9999(2008) : 2008
|
CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, MANAGEMENT AND USE OF BUILDINGS |
|
BS EN 10088-5 : 2009
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
|
BS ISO 22559-1 : 2014
|
SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS) |
|
13/30246939 DC : 0
|
BS ISO 8124-5 - SAFETY OF TOYS - PART 5: DETERMINATION OF TOTAL CONCENTRATION OF CERTAIN ELEMENTS IN TOYS |
|
04/30103162 DC : DRAFT MARCH 2004
|
EN 12094-5 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5 - REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALUES AND THEIR ACTUATORS |
|
BS 9999:2017
|
Fire safety in the design, management and use of buildings. Code of practice |
|
12/30256100 DC : 0
|
BS EN 12878 - PIGMENTS FOR THE COLOURING OF BUILDING MATERIALS BASED ON CEMENT AND/OR LIME - SPECIFICATIONS AND METHODS OF TEST |
|
12/30264755 DC : 0
|
BS ISO 22559-1 - SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS) |
|
BS 5655-6(2011) : 2011
|
LIFTS AND SERVICE LIFTS - PART 6: CODE OF PRACTICE FOR THE SELECTION, INSTALLATION AND LOCATION OF NEW LIFTS |
|
BS 5656-2(2004) : 2004
|
ESCALATOR AND MOVING WALKS - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS - PART 2: CODE OF PRACTICE FOR THE SELECTION, INSTALLATION AND LOCATION OF NEW ESCALATORS AND MOVING WALKS |
|
05/30099723 DC : DRAFT AUG 2005
|
EN 12352 - TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES |
|
BS EN 15283-2 : 2008
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
|
EN 1279-5:2005+A2:2010
|
GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
|
BS EN 14229 : 2010
|
STRUCTURAL TIMBER - WOOD POLES FOR OVERHEAD LINES |
|
BS 5655-11(2005) : 2005
|
LIFTS AND SERVICE LIFTS - PART 11: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING ELECTRIC LIFTS |
|
BS EN 14315-1 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
|
12/30255284 DC : DRAFT APR 2012
|
BS EN 1096-4 - GLASS IN BUILDING - COATED GLASS - PART 4: EVALUATION OF CONFORMITY - PRODUCT STANDARD |
|
12/30266874 DC
|
BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications |
|
BS EN 15285 : 2008
|
AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
|
BS 5655-12(2005) : 2005
|
LIFTS AND SERVICE LIFTS - PART 12: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING HYDRAULIC LIFTS |
|
00/708470 DC : DRAFT APR 2000
|
PREN 13886 - FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH STIRRER AND/OR MIXER - SAFETY AND HYGIENE |
|
12/30266871 DC : 0
|
BS EN 1790 - ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS |
|
12/30261882 DC : 0
|
BS EN 14081-1 - TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS-SECTION - PART 1: GENERAL REQUIREMENTS |
|
BS EN 50419:2006
|
Marking of electrical and electronic equipment in accordance with article 11(2) of Directive 2002/96/EC (WEEE) |
|
13/30217369 DC : 0
|
BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
|
BS PD CLC/TR 50456 : 2008
|
ALARM SYSTEMS - GUIDELINES TO ACHIEVING COMPLIANCE WITH EC DIRECTIVES FOR EQUIPMENT OF ALARM SYSTEMS |
|
BS EN 14318-1:2013
|
Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the rigid foam dispensed system before installation |
|
12/30268279 DC : 0
|
BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
|
16/30314117 DC : 0
|
BS 9999 - FIRE SAFETY IN THE DESIGN, MANAGEMENT AND USE OF BUILDINGS - CODE OF PRACTICE |
|
TS 102 874-6 : 1.1.1
|
ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); EXTERNAL COMMON POWER SUPPLY FOR CUSTOMER PREMISES NETWORK AND ACCESS EQUIPMENT; PART 6: CPS TYPE 2.D IMPLEMENTATION DETAILS |
|
12/30265759 DC : 0
|
BS EN 845-3 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL MESHWORK |
|
PREN 50366 : DRAFT 2000
|
MEASURING METHODS FOR DETERMINING THE MAGNETIC FLUX DENSITY IN THE SPACE AROUND HOUSEHOLD AND SIMILAR APPLIANCES WITH PARTICULAR REGARD TO HUMAN EXPOSURE |
|
BS EN 54-26 : 2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS |
|
12/30270374 DC : 0
|
BS EN 15501 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXPANDED PERLITE (EP) AND EXFOLIATED VERMICULITE (EV) PRODUCTS - SPECIFICATION |
|
05/30133728 DC : DRAFT MAY 2005
|
EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
|
00/245438 DC : DRAFT NOV 2000
|
PREN 50366 - MEASURING METHODS FOR DETERMINING THE MAGNETIC FLUX DENSITY IN THE SPACE AROUND HOUSEHOLD AND SIMILAR APPLIANCES WITH PARTICULAR REGARD TO HUMAN EXPOSURE |
|
BS EN 1337-8:2007
|
Structural bearings Guide bearings and restraint bearings |
|
12/30256925 DC : 0
|
BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
|
CSA ISO 22559-1 : 2016
|
SAFETY REQUIREMENTS FOR LIFTS (ELEVATORS) - PART 1: GLOBAL ESSENTIAL SAFETY REQUIREMENTS (GESRS) |
|
01/107225 DC : DRAFT OCT 2001
|
PREN 14250 - TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED TRUSSES USING PUNCHED METAL PLATE FASTENERS |
|
BS EN 15650 : 2010
|
VENTILATION FOR BUILDINGS - FIRE DAMPERS |
|
DIN EN 16327:2014-07
|
FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
|
99/708376 DC : DRAFT MAR 1999
|
PREN 13586 - CRANES - ACCESS |
|
BS EN 15732:2012
|
Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA) |
|
PREN 1790 : DRAFT 2012
|
ROAD MARKING MATERIALS - PREFORMED ROAD MARKINGS |
|
BS EN 16327 : 2014
|
FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
|
BS EN 15258 : 2008
|
PRECAST CONCRETE PRODUCTS - RETAINING WALL ELEMENTS |
|
12/30259025 DC : 0
|
BS EN 50575 - POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
|
UNI EN 16327 : 2014
|
FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
|
BS EN 12101-8 : 2011
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
|
99/707963 DC : DRAFT MAY 1999
|
PREN 12312-18 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: OXYGEN/NITROGEN UNITS |
|
BS EN 15286 : 2013
|
AGGLOMERATED STONE - SLABS AND TILES FOR WALL FINISHES (INTERNAL AND EXTERNAL) |
|
BS EN 12966:2014
|
ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS |
|
BS EN 10343 : 2009
|
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
|
97/707829 DC : DRAFT MAY 1997
|
PREN 12851 - FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS |
|
97/713936 DC : DRAFT AUG 1997
|
PREN 13000 - CRANES - SAFETY - MOBILE CRANES |
|
BS EN 12273:2008 (published 2009-06)
|
Slurry surfacing. Requirements |
|
BS EN 15600-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
DIN 14430:2008-12
|
FIRE FIGHTING - POSITIVE PRESSURE FOAM SYSTEMS AND COMPRESSED AIR FOAM SYSTEMS |
|
11/30229088 DC : 0
|
BS 5655-6 - LIFTS AND SERVICE LIFTS - PART 6: CODE OF PRACTICE FOR THE SELECTION AND INSTALLATION OF NEW LIFTS |
|
BS 7083(1996) : 1996
|
GUIDE TO THE ACCOMMODATION AND OPERATING ENVIRONMENT FOR INFORMATION TECHNOLOGY (IT) EQUIPMENT |
|
UNI CEI EN ISO 14971 : 2012
|
MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
|
BS EN 54-25 : 2008
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
|
08/30183861 DC : DRAFT SEP 2008
|
BS EN 13732 - FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
|
00/105249 DC : DRAFT JULY 2000
|
PREN 13956 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
|
BS EN 15498 : 2008
|
PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
|
BS ISO 21789:2009
|
Gas turbine applications. Safety |
|
TS 102 973 : 1.1.1
|
ACCESS TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); NETWORK TERMINATION (NT) IN NEXT GENERATION NETWORK ARCHITECTURES |
|
12/30258203 DC : 0
|
BS EN 16397-1 - FLEXIBLE COUPLINGS - PART 1: PERFORMANCE REQUIREMENTS |
|
BS DD9999(2005) : 2005
|
CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, CONSTRUCTION AND USE OF BUILDINGS |
|
05/30128013 DC : DRAFT JULY 2005
|
BS 5655-12 - LIFTS AND SERVICE LIFTS - PART 12: CODE OF PRACTICE FOR THE UNDERTAKING OF MODIFICATIONS TO EXISTING HYDRAULIC LIFTS |
|
BS EN 15069 : 2008
|
SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
|
98/105109 DC : DRAFT JUNE 1998
|
PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY |
|
97/708413 DC : DRAFT APR 1997
|
PREN 12312-7 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIRCRAFT MOVEMENT EQUIPMENT |
|
BS EN 15389 : 2008
|
INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS |
|
99/711929 DC : DRAFT JUL 1999
|
EN 13621 - FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS |
|
09/30187535 DC : 0
|
BS EN 13000 - CRANES - MOBILE CRANES |
|
06/30148769 DC : 0
|
EN 10249-1 - COLD FORMED STEEL SHEET PILING - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
00/105248 DC : DRAFT JULY 2000
|
PREN 13859-1 - FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
|
BS 5446-3:2005
|
FIRE DETECTION AND FIRE ALARM DEVICES FOR DWELLINGS - PART 3: SPECIFICATION FOR SMOKE ALARM KITS FOR DEAF AND HARD OF HEARING PEOPLE |
|
PREN 14342 : DRAFT 2011
|
WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
|
BS EN 10088-4 : 2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
|
CLC/TR 50456:2008
|
ALARM SYSTEMS - GUIDELINES TO ACHIEVING COMPLIANCE WITH EC DIRECTIVES FOR EQUIPMENT OF ALARM SYSTEMS |
|
PREN 13964 : DRAFT 2013
|
SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
|
BS EN 15101-1:2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
|
BS EN 15037-3 : 2009
|
PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
|
BS EN 14064-1:2010
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
I.S. EN 50419:2006
|
MARKING OF ELECTRICAL AND ELECTRONIC EQUIPMENT IN ACCORDANCE WITH ARTICLE 11(2) OF DIRECTIVE 2002/96/EC (WEEE) |
|
BS EN 1013 : 2012
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
|
NF EN 301091-2 : 2009
|
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - SHORT RANGE DEVICES - ROAD TRANSPORT AND TRAFFIC TELEMATICS (RTTT) - RADAR EQUIPMENT OPERATING IN THE 76 GHZ TO 77 GHZ RANGE - PART 2: HARMONISED EN COVERING ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
|
BS EN 14592 : 2008
|
TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
|
BS EN 15037-2 : 2009
|
PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 2: CONCRETE BLOCKS |
|
BS EN 15368 : 2008
|
HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
BS EN 1279-5 : 2005
|
GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
|
BS EN 15037-4 : 2010
|
PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
|
I.S. EN 16327:2014
|
FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
|
UNE-EN 16327:2015
|
Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
|
ISO 8124-3:2010
|
Safety of toys Part 3: Migration of certain elements |
|
EN 15102:2007+A1:2011
|
DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
|
BS 6739(2009) : 2009
|
CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS: INSTALLATION DESIGN AND PRACTICE |
|
PREN 1279-5 : DRAFT 2015
|
GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
|
BS EN 15129:2009
|
ANTI-SEISMIC DEVICES |
|
15/30319715 DC : 0
|
BS EN 1279-5 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
|
12/30268937 DC : 0
|
BS EN 16491 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION |
|
PREN 16491 : DRAFT 2012
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION |
|
ISO 22559-1:2014
|
Safety requirements for lifts (elevators) Part 1: Global essential safety requirements (GESRs) |
|
PREN 50575 : DRAFT 2012
|
POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
|
EN 15101-1 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
|
TR 102 937 : 1.1.1
|
ECALL COMMUNICATIONS EQUIPMENT; CONFORMANCE TO EU VEHICLE REGULATIONS, R&TTE, EMC & LV DIRECTIVES, AND EU REGULATIONS FOR ECALL IMPLEMENTATION |
|
EN ISO 14971:2012
|
MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01) |
|
ISO 21789:2009
|
Gas turbine applications — Safety |
|
BS EN 14846 : 2008
|
BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
|
BS EN 15599-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
EN 54-12:2015
|
Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam |
|
ISO 14971:2007
|
Medical devices Application of risk management to medical devices |
|
BS EN ISO 14971:2012
|
MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01) |
|
EN 54-4:1997/A2:2006
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT |
|
DIN EN 12101-1:2006-06
|
Smoke and heat control systems - Part 1: Specification for smoke barriers |
|
DIN EN 12644-2:2009-06
|
CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING |
|
DIN EN 14466 E : 2008
|
FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
|
DIN EN 14466:2008-09
|
FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
|
DIN EN 598:2009-10
|
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
|
BS EN 12899-4 : 2007
|
FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 4: FACTORY PRODUCTION CONTROL |
|
BS EN 544 : 2011
|
BITUMEN SHINGLES WITH MINERAL AND/OR SYNTHETIC REINFORCEMENTS - PRODUCT SPECIFICATION AND TEST METHODS |
|
BS EN 12966-1 : 2005
|
ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
|
BS EN 40-4 : 2005
|
LIGHTING COLUMNS - PART 4: REQUIREMENTS FOR REINFORCED AND PRESTRESSED CONCRETE LIGHTING COLUMNS |
|
BS EN 12094-2 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL AUTOMATIC CONTROL AND DELAY DEVICES |
|
BS EN 14466 : 2005
|
FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
|
BS EN ISO 10256 : 2003
|
HEAD AND FACE PROTECTION FOR USE IN ICE HOCKEY |
|
BS EN 13063-3 : 2007
|
CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS |
|
BS EN 517 : 2006
|
PREFABRICATED ACCESSORIES FOR ROOFING - ROOF SAFETY HOOKS |
|
BS EN 179 : 2008
|
BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
|
BS EN 416-1:2009
|
Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety |
|
BS EN 1856-1 : 2009
|
CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 1: SYSTEM CHIMNEY PRODUCTS |
|
BS EN 681-2 : 2000
|
ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
|
BS EN 14889-2 : 2006
|
FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
|
BS EN 54-4 : 1998
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT |
|
DIN EN 14710-1 E : 2009
|
FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
|
BS EN 1916:2002
|
Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
|
BS EN 10210-1 : 2006
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
BS EN 1463-1:2009 (published 2015-09)
|
Road marking materials. Retroreflecting road studs Initial performance requirements |
|
BS EN 1825-1 : 2004
|
GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
|
BS EN 778:2009
|
Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
|
BS EN 13658-1 : 2005
|
METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING |
|
BS EN 14904:2006
|
Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification |
|
BS EN 54-12:2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM |
|
BS EN 934-5:2007
|
Admixtures for concrete, mortar and grout Admixtures for sprayed concrete. Definitions, requirements, conformity, marking and labelling |
|
BS EN 621:2009
|
Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
|
BS EN 13135-1 : 2003
|
CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT |
|
BS EN 14023 : 2010
|
BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
|
BS EN 10255:2004
|
Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions |
|
BS EN 12094-12:2003
|
Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pneumatic alarm devices |
|
BS EN 54-23 : 2010
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
|
BS EN 12094-6 : 2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6: REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES |
|
BS EN 12004 : 2007
|
ADHESIVES FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
|
BS EN 681-4 : 2000
|
ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS |
|
BS EN 1125 : 2008
|
BUILDING HARDWARE - PANIC EXIT DEVICES OPERATED BY A HORIZONTAL BAR, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
|
BS EN 15050 : 2007
|
PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS |
|
BS EN 14647 : 2005
|
CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
BS EN 12899-2:2007
|
Fixed, vertical road traffic signs Transilluminated traffic bollards (TTB) |
|
BS EN 12271:2006 (published 2009-06)
|
Surface dressing. Requirements |
|
BS EN 14991 : 2007
|
PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS |
|
BS EN 295-4 : 2013
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
|
BS EN 598 : 2007
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
|
BS EN 12839 : 2012
|
PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
|
BS EN 13084-5 : 2005
|
FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS |
|
BS EN 1337-5 : 2005
|
STRUCTURAL BEARINGS - PART 5: POT BEARINGS |
|
BS EN 12899-1:2007
|
FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
|
BS EN 295-7 : 2013
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
|
BS EN 12899-3 : 2007
|
FIXED, VERTICAL ROAD TRAFFIC SIGNS - DELINEATOR POSTS AND RETROREFLECTORS |
|
BS EN 13658-2 : 2005
|
METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING |
|
BS EN 295-1 : 2013
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS |
|
BS EN 998-1:2016
|
Specification for mortar for masonry Rendering and plastering mortar |
|
BS EN 12094-8 : 2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
|
BS EN 10340 : 2007
|
STEEL CASTINGS FOR STRUCTURAL USES |
|
BS EN 520 : 2004
|
GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
|
BS EN 14992 : 2007
|
PRECAST CONCRETE PRODUCTS - WALL ELEMENTS |
|
BS EN 14989-1 : 2007
|
CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR METAL CHIMNEYS AND MATERIAL INDEPENDENT AIR SUPPLY DUCTS FOR ROOMSEALED HEATING APPLICATIONS - PART 1: VERTICAL AIR/FLUE TERMINALS FOR C6-TYPE APPLIANCES |
|
BS EN 14964 : 2006
|
RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
|
BS EN 14566 : 2008
|
MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
|
BS EN 12571:1999
|
Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing |
|
BS EN 14604 : 2005
|
SMOKE ALARM DEVICES |
|
BS EN 14844 : 2006
|
PRECAST CONCRETE PRODUCTS - BOX CULVERTS |
|
BS EN 54-3:2014
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
|
BS EN 13170 : 2012
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
|
BS EN 1036-2 : 2008
|
GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY; PRODUCT STANDARD |
|
BS EN 13693 : 2004
|
PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS |
|
BS EN 15167-1 : 2006
|
GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
BS EN 777-3:2009
|
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety |
|
BS EN 14934:2007 (published 2007-11)
|
Thermal insulation and light weight fill products for civil engineering applications. Factory made products of extruded polystyrene foam (XPS). Specification |
|
BS EN 534 : 2006
|
CORRUGATED BITUMEN SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
|
BS EN 1319:2009
|
Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
|
BS EN 295-6 : 2013
|
VITRIFIED CLAY PIPES SYSTEMS FOR DRAIN AND SEWERS - PART 6: REQUIREMENTS FOR COMPONENTS OF MANHOLES AND INSPECTION CHAMBERS |
|
BS EN 858-1 : 2002
|
SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
|
BS EN 10219-1:2006
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements |
|
BS EN 14179-2 : 2005
|
GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
|
BS EN 13171 : 2012
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
|
BS EN 15250 : 2007
|
SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
|
BS EN 12352:2006
|
Traffic control equipment. Warning and safety light devices |
|
BS EN 295-5 : 2013
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 5: REQUIREMENTS FOR PERFORATED PIPES AND FITTINGS |
|
BS EN 1525 : 1998
|
SAFETY OF INDUSTRIAL TRUCKS - DRIVERLESS TRUCKS AND THEIR SYSTEMS |
|
BS EN 12094-5 : 2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS |
|
98/705686 DC : DRAFT MAR 1998
|
PREN 13135-1 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT |
|
BS EN 1858 : 2008
|
CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
|
BS EN 12676-1 : 2000
|
ANTI-GLARE SYSTEMS FOR ROADS - PART 1: PERFORMANCE AND CHARACTERISTICS |
|
BS EN 1856-2:2009
|
Chimneys. Requirements for metal chimneys Metal flue liners and connecting flue pipes |
|
BS EN 13747 : 2005
|
PRECAST CONCRETE PRODUCTS - FLOOR PLATES FOR FLOOR SYSTEMS |
|
BS EN 10311 : 2005
|
JOINTS FOR THE CONNECTION OF STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS |
|
BS EN 459-1 : 2015
|
BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
BS EN 14710-1 : 2005
|
FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
|
BS EN 681-3 : 2000
|
ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 3: CELLULAR MATERIALS OF VULCANIZED RUBBER |
|
BS EN 14342:2013
|
Wood flooring and parquet. Characteristics, evaluation of conformity and marking |
|
BS EN 777-4:2009
|
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety |
|
BS EN 15102 : 2007
|
DECORATIVE WALL COVERINGS - ROLL AND PANEL FORM |
|
BS EN 1057 : 2006
|
COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
|
BS EN 777-1:2009
|
Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety |
|
BS EN 12094-3 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR MANUAL TRIGGERING AND STOP DEVICES |
|
ISO 10256:2003
|
Head and face protection for use in ice hockey |
|
BS EN 12094-4 : 2004
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 4: REQUIREMENTS AND TEST METHODS FOR CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS |
|
BS EN 12644-2 : 2000
|
CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING |
|
BS EN 1504-6:2006 (published 2006-09)
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Anchoring of reinforcing steel bar |
|
BS EN 12094-11 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR MECHANICAL WEIGHING DEVICES |
|
BS EN 54-2 : 1998
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
|
BS EN 934-2 : 2009
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 2: CONCRETE ADMIXTURES - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
|
BS EN 13240 : 2001
|
ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
|
BS EN 10080:2005
|
Steel for the reinforcement of concrete. Weldable reinforcing steel. General |
|
BS EN 13055-1 : 2002
|
LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
|
BS EN 934-4 : 2009
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
|
BS EN 13084-7:2012 (published 2013-05)
|
Free-standing chimneys Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
|
BS EN 13813 : 2002
|
SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIAL - PROPERTIES AND REQUIREMENTS |
|
BS EN 12094-10 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 10: REQUIREMENTS AND TEST METHODS FOR PRESSURE GAUGES AND PRESSURE SWITCHES |
|
BS EN 13279-1 : 2008
|
GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
|
BS EN 14321-2 : 2005
|
GLASS IN BUILDING - THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
|
BS EN 12094-9 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 9: REQUIREMENTS AND TEST METHODS FOR SPECIAL FIRE DETECTORS |
|
BS EN 1337-7 : 2004
|
STRUCTURAL BEARINGS - PART 7: SPHERICAL AND CYLINDRICAL PTFE BEARINGS |
|
BS EN 12094-1 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS FOR ELECTRICAL AUTOMATIC CONTROL AND DELAY DEVICES |
|
BS EN 671-1 : 2012
|
FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
|
BS EN 14250 : 2010
|
TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
|
BS EN 1051-2 : 2007
|
GLASS IN BUILDING - GLASS BLOCKS AND GLASS PAVERS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
|
BS EN 14889-1 : 2006
|
FIBRES FOR CONCRETE - PART 1: STEEL FIBRES - DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
|
BS EN 12951 : 2004
|
PREFABRICATED ACCESSORIES FOR ROOFING - PERMANENTLY FIXED ROOF LADDERS - PRODUCT SPECIFICATION AND TEST METHODS |
|
BS EN 934-3 : 2009
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
|
BS EN 14080 : 2013
|
TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
|
BS EN 15015 : 2007
|
PLASTICS PIPING SYSTEMS - SYSTEMS FOR HOT AND COLD WATER NOT INTENDED FOR HUMAN CONSUMPTION - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
|
BS EN 13341 : 2005
|
STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
|
BS EN 14449 : 2005
|
GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD |
|
BS EN 12859 : 2011
|
GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
|
BS EN 1317-5 : 2007
|
ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS |
|
BS EN 197-1 : 2011
|
CEMENT - PART 1: COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA FOR COMMON CEMENTS |
|
BS EN 1504-3 : 2005
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
|
BS EN 14843 : 2007
|
PRECAST CONCRETE PRODUCTS - STAIRS |
|
BS EN 295-10 : 2005
|
VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS - PART 10: PERFORMANCE REQUIREMENTS |
|
BS EN 1123-1:1999
|
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Requirements, testing, quality control |
|
EN 14064-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
EN 14964 : 2006
|
RIGID UNDERLAYS FOR DISCONTINUOUS ROOFING - DEFINITIONS AND CHARACTERISTICS |
|
I.S. EN 598:2007
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
|
DIN EN 12094-11:2003-07
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR MECHANICAL WEIGHING DEVICES |
|
EN 1916:2002/AC:2008
|
CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
|
I.S. EN 12094-5:2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS |
|
DIN EN 12094-8:2006-07
|
Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
|
I.S. EN 12094-6:2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6: REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES |
|
I.S. EN 14466:2005
|
FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
|
I.S. EN 14710-1:2005
|
FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
|
DIN EN 12352:2006-07
|
Traffic control equipment - Warning and safety light devices |
|
I.S. EN 12352:2006
|
TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES |
|
I.S. EN 10255:2004
|
NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
|
I.S. EN 12094-8:2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
|
I.S. EN 12644-2:2000
|
CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING |
|
EN 14229 : 2010
|
STRUCTURAL TIMBER - WOOD POLES FOR OVERHEAD LINES |
|
EN 12094-5 : 2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS |
|
EN 13084-7:2012
|
FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS |
|
EN 1337-8 : 2007
|
STRUCTURAL BEARINGS - PART 8: GUIDE BEARINGS AND RESTRAINT BEARINGS |
|
EN 1337-7 : 2004
|
STRUCTURAL BEARINGS - PART 7: SPHERICAL AND CYLINDRICAL PTFE BEARINGS |
|
EN 12352 : 2006
|
TRAFFIC CONTROL EQUIPMENT - WARNING AND SAFETY LIGHT DEVICES |
|
EN 1057:2006+A1:2010 (edition 2)
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
|
EN 12899-4 : 2007
|
FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 4: FACTORY PRODUCTION CONTROL |
|
EN 12571:1998
|
Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing |
|
EN 10088-4 : 2009
|
STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
|
EN 12644-2:2000+A1:2008
|
CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING |
|
EN 10219-1 : 2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
EN 10210-1 : 2006
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS |
|
EN 12899-1:2007 (edition 2)
|
Fixed, vertical road traffic signs - Part 1: Fixed signs |
|
EN 1051-2 : 2007
|
GLASS IN BUILDING - GLASS BLOCKS AND GLASS PAVERS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
|
DIN EN 12094-9:2003-07
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 9: REQUIREMENTS AND TEST METHODS FOR SPECIAL FIRE DETECTORS |
|
EN 12094-11 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 11: REQUIREMENTS AND TEST METHODS FOR MECHANICAL WEIGHING DEVICES |
|
EN 10311 : 2005
|
JOINTS FOR THE CONNECTION OF STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS |
|
EN 13245-2:2008/AC:2009
|
PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES |
|
EN 12899-2:2007
|
Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB) |
|
EN 12273:2008
|
Slurry surfacing - Requirements |
|
EN 13055-1:2002/AC:2004
|
LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
|
EN 12004:2007+A1:2012
|
ADHESIVES FOR TILES - REQUIREMENTS, EVALUATION OF CONFORMITY, CLASSIFICATION AND DESIGNATION |
|
EN 1123-1:1999/A1:2004
|
PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL |
|
EN 1013:2012+A1:2014
|
LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
|
EN 12859:2011
|
GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
|
EN 12271:2006 (edition 2)
|
Surface dressing - Requirements |
|
EN 1090-1:2009+A1:2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS |
|
EN 13341:2005+A1:2011
|
STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
|
EN 13084-5:2005/AC:2006
|
FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS |
|
EN 12094-12 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 12: REQUIREMENTS AND TEST METHODS FOR PNEUMATIC ALARM DEVICES |
|
EN 12951 : 2004
|
PREFABRICATED ACCESSORIES FOR ROOFING - PERMANENTLY FIXED ROOF LADDERS - PRODUCT SPECIFICATION AND TEST METHODS |
|
EN 1319 : 2009
|
DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
|
BS 9999:2008
|
CODE OF PRACTICE FOR FIRE SAFETY IN THE DESIGN, MANAGEMENT AND USE OF BUILDINGS |
|
EN 1337-5 : 2005
|
STRUCTURAL BEARINGS - PART 5: POT BEARINGS |
|
EN 14250:2010
|
TIMBER STRUCTURES - PRODUCT REQUIREMENTS FOR PREFABRICATED STRUCTURAL MEMBERS ASSEMBLED WITH PUNCHED METAL PLATE FASTENERS |
|
EN 12966-1:2005+A1:2009
|
ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD |
|
EN 12094-3 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR MANUAL TRIGGERING AND STOP DEVICES |
|
EN 12094-2 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 2: REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL AUTOMATIC CONTROL AND DELAY DEVICES |
|
EN 12094-8 : 2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS |
|
EN 12101-7 : 2011
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
|
EN 12899-3 : 2007
|
FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 3: DELINEATOR POSTS AND RETROREFLECTORS |
|
EN 12094-10 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 10: REQUIREMENTS AND TEST METHODS FOR PRESSURE GAUGES AND PRESSURE SWITCHES |
|
EN 12094-6 : 2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 6: REQUIREMENTS AND TEST METHODS FOR NON-ELECTRICAL DISABLE DEVICES |
|
EN 10080 : 2005
|
STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL |
|
EN 13135-1:2003+A1:2010
|
CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT |
|
EN 13170:2012+A1:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
|
EN 13063-3 : 2007
|
CHIMNEYS - SYSTEM CHIMNEYS WITH CLAY/CERAMIC FLUE LINERS - PART 3: REQUIREMENTS AND TEST METHODS FOR AIR FLUE SYSTEM CHIMNEYS |
|
DIN EN 12094-3:2003-07
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR MANUAL TRIGGERING AND STOP DEVICES |
|
EN 1036-2 : 2008
|
GLASS IN BUILDING - MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE - PART 2: EVALUATION OF CONFORMITY; PRODUCT STANDARD |
|
EN 1317-5:2007+A2:2012/AC:2012
|
ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS |
|
DIN EN 12094-6:2006-07
|
Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
|
DIN EN 14710-1:2009-06
|
Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements |
|
EN 1463-1 : 2009
|
ROAD MARKING MATERIALS - RETROREFLECTING ROAD STUDS - PART 1: INITIAL PERFORMANCE REQUIREMENTS |
|
EN 12094-1 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR ELECTRICAL AUTOMATIC CONTROL AND DELAY DEVICES |
|
DIN EN 12094-4:2004-10
|
Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004 |
|
EN 10088-5 : 2009
|
STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
|
EN 10343 : 2009
|
STEELS FOR QUENCHING AND TEMPERING FOR CONSTRUCTION PURPOSES - TECHNICAL DELIVERY CONDITIONS |
|
EN 10340:2007/AC:2008
|
STEEL CASTINGS FOR STRUCTURAL USES |
|
EN 12101-8 : 2011
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
|
EN 12839:2012
|
PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
|
EN 12094-4 : 2004
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 4: REQUIREMENTS AND TEST METHODS FOR CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS |
|
DIN EN 12094-5:2006-07
|
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
|
EN 12094-9 : 2003
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 9: REQUIREMENTS AND TEST METHODS FOR SPECIAL FIRE DETECTORS |
|
EN 13279-1:2008
|
GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
|
DIN EN 12094-2:2003-09
|
Fixed firefighting systems - Components for gas extinguishing systems - Part 2: Requirements and test methods for non-electrical automatic control and delay devices; German version EN 12094-2:2003 |
|
EN 50419:2006
|
MARKING OF ELECTRICAL AND ELECTRONIC EQUIPMENT IN ACCORDANCE WITH ARTICLE 11(2) OF DIRECTIVE 2002/96/EC (WEEE) |
|
EN 10255:2004+A1:2007
|
NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
|
EN 54-25:2008/AC:2012
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
|
EN 534:2006+A1:2010
|
CORRUGATED BITUMEN SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
|
EN 54-26 : 2015
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 26: CARBON MONOXIDE DETECTORS - POINT DETECTORS |
|
EN 15286 : 2013
|
AGGLOMERATED STONE - SLABS AND TILES FOR WALL FINISHES (INTERNAL AND EXTERNAL) |
|
EN 40-4:2005/AC:2006
|
LIGHTING COLUMNS - PART 4: REQUIREMENTS FOR REINFORCED AND PRESTRESSED CONCRETE LIGHTING COLUMNS |
|
EN 15368:2008+A1:2010
|
HYDRAULIC BINDER FOR NON-STRUCTURAL APPLICATIONS - DEFINITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
EN 14592:2008+A1:2012
|
Timber structures - Dowel-type fasteners - Requirements |
|
EN ISO 10256 : 2003
|
HEAD AND FACE PROTECTION FOR USE IN ICE HOCKEY |
|
EN 681-4:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS |
|
EN 1504-3 : 2005
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
|
EN 54-23 : 2010
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
|
EN 14991 : 2007
|
PRECAST CONCRETE PRODUCTS - FOUNDATION ELEMENTS |
|
EN 15250 : 2007
|
SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
|
EN 621 : 2009
|
NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
|
EN 14466:2005+A1:2008
|
FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
|
EN 14904 : 2006
|
SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION |
|
EN 14080:2013
|
TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS |
|
EN 13658-2 : 2005
|
METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: EXTERNAL RENDERING |
|
EN 14989-2 : 2007
|
Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 2: Flue and air supply ducts for room sealed appliances |
|
EN 520:2004+A1:2009
|
GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
|
EN 15498 : 2008
|
PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
|
EN 14989-1 : 2007
|
CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR METAL CHIMNEYS AND MATERIAL INDEPENDENT AIR SUPPLY DUCTS FOR ROOMSEALED HEATING APPLICATIONS - PART 1: VERTICAL AIR/FLUE TERMINALS FOR C6-TYPE APPLIANCES |
|
EN 54-3:2014
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 3: FIRE ALARM DEVICES - SOUNDERS |
|
EN 14321-2 : 2005
|
GLASS IN BUILDING - THERMALLY TOUGHENED ALKALINE EARTH SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
|
EN 15283-2:2008+A1:2009
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 2: GYPSUM FIBRE BOARDS |
|
EN 14846 : 2008
|
BUILDING HARDWARE - LOCKS AND LATCHES - ELECTROMECHANICALLY OPERATED LOCKS AND STRIKING PLATES - REQUIREMENTS AND TEST METHODS |
|
EN 681-3:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 3: CELLULAR MATERIALS OF VULCANIZED RUBBER |
|
EN 13171:2012+A1:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
|
EN 14023:2010
|
BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
|
EN 778 : 2009
|
DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
|
EN 295-6:2013
|
VITRIFIED CLAY PIPES SYSTEMS FOR DRAIN AND SEWERS - PART 6: REQUIREMENTS FOR COMPONENTS OF MANHOLES AND INSPECTION CHAMBERS |
|
EN 15037-2:2009+A1:2011
|
PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 2: CONCRETE BLOCKS |
|
EN 15389 : 2008
|
INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS |
|
EN 15037-4:2010+A1:2013
|
PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
|
EN 14889-1 : 2006
|
FIBRES FOR CONCRETE - PART 1: STEEL FIBRES - DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
|
EN 416-1 : 2009
|
SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
|
EN 15015 : 2007
|
PLASTICS PIPING SYSTEMS - SYSTEMS FOR HOT AND COLD WATER NOT INTENDED FOR HUMAN CONSUMPTION - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
|
EN 54-2:1997/A1:2006
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
|
EN 15821 : 2010
|
MULTI-FIRING SAUNA STOVES FIRED BY NATURAL WOOD LOGS - REQUIREMENTS AND TEST METHODS |
|
EN 934-3:2009+A1:2012
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
|
EN 14844:2006+A2:2011
|
PRECAST CONCRETE PRODUCTS - BOX CULVERTS |
|
EN 13693:2004+A1:2009
|
PRECAST CONCRETE PRODUCTS - SPECIAL ROOF ELEMENTS |
|
EN 179 : 2008
|
BUILDING HARDWARE - EMERGENCY EXIT DEVICES OPERATED BY A LEVER HANDLE OR PUSH PAD, FOR USE ON ESCAPE ROUTES - REQUIREMENTS AND TEST METHODS |
|
EN 15743:2010+A1:2015
|
SUPERSULFATED CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
EN 14604:2005/AC:2008
|
SMOKE ALARM DEVICES |
|
EN 15600-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
EN 14934 : 2007
|
THERMAL INSULATION AND LIGHT WEIGHT FILL PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS - FACTORY MADE PRODUCTS OF EXTRUDED POLYSTYRENE FOAM (XPS) - SPECIFICATION |
|
EN 1858:2008+A1:2011
|
CHIMNEYS - COMPONENTS - CONCRETE FLUE BLOCKS |
|
EN 13747:2005+A2:2010 (edition 2)
|
Precast concrete products - Floor plates for floor systems |
|
EN 15285:2008/AC:2008
|
AGGLOMERATED STONE - MODULAR TILES FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
|
EN 295-10 : 2005
|
VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS - PART 10: PERFORMANCE REQUIREMENTS |
|
EN 15037-3:2009+A1:2011
|
PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
|
EN 14710-1:2005+A2:2008
|
FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
|
EN 777-1 : 2009
|
MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
|
EN 14647:2005/AC:2006
|
CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
EN 934-4:2009
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 4: ADMIXTURES FOR GROUT FOR PRESTRESSING TENDONS - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
|
EN 15599-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
EN 598:2007+A1:2009
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |
|
EN 1856-2:2009
|
CHIMNEYS - REQUIREMENTS FOR METAL CHIMNEYS - PART 2: METAL FLUE LINERS AND CONNECTING FLUE PIPES |
|
EN 14566:2008+A1:2009
|
MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
|
EN 295-4:2013
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
|
EN 1504-6:2006
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
|
EN 295-5:2013
|
|
|
EN 197-1:2011 (edition 2)
|
Cement - Part 1: Composition, specifications and conformity criteria for common cements |
|
EN 14992:2007+A1:2012
|
PRECAST CONCRETE PRODUCTS - WALL ELEMENTS |
|
EN 14315-1 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
|
EN 15732 : 2012
|
LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
|
EN 14342:2013
|
WOOD FLOORING AND PARQUET - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
|
EN 671-2:2012
|
FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE |
|
EN 15167-1 : 2006
|
GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
EN 15050:2007+A1:2012
|
PRECAST CONCRETE PRODUCTS - BRIDGE ELEMENTS |
|
EN 13658-1 : 2005
|
METAL LATH AND BEADS - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: INTERNAL PLASTERING |
|
EN 14889-2 : 2006
|
FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITIONS, SPECIFICATIONS AND CONFORMITY |
|
EN 14179-2 : 2005
|
GLASS IN BUILDING - HEAT SOAKED THERMALLY TOUGHENED SODA LIME SILICATE SAFETY GLASS - PART 2: EVALUATION OF CONFORMITY/PRODUCT STANDARD |
|
EN 777-4 : 2009
|
MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
|
EN 295-1:2013
|
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND JOINTS |
|
EN 681-2:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
|
EN 16327 : 2014
|
FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
|
BS 5655-6:2011
|
LIFTS AND SERVICE LIFTS - PART 6: CODE OF PRACTICE FOR THE SELECTION, INSTALLATION AND LOCATION OF NEW LIFTS |
|
EN 14318-1 : 2013
|
THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
|
EN 934-5 : 2007
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 5: ADMIXTURES FOR SPRAYED CONCRETE - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
|
EN 13813 : 2002
|
SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIAL - PROPERTIES AND REQUIREMENTS |
|
EN 459-1:2015
|
BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA |
|
EN 671-1:2012
|
FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
|
EN 14843 : 2007
|
PRECAST CONCRETE PRODUCTS - STAIRS |
|
EN 1825-1:2004/AC:2006
|
GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
|
EN 15650 : 2010
|
VENTILATION FOR BUILDINGS - FIRE DAMPERS |
|
EN 13240:2001/A2:2004/AC:2007
|
ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
|
EN 15283-1:2008+A1:2009
|
GYPSUM BOARDS WITH FIBROUS REINFORCEMENT - DEFINITIONS, REQUIREMENTS AND TEST METHODS - PART 1: GYPSUM BOARDS WITH MAT REINFORCEMENT |
|
EN 14449:2005/AC:2005
|
GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - EVALUATION OF CONFORMITY/PRODUCT STANDARD |
|
EN 544:2011
|
BITUMEN SHINGLES WITH MINERAL AND/OR SYNTHETIC REINFORCEMENTS - PRODUCT SPECIFICATION AND TEST METHODS |
|
UNI EN 14466 : 2008
|
FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
|
BS 7083:1996
|
GUIDE TO THE ACCOMMODATION AND OPERATING ENVIRONMENT FOR INFORMATION TECHNOLOGY (IT) EQUIPMENT |
|
UNI EN 12644-2 : 2008
|
CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING |
|
UNI EN 598 : 2009
|
DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS |