AS/NZS 1594:2002

Specifies requirements for hot-rolled steel plate, floor plate, steel and strip rolled on a continuous mill, in thicknesses up to 8mm for formability and extra formability grades, and up to 16mm for other grades, and for widths up to 2000mm. It includes slit material, provided that the parent metal has an as-rolled width of not less than 600mm.

This Standard specifies requirements for hot-rolled steel plate, floorplate, sheet and strip, rolled on a continuous mill, in thicknesses up to 8 mm for formability and extra formability grades and up to 16 mm for other grades, and for widths up to 2 000 mm. It includes slit material, provided that the parent material has an as-rolled width of not less than 600 mm. The Standard specifies the following grade requirements:(a) For analysis grades—chemical composition only.(b) For formability grades, extra formability grades, and structural grades including weather-resistant grades—both chemical composition and mechanical properties.(c) For floorplate—both chemical composition and mechanical properties.The Standard permits the addition of boron and micro-alloying elements for the achievement of special properties.NOTES: 1 This Standard does not cover the following:(a) Steel plate for boilers and pressure vessels (see AS 1548).(b) Hot-rolled structural steel plates, floorplates and slabs (see AS/NZS 3678).2 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.3 Alternative means for demonstrating compliance with this Standard are given in Appendix B.

First published in Australia as part of AS G2-1945.
AS G2-1945 revised and redesignated AS G16-1967.
AS G33 first published 1971.
AS G16-1967 and AS G33-1971 revised, amalgamated and redesignated (in part) as AS 1594-1974.
Second edition 1981.
Third edition 1989.
Fourth edition 1992.
Jointly revised and designated AS/NZS 1594:1997.
Sixth edition 2002.
Reconfirmed 2016.