• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 1338.1:1992

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Filters for eye protectors Filters for protection against radiation generated in welding and allied operations
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

16-11-1992

Preview

Specifies requirements for filters used in eye protection against high intensity radiation emitted during welding and allied operations including electrically controlled filters. A classification system is provided together with transmittance requirements for such filters.

This Standard specifies requirements for filters used in eye protectors intended to provide protection against radiation of high intensity emitted during welding and allied operations. It specifies the shade numbers and the transmittance requirements of the filters, and applies to filters made of glass or other materials for absorption of radiation. This Standard also applies to cover lenses employed for the protection of filters from damage by abrasion and weld spatter, and to filters incorporated in demonstration welding booths in so far as the relevant requirements of Table 2.1 and Table 2.2 are appropriate. Requirements for welding curtains and screens are covered in AS 3957/NZS 5852.NOTE: Guidance on the selection of filters is given in Appendix A.

Committee
SF-006
DocumentType
Standard
ISBN
0 7262 7758 4
Pages
21
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

In Australia First published as part of AS B91-1951.Revised and redesignated AS Z45-1967.Revised and redesignated AS 1338-1974.Revised and redesignated in part as AS 1338.1-1981. In New Zealand First published as NZS 5817.1:1983. AS 1338.1-1981 and NZS 5817.1:1983 revised, amalgamated and designated as Joint Standard AS/NZS 1338.1:1992. In Australia First published as part of AS B91-1951. Revised and redesignated AS Z45-1967. Revised and redesignated AS 1338-1974. Revised and redesignated in part as AS 1338.1-1981. In New Zealand First published as NZS 5817.1:1983. AS 1338.1-1981 and NZS 5817.1:1983 revised, amalgamated and designated as Joint Standard AS/NZS 1338.1:1992.

AS 1680.1-1990 Interior lighting - General principles and recommendations
AS 2812-1985 Welding, brazing and cutting of metals - Glossary of terms
AS 2812-2005 Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018)
AS/NZS 1336:1997 Recommended practices for occupational eye protection
AS 1337-1984 Eye protectors for industrial applications
AS/NZS 1338.2:1992 Filters for eye protectors Filters for protection against ultraviolet radiation
AS/NZS 3957:2006 Light-transmitting screens and curtains for welding operations
AS/NZS 1680.1:2006 Interior and workplace lighting General principles and recommendations
AS 1336-1982 Recommended practices for eye protection in the industrial environment
AS/NZS 1338.3:1992 Filters for eye protectors Filters for protection against infra-red radiation
AS/NZS 1337:1992 Eye protectors for industrial applications

AS 1988.1-2006 Welding of ferrous castings - Steel castings
AS 1720.4-2006 Timber structures Fire resistance for structural adequacy of timber members
AS/NZS 1554.3:2002 Structural steel welding - Welding of reinforcing steel
AS/NZS 1554.1:1995 Structural steel welding Welding of steel structures
AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
AS 2717.3-1992 Welding - Electrodes - Gas metal arc Corrosion-resisting chromium and chromium-nickel steel electrodes
AS/NZS 2243.6:2010 Safety in laboratories Plant and equipment aspects
AS/NZS 1337.1:2010 Personal eye protection Eye and face protectors for occupational applications
AS/NZS 1067:2003 Sunglasses and fashion spectacles
AS/NZS ISO 14343:2006 Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification (Reconfirmed 2017)
AS/NZS 2243.1:1997 Safety in laboratories - General
AS/NZS 1338.3:1992 Filters for eye protectors Filters for protection against infra-red radiation
AS/NZS 1554.4:2004 Structural steel welding - Welding of high strength quenched and tempered steels
AS 3580.6.1-1990 Methods for sampling and analysis of ambient air Determination of ozone - Direct-reading instrumental method
AS/NZS 1554.2:2003 Structural steel welding Stud welding (steel studs to steel)
AS 1674.2-2007 Safety in welding and allied processes Electrical (Reconfirmed 2018)
AS/NZS 1554.7:2006 Structural steel welding Welding of sheet steel structures
AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
AS/NZS 1554.5:2011 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1674.2-2003 Safety in welding and allied processes - Electrical
AS 3853.1-2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone Sampling of airborne particles
AS/NZS 1554.5:1995 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1554.4:2010 Structural steel welding Welding of high strength quenched and tempered steels
AS/NZS 4855:2007 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification
AS 1485-1983 Safety and health in workrooms of educational establishments
AS/NZS 1554.6:2012 Structural steel welding Welding stainless steels for structural purposes
SAA HB 9-1994 Occupational personal protection
AS 4413-1996 Steel tubes - Pressure application - Flash butt welding
AS/NZS 1337.6:2012 Personal eye protection Prescription eye protectors against low and medium impact
AS/NZS ISO 17633:2006 Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2004, MOD) (Reconfirmed 2017)
AS/NZS 1337.6:2007 Personal eye protection - Prescription eye protectors against low and medium impact
AS 1067.1-1990 Sunglasses and fashion spectacles Safety requirements
AS 2243.6-1990 Safety in laboratories - Mechanical aspects
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS/NZS 1553.3:1996 Covered electrodes for welding - Corrosion-resisting chromium and chromium-nickel steel electrodes
AS/NZS 1554.6:1994 Structural steel welding - Welding stainless steels for structural purposes
AS/NZS 2243.5:2004 Safety in laboratories Non-ionizing radiations - Electromagnetic, sound and ultrasound
AS/NZS 2243.3:2010 Safety in laboratories Microbiological safety and containment
AS 3853.2-2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator’s breathing zone Sampling of gases (Reconfirmed 2016)
AS 1774.10-1994 Refractories and refractory materials - Physical test methods Pyrometric cone equivalent (refractoriness)
AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS/NZS 1337:1992 Eye protectors for industrial applications
AS/NZS 1554.1:2000 Structural steel welding Welding of steel structures
AS/NZS 1338.2:1992 Filters for eye protectors Filters for protection against ultraviolet radiation
AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS/NZS 1554.3:2008 Structural steel welding Welding of reinforcing steel
AS/NZS 1336:1997 Recommended practices for occupational eye protection
AS/NZS 1554.4:1995 Structural steel welding - Welding of high strength quenched and tempered steels
AS/NZS 3957:2006 Light-transmitting screens and curtains for welding operations
AS/NZS 1554.1:2011 Structural steel welding Welding of steel structures
AS/NZS 1665:2004 Welding of aluminium structures (Reconfirmed 2016)

View more information
£50.86
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.