AS 2738-2000
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
23-02-2000
Provides listings of designations and chemical composition limits of copper and copper alloys in general use in Australia. Includes refinery products, wrought products, ingot and cast products. An appendix matches the designations with other common designations used internationally including those in ISO Standards.
1.1 SCOPE This Standard lists the designations and chemical composition limits for copper and copper alloy refinery, wrought, ingot and cast products in general use in Australia.NOTES:1 Related designations to compositions listed in this Standard are given in Appendix A.2 Copper and copper alloy products used for the conveyance of drinking (potable) water and waste water may be subject to specific requirements as specified in relevant product Standards or specifications.
| Committee |
MT/2
|
| DocumentType |
Standard
|
| ISBN |
0 7337 3237 2
|
| Pages |
21
|
| ProductNote |
Reconfirmed 14/09/2018.
This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 14/09/2018 |
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes |
First published in part as AS 2738.1-1984, AS 2738.2-1984 and AS 2738.3-1984.
AS 2738.1-1984, AS 2738.2-1984 and AS 2738.3-1984 revised, amalgamated and redesignated as AS 2738-2000.
Reconfirmed 2018.
Originated in part as AS 2738.1-1984, AS 2738.2-1984 and AS 2738.3-1984. AS 2738.1-1984, AS 2738.2-1984 and AS 2738.3-1984 revised, amalgamated and redesignated as AS 2738-2000.
| AS/NZS 1571:1995 | Copper - Seamless tubes for airconditioning and refrigeration |
| AS/NZS 1573:1995 | Copper and copper alloys - Wire for engineering purposes (Reconfirmed 2020) |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS 1566-1997 | Copper and copper alloys - Rolled flat products (Reconfirmed 2018) |
| AS/NZS 1279:1996 | Copper refinery shapes |
| AS/NZS 1574:1996 | Copper and copper alloys - Wire for electrical purposes (Reconfirmed 2020) |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS 1569-1998 | Copper and copper alloys - Seamless tubes for heat exchangers (Reconfirmed 2020) |
| ATS 5200.016-2010 | Technical Specification for plumbing and drainage products Cistern inlet valves |
| AS/NZS 1596:2002 | The storage and handling of LP Gas |
| AS 3517-2007 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
| ATS 5200.004-2005 | Technical Specification for plumbing and drainage products Urinal flushing cisterns |
| AS/NZS 5601.2:2010 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
| AS 1357.1-2004 | Valves primarily for use in heated water systems - Protection valves |
| ATS 5200.042-2004 | Technical Specification for plumbing and drainage products - Roll-grooved jointing systems |
| AS/NZS 1546.1:2008 | On-site domestic wastewater treatment units Septic tanks |
| AS 5601-2004 | Gas installations |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 5200.037.2-2008 | Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016) |
| AS/NZS 3499:2006 | Water supply - Flexible hose assemblies (Reconfirmed 2016) |
| AS/NZS 1768:2007 | Lightning protection |
| ATS 5200.020-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply |
| AS 5830.1-2012 | In-line ball valves for use in plumbing water supply systems Metal-bodied |
| AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
| ATS 5200.468-2005 | Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves |
| AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
| AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
| ATS 5200.017-2005 | Technical Specification for plumbing and drainage products Cistern outlet valves |
| ATS 5200.464-2004 | Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems |
| AS 4032.2-2005 | Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015) |
| ATS 5200.425-2009 | Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system |
| AS 4747.2-2013 | Meters for non-urban water supply Technical requirements for closed conduit meters fully charged |
| ATS 5200.476-2006 | Technical Specification for plumbing and drainage products Heated water systems - Leak protection device |
| AS 1357.2-2005 | Valves primarily for use in heated water systems Control valves (Reconfirmed 2015) |
| AS 4809-2003 | Copper pipe and fittings - Installation and commissioning |
| AS/NZS 5601.2:2020 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
| ATS 5200.420-2005 | Technical Specification for plumbing and drainage products Trap-priming valves |
| ATS 5200.477-2006 | Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices |
| ATS 5200.007-2004 | Technical Specification for plumbing and drainage products - Water hammer arrestors |
| AS 4747.3-2013 | Meters for non-urban water supply Technical requirements for open channel meters |
| AS 5081-2008 | Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016) |
| AS 4956-2008 | Air valves for water supply |
| ATS 5200.037.1-2006 | |
| AS 4795-2002 | Double-flanged butterfly valves for waterworks purposes |
| AS 4883-2008 | Air valves for sewerage |
| AS 4883:2017 | Air valves for sewerage |
| AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
| ATS 5200.021-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply |
| ATS 5200.467-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
| ATS 5200.482-2006 | Technical Specification for plumbing and drainage products Soil waste dump fitting |
| ATS 5200.466-2004 | Technical Specification for plumbing and drainage products - Rainwater tank connection devices |
| ATS 5200.472-2006 | Technical Specification for plumbing and drainage products Heated water system recirculation device |
| AS 4809:2017 | Copper pipe and fittings - Installation and commissioning |
| AS/NZS 5601.1:2013 | Gas installations General installations |
| AS 4775-2007 | Emergency eyewash and shower equipment |
| AS 4795-2006 | Butterfly valves for waterworks purposes |
| AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
| AS 4032.4:2014 | Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures |
| ATS 5200.012-2005 | Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic |
| AS/NZS 1596:2008 | The storage and handling of LP Gas |
| ATS 4747.2-2008 | Meters for non-urban water supply Specification for closed conduit meters fully charged |
| ATS 5200.016-2005 | Technical Specification for plumbing and drainage products - Cistern inlet valves |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS/NZS 5601.2:2013 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
| ATS 5200.475-2006 | Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device |
| AS 4956:2017 | Air valves for water supply |
| AS 1357.1-2009 | Valves primarily for use in heated water systems Protection valves |
| ATS 5200.481-2006 | Technical Specification for plumbing and drainage products Thermal switching valves |
| ATS 4747.3-2008 | Meters for non-urban water supply - Specifications for open channel meters |
| AS/NZS 5601.1:2010 | Gas installations General installations |
| AS 4425:2020 | Above‑ground burial structures |
| AS 5200.007-2008 | Plumbing and drainage products Metal-bodied water hammer arresters |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| ATS 5200.052-2005 | Metallic-bodied inlet pressure control valves greater than DN 50 |
| ATS 5200.479-2006 | Flood stop safety valve |
| ATS 5200.030-2004 | Technical Specification for plumbing and drainage products - Solenoid valves |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS/NZS 1768(INT):2003 | Lightning protection |
| ATS 5200.030-2007 | Technical Specification for plumbing and drainage products Solenoid valves |
| ATS 5200.485-2006 | Pressure compensating tank |
| AS/NZS 1596:2014 | The storage and handling of LP Gas |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.