|
SAE AMS 5645 : 2016
|
STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
|
SAE AMS QQ A 225/9 : 2014
|
ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
|
SAE AS 611F : 2010
|
HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR |
|
SAE AMS QQ P 416 : 2016
|
PLATING, CADMIUM (ELECTRODEPOSITED) |
|
SAE AMS 4133 : 2014
|
ALUMINUM ALLOY FORGINGS AND ROLLED RINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AMS 6382 : 2014
|
STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED |
|
SAE AMS 4141 : 2014
|
ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
|
ASME B46.1 : 2009
|
SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
|
SAE AMS 5648 : 2016
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED |
|
SAE AS 4843/2 : 2016
|
FITTINGS, BEADED TO PIPE THREADED, FLUID CONNECTION |
|
SAE AMS QQ A 367 : 2012
|
ALUMINUM ALLOY FORGINGS |
|
MIL-DTL-83488 Revision D:1999
|
COATING, ALUMINUM, HIGH PURITY |
|
SAE AMS QQ S 763D : 2013(S2015)
|
STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
|
SAE AS 5201 : 2013
|
FITTING END, EXTERNAL TAPER PIPE THREAD, DESIGN STANDARD |
|
SAE ARP 1590 : 2014
|
RECOMMENDED PART NUMBERING GUIDELINES FOR FLUID SYSTEM COMPONENTS INCH SYSTEM OF MEASUREMENTS |
|
SAE AS 5185 : 2015
|
FITTING, ELBOW, 90 DEGREES, PIPE TO HOSE |
|
SAE AS 71051 : 2015
|
PIPE THREADS, TAPER, AERONAUTICAL NATIONAL FORM, SYMBOL ANPT - DESIGN AND INSPECTION STANDARD |
|
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
|
SAE AMS 2472 : 2014
|
ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED COATING |
|
SAE AMS 2700E : 2011
|
PASSIVATION OF CORROSION RESISTANT STEELS |
|
SAE AMS 5639 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
|
SAE AMS 6370 : 2016
|
STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
|
SAE AS 5132 : 2015
|
FITTING END - HOSE CONNECTION, DESIGN STANDARD |
|
SAE AMS QQ A 225/6 : 1998
|
ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED |
|
SAE AMS 4339 : 2004
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
|
SAE AMS S 6758 : 2013
|
STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
|
SAE AMS 4124 : 2012
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |