AS/NZS 2566.2:2002
Current
Current
The latest, up-to-date edition.
Buried flexible pipelines Installation (Reconfirmed 2016)
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
12-08-2002
Publisher
Specifies requirements for the installation of buried flexible pipelines with structural design in accordance with AS/NZS2566.1.
This Standard specifies requirements for the installation, field testing and commissioning of buried flexible pipelines with structural design in accordance with AS/NZS 2566.1. These pipelines rely primarily upon side support to resist vertical loads without excessive deformation by adopting an elliptical shape.NOTE: Australian and New Zealand Standards generally do not—(a) restate the duties of employers, employees, designers and installers; (b) determine the applicability of regulatory limitations; or(c) determine appropriate health and safety practices.
| Committee |
WS-028
|
| DocumentType |
Standard
|
| ISBN |
0 7337 4667 5
|
| Pages |
82
|
| ProductNote |
Reconfirmed 07/10/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 7/10/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
First published as AS/NZS 2566.2:2002.Reconfirmed 2016. First published as AS/NZS 2566.2:2002. Reissued incorporating Amendment No. 1 (June 2013). Reissued incorporating Amendment No. 2 (May 2018). Reissued incorporating Amendment No. 3 (November 2018).
| AS/NZS 2566.1:1998 | Buried flexible pipelines Structural design |
| AS 1289.5.4.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio |
| AS 1289.5.2.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using modified compactive effort |
| AS 3706.3-2000 | Geotextiles - Methods of test Determination of tearing strength - Trapezoidal method |
| AS 2758.1-1998 | Aggregates and rock for engineering purposes - Concrete aggregates |
| AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
| AS/NZS 2041:1998 | Buried corrugated metal structures |
| AS 1141.51-1996 | Methods for sampling and testing aggregates Unconfined compressive strength of compacted materials |
| AS 3571-1989 | Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications |
| AS 1289.3.2.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the plastic limit of a soil - Standard method |
| AS 3706.1-1990 | Geotextiles - Methods of test - General requirements, sampling, conditioning, basic physical properties and statistical analysis |
| AS 1289.6.3.3-1997 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test (Reconfirmed 2013) |
| AS 3972-1997 | Portland and blended cements |
| AS 4087-1996 | Metallic flanges for waterworks purposes |
| AS 1289.5.3.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus |
| AS/NZS 4130:2001 | Polyethylene (PE) pipes for pressure applications |
| AS 1289.3.4.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil - Standard method |
| AS 4799-2000 | Installation of underground utility services and pipelines within railway boundaries |
| AS 1289.5.5.1-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016) |
| AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS 1289.4.1.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil - Normal method |
| AS 3703.2-1989 | Long-span corrugated steel structures - Design and installation |
| AS 1726-1993 | Geotechnical site investigations |
| AS 1289.5.3.5-1997 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013) |
| AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
| AS 4041-1998 | Pressure piping |
| AS/NZS 1462.1:2001 | Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings |
| AS 3706.9-2001 | Geotextiles Methods of test - Determination of permittivity, permeability and flow rate |
| AS 1289.3.6.1-1995 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving |
| AS 3690-1989 | Installation of ABS pipe systems |
| AS 1289.6.3.2-1997 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9 kg dynamic cone penetrometer test |
| AS 1289.5.8.1-1995 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-density gauge - Direct transmission mode |
| AS 2033-1980 | Installation of polyethylene pipe systems |
| AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
| AS/NZS 4331.2:1995 | Metallic flanges Cast iron flanges (Reconfirmed 2020) |
| AS 3582.1-1998 | Supplementary cementitious materials for use with portland and blended cement Fly ash |
| AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
| AS 2001.2.3-1988 | Methods of test for textiles Physical tests - Determination of breaking force and extension of textile fabrics |
| AS 1289.5.1.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort |
| AS 4321-2001 | Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings (Reconfirmed 2019) |
| AS 1289.5.7.1-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method) |
| AS 1762-1984 | Helical lock-seam corrugated steel pipes - Design and installation |
| AS/NZS 4331.3:1995 | Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020) |
| AS 3706.4-2001 | Geotextiles - Methods of test Determination of burst strength - California bearing ratio (CBR) - Plunger method |
| AS 3798-1996 | Guidelines on earthworks for commercial and residential developments |
| AS 1289.6.9.1-2000 | Methods of testing soils for engineering purposes Soil strength and consolidation test - Determination of stiffness of soil - Clegg impact value (CIV) |
| AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
| AS 2032-1977 | Code of practice for installation of UPVC pipe systems |
| AS 1289.5.3.2-1993 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer |
| AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
| AS 3706.7-1990 | Geotextiles - Methods of test Determination of pore-size distribution - Dry-sieving method |
| AS/NZS 1554.1:2000 | Structural steel welding Welding of steel structures |
| AS 1289.5.6.1-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material (Reconfirmed 2016) |
| AS 3706.5-2000 | Geotextiles - Methods of test Determination of puncture resistance - Drop cone method |
| AS 3571.2-2009 | Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD) |
| AS/NZS 1254:2010 | PVC-U pipes and fittings for stormwater and surface water applications |
| AS/NZS 3518:2013 | Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications |
| AS/NZS 4645.3:2008 | Gas distribution networks Plastics pipe systems |
| AS/NZS 3690:2009 | Installation of ABS pipe systems |
| AS/NZS 2033:2008 | Installation of polyethylene pipe systems |
| AS/NZS 4798(INT):2005 | Polyethylene maintenance shafts |
| AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
| AS/NZS 4765:2007 | Modified PVC (PVC-M) pipes for pressure applications |
| AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
| AS/NZS 1260:2017 | PVC-U pipes and fittings for drain, waste and vent applications |
| AS/NZS 3518:2004 | Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS/NZS 4645.3:2018 | Gas distribution networks Plastics pipe systems |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3084:2017 | Telecommunications installations - Telecommunications pathways and spaces for commercial buildings |
| AS/NZS 5065:2005 | Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017) |
| AS/NZS 4765:2017 | Modified PVC (PVC-M) pipes for pressure applications |
| AS/NZS 2280:2014 | Ductile iron pipes and fittings |
| AS/NZS 2280:2020 | Ductile iron pipes and fittings |
| AS 3571.1-2009 | Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD) |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
| AS/NZS 2032:2006 | Installation of PVC pipe systems |
£127.49
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.