AS/NZS 1665:2004 (R2016) Welding of aluminium structures

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

Specifies the requirements for the welding of aluminium and its weldable alloys in structures, components and equipment complying with AS/NZS 1664.1 or AS/NZS 1664.2, by gas tungsten-arc welding (GTAW), gas metal-arc welding (GMAW), pulsed-arc wleding (GTAW or GMAW) and plasma-arc welding (PAW) processes.RECONFIRMATION NOTICETechnical Committee WD-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 25 September 2015.Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 4 November 2016.The following are represented on Technical Committee WD-003:Australasian Corrosion AssociationAustralian Chamber of Commerce and IndustryAustralian Industry GroupAustralian Steel AssociationAustralian Steel InstituteAUSTROADSBureau of Steel Manufacturers of AustraliaEnergy Networks AssociationEngineers AustraliaNew Zealand Heavy Engineering Research AssociationNew Zealand Non-Destructive Testing AssociationSteel Reinforcement Institute of AustraliaThe University of SydneyWelding Technology Institute of Australia

Scope - (Show below) - (Hide below)

This Standard specifies requirements for the welding of aluminium and its weldable alloysin structures, components and equipment complying with AS/NZS 1664.1 or AS/NZS 1664.2, by the following processes:(a) Gas tungsten-arc welding (GTAW).(b) Gas metal-arc welding (GMAW).(c) Pulsed-arc welding (GTAW or GMAW).(d) Plasma-arc welding (PAW).The Standard can also be used for all welded constructions other than those excluded inSection 1.2.NOTES:1 Throughout this Standard, ‘aluminium’ is taken to refer to ‘aluminium and its weldable alloys’.2 Welded components may be made up of combinations of sheets, plates, extrusions or sections, including hollow sections, built-up sections, castings and forgings.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmed 23/12/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 23/12/2016
Pages
ISBN
Committee	WD-003
Supersedes	DR 02451 AS 1665-1992

History - (Show below) - (Hide below)

First published as AS 1665-1976.
Second edition 1992.
Jointly revised and designated AS/NZS 1665:2004.
Reconfirmed 2016.

Standards Referenced By This Book - (Show below) - (Hide below)

AS 1674.2-2003	Safety in welding and allied processes Electrical
AS/NZS 1865:1997	Aluminium and aluminium alloys - Drawn wire, rod, bar and strip (Reconfirmed 2020)
AS 2338-1980	Preferred dimensions of wrought metal products
AS 2214-2004 (R2016)	Certification of welding supervisors - Structural steel welding
AS 3545-2004	Welding positions
AS 4882-2003	Shielding gases for welding
AS 1674.1-1997	Safety in welding and allied processes Fire precautions (Reconfirmed 2016)
AS 1101.3-1987	Graphical symbols for general engineering Welding and non-destructive examination
AS 1674.2-2007	Safety in welding and allied processes Electrical (Reconfirmed 2018)
AS/NZS 1338.1:1992	Filters for eye protectors Filters for protection against radiation generated in welding and allied operations
AS/NZS 1200:2000	Pressure equipment
AS/NZS ISO 3834.3:1999	Quality requirements for welding - Fusion welding of metallic materials Standards quality requirements
AS/NZS ISO 3834.2:1999	Quality requirements for welding - Fusion welding of metallic materials Comprehensive quality requirements
AS 1966.2-1985	Electric arc welding power sources Rotary type
AS/NZS 4360:2004	Risk management
AS 2205.3.1-2003	Methods for destructive testing of welds in metal Transverse guided bend test
AS 1874-2000	Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018)
AS 2812-1985	Welding, brazing and cutting of metals - Glossary of terms
AS 1796-2001 (R2016)	Certification of welders and welding supervisors
AS/NZS 1867:1997	Aluminium and aluminium alloys - Drawn tubes (Reconfirmed 2020)
AS 3545-1988	Welding positions
AS 2799-1992 (R2016)	Resistance welding equipment - Single-phase a.c. transformer type
AS 2205.5.1-2003 (R2018)	Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination
AS 1101.3-2005 (R2018)	Graphical symbols for general engineering Welding and non-destructive examination
AS 2717.2-1988	Welding - Electrodes - Gas metal arc Aluminium and aluminium alloy
AS 2338-2004	Preferred dimensions of wrought metal products
AS/NZS 1664.2:1997	Aluminium structures Allowable stress design (Reconfirmed 2020)
(INVALID RECORD) AS/NZS 1664.1 Supp 1:1997	Aluminium structures Limit state design
AS 1966.1-1985	Electric arc welding power sources Transformer type
AS/NZS 2865:2001	Safe working in a confined space
AS/NZS 1734:1997	Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020)
AS/NZS 4360:1999	Risk management
AS 2812-2005 (R2018)	Welding, brazing and cutting of metals - Glossary of terms
AS 2205.2.1-2003	Methods for destructive testing of welds in metal Transverse butt tensile test
AS/NZS 1336:1997	Recommended practices for occupational eye protection
AS/NZS ISO 3834.4:1999	Quality requirements for welding - Fusion welding of metallic materials Elementary quality requirements
AS 1391-1991	Methods for tensile testing of metals
AS/NZS 1337:1992	Eye protectors for industrial applications
NZS 5828:2015	PLAYGROUND EQUIPMENT AND SURFACING
AS 1470-1986	Health and safety at work - Principles and practices
AS/NZS 1866:1997	Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020)
AS/NZS 1995:2003 (R2017)	Welding cables
AS 1391-2007 (R2017)	Metallic materials - Tensile testing at ambient temperature
AS 2205.4.1-2003 (R2018)	Methods for destructive testing of welds in metal Nick-break test
AS 2205.4.2-2003 (R2018)	Methods for destructive testing of welds in metal Fillet break test
AS/NZS ISO 3834.1:1999	Quality requirements for welding - Fusion welding of metallic materials Guidelines for selection and use

Standards Referencing This Book - (Show below) - (Hide below)

AS 2717.2-1988	Welding - Electrodes - Gas metal arc Aluminium and aluminium alloy
AS/NZS 1576.1:2010	Scaffolding General requirements
AS/NZS 1576.1:2010	Scaffolding General requirements
AS 4085-1992	Automatic sliding door assemblies
AS/NZS 1576.2:2016	Scaffolding Couplers and accessories
AS/NZS 1577:2013	Scaffold decking components
AS 4132.2-1993	Boat and ship design and construction Aluminium construction
AS 3868-1991	Earth-moving machinery - Design guide for access systems
AS 1657-2013	Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 2047-1999	Windows in buildings - Selection and installation
AS 5047-2005	Hydraulic shoring and trench lining equipment
AS EN 12079.1-2010	Offshore containers and associated lifting sets Offshore containers - Design, manufacture and marking (EN 12079-1:2006, MOD)
AS/NZS 1576.1:1995	Scaffolding General requirements
AS 1796-2001 (R2016)	Certification of welders and welding supervisors
AS 1799.5-1990	Small pleasure boats code Aluminium construction
AS 2047-2014	Windows and external glazed doors in buildings
AS/NZS 4994.4:2018	Temporary edge protection Perimeter protection screens
AS/NZS 1576.2:2009	Scaffolding Couplers and accessories
AS 2809.2:2020	Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
AS 2809.2-1999	Road tank vehicles for dangerous goods Tankers for flammable liquids
AS/NZS 3500.3:2003	Plumbing and drainage Stormwater drainage
AS/NZS 1892.1:1996	Portable ladders Metal
AS 2067-1984	Switchgear assemblies and ancillary equipment for alternating voltages above 1 kV
AS 4866.1-2007	Playing field equipment - Soccer goals Safety aspects
AS 1657-1992	Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 2809.4-2001	Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes
AS 1577-1993	Scaffold planks
AS 2809.2-2008	Road tank vehicles for dangerous goods - Road tank vehicles for flammable liquids
AS/NZS 2041.4:2010	Buried corrugated metal structures Helically formed sinusoidal pipes
AS/NZS 3500.3:2018	Plumbing and drainage Stormwater drainage
AS 1576.4-1991	Scaffolding Suspended scaffolding
AS/NZS 1577:2018	Scaffold decking components
AS/NZS 1576.5:1995	Scaffolding Prefabricated splitheads and trestles
AS/NZS 1576.4:2013	Scaffolding Suspended scaffolding
AS EN 12079.3-2010	Offshore containers and associated lifting sets Periodic inspection, examination and testing (EN 12079-3:2006, MOD)
AS 2809.4:2017	Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes
AS 1657:2018	Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 3500.3:2015	Plumbing and drainage Stormwater drainage

AS/NZS 1665:2004 (R2016)

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

Scope - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

History - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?