• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 5100.5:2017

Current
Current

The latest, up-to-date edition.

Bridge design Concrete
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

31-03-2017

Preview

Sets out minimum requirements for the design and construction of concrete bridges and associated structures, including members that contain reinforcing steel and tendons, or both, in limit state format.

This Standard sets out minimum requirements for the design and construction of concrete bridges and associated structures that contain reinforcement or tendons, or both. It also sets out minimum requirements for plain and steel fibre reinforced concrete (SFRC) members. NOTES: 1 It is intended that the properties and requirements for reinforcement or tendons, as set out in this Standard, may also be used for the design and construction of elements not containing concrete, for example, stress laminated timber decks.2 For design life of bridges covered by this Standard, see Clause 4.1.

Committee
BD-090
DocumentType
Standard
ISBN
978 1 76035 718 4
Pages
215
ProductNote
Also numbered as AP-G51.5-17.
PublisherName
Standards Australia
Status
Current
Supersedes

Originated as HB 77.5—1996.Revised and redesignated as AS 5100.5—2004.Second edition 2017. Originated as HB 77.5-1996. Revised and redesignated as AS 5100.5-2004. Second edition 2017. Reissued incorporating Amendment No. 1 (November 2018).

AS 1012.21-1999 Methods of testing concrete Determination of water absorption and apparent volume of permeable voids in hardened concrete (Reconfirmed 2014)
AS 1012.11-2000 Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014)
AS 1012.20.1:2016 Methods of testing concrete Determination of chloride and sulfate in hardened concrete and aggregates - Nitric acid extraction method
AS 3799-1998 Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018)
AS 3735-2001 Concrete structures for retaining liquids
SA HB 79:2015 Alkali Aggregate Reaction - Guidelines on Minimising the Risk of Damage to Concrete Structures in Australia
AS 5100.2:2017 Bridge design Design loads
AS/NZS 4672.2:2007 Steel prestressing materials Testing requirements
AS 1012.20.2:2016 Methods of testing concrete Determination of water-soluble chloride in aggregates and hardened concrete
AS 1012.1:2014 Methods of testing concrete Sampling of concrete
AS 1012.3.1:2014 Methods of testing concrete Determination of properties related to the consistency of concrete - Slump test
AS 3600-2009 Concrete structures
AS 1012.9:2014 Methods of testing concrete Compressive strength tests - Concrete, mortar and grout specimens
AS 1012.13:2015 Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
AS 1012.4.1:2014 Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in concrete volume with increased air pressure
AS 1100.501-1985 Technical drawing - Structural engineering drawing
AS 1379-2007 Specification and supply of concrete (Reconfirmed 2017)
AS 1012.12.1-1998 Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014)
AS 5100.1:2017 Bridge design Scope and general principles
AS/NZS 1768:2007 Lightning protection
AS 1597.2-2013 Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height)
AS/NZS 1554.6:2012 Structural steel welding Welding stainless steels for structural purposes
AS 3735 SUPP 1-2001 Concrete structures for retaining liquids - Commentary (Supplement to
AS/NZS 4671:2001 Steel reinforcing materials
AS 4672.1:2007 Steel prestressing materials General requirements
AS 1012.10-2000 Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014)
AS 5100.7:2017 Bridge design Bridge assessment
AS/NZS 3500.2:2015 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 1554.3:2014 Structural steel welding Welding of reinforcing steel
AS/NZS 1170.0:2002 Structural design actions General principles
AS 1012.4.3:2014 Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring air volume when concrete is dispersed in water
AS 1012.2:2014 Methods of testing concrete Preparing concrete mixes in the laboratory
AS 1012.3.5:2015 Methods of testing concrete Determination of properties related to the consistency of concrete - Slump flow, T500 and J-ring test
AS/NZS 3582.1:2016 Supplementary cementitious materials Fly ash
AS 1012.16-1996 Methods of testing concrete Determination of creep of concrete cylinders in compression (Reconfirmed 2014)
AS/NZS 2425:2015 Bar chairs in reinforced concrete - Product requirements and test methods
AS/NZS 3500.4:2015 Plumbing and drainage Heated water services
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3582.3:2002 Supplementary cementitious materials for use with portland and blended cement Amorphous silica
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 1012.14-1991 Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength
AS 1012.4.2:2014 Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in air pressure in chamber above concrete
AS 3972-2010 General purpose and blended cements
AS/NZS 3582.3:2016 Supplementary cementitious materials Amorphous silica
AS 1478.1-2000 Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018)
AS 1012.12.2-1998 Methods of testing concrete Determination of mass per unit volume of hardened concrete - Water displacement method (Reconfirmed 2014)
AS/NZS 3500.1:2015 Plumbing and drainage Water services
AS 3610.1-2010 Formwork for concrete Documentation and surface finish
AS 1141.60.2:2014 Methods for sampling and testing aggregates Potential alkali-silica reactivity - Concrete prism method
AS 1012.17-1997 Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014)

AS 5100.9:2017 Bridge design Timber
AS 5100.7:2017 Bridge design Bridge assessment
AS 3700:2018 Masonry Structures
AS 5100.4:2017 Bridge design Bearings and deck joints
AS 5100.8:2017 Bridge design Rehabilitation and strengthening of existing bridges
AS 5100.1:2017 Bridge design Scope and general principles
AS 1012.14:2018 Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume
AS 5100.3:2017 Bridge design Foundation and soil-supporting structures
AS 5100.2:2017 Bridge design Design loads
AS/NZS 5100.6:2017 Bridge design Steel and composite construction

View more information
£164.38
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.