AOP 20 : 2017
Current
Current
The latest, up-to-date edition.
SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
27-02-2017
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
ANNEX A - MECHANICAL SHOCK TESTS
ANNEX B - VIBRATION TESTS
ANNEX C - CLIMATIC TESTS
ANNEX D - SAFETY, ARMING AND FUNCTIONING TESTS
ANNEX E - AIRCRAFT MUNITION TESTS
ANNEX F - ELECTRICAL AND ELECTROMAGNETIC INFLUENCE TESTS
ANNEX G - STATISTICAL METHODS TO DETERMINE THE INITIATION
PROBABILITY OF ONE-SHOT DEVICES
Pertains to all Safe, Arming and Functioning Systems (SAF Systems), including Fuzes, Fuzing Systems, Ignition Systems, as well as components of weapon systems serving a Fuzing or Ignition function, such as torpedo exploders, underwater mine-firing mechanisms, and solid propellant rocket and guided missile motor ignition.
| DocumentType |
Standard
|
| Pages |
228
|
| PublisherName |
NATO
|
| Status |
Current
|
| Supersedes |
| STANAG 4518 : 0 | DEMILITARIZATION AND DISPOSAL OF MUNITIONS, PRINCIPLES FOR DESIGN FEATURES AND ASSESSMENT |
| DEFSTAN 59-114(PT2)/1(2012) : 2012 | SAFETY PRINCIPLES FOR ELECTRICAL CIRCUITS IN SYSTEMS INCORPORATING EXPLOSIVE COMPONENTS - PART 2: ELECTRO-EXPLOSIVE DEVICES AND THEIR CHARACTERIZATION |
| AAS3P-1 : 2011 | ALLIED AMMUNITION SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING PUBLICATION - GUIDANCE |
| AAS3P-20 : 2017 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING OF LARGE CALIBER AMMUNITION GREATER THAN 40MM |
| AOP 39 : 2010 | GUIDANCE ON THE ASSESSMENT AND DEVELOPMENT OF INSENSITIVE MUNITIONS (IM) |
| STANAG 4560 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - AOP-43 EDITION 3 |
| MIL-STD-1316 Revision F:2017 | Fuze Design, Safety Criteria for |
| STANAG 4187 : 2007 | FUZING SYSTEMS - SAFETY DESIGN REQUIREMENTS |
| STANAG 4599 : 2007 | WEAPON LAUNCHED GRENADE SYSTEMS, DESIGN SAFETY REQUIREMENTS AND SAFETY AND SUITABILITY FOR SERVICE EVALUATION |
| STANAG 4516 : 0 | CANNON (12.7 TO 40MM), DESIGN SAFETY REQUIREMENTS AND SAFETY AND SUITABILITY FOR SERVICE EVALUATION |
| AAS3P-12 : 2017 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR AIRCRAFT LAUNCHED MUNITIONS |
| STANAG 4497 : 2016 | HAND-EMPLACED MUNITIONS (HEM), PRINCIPLES FOR SAFE DESIGN |
| AAS3P-11 : 2017 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SURFACE AND UNDERWATER LAUNCHED MUNITIONS |
| STANAG 4368 : 2011 | IGNITION SYSTEMS FOR ROCKET AND GUIDED MISSILE MOTORS, SAFETY DESIGN REQUIREMENTS |
| AAS3P-10 : 2011 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS |
| AOP 38 : 2006 | SPECIALIST GLOSSARY OF TERMS AND DEFINITIONS ON AMMUNITION SAFETY |
| STANAG 4297 : 0 | GUIDANCE ON THE ASSESSMENT OF THE SAFETY AND SUITABILITY FOR SERVICE OF MUNITIONS FOR NATO ARMED FORCES - AOP-15 |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| MIL-HDBK-505 Base Document:1998 | DEFINITIONS OF ITEM LEVELS, ITEM EXCHANGEABILITY, MODELS, AND RELATED TERMS |
| STANAG 4224 : 2007 | LARGE CALIBRE ARTILLERY AND NAVAL GUN AMMUNITION GREATER THAN 40 MM, SAFETY AND SUITABILITY FOR SERVICE EVALUATION |
| MIL-HDBK-1512 Base Document:1997 | ELECTROEXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHODS |
| AECTP-400 : 2006 | MECHANICAL ENVIRONMENTAL TESTS |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| STANAG 4187 : 2007 | FUZING SYSTEMS - SAFETY DESIGN REQUIREMENTS |
| MIL-DTL-12560 Revision K:2013 | ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING) |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-167-2 Revision A:1992 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (RECIPROCATING MACHINERY AND PROPULSION SYSTEM AND SHAFTING) TYPES III, IV, AND V (CONTROLLED DISTRIBUTION) |
| STANAG 4157 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS (SAF SYSTEMS) TESTING REQUIREMENTS |
| AOP 42 : 2009 | INTEGRATED DESIGN ANALYSIS FOR MUNITION INITIATION AND OTHER SAFETY CRITICAL SYSTEMS |
| STANAG 4629 : 2011 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING OF NON-NUCLEAR MUNITIONS |
| SAE AMS 6385 : 2015 | STEEL SHEET, STRIP, AND PLATE, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.27 - 0.33C) |
| MIL-STD-1316 Revision F:2017 | Fuze Design, Safety Criteria for |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| STANAG 4382 : 2003 | SLOW HEATING, MUNITIONS TEST PROCEDURES |
| AOP 21 : 2016 | INITIATION SYSTEMS: CHARACTERISATION AND SAFETY TEST METHODS AND PROCEDURES FOR DETONATING EXPLOSIVE COMPONENTS |
| ASTM B 124 : 2008 | SPECIFICATION FOR COPPER AND COPPER ALLOY FORGING ROD, BAR AND SHAPES |
| STANAG 4241 : 2003 | BULLET IMPACT, MUNITION TEST PROCEDURES |
| ASTM B 121/B121M : 2016 : REDLINE | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| AECTP-500 : 2016 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
| STANAG 4363 : 2016 | INITIATION SYSTEMS: TESTING FOR THE ASSESSMENT OF DETONATING EXPLOSIVE COMPONENTS - AOP-21 EDITION 3 |
| AECTP-600 : 2007 | THE TEN STEP METHOD FOR EVALUATING THE ABILITY OF MATERIEL TO MEET EXTENDED LIFE REQUIREMENTS AND ROLE AND DEPLOYMENT CHANGES |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| AOP 7 : 2006 | MANUAL OF DATA REQUIREMENTS AND TESTS FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE |
| MIL-DTL-23659 Revision F:2010 | Initiators, Electric, General Design Specification for |
| AECTP-100 : 2016 | ENVIRONMENTAL GUIDELINES FOR DEFENCE MATERIEL |
| STANAG 4497 : 2016 | HAND-EMPLACED MUNITIONS (HEM), PRINCIPLES FOR SAFE DESIGN |
| STANAG 4170 : 2008 | PRINCIPLES AND METHODOLOGY FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE |
| STANAG 4370 : 2016 | ENVIRONMENTAL TESTING |
| STANAG 4368 : 2011 | IGNITION SYSTEMS FOR ROCKET AND GUIDED MISSILE MOTORS, SAFETY DESIGN REQUIREMENTS |
| STANAG 4375 : 2010 | SAFETY DROP, MUNITION TEST PROCEDURE |
| STANAG 4240 : 2003 | LIQUID FUEL/EXTERNAL FIRE, MUNITION TEST PROCEDURES |
| AECTP-200 : 2009 | ENVIRONMENTAL CONDITIONS |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| STANAG 2895 : 1990 | EXTREME CLIMATIC CONDITIONS AND DERIVED CONDITIONS FOR USE IN DEFINING DESIGN/TEST CRITERIA FOR NATO FORCES MATERIAL |
| SAE AS 8660 : 1999 | SILICONE COMPOUND NATO CODE NUMBER S-736 |
| AOP 4157 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS (SAF SYSTEMS) TESTING REQUIREMENTS |
| STANAG 4225 : 0 | THE SAFETY EVALUATION OF MORTAR BOMBS |
| MIL-STD-322 Revision B:1984 | Explosive Components, Electrically Initiated, Basic Evaluation Tests for |
| ASTM D 4549 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
| MIL-T-18404 Base Document:1955 | TORPEDOES, ENVIRONMENTAL REQUIREMENTS; GENERAL SPECIFICATION FOR |
| STANAG 4439 : 2010 | POLICY FOR INTRODUCTION AND ASSESSMENT OF INSENSITIVE MUNITIONS (IM) |
| AECTP-300 : 2006 | CLIMATIC ENVIRONMENTAL TESTS |
| SAE AMS QQ A 225/8 : 1998 | ALUMINUM ALLOY 6061, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| STANAG 4238 : 2002 | MUNITION DESIGN PRINCIPLES, ELECTRICAL/ELECTROMAGNETIC ENVIRONMENTS |
| SAE AMS QQ A 225/6 : 1998 | ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED |
| AOP 8 : 1990 | |
| MIL-STD-331 Revision D:2017 | FUZES, IGNITION SAFETY DEVICES AND OTHER RELATED COMPONENTS, ENVIRONMENTAL AND PERFORMANCE TESTS FOR |
| AOP 43 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - GUIDELINES FOR STANAG 4560 |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| STANAG 4560 : 2016 | ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - AOP-43 EDITION 3 |
Free
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.