API STD 541 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
28-05-2021
Russian, English
01-12-2014
1 General
2 Normative References
3 Terms and Definitions
4 Basic Design
5 Accessories
6 Inspection, Testing, and Preparation for Shipment
7 Guarantee and Warranty
8 Vendor's Data
Annex A - Datasheets
Annex B - Vendor Drawing and Data Requirements
Annex C - Datasheet Guide
Annex D - Procedure for Determination of Residual Unbalance
Annex E - Procedure and Guidance for Determining the Allowable
Resultant Vector Change During a Heat Run Test
Annex F - Alternate Criteria for Defining a Well Damped Resonance
Annex G - AC Stator Form Coil Data
Bibliography
Describes the minimum requirements for special purpose form-wound squirrel cage induction motors 375 kW (500 hp) and larger for use in petroleum, chemical, and other industry applications.
DocumentType |
Standard
|
Pages |
168
|
ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria
|
PublisherName |
American Petroleum Institute
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
API 618 : 2007 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
IEEE 3001.11-2017 | IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems |
IEEE 3004.8-2016 | IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
API 618 : 2007 : R2016 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API 11PGT : 1992 | RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES |
IEEE 1566-2015 REDLINE | IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger |
EN 60034-14:2004/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY |
API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 676 REDLINE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
BS ISO 13373-9:2017 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Diagnostic techniques for electric motors |
API 672 : 2004 | PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 9100B : 1998 | GUIDANCE DOCUMENT FOR MODEL EHS MANAGEMENT SYSTEM |
API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
I.S. EN ISO 10440-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
VDI 3839 Blatt 5:2001-09 | Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with electrical machines |
API 1129 : 1996 | ASSURANCE OF HAZARDOUS LIQUID PIPELINE SYSTEM INTEGRITY |
04/30114086 DC : DRAFT JUL 2004 | EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE) |
ISO 13373-9:2017 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors |
API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
UNI EN ISO 10440-1 : 2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
API 675 : 2012 | POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 616 REDLINE : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
API STD 676 : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
API 676 CHINESE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
IEEE 45.1-2017 | IEEE Recommended Practice for Electrical Installations on Shipboard--Design |
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
API 676 : 2009 : R2015 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
IEEE 1415 : 2006 | INDUCTION MACHINERY MAINTENANCE TESTING AND FAILURE ANALYSIS |
API 691 : 2017 | RISK-BASED MACHINERY MANAGEMENT |
API 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
BS EN ISO 10440-1:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
EN ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
01/202454 DC : DRAFT APRIL 2001 | IEC 60034-14 ED.4 - ROTATING ELECTRICAL MACHINERY - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY |
IEEE 1068-2015 REDLINE | IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries |
BS EN 60034-14:2004 | Rotating electrical machines Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity |
API 619 REDLINE : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
IEEE 45.6-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing |
API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API 538 : 2015 | INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
IEEE 1349-2011 REDLINE | IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations |
IEEE 1434-2014 | IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery |
I.S. EN 60034-14:2004 | ROTATING ELECTRICAL MACHINES - PART 14: MECHANICAL VIBRATION OF CERTAIN MACHINES WITH SHAFT HEIGHTS 56 MM AND HIGHER - MEASUREMENT, EVALUATION AND LIMITS OF VIBRATION SEVERITY |
IEEE 112-2004 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
IEEE DRAFT 1068 : D3 JUN 96 | RECOMMENDED PRACTICE FOR THE REPAIR AND REWINDING OF MOTORS FOR THE PETROLEUM AND CHEMICAL INDUSTRY |
API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
IEC 60038:2009 | IEC standard voltages |
IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
AGMA 9002 : B | BORES AND KEYWAYS FOR FLEXIBLE COUPLINGS (INCH SERIES) |
API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
ABMA 9 : 2015 | LOAD RATINGS AND FATIGUE LIFE FOR BALL BEARINGS |
ABMA 8.2 : 1999 | BALL AND ROLLER MOUNTING ACCESSORIES INCH DESIGN |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
IEC 60404-1-1:2004 | Magnetic materials - Part 1-1: Classification - Surface insulations of electrical steel sheet, strip and laminations |
ABMA 11 : 2014 | LOAD RATINGS AND FATIGUE LIFE FOR ROLLER BEARINGS |
C22.1-15 | Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations |
ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
IEEE C62.21 : 2003 | GUIDE FOR THE APPLICATION OF SURGE VOLTAGE PROTECTIVE EQUIPMENT ON AC ROTATING MACHINERY 1000 V AND GREATER |
IEEE 841-2009 | IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
ASME PV CODE 2 SET : 2013 | ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - MATERIALS (SET) |
API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
NEMA 250 : 2014 | ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM) |
ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
ISO 9013:2017 | Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances |
IEC TR 60894:1987 | Guide for test procedure for the measurement of loss tangent of coils and bars for machine windings |
ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
ISO 3453:1984 | Non-destructive testing — Liquid penetrant inspection — Means of verification |
ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
ISO 3506:1979 | Corrosion-resistant stainless steel fasteners — Specifications |
IEEE 1776 : 2008 | THERMAL EVALUATION OF UNSEALED OR SEALED INSULATION SYSTEMS FOR AC ELECTRIC MACHINERY EMPLOYING FORM-WOUND PRE-INSULATED STATOR COILS FOR MACHINES RATED 15000 V AND BELOW |
ISO 68:1973 | ISO general purpose screw threads Basic profile |
ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
API 670 : 2014 | MACHINERY PROTECTION SYSTEMS |
EN 60751:2008 | INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS |
ISO 9691:1992 | Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections |
EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
IEEE 1434-2014 | IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery |
ISO 492:2014 | Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
IEEE 1349-2011 REDLINE | IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations |
ASTM E 125 : 1963 : R2003 | Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
ANSI/NEMA C50.41 : 2012 | POLYPHASE INDUCTION MOTORS FOR POWER GENERATION STATIONS |
ASTM D 1868 : 2013 : REDLINE | Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
ISO 261:1998 | ISO general purpose metric screw threads General plan |
ISO 5753:1991 | Rolling bearings — Radial internal clearance |
IEEE 43-2013 REDLINE | IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery |
API 686 : 2009 | RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN |
IEC 60404-1:2016 | Magnetic materials - Part 1: Classification |
ASME PV CODE 8 SET : 2013 | ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - RULES FOR CONSTRUCTION OF PRESSURE VESSELS (SET) |
ABMA 20 : 2011 | RADIAL BEARINGS OF BALL, CYLINDRICAL ROLLER AND SPHERICAL ROLLER TYPES - METRIC DESIGN |
IEEE 112-2004 | IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
IEEE 286-2000 | IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
ISO 76:2006 | Rolling bearings Static load ratings |
IEEE 303-2004 | IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations |
ABMA 7 : 1995 | SHAFT AND HOUSING FITS FOR METRIC RADIAL BALL AND ROLLER BEARINGS (EXCEPT TAPERED ROLLER BEARINGS) CONFORMING TO BASIC BOUNDARY PLAN |
NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.