• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 2699.3:2002

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Built-in components for masonry construction Lintels and shelf angles (durability requirements)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

07-11-2002

Preview

1 - AS/NZS 2699.3:2002 BUILT-IN COMPONENTS FOR MASONRY CONSTRUCTION - LINTELS AND SHELF ANGLES (DURABILITY REQUIREMENTS)
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE AND APPLICATION
6 - 1.1.1 Scope
6 - 1.1.2 Application
6 - 1.2 REFERENCED DOCUMENTS
7 - 1.3 NEW TECHNOLOGIES
8 - 1.4 DEFINITIONS
8 - 1.4.1 Duplex coating
8 - 1.4.2 Durability classification (R)
8 - 1.4.3 Galvanized coating
8 - 1.4.4 Inorganic zinc silicate
8 - 1.4.5 Lintel
8 - 1.4.6 Lot
8 - 1.4.7 Masonry couplet
8 - 1.4.8 Organic coating
8 - 1.4.9 Shelf angle
8 - 1.4.10 Specimen
9 - SECTION 2 PERFORMANCE CRITERIA
9 - 2.1 SCOPE OF SECTION
9 - 2.2 AIM
9 - 2.3 SAFETY
9 - 2.4 DURABILITY
9 - 2.4.1 General
9 - 2.4.2 Damage
9 - 2.4.3 Classification of materials
10 - 2.4.4 Durability criteria for lintels
10 - 2.4.5 Test methods
10 - 2.5 IMPACT RESISTANCE
11 - SECTION 3 DEEMED-TO-COMPLY PROVISIONS
11 - 3.1 DURABILITY
11 - 3.2 IMPACT RESISTANCE OF COATINGS ON LINTELS
13 - SECTION 4 IDENTIFICATION MARKS
13 - 4.1 LINTEL MARKING
13 - 4.2 DURABILITY COLOUR CODING
13 - 4.3 PACKAGE MARKING
14 - SECTION 5 ASSESSMENT FOR COMPLIANCE WITH THIS STANDARD
14 - 5.1 GENERAL
14 - 5.2 SAMPLING
14 - 5.3 MANUFACTURERS CERTIFICATE
15 - APPENDIX A - METHOD FOR DETERMINING THE DURABILITY CLASSIFICATION OFBARE LINTELS OR LINTELS WITH A METALLIC COATING
15 - A1 SCOPE
15 - A2 PRINCIPLE
15 - A3 APPARATUS
15 - A4 SAMPLE
15 - A5 PREPARATION OF SPECIMENS
16 - A6 PROCEDURE FOR CORROSION TESTING
16 - A6.2 Test procedure
17 - A6.3 Examination
17 - A6.4 Total coating mass determination
17 - A7 INTERPRETATION OF RESULTS
17 - A7.1 General
18 - A7.2 Interpretation of results for metallic coating
18 - A7.3 Interpretation of results for bare (uncoated) lintels
18 - A8 RECORDS
19 - A9 REPORT
20 - APPENDIX B - METHOD FOR DETERMINING THE DURABILITY CLASSIFICATION OF STEEL LINTELS WITH AN ORGANIC, INORGANIC ZINC...
20 - B1 SCOPE
20 - B2 PRINCIPLE
20 - B3 APPARATUS
20 - B4 SAMPLE
21 - B5 ALKALI SENSITIVITY TEST
21 - B6 CORROSION RESISTANCE TEST
21 - B6.1 Preparation of lintels
21 - B6.2 Preparation of specimens
22 - B6.3 Test procedure
22 - B6.4 Examination of lintels
22 - B6.5 Determination of coating mass of thickness
22 - B6.6 Interpretation of the results
23 - B7 RECORDS
23 - B8 REPORT
24 - APPENDIX C - TEST TO IDENTIFY STAINLESS STEEL GRADE 316 OR 316L
24 - C1 GENERAL
24 - C2 TEST CHEMICALS
24 - C2.1 Solution A
24 - C2.2 Solution B
24 - C3 TEST REQUIREMENTS
24 - C4 TEST METHOD
26 - APPENDIX D - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
26 - D1 SCOPE
26 - D2 STATISTICAL SAMPLING
26 - D3 PRODUCT CERTIFICATION
27 - D4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
27 - D5 OTHER MEANS OF ASSESSMENT
28 - APPENDIX E - METHODS OF TEST FOR IMPACT RESISTANCE OF PAINTED LINTELS
28 - E1 SCOPE
28 - E2 PRINCIPLE
28 - E3 APPARATUS
28 - E3.1 Impact tester
28 - E3.2 Test panels
29 - E3.3 Magnifier
29 - E3.4 Steel tape
29 - E4 TEST CONDITIONS
29 - E5 PREPARATION OF TEST PANELS
29 - E6 TEST PROCEDURE
30 - E7 EXPRESSION OF RESULT

Sets out the requirements for methods of testing the durability performance of steel lintel and shelf angles that are built into masonry.

This Standard specifies requirements and methods of test for durability performance of steel lintels and shelf angles to be built into masonry. NOTES: 1 This Standard does not cover requirements for structural design or the method of its determination. Details for these are given by NZS 3404, AS 3700, AS 4100, NZS 4210 or AS/NZS 4600. 2 The design and installation requirements for lintels and shelf angles are specified in AS 3700 and NZS 4203. 3 Throughout this Standard, lintel signifies lintel or shelf angle, unless stated otherwise. 4 Lintels with a high durability classification may be used for less severe corrosion conditions. 5 The durability performance categories employed in this Standard are compatible with the environments specified in AS 3700, NZS 3604 and AS/NZS 2312.

Committee
BD-028
DocumentType
Standard
ISBN
0 7337 4878 3
Pages
25
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes

First published as AS/NZS 2699.3:2000.Second edition 2002. Originated as AS/NZS2699.3:2000. Second edition 2002.

AS/NZS 3750.14:1997 Paints for steel structures High-build epoxy (two-pack)
AS 3750.1-1994 Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel
AS/NZS 4791:1999 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process
AS 1580.481.1.10-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling
AS/NZS 4600:1996 Cold-formed steel structures
AS 1627.4-2002 Metal finishing - Preparation and pretreatment of surfaces - Abrasive blast cleaning
AS 1580.481.3-1992 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 1580.406.1-1993 Paints and related materials - Methods of test Resistance to impact - Falling weight test (Gardner-type tester)
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS 2331.2.1-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical
HB 18.28-1991 Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
AS 4100-1998 Steel structures (Reconfirmed 2016)
AS/NZS 3750.13:1997 Paints for steel structures Epoxy primer (two-pack)
AS 2331.3.1-2001 Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017)
AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 1580.481.1.9-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering
AS/NZS 3750.15:1998 Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013)
HB 73.1-1995 Handbook of Australian Paint Standards General
AS 3700-2001 Masonry structures
AS 3942-1993 Quality control - Variables charts - Guide
AS/NZS 4680:1999 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
AS 3894.3-2002 Site testing of protective coatings Determination of dry film thickness (Reconfirmed 2013)

AS 3700 SUPP 1-2004 Masonry structures - Commentary (Supplement to AS 3700-2001)
AS 3700:2018 Masonry Structures
AS 3700:2018 Sup 1:2020 Masonry structures - Commentary (Supplement 1 to AS 3700:2018)
AS 4773.2-2010 Masonry in small buildings - Construction
AS 3700-2001 Masonry structures
AS 3700-2011 Masonry structures
AS 4773.1-2010 Masonry in small buildings - Design

View more information
£29.63
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.