• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 5065:2005

Current
Current

The latest, up-to-date edition.

Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

18-10-2005

Preview

Specifies requirements for polyethylene (PE) and polypropylene (PP) pipes and fittings for sewerage and drainage applications, above and below ground, inside and outside of buildings, and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Includes requirements for both plain and structured wall pipes and fittings.

This Standard specifies requirements for polyethylene (PE) and polypropylene (PP) pipes and fittings for sewerage and drainage applications, above and below ground, inside and outside of buildings, and intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. It includes requirements for both plain and structured wall pipes and fittings.Pipes manufactured to this Standard are intended to be installed in accordance with AS2033, AS/NZS2566.2, AS/NZS3500.2, AS/NZS3500.3, WSA02 and other utility/authority requirements.

Committee
PL-006
DocumentType
Standard
ISBN
0 7337 6948 9
Pages
30
ProductNote
Reconfirmed 27/01/2016.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 27/01/2017
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS/NZS5065:2005.
Reconfirmed 2017. First published as AS/NZS 5065:2005. Reissued incorporating Amendment No. 1 (February 2010). Reissued incorporating Amendment No. 2 (November 2018).

AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings
AS 2033-1980 Installation of polyethylene pipe systems
AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
AS/NZS 1462.13(INT):2001 Methods of test for plastics pipes and fittings Method for the determination of elastomeric seal joint contact width and pressure
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS/NZS 1462.8:1998 Methods of test for plastics pipes and fittings Method of test for infiltration
AS/NZS 2566.2:2002 Buried flexible pipelines Installation (Reconfirmed 2016)
AS/NZS 1462.25:2005 Methods of test for plastics pipes and fittings Determination of slow-crack-growth of PE (polyethylene) resins - Notched, constant ligament-stress (NCLS) method (Reconfirmed 2017)
AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
AS/NZS 1462.23:1997 Methods of test for plastics pipes and fittings - Method for determination of ring flexibility
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 1462.28:2003 Methods of test for plastics pipes and fittings Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds (Reconfirmed 2017)
AS 1745.2-1989 Outdoor weathering of plastics in the Australian environment - Guide for design purposes
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
AS/NZS 1462.22:1997 Methods of test for plastics pipes and fittings Method for determination of pipe stiffness
AS/NZS 1462.26:2003 Methods of test for plastics pipes and fittings Determination of weathering resistance of plastics pipes for external storage (Reconfirmed 2017)
AS/NZS 1462.4:2002 Methods of test for plastics pipes and fittings Method for determining reversion of plastics pipes (Reconfirmed 2017)
AS/NZS 1462.10:1998 Methods of test for plastics pipes and fittings Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications (Reconfirmed 2017)
AS/NZS 2566.1:1998 Buried flexible pipelines Structural design
AS 2887-1993 Plastic waste fittings
AS/NZS 1477:1999 PVC pipes and fittings for pressure applications
HB 18.28-1991 Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
AS 1145.2-2001 Determination of tensile properties of plastics materials Test conditions for moulding and extrusion plastics
AS/NZS 1462.1:2001 Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings

AS 5200.000-2006 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)
AS/NZS 3500.2:2018 Plumbing and drainage Sanitary plumbing and drainage
ATS 5200.055-2008 Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications
AS/NZS 2033:2008 Installation of polyethylene pipe systems
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage

View more information
£68.93
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.