• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 5000.1:2005

Current
Current

The latest, up-to-date edition.

Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

17-11-2005

Preview

Specifies the construction, dimensions and test requirements for single- and multicore cables insulated with polymeric materials intended for use at working voltages up to and including 0.6/1 (1.2) kV. It does not apply to polymeric insulated cables for special installations and service conditions or for which there are separate Australian/New Zealand Standards.

This Standard specifies construction, dimensions and tests for single- and multicore cables insulated with polymeric materials intended for use in electrical installations at working voltages up to and including 0.6/1 (1.2)kV.It does not apply to polymeric insulated cables for special installations and service conditions or for which there are separate Australian/New Zealand Standards, e.g. neutral screened cables, welding cables, flexible cords and aerial bundled cables.NOTES: 1 Purchasing guidelines are contained in AppendixA.2 AS/NZS3008.1 should be referenced to assist correct cable size selection for the intended application and installation.

Committee
EL-003
DocumentType
Standard
ISBN
0 7337 7004 5
Pages
25
ProductNote
Reconfirmed 20/01/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 20/01/2017
PublisherName
Standards Australia
Status
Current
Supersedes
UnderRevision

First published in Australia as part of AS C50-1928.Second edition 1939 (being endorsement of BS 7-1939 with amendments).AS C116 first published 1941.AS C130 first published 1941.AS (E)C502 first published 1943.AS C50-1939, AS C116-1941, AS C130-1941 and AS (E)C502-1943 revised, amalgamated and designated AS C116-1950.AS C147 first published 1950.Third edition AS C116-1955.Second edition AS C147-1955.AS C178 first published 1966.Fourth edition AS C116-1967.Third edition AS C147-1967.Fourth edition 1969.Fourth edition AS C116-1970.AS C189 first published 1971.Fifth edition AS C147-1972.Sixth edition AS C116-1972.Revised and redesignated in part as AS 3116-1974.AS C189-1971 and part of AS C147-1972 revised, amalgamated and redesignated AS 3147-1974.AS C178-1966 revised and redesignated in part as AS 3178-1975.AS C189-1971 withdrawn 1976.AS C147-1972 withdrawn 1976.Second edition AS 3147-1976.Second edition AS 3116-1976.AS 3198 first published 1977.Second edition AS 3178-1978.Third edition AS 3116-1981.Third edition AS 3147-1981.Fourth edition 1988.Fourth edition AS 3116-1990.Second edition AS 3198-1990.Third edition AS 3178-1991.Fifth edition AS 3147-1992.First published in New Zealand as NZS/AS 3198-1990.NZS/AS 3116 first published 1990. NZS/AS 3198-1990 jointly revised and designated as AS/NZS 3198:1996.NZS/AS 3116-1990 jointly revised and designated as AS/NZS 3116:1996.AS 3147-1992, AS/NZS 3116:1996 and AS/NZS 3198:1996 jointly revised, amalgamated and redesignated AS/NZS 5000.1:1999.AS 3178-1991 and AS/NZS 5000.1:1999 jointly revised, amalgamated and redesignated AS/NZS 5000.1:2003.Third edition 2005.Reconfirmed 2017. Originated as AS/NZS 5000.1:1999. Second edition 2003, incorporating AS 3178-1991. Third edition 2005. Reissued incorporating Amendment No. 1 (December 2006).

AS/NZS 4507:1998 Cables - Fire performance
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3560.2:2003 Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1 (1.2) kV Copper conductors
AS/NZS 1660.1:1998 Test methods for electric cables, cords and conductors Conductors and metallic components (Reconfirmed 2017)
AS/NZS 3008.1.2:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions
AS/NZS 1660.2.3:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials (Reconfirmed 2017)
AS/NZS 1125:2001 Conductors in insulated electric cables and flexible cords (Reconfirmed 2017)
AS/NZS 3808:2000 Insulating and sheathing materials for electric cables
AS/NZS 4961:2003 Electric cables - Polymeric insulated - For distribution and service applications (Reconfirmed 2017)
AS/NZS 1660.5.6:2005 Test methods for electric cables, cords and conductors Fire tests - Test for vertical flame propagation for a single insulated wire or cable
AS/NZS 1660.3:1998 Test methods for electric cables, cords and conductors Electrical tests (Reconfirmed 2017)
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS/NZS 1660.2.2:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials (Reconfirmed 2017)
AS 3008.1-1989 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV
AS/NZS 3008.1.1:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 2893:2002 Electric cables - Lead and lead alloy sheaths - Composition
AS/NZS 3863:2002 Galvanized mild steel wire for armouring of cables
AS/NZS 1660.2.1:1998 Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application (Reconfirmed 2017)
AS/NZS 3560.1:2000 Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV Aluminium conductors (Reconfirmed 2021)

AS/ACIF S008-2006 Requirements for customer cabling products
AS/NZS 3001:2001 Electrical installations - Relocatable premises (including caravans and tents) and their site installations
AS/NZS 3012:2010 Electrical installations - Construction and demolition sites
AS/NZS 2243.6:2010 Safety in laboratories Plant and equipment aspects
AS/NZS 3015:2004 Electrical installations - Extra-low voltage d.c. power supplies and service earthing within public telecommunications networks
AS/NZS 3003:2018 Electrical installations - Patient areas
AS/NZS 1768:2007 Lightning protection
AS 2832.1-2004 Cathodic protection of metals Pipes and cables
AS/NZS 5000.2:2006 Electric cables - Polymeric insulated For working voltages up to and including 450/750 V (Reconfirmed 2017)
AS 1530.4-2005 Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction
AS/NZS 4026:2001 Electric cables - For underground residential distribution systems
AS/NZS 2802:2000 Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020)
AS/NZS 3004.2:2008 Electrical installations - Marinas and recreational boats Recreational boats installations
AS/NZS 1972:2006 Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020)
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 3003:2003 Electrical installations - Patient treatment areas of hospitals and medical, dental practices and dialyzing locations
AS/NZS 3003:2011 Electrical installations - Patient areas
AS 2353:2018 Pedestrian push-button assemblies
AS 2144:2014 Traffic signal lanterns
AS/NZS 1802:2003 Electric cables - Reeling and trailing - For underground coal mining purposes
AS/NZS 4026:2008 Electric cables - For underground residential distribution systems
AS/NZS 3008.1.2:2010 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3123:2005 Approval and test specification - Plugs, socket-outlets and couplers for general industrial application (Reconfirmed 2016)
AS/NZS 3004.1:2008 Electrical installations - Marinas and recreational boats Marinas
AS/NZS 1802:2018 Electric cables - Reeling and trailing - For underground coal mining
AS/NZS 4703:2007 Electrical wiring in furniture (Reconfirmed 2018)
AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance - General requirements
AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements (Reconfirmed 2020)
AS/NZS 5139:2019 Electrical installations - Safety of battery systems for use with power conversion equipment
AS/NZS 3001:2008 Electrical installations - Transportable structures and vehicles including their site supplies
AS/NZS 3004:2002 Electrical installations - Marinas and pleasure craft at low-voltage
AS/NZS 2201.1:2007 Intruder alarm systems Client’s premises - Design, installation, commissioning and maintenance
AS 2832.2-2003 Cathodic protection of metals Compact buried structures
AS/NZS 3008.1.1:2009 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS 2832.3-2005 Cathodic protection of metals Fixed immersed structures
AS 2832.5-2008 Cathodic protection of metals Steel in concrete structures
AS/NZS 3008.1.2:2017 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS/NZS 3439.1:2002 Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD)
AS/NZS 1299:2009 Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020)
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 2832.4-2006 Cathodic protection of metals Internal surfaces (Reconfirmed 2016)
AS/NZS 2144:2002 Traffic signal lanterns

View more information
£57.88
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.