• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 2067-1984

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Switchgear assemblies and ancillary equipment for alternating voltages above 1 kV
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

30-06-2017

Language(s)

English

Published date

01-01-1984

Preview

Specifies requirements for high voltage a.c. switchgear assemblies, indoor and outdoor, employed in connection with the generation, transmission and distribution of electric power and to ancillary equipment used in conjunction with the switchgear. Gives detailed requirements for electrical clearances, safety of personnel, earthing of main circuits, substations and their enclosures. Also specifies requirements for busbars, marking and identification of conductors and terminals, colours of indicator lights, and electrical and compressed air auxiliary systems. Appendices include jointing of busbars and connections, design of earthing systems, and provision of safety clearances.

This standard specifies the requirements for indoor and outdoor switchgear assemblies for alternating voltages above 1 kV such as are employed in connection with the generation, transmission and distribution of electric power. It also applies to the ancillary equipment used in conjunction with the switchgear.It is not intended to cover the requirements for specific apparatus for which separate Australian standards may exist (see Clause 1.3), nor the additional requirements for switchgear for use in mines and explosive atmospheres.It does not give any recommendations for environmental requirements, but these should be taken into consideration in the siting of the installation.

Committee
EL-043
DocumentType
Standard
ISBN
0 7262 3446 X
Pages
49
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

AS 1795.2-1983 Sheets and boards for electrical purposes - Dimensions of switchboard panels
AS 3178-1991 Approval and test specification - Electric cables - Silicone rubber insulated - For working voltages up to and including 0.6/1 kV
AS 2024-1991 High voltage a.c. switchgear and controlgear - Switch-fuse combinations
AS 1243-1982 Voltage transformers for measurement and protection
AS/NZS 1429.1:2006 Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV
AS 1024-1971 Direct recording electrical measuring instruments and their accessories
AS 2086-1995 A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 72.5 kV
AS 2121-1979 The design of earthquake-resistant buildings (known as the SAA Earthquake Code)
AS/NZS 3198:1996 Approval and test specification - Electric cables - XLPE insulated - For working voltages up to and including 0.6/1 kV
AS 1824.1-1995 Insulation co-ordination Definitions, principles and rules
AS 1828-1984 Electrical equipment for explosive atmospheres - Cable glands
AS 1431.2-1989 Low voltage switchgear and controlgear - Control circuit devices and switching elements - Additional requirements for push-buttons and indicator lights
AS 1154.1-2004 Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions
AS 1265-1990 Bushings for alternating voltages above 1000 V
AS 1767-1975 Insulating oil for transformers and switchgear
AS 1531.1-1974 Aluminium conductors for overhead power transmission purposes - All-aluminium conductors (AAC)
AS/NZS 1768:2007 Lightning protection
AS/NZS 3188:1995 Approval and test specification - Terminations and glands for mineral-insulated metal-sheathed cables
AS/NZS 3155:1995 Approval and test specification - Electric cables - Neutral screened - For working voltages up to and including 0.6/1 kV
AS 1360.11-1980 Rotating electrical machines of particular types or for particular applications - Dimensions and performance of small power electrical machines
AS 1135-1973 Rules for the design, fabrication, installation and inspection of non-ferrous pressure piping (known as the SAA Non-ferrous Pressure Piping Code)
AS 1306-1985 High voltage a.c. switchgear and controlgear - Disconnectors (isolators) and earthing switches
AS/NZS 1026:2004 Electric cables - Impregnated paper insulated - For working voltages up to and including 19/33 (36) kV
AS 1284.1-2004 Electricity metering General purpose induction watthour meters (Reconfirmed 2019)
AS 3007.2-2004 Electrical installations - Surface mines and associated processing plant - General protection requirements
AS 1137.3-1981 Insulators - Porcelain and glass indoor and outdoor station post insulators (for voltages greater than 1000 V a.c.)
AS 1981-1981 Stationary batteries of the lead-acid pasted plate type
AS 3147-1992 Approval and test specification - Electric cables - Thermoplastic insulated - For working voltages up to and including 0.6/1 kV
AS 1675-1986 Current transformers - Measurement and protection
AS 1025.2-1989 High-voltage a.c. switchgear and controlgear - Switches and switch-disconnectors - For rated voltages of 52 kV and above
AS/NZS 1429.2:1998 Electric cables - Polymeric insulated - For working voltages above 19/33 (36) kV up to and including 76/132 (145) kV
AS 2264-1995 A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 38 kV
AS 1033-1971 High-voltage expulsion and similar fuses
AS 2005.2-1977 Low voltage fuses - Fuses with enclosed fuse-links - Fuses for industrial application
AS 2006-1986 High voltage a.c. switchgear and controlgear - Circuit breakers for rated voltages above 1000 V
AS 1154.2-1985 Insulator and conductor fittings for overhead power lines - Dimensions
AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 1824.2-1985 Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV) - Application guide
AS 1746-1991 Conductors - Bare overhead - Hard-drawn copper
AS 1284.3-1991 Electricity metering Induction watthour meters - Energy demand type
AS 2467-1981 Maintenance of electrical switchgear
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS 1349-1986 Bourdon tube pressure and vacuum gauges (Reconfirmed 2018)
AS 1939-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code)
AS 1025.1-1984 High-voltage a.c. switchgear and controlgear - Switches and switch-disconnectors - For rated voltages above 1 kV and less than 52 kV
AS 2481-1981 All-or-nothing electrical relays (instantaneous and timing relays)
AS/NZS 3116:1996 Approval and test specification - Electric cables - Elastomer insulated - For working voltages up to and including 0.6/1 kV
AS 2128-1981 Progress Certificate
AS 2650-2005 Common specifications for high-voltage switchgear and controlgear standards (IEC 60694 Ed.2.2(2002) MOD)
AS/NZS 1167.1:2005 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 1431.1-1989 Low voltage switchgear and controlgear - Control circuit devices and switching elements - General requirements
AS 2005.1-1981 Fuses with enclosed fuse-links (up to and including 1000 V a.c. and 1500 V d.c.) - General requirements
AS 1210-1997 Pressure vessels
AS/NZS 3187:1995 Approval and test specification - Mineral-insulated metal-sheathed cables
AS 2263-1995 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
AS 2395-1980 Terminals for switchgear assemblies for alternating voltages above 1 kV
AS/NZS 1865:1997 Aluminium and aluminium alloys - Drawn wire, rod, bar and strip (Reconfirmed 2020)
AS 1531.2-1974 Aluminium conductors for overhead power transmission purposes - All-aluminium alloy conductors (AAAC)
AS 3135-1997 Approval and test specification - Semi-enclosed fuses for a.c. circuits
AS 1284.2-1973 Electricity metering - Portable alternating current rotating standard watthour meters
AS 3158-2004 Electric cables - Glass fibre insulated - For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2016)
AS 1852.441-1985 International electrotechnical vocabulary - Switchgear, controlgear and fuses
AS 1725-2003 Chain-link fabric security fencing and gates
AS 1931.1-1996 High-voltage test techniques - General definitions and test requirements
AS 1042-1973 Direct-acting indicating electrical measuring instruments and their accessories
AS/NZS 1665:2004 Welding of aluminium structures (Reconfirmed 2016)
AS/NZS 1668.1:1998 The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings
AS 1271-2003 Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels (Reconfirmed 2016)

AS 3860-1991 Fixed guideway people movers
AS 1418.10(INT)-2004 Cranes, hoists and winches Elevating work platforms
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3010:2005 Electrical installations - Generating sets
AS 5062-2006 Fire protection for mobile and transportable equipment
AS 2467-2008 Maintenance of electrical switchgear
AS 2467-1981 Maintenance of electrical switchgear
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 4214-2002 Gaseous fire extinguishing systems
AS 62271.301-2005 High voltage switchgear and controlgear Dimensional standardization of terminals (Reconfirmed 2016)
AS/NZS 4871.1:2002 Electrical equipment for coal mines, for use underground General requirements

View more information
£68.93
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.