98/232755 DC : DRAFT DEC 1998
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
IEC 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
Withdrawn date
03-01-2016
Published date
23-11-2012
Publisher
IEC 61936-1
| Committee |
PEL/99
|
| DocumentType |
Draft
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| HD 367 : 200S2 | ON-LOAD TAP-CHANGERS |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60255-3:1989 | Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time |
| HD 622 S1:1996/A2:2005 | Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations |
| IEC 60826:2017 | Design criteria of overhead transmission lines |
| IEC 60986:2000+AMD1:2008 CSV | Short-circuit temperature limits of electric cables with rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| HD 464 : S1 AMD 5 2002 | DRY-TYPE POWER TRANSFORMERS |
| IEC 60724:2000+AMD1:2008 CSV | Short-circuit temperature limits of electric cables with rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
| HD 405.1 : S1 AMD 1 | TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS - TEST ON A SINGLE VERTICAL INSULATED WIRE OR CABLE |
| IEC 60502:1994 | Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV |
| HD 448 : 200S4 | COMMON CLAUSES FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| HD 597 S1:1992/corrigendum:1992 | COUPLING CAPACITORS AND CAPACITOR DIVIDERS |
| IEC 60214:1989 | On-load tap-changers |
| HD 481.1 : 200S1 | ELECTROMAGNETIC COMPATIBILITY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT - GENERAL INTRODUCTION |
| IEC 60478-1:1974 | Stabilized power supplies, d.c. output. Part 1: Terms and definitions |
| HD 620 : 2010 | DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV |
| HD 405.2 : 200S1 | TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS - TEST ON A SINGLE SMALL VERTICAL INSULATED COPPER WIRE OR CABLE |
| IEC 60949:1988 | Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects |
| HD 364 : 200S2 | HIGH-VOLTAGE CABLE PLUG AND SOCKET CONNECTIONS FOR MEDICAL X-RAY EQUIPMENT |
| IEC 60470:1999 | High-voltage alternating current contactors and contactor-based motor-starters |
| IEC 60056:1987 | High-voltage alternating-current circuit-breakers |
| IEC 60353:1989 | Line traps for a.c. power systems |
| HD 398.1 : 200S1 | POWER TRANSFORMERS - GENERAL |
| HD 478.2.1 : 200S1 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - TEMPERATURE AND HUMIDITY |
| IEC 60376:2005 | Specification of technical grade sulfur hexafluoride (SF<sub>6</sub>) for use in electrical equipment |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| IEC 60044-3:2002 | Instrument transformers - Part 3: Combined transformers |
| IEC 60354:1991 | Loading guide for oil-immersed power transformers |
| HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
| HD 187 : 200S5 | A.C METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
| IEC 60517:1990 | Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
| IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
| HD 506 : S1 AMD 1 | |
| IEC 60721-2-1:2013 | Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| HD 358 : 200S3 | GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES OF 72.5 kV AND ABOVE |
| IEC TR 60865-2:2015 | Short-circuit currents - Calculation of effects - Part 2: Examples of calculation |
| IEC 60044-6:1992 | Instrument transformers - Part 6: Requirements for protective current transformers for transient performance |
| IEC 61330:1995 | High-voltage/low voltage prefabricated substations |
| IEC 60801-1:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment. Part 1: General introduction |
| IEC 60291:1969 | Fuse definitions |
| IEC 60076:1967 | Power transformers |
| IEC 60940:2015 | Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression |
| IEC 60273:1990 | Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V |
| IEC 60183:2015 | Guidance for the selection of high-voltage A.C. cable systems |
| HD 348 : 200S7 | HIGH-VOLTAGE ALTERNATING-CURRENT CIRCUIT-BREAKERS |
| IEC 60478-2:1986 | Stabilized power supplies, d.c. output. Part 2: Rating and performance |
| HD 355.1 : 200S3 | HIGH VOLTAGE SWITCHES - HIGH-VOLTAGE SWITCHES FOR RATED VOLTAGES ABOVE 1 KV AND LESS THAN 52 KV |
| IEC 60909:1988 | Short-circuit current calculation in three-phase a.c. systems |
| IEC 60905:1987 | Loading guide for dry-type power transformers |
| IEC 60071-2:1996 | Insulation co-ordination - Part 2: Application guide |
| IEC 60186:1987 | Voltage transformers |
| HD 602 : 200S1 | TEST ON GASES EVOLVED DURING COMBUSTION OF ELECTRIC CABLES - DETERMINATION OF DEGREE OF ACIDITY OF GASES EVOLVED DURING THE COMBUSTION OF MATERIALS TAKEN FROM ELECTRIC CABLES BY MEASURING PH CONDUCTIVITY |
| HD 405.3 : 200S1 | TESTS OF ELECTRIC CABLES UNDER FIRE CONDITIONS - TESTS ON BUNCHED WIRES OR CABLES |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60331:1970 | Fire-resisting characteristics of electric cables |
| HD 604 S1:1994/A3:2005 | 0.6/1 KV POWER CABLES WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS |
| HD 548.3 : 200S1 | INSTRUMENT TRANSFORMERS - COMBINED TRANSFORMERS |
| IEC 60089:1957 | Recommendations for the characteristics of audio-apparatus to be specified for application purposes |
| IEC 60298:1990 | A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| HD 246.2 : 200S1 | DIAGRAMS, CHARTS, TABLES - ITEM DESIGNATION |
| HD 621 S1:1996/A1:2001 | MV IMPREGNATED PAPER INSULATED DISTRIBUTION CABLES OF RATED VOLTAGES OF 3.8/6.6 KV TO 19/33 KV |
| HD 533 : 200S1 | SHORT-CIRCUIT CALCULATION IN THREE-PHASE A.C. SYSTEMS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.