API TR 17TR8 : 2018

Superseded

View Superseded by

HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES

Amended by

API TR 17TR8 : 2018/ADD1 :2019

Available format(s)

Hardcopy , PDF

Superseded date

26-02-2021

Language(s)

English

Published date

01-03-2018

Publisher

American Petroleum Institute

1 Scope
2 Normative References
3 Terms, Definitions, Acronyms, Abbreviations, and
  Symbols
4 Addressing Issues Posed in API Technical
  Report 1PER15K-1
5 Design Verification
6 Materials for High-pressure High-temperature
  Equipment
7 Seals and Bolting/Fasteners
8 Design Validation
9 Hydrostatic Body Test for High-pressure
  High-temperature Equipment
Annex A (informative) - Load Monitoring
Annex B (informative) - Material Selection
Annex C (normative) - Material Quality Control
Annex D (informative) - Material Characterization Protocols
Annex E (informative) - Strain Limit Damage Material Evaluation
Bibliography

Gives design guideline for high-pressure high-temperature (HPHT) equipment, specifically for subsea applications.

DocumentType	Standard
Pages	1222
ProductNote	This product is unavailable in Cuba, Iran, North Korea, Syria New child ADD 1 2019 is added.
PublisherName	American Petroleum Institute
Status	Superseded
SupersededBy	API TR 17TR8 : 2018+ADD 1 : 2019
Supersedes	API TR 17TR8 : 2015

ASME PV CODE 8 DIV 2 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES
MIL HDBK 5 : G_VOL2	METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES
ASTM E 328 : 2013 : REDLINE	Standard Test Methods for Stress Relaxation Tests for Materials and Structures
BS 7608:1993	Code of practice for fatigue design and assessment of steel structures
ISO 2921:2011	Rubber, vulcanized Determination of low-temperature retraction (TR test)
NACE TM 01 87 : 2011	EVALUATING ELASTOMERIC MATERIALS IN SOUR GAS ENVIRONMENTS
API 17P : 2013	DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
ISO 7619-1:2010	Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
ASTM A 833 : 2008	Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASNT SNT TC 1A : 2016	TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM A 923 : 2014 : REDLINE	Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM E 309 : 2016 : REDLINE	Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
ASME PV CODE 9 : 2017	BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ASTM E 2714 : 2013 : REDLINE	Standard Test Method for Creep-Fatigue Testing
ASTM D 1141 : 1998 : EDT 1	Standard Practice for the Preparation of Substitute Ocean Water
ASTM E 562 : 2011 : REDLINE	Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
API 6J1 : 2000	ELASTOMER LIFE ESTIMATION TESTING PROCEDURES
ISO 815-1:2014	Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
API 6A : 2010	SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
ISO 899:1981	Plastics — Determination of tensile creep
ASTM D 6147 : 1997	Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression
ASME PV CODE 2 SET : 2013	ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - MATERIALS (SET)
ASTM E 384 : 2017 : REDLINE	Standard Test Method for Microindentation Hardness of Materials
ASTM E 273 : 2015 : REDLINE	Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
ASME B31.8 : 2016	Gas Transmission and Distribution Piping Systems
ISO 6892-1:2016	Metallic materials Tensile testing Part 1: Method of test at room temperature
ASTM D 1238 : 2013 : REDLINE	Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
NACE TM 01 77 : 2016	LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
ASME B31.3:2016	PROCESS PIPING
ANSI B11 : 2008	GENERAL SAFETY REQUIREMENTS COMMON TO ANSI B11 MACHINES
ASTM D 792 : 2013 : REDLINE	Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASME PV CODE 8 DIV 3 : 2017	BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS
ASME B31.4 : 2016	PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
ISO 11359-2:1999	Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ASTM G 78 : 2015 : REDLINE	Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
ISO 34-1:2015	Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces
NACE SP 01 76 : 2007	CORROSION CONTROL OF SUBMERGED AREAS OF PERMANENTLY INSTALLED STEEL OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
ASTM E 1473 : 2016 : REDLINE	Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys
ASTM E 768 : 1999 : R2018	Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
ASTM E 10 : 2017-05	TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
NACE TM 01 98 : 2016	SLOW STRAIN RATE TEST METHOD FOR SCREENING CORROSION-RESISTANT ALLOYS FOR STRESS CORROSION CRACKING IN SOUR OILFIELD SERVICE
ISO 75-2:2013	Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
API 578 : 2010	GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS
API TR 6MET : 2010	METALLIC MATERIAL LIMITS FOR WELLHEAD EQUIPMENT USED IN HIGH TEMPERATURE FOR API 6A AND 17D APPLICATIONS
ISO 13879:1999	Petroleum and natural gas industries — Content and drafting of a functional specification
ASTM E 350 : 2012-09	TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON
API SPEC 20E : 2017	ALLOY AND CARBON STEEL BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES
ASTM D 1525 : 2017	Standard Test Method for Vicat Softening Temperature of Plastics
ISO 3384-1:2011	Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature
ISO 4664:1998	Rubber Guide to the determination of dynamic properties
ISO 1183:1987	Plastics Methods for determining the density and relative density of non-cellular plastics
API 20F : 2015	CORROSION RESISTANT BOLTING FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRIES
ASME FFS 1 : 2007	FITNESS-FOR-SERVICE
ISO 13880:1999	Petroleum and natural gas industries — Content and drafting of a technical specification
ASNT CP 189 : 2016	QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM E 353 : 2014 : REDLINE	Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM D 696 : 2016 : REDLINE	Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
ISO 23936-2:2011	Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers
ISO 180:2000	Plastics Determination of Izod impact strength
ASTM E 426 : 2016 : REDLINE	Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys
API Q1 : 2013	SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY
ASTM D 790 : 2017 : REDLINE	Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
API 6AB : 1ED 83	SPECIFICATION FOR 30000 PSI WELLHEAD EQUIPMENT
ASTM E 999 : 2015 : REDLINE	Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
ASTM E 2375 : 2016 : REDLINE	Standard Practice for Ultrasonic Testing of Wrought Products
ASTM E 1444 : 2005	Standard Practice for Magnetic Particle Testing
ASTM G 46 : 1994 : R2018	Standard Guide for Examination and Evaluation of Pitting Corrosion
ISO 604:2002	Plastics — Determination of compressive properties
ISO 6914:2013	Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension
ASTM E 381 : 2017 : REDLINE	Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
API 20B : 2013	OPEN DIE SHAPED FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
API TR 17TR5 : 2012	AVOIDANCE OF BLOCKAGES IN SUBSEA PRODUCTION CONTROL AND CHEMICAL INJECTION SYSTEMS
ISO 62:2008	Plastics Determination of water absorption
ASTM D 648 : 2016	Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ISO 306:2013	Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
ASME PV CODE 5 : 2017	BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION
ASTM D 4065 : 2012 : REDLINE	Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
ASTM E 111 : 2017 : REDLINE	Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM E 2760 : 2016 : REDLINE	Standard Test Method for Creep-Fatigue Crack Growth Testing
ISO 6892-2:2011	Metallic materials Tensile testing Part 2: Method of test at elevated temperature
ASTM E 703 : 2014 : REDLINE	Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
ISO 37:2017	Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
API TR 1PER15K-1 : 2013	PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
ASTM D 1329 : 2016 : REDLINE	Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
BS EN 473:2008	Non-destructive testing. Qualification and certification of NDT personnel. General principles
ASTM E 571 : 2012 : REDLINE	Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
ASTM E 8 : 2004	Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 709 : 2015 : REDLINE	Standard Guide for Magnetic Particle Testing
API 579-1 : 2016	FITNESS-FOR-SERVICE
ASTM E 1382 : 1997	Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
ASTM D 695 : 2015 : REDLINE	Standard Test Method for Compressive Properties of Rigid Plastics
ISO 48:2010	Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
API 6X : 2014	DESIGN CALCULATIONS FOR PRESSURE-CONTAINING EQUIPMENT
ASTM D 570 : 1998 : R2018	Standard Test Method for Water Absorption of Plastics
API RP 17N : 2017	RECOMMENDED PRACTICE ON SUBSEA PRODUCTION SYSTEM RELIABILITY, TECHNICAL RISK, AND INTEGRITY MANAGEMENT
ISO 178:2010	Plastics Determination of flexural properties
ASTM D 471 : 2016-02	TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
ASTM D 2990 : 2017 : REDLINE	Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ISO 1133:2005	Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
API 17D : 2011	DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
ASTM D 638 : 2014 : REDLINE	Standard Test Method for Tensile Properties of Plastics
API 20C : 2015	CLOSED DIE FORGINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
ISO 868:2003	Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1817:2015	Rubber, vulcanized or thermoplastic Determination of the effect of liquids
API 1111 : 2015	DESIGN, CONSTRUCTION, OPERATION, AND MAINTENANCE OF OFFSHORE HYDROCARBON PIPELINES (LIMIT STATE DESIGN)
ISO 2781:2008	Rubber, vulcanized or thermoplastic Determination of density