ANSI Z87.1 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
OCCUPATIONAL AND EDUCATIONAL PERSONAL EYE AND FACE PROTECTION DEVICES
Available format(s)
Hardcopy , PDF
Superseded date
18-04-2020
Language(s)
English
Published date
01-01-2015
Publisher
Foreword
1 Preface
2 Scope, Purpose, Application, and Interpretations
3 Definitions
4 Normative References
5 General Requirements
6 Impact Protector Requirements
7 Optical Radiation Protector Requirements
8 Droplet and Splash, Dust, and Fine Dust Protector
Requirements
9 Test Methods
10 Instructions, Use and Maintenance
Annexes
Annex A - Samples for Testing (normative)
Annex B - Reference Headforms (normative)
Annex C - Spectral Factor Tables (normative)
Annex D - Lateral (Side) Coverage Illustration
(Medium Headform) (informative)
Annex E - Test Apparatus (informative)
Annex F - Calibration of Test Telescope (informative)
Annex G - Illustrations to Aid in Refractive Power,
Astigmatism and Resolving Power Testing
(informative)
Annex H - Sources for Test Apparatus (informative)
Annex I - Resource Publications (informative)
Annex J - Eye and Face Selection Guide (informative)
Annex K - Hazard Assessment and Protector Selection
(informative)
Annex L - Examples of Protector Markings (informative)
Provides criteria related to the general requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries from such hazards as impact, non-ionizing radiation and liquid splash exposures in occupational and educational environments including, but not limited to, machinery operations, material welding and cutting, chemical handling, and assembly operations.
| DevelopmentNote |
Supersedes A A 1110 (B) and A A 1813 (A) (05/2000) Supersedes A A 1995 (04/2003) Supersedes A A 1994 and A A 1996. (05/2003) Supersedes GG G 531 Supersedes GGG H 211. Supersedes L F 36. (05/2004)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
Safety Equipment Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| AWS A5.4 : 92(R2000) | STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING, SPECIFICATION FOR |
| NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
| AIHA Z9.1 : 2006 | VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS |
| AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
| AWS BRH:2007 | BRAZING HANDBOOK |
| AWS C7.1M/C7.1 : 2013 | RECOMMENDED PRACTICES FOR ELECTRON BEAM WELDING AND ALLIED PROCESSES |
| ASTM C 945 : 2005 : R2012 | Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels |
| AIHA Z9.6 : 2008 | EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING |
| ASTM F 803 : 2014 : REDLINE | Standard Specification for Eye Protectors for Selected Sports |
| ASTM F 2940 : 2013 | Standard Practice for Air Soft Field Operation |
| AWS WHC2.08 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 8: ELECTROGAS WELDING |
| AWS WHC2.12 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 12: BRAZING |
| AWS D14.1/D14.1M:2005 | SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT |
| AWS D1.4/D1.4M : 2011 | STRUCTURAL WELDING CODE - REINFORCING STEEL |
| AWS WHB.3.9 : 2007 | WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3 |
| AWS A5.22 : 1995 | SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR FLUX CORED ARC WELDING AND STAINLESS STEEL FLUX CORED RODS FOR GAS TUNGSTEN ARC WELDING |
| AWS C1.1M/C1.1 : 2012 | RECOMMENDED PRACTICES FOR RESISTANCE WELDING |
| ISO 28902-1:2012 | Air quality — Environmental meteorology — Part 1: Ground-based remote sensing of visual range by lidar |
| UNI EN ISO 9241-303 : 2012 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 303: REQUIREMENTS FOR ELECTRONIC VISUAL DISPLAYS |
| ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
| ASTM E 848 : 1994 : R2000 | Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates |
| ASTM E 848 : 1994 : R2016 | Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates |
| NFPA 1977 : 2016 | PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING |
| ASME B107.410 : 2008 | STRUCK TOOLS |
| ASME B107.400 : 2008 | Striking Tools (B107.400 - 2008) |
| API 76 REDLINE : 2007 | CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| ANSI O2.1 : 1983 | SAWMILLS - SAFETY REQUIREMENTS FOR |
| AIHA Z9.3 : 2007 | SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION |
| NFPA 197 : 2018 | Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting |
| ASTM F 2039 : 2000 | Standard Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program |
| GGG-H-211 Revision D:1985 | HELMETS, WELDERS'; HANDSHIELD, WELDING; AND PLATES, WELDING |
| API 54 RUSSIAN : 19991 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| AAMI TIR67 : 2018 | PROMOTING SAFE PRACTICES PERTAINING TO THE USE OF STERILANT AND DISINFECTANT CHEMICALS IN HEALTH CARE FACILITIES |
| BS ISO 18930:2011 | Imaging materials. Pictorial colour reflection prints. Methods for evaluating image stability under outdoor conditions |
| MIL-STD-1220 Revision B:1991 | MISCELLANEOUS ALCOHOLS AND AMINES, TECHNICAL GRADE |
| AIHA Z9.4 : 2011 | ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES |
| AWS D14.3/D14.3M : 2010 | SPECIFICATION FOR WELDING EARTHMOVING, CONSTRUCTION, AND AGRICULTURAL EQUIPMENT |
| MIL-DTL-43511 Revision D:2006 | VISORS, FLYER'S HELMET, POLYCARBONATE |
| A-A-1770 Revision A:1993 | FACESHIELD, INDUSTRIAL |
| A-A-55202 Revision A:1996 | Helmet, Fireman\'s (No S/S Document) |
| MIL-STD-1202 Revision A:1988 | FACESHIELD, INDUSTRIAL |
| A-A-1110 Revision B:1997 | GOGGLES, INDUSTRIAL, PLASTIC |
| ANSI/ASSP A10.9-2013(R2018) | SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS |
| ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 1851 : 2014 | SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR STRUCTURAL FIRE FIGHTING AND PROXIMITY FIRE FIGHTING |
| API 76 : 2007 : R2013 | CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| API 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| ANSI/ASSE A10.16 : 2009 | SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS |
| API RP 76 : 2007 | CONTRACTOR SAFETY MANAGEMENT FOR OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| NFPA 1972 : 1992 | HELMETS FOR STRUCTURAL FIRE FIGHTING |
| ANSI B165.1 : 2013 | POWER TOOLS - POWER-DRIVEN BRUSHING TOOLS - SAFETY REQUIREMENTS FOR DESIGN, CARE, AND USE |
| SAE ARP 6161 : 2011 | FLIGHT COMPARTMENT GLARE |
| NFPA 1992 : 2018 | LIQUID SPLASH-PROTECTIVE ENSEMBLES AND CLOTHING FOR HAZARDOUS MATERIALS EMERGENCIES |
| ASTM F 1703 : 2013 : REDLINE | Standard Guide for Skating and Ice Hockey Playing Facilities |
| ASTM F 3077 : 2017 : REDLINE | Standard Specification for Eye Protectors for Women’s Lacrosse |
| ANSI/ASSP Z9.10 : 2017 | FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES |
| UFC 3-420-01 : Change 10 | UNIFIED FACILITIES CRITERIA - PLUMBING SYSTEMS |
| ANSI/ASSE A10.15 : 1995 : R2005 | SAFETY REQUIREMENTS FOR DREDGING |
| ANSI/ASSE A10.15 : 1995 : R2011 | SAFETY REQUIREMENTS FOR DREDGING |
| NFPA 1855 : 2018 | SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| AWS D14.4/D14.4M : 2012 | SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT |
| DIN ISO 28902-1 E : 2012 | AIR QUALITY - ENVIRONMENTAL METEOROLOGY - PART 1: GROUND-BASED REMOTE SENSING OF VISUAL RANGE BY LIDAR (ISO 28902-1:2012) |
| AWS WHC2.10 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 10: ELECTROSLAG WELDING |
| MIL-H-1987 Revision G:1980 | HELMET, FIRE FIGHTERS |
| API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| ASTM E 848 : 1994 : R2006 | Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates |
| 09/30165797 DC : 0 | BS EN 60601-2-57 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE |
| ASTM E 2770 : 2017 : REDLINE | Standard Guide for Operational Guidelines for Initial Response to Suspected Biological Agents and Toxins |
| DIN ISO 28902-1:2012-06 | Air quality - Environmental meteorology - Part 1: Ground-based remote sensing of visual range by lidar (ISO 28902-1:2012) |
| AIHA Z9.1 : 2006 | VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS |
| ASTM C 945 : 2005 : R2017 | Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels |
| ASTM C 945 : 2005 | Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels |
| 10/30215313 DC : 0 | BS ISO 18930 - IMAGING MATERIALS - PICTORIAL COLOUR REFLECTION PRINTS - METHODS FOR EVALUATING IMAGE STABILITY UNDER OUTDOOR CONDITIONS |
| MIL-B-44315 Base Document:1987 | Body Armor, Chest Plate and Face Shield, Explosive Ordnance Disposal (No S/S Document) |
| A-A-1994 Revision A:1998 | HELMET AND HANDHELD SHIELD, WELDERS |
| MIL-STD-1208 Revision B:1991 | INORGANIC SODIUM SALTS AND COMPOUNDS, TECHNICAL GRADE |
| ANSI Z245.41 : 2015 | FACILITIES FOR THE PROCESSING OF COMMINGLED RECYCLABLE MATERIALS - SAFETY REQUIREMENTS |
| NFPA 57 : 2002 | LIQUEFIED NATURAL GAS (LNG) VEHICULAR FUEL SYSTEMS CODE |
| ASTM F 2039 : 2000 : R2006 | Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
| NFPA 1991 : 2016 | Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies |
| AWS C5.7 : 2000 | RECOMMENDED PRACTICES FOR ELECTROGAS WELDING |
| AEP-4495 : 2016 | GUIDANCE FOR THE PROCUREMENT OF LASER EYE PROTECTION (LEP) FOR THE INDIVIDUAL MILITARY USER |
| AWS WHC2.03 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 3: GAS TUNGSTEN ARC WELDING |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| AIHA Z9.6 : 2008 | EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING |
| ANSI/ASSE A10.47 : 2015 | WORK ZONE SAFETY FOR HIGHWAY CONSTRUCTION |
| ANSI A10.16 REDLINE : 2009 | COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009) |
| ASTM E 2458 : 2017 : REDLINE | Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces |
| NASA STD 8719.12 : 2010 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
| AIHA Z9.10 : 2010 | FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES |
| OPEI B175.4 : 2013 | OUTDOOR POWER EQUIPMENT - PORTABLE, HANDHELD, INTERNAL COMBUSTION ENGINE-POWERED CUT-OFF MACHINES - SAFETY AND ENVIRONMENTAL REQUIREMENTS |
| ANSI B165.2 : 1987 | POWER TOOLS - POWER DRIVEN BRUSHING TOOLS CONSTRUCTED WITH WOOD, PLASTIC, OR COMPOSITION HUBS AND CORES - SAFETY REQUIREMENTS FOR THE DESIGN, CARE, AND USE, |
| ANSI L1.1 : 1981 | SAFETY AND HEALTH REQUIREMENTS FOR THE TEXTILE INDUSTRY, |
| ASTM F 2941 : 2013 | Standard Practice for Air Soft Player Safety Briefing |
| AWS F2.3M : 2011 | SPECIFICATION FOR USE AND PERFORMANCE OF TRANSPARENT WELDING CURTAINS AND SCREENS |
| ASTM F 2812 : 2012 | Standard Specification for Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports |
| PD ISO/TS 16976-8:2013 | Respiratory protective devices. Human factors Ergonomic factors |
| ANSI B11.7 : 1995 | COLD HEADERS AND COLD FORMERS - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE |
| API RP 1646 : 2017 | SAFE WORKING PRACTICES FOR CONTRACTORS WORKING AT RETAIL PETROLEUM/CONVENIENCE FACILITIES |
| NFPA 1500 : 2018 | FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM |
| ANSI B11.9:2010 | SAFETY REQUIREMENTS FOR GRINDING MACHINES |
| SAE J 2967 : 2013 | READY MIXED CONCRETE TRUCK RECOMMENDED PRACTICE |
| ANSI B24.1 : 1985 | FORGING MACHINERY, SAFETY REQUIREMENTS FOR, |
| ANSI B11.9 : 2010(R2015) | SAFETY REQUIREMENTS FOR GRINDING MACHINES |
| ANSI SNT 101 : 2015 | SAFETY REQUIREMENTS FOR PORTABLE COMPRESSED - AIR - ACTUATED FASTENER DRIVING TOOLS |
| DIN EN ISO 9241-303:2012-03 | Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays (ISO 9241-303:2011) |
| ASTM F 1776 : 2016-11 | SPECIFICATION FOR EYE PROTECTIVE DEVICES FOR PAINTBALL SPORTS |
| AWS C7.3 : 2016 | PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING |
| API 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| ASTM E 2501 : 2011 : R2017 | Standard Specification for Light Source Products for Inspection of Fluorescent Coatings |
| NFPA 1994 : 2018 | PROTECTIVE ENSEMBLES FOR FIRST RESPONDERS TO HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS |
| API 54 :1999 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| ANSI/ASSP A10.9:2013 | SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS |
| AWS D1.6 : 1999 ERRATA 1999 | STRUCTURAL WELDING CODE - STAINLESS STEEL |
| ISO 18930:2011 | Imaging materials Pictorial colour reflection prints Methods for evaluating image stability under outdoor conditions |
| ANSI A10.16 REDLINE : 2009 | COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009) |
| ANSI A10.24 : 2014 | ROOFING - SAFETY REQUIREMENTS FOR LOW-SLOPED ROOFS |
| API 54 : 1999 : R2013 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| AIHA Z9.3 : 2007 | SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION |
| ANSI/ASSP Z9.1 : 2016 | VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS |
| ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| ANSI A10.3 : 2013 | SAFETY REQUIREMENTS FOR POWDER-ACTUATED FASTENING SYSTEMS |
| ANSI Z80.5 : 2010 | OPHTHALMICS - REQUIREMENTS FOR OPHTHALMIC FRAMES |
| I.S. EN ISO 9241-303:2011 | ERGONOMICS OF HUMAN-SYSTEM INTERACTION - PART 303: REQUIREMENTS FOR ELECTRONIC VISUAL DISPLAYS (ISO 9241-303:2011) |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| ISO 9241-303:2011 | Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays |
| EN ISO 9241-303:2011 | Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays (ISO 9241-303:2011) |
| FAA 3900.69 : 2016 | FLIGHT STANDARDS SERVICE AIRCRAFT ACCIDENT INVESTIGATION SAFETY PROGRAM |
| 10/30197237 DC : 0 | BS ISO 28902 - AIR QUALITY - ENVIRONMENTAL METEOROLOGY - GROUND-BASED REMOTE SENSING OF VISUAL RANGE |
| GG-G-531 Revision C:1978 | GOGGLES, INDUSTRIAL AND SPECTACLES, INDUSTRIAL, PLASTIC |
| AWS TSS : 1985 | THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
| AIHA Z9.4 : 2011 | ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES |
| ASTM F 2941 : 2013 : R2017 | Standard Practice for Air Soft Player Safety Briefing |
| API 54 RUSSIAN : 1999 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| MIL-STD-606 Revision A:1988 | HELMET WELDERS; SHIELD, WELDING, HAND HELD, AND LENSES, HELMET |
| CSA Z94.3 : 2015 | EYE AND FACE PROTECTORS |
| AWS C7.2 : 1998 | RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING AND DRILLING |
| MIL-STD-1217 Revision C:1991 | ORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE |
| BS EN ISO 9241-303:2011 | Ergonomics of human-system interaction Requirements for electronic visual displays |
| ANSI B152.2 : 1982 | AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR THE CONSTRUCTION, CARE AND USE OF PERMANENT-MOLD CASTING MACHINES (OTHER THAN GRAY IRON) |
| ANSI Z80.31 : 2017 | OPHTHALMIC OPTICS - SPECIFICATIONS FOR READY-TO-WEAR NEAR-VISION SPECTACLES |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| MIL-STD-1434 Revision A:1988 | GOGGLES, (METRIC) |
| MIL PRF 44366 : D | SPECTACLES, PROTECTIVE, LASER, BALLISTIC (BLPS) |
| DOD-G-51510 Base Document:1985 | GOGGLES, INDUSTRIAL, EYECUP AND LENSES, GOGGLES, INDUSTRIAL (METRIC) |
| ASTM E 2501 :2011 | Standard Specification for Light Source Products for Inspection of Fluorescent Coatings |
| ANSI B169.1 : 1990 | SAFETY REQUIREMENTS FOR THE CONSTRUCTION, CARE, AND USE OF MACHINERY USED IN ENVELOPE MANUFACTURING |
| AWS C5.3 : 2000 | RECOMMENDED PRACTICES FOR AIR CARBON ARC GOUGING AND CUTTING |
| NFPA 1951 : 2013 | PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
| ASTM F 2039 : 2000 : R2012 | Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
| ANSI Z80.1 : 2015 | OPHTHALMICS - PRESCRIPTION OPHTHALMIC LENSES - RECOMMENDATIONS |
| AWS D10.11M/D10.11:2007 | GUIDE FOR ROOT PASS WELDING OF PIPE WITHOUT BACKING |
| AWS D10.6/D10.6M : 2000 | RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING OF TITANIUM PIPING AND TUBING |
| AWS C5.4 : 1993 | RECOMMENDED PRACTICES FOR STUD WELDING |
| AWS WHC2.02 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 2: SHIELDED METAL ARC WELDING |
| AWS A5.9 : 93(R1999) | BARE STAINLESS STEEL WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
| AWS EG4.0 : 1996 | GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 3, EXPERT WELDER |
| AWS A5.10 : 1992 | BARE ALUMINUM AND ALUMINUM ALLOY WELDING ELECTRODES AND RODS, SPECIFICATION FOR |
| ASTM F 2039 : 2000 : R2018 | Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
| ANSI/ASSE A10.16 : 2009 | SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS |
| ASTM F 2940 : 2013 : R2017 | Standard Practice for Air Soft Field Operation |
| ASTM E 848 : 1994 : R2012 | Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates |
| ASME PASE : 2014 | SAFETY STANDARD FOR PORTABLE AUTOMOTIVE SERVICE EQUIPMENT |
| ANSI Z80.1 : 2015 | OPHTHALMICS - PRESCRIPTION OPHTHALMIC LENSES - RECOMMENDATIONS |
| EN 168:2001 | Personal eye-protection - Non-optical test methods |
| ANSI Z80.3 : 2015 | OPHTHALMICS - NONPRESCRIPTION SUNGLASS AND FASHION EYEWEAR REQUIREMENTS |
| ASTM D 1003 : 2013 : REDLINE | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ANSI Z80.5 : 2010 | OPHTHALMICS - REQUIREMENTS FOR OPHTHALMIC FRAMES |
£50.09
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.