AS/NZS 60079.14:2009
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
18-09-2009
Adopts IEC 60079-14, ED.4.0(2007) with national modifications to specify requirements for the design selection and erection of electrical installations in hazardous areas associated with explosive atmospheres.
Committee |
EL-014
|
DocumentType |
Standard
|
ISBN |
0 7337 9242 1
|
Pages |
116
|
PublisherName |
Standards Australia
|
Status |
AvailableSuperseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
First published as AS/NZS 60079.14:2009.
AS/NZS 1826:2008 | Electrical equipment for explosive gas atmospheres - Special protection - Type of protection ‘s’ |
AS/NZS 60079.29.2:2008 | Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
AS/NZS 60079.25:2004 | Electrical apparatus for explosive gas atmospheres Intrinsically safe systems |
AS/NZS 60079.26:2007 | Explosive atmospheres Equipment with equipment protection level (EPL) Ga |
AS 2832.5-2008 | Cathodic protection of metals Steel in concrete structures |
AS 1828-1984 | Electrical equipment for explosive atmospheres - Cable glands |
AS 60034.11-2009 | Rotating electrical machines Thermal protection |
AS 3011.1-1992 | Electrical installations - Secondary batteries installed in buildings - Vented cells Vented cells |
AS/NZS 60079.12:2000 | Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents |
AS 3011.2-1992 | Electrical installations - Secondary batteries installed in buildings Sealed cells |
AS/NZS 60079.15:2006 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus |
AS/NZS 60079.0:2008 | Explosive atmospheres Equipment - General requirements |
AS/NZS 60079.2:2007 | Explosive atmospheres Equipment protection by pressurized enclosure 'p' |
AS/NZS 1768:2007 | Lightning protection |
AS/NZS 60079.28:2007 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
AS 1482-1985 | Electrical equipment for explosive atmospheres - Protection by ventilation - Type of protection v (Reconfirmed 2013) |
AS 2380.7-1987 | Electrical equipment for explosive atmospheres - Explosion-protection techniques - Intrinsic safety i |
AS/NZS 61241.11:2006 | Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety iD |
AS 2380.4-1994 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Pressurized rooms or pressurized enclosures (Reconfirmed 2013) |
AS/NZS 60079.1:2007 | Explosive atmospheres Equipment protection by flameproof enclosures 'd' |
AS 60034.5-2009 | Rotating electrical machines Degrees of protection provided by the integral design of rotating electrical machines (IP Code) - Classification |
AS/NZS 60079.6:2007 | Explosive atmospheres Equipment protection by oil immersion 'o' |
AS 1852.826-1983 | International electrotechnical vocabulary - Electrical installations of buildings |
AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
AS/NZS 61241.18:2005 | Electrical apparatus for use in the presence of combustible dust Protection by encapsulation 'mD' |
AS 1681-2002 | Safety requirements for electrically heated Type 1 ovens in which flammable volatiles occur (Reconfirmed 2013) |
AS/NZS 4871.2:2002 | Electrical equipment for coal mines, for use underground Distribution, control and auxiliary equipment |
AS/NZS 60079.1.1:2002 | Electrical apparatus for explosive gas atmospheres Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap |
AS 2832.3-2005 | Cathodic protection of metals Fixed immersed structures |
AS 60034.1-2009 | Rotating electrical machines Rating and performance |
AS/NZS 4871.4:2002 | Electrical equipment for coal mines, for use underground Mains powered electrical mobile machines |
AS/NZS 61241.2.1:2000 | Electrical apparatus for use in the presence of combustible dust Test methods - Methods for determining the minimum ignition temperature of dust |
AS 2832.4-2006 | Cathodic protection of metals Internal surfaces (Reconfirmed 2016) |
AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
AS/NZS 1972:2006 | Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020) |
AS 2832.1-2004 | Cathodic protection of metals Pipes and cables |
AS/NZS 4871.6:2007 | Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment |
AS 2380.9-1991 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Type of protection n - Non-sparking |
AS/NZS 60079.7:2006 | Explosive atmospheres Equipment protection by increased safety 'e' |
AS 1300-1989 | Electrical equipment for coal mines - Bolted flame-proof cable coupling devices |
AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 2053.2:2001 | Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016) |
AS/NZS 3191:2008 | Electric flexible cords (Reconfirmed 2019) |
AS/NZS 60079.20:2000 | Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus |
AS/NZS 2229:2004 | Fuel dispensing equipment for explosive atmospheres |
AS/NZS 2053.1:2001 | Conduits and fittings for electrical installations General requirements (Reconfirmed 2016) |
AS 2380.2-1991 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Flameproof enclosure d |
AS 2676.1-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Vented cells |
AS/NZS 4114.1:2003 | Spray painting booths, designated spray painting areas and paint mixing rooms Design, construction and testing |
AS 2380.6-1988 | Electrical equipment for explosive atmospheres - Explosion-protection techniques Increased safety |
AS 2676.2-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Sealed cells |
AS/NZS 4871.1:2002 | Electrical equipment for coal mines, for use underground General requirements |
AS/NZS 4871.3:2002 | Electrical equipment for coal mines, for use underground Substations |
AS/NZS 61241.4:2002 | Electrical apparatus for use in the presence of combustible dust Type of protection 'pD' |
AS/NZS 2290.1:2005 | Electrical equipment for coal mines - Introduction and maintenance - For hazardous areas |
AS/NZS 2053.5:2001 | Conduits and fittings for electrical installations Corrugated conduits and fittings of insulating material (Reconfirmed 2016) |
AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
AS/NZS 1020:1995 | The control of undesirable static electricity |
AS/NZS 60079.18:2005 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection encapsulation m electrical apparatus |
AS/NZS 3800:2005 | Electrical equipment for explosive atmospheres - Repair and overhaul |
AS/NZS 2243.8:2006 | Safety in laboratories - Fume cupboards |
AS 2832.2-2003 | Cathodic protection of metals Compact buried structures |
AS/NZS 60079.5:2007 | Explosive atmospheres Equipment protection by powdered filling 'q' |
AS/NZS 1802:2003 | Electric cables - Reeling and trailing - For underground coal mining purposes |
AS/NZS 60079.27:2008 | Explosive atmospheres Fieldbus intrinsically safe concept (FISCO) |
AS 60034.17-2009 | Rotating electrical machines Cage induction motors when fed from converters - Application guide |
AS 60034.12-2009 | Rotating electrical machines Starting performance of single-speed three-phase cage induction motors |
AS/NZS 4761.1:2008 | Competencies for working with electrical equipment for hazardous areas (EEHA) Competency Standards |
AS/NZS 4871.5:2002 | Electrical equipment for coal mines, for use underground Battery powered electrical mobile machines |
AS/NZS 2053.7:2002 | Conduits and fittings for electrical installations Rigid metal conduits and fittings (Reconfirmed 2016) |
AS/NZS 2053.8:1995 | Conduits and fittings for electrical installations Flexible conduits and fittings of metal or composite material (Reconfirmed 2016) |
AS 1929-2009 | Non-destructive testing - Glossary of terms (Reconfirmed 2019) |
AS/NZS 60079.10:2004 | Electrical apparatus for explosive gas atmospheres Classification of hazardous areas (IEC 60079-10:2002 MOD) |
AS/NZS 61241.1:2005 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures 'tD' |
AS/NZS 60079.11:2006 | Explosive atmospheres Equipment protection by intrinsic safety 'i' |
AS/NZS 60079.29.1:2008 | Explosive atmospheres Gas detectors - Performance requirements of detectors for flammable gases |
AS/NZS 61241.10:2005 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
AS/NZS 4114.2:2003 | Spray painting booths, designated spray painting areas and paint mixing rooms - Installation and maintenance |
AS 4647-2011 | Diaphragm gas meters |
AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
AS 1940:2017 | The storage and handling of flammable and combustible liquids |
AS/NZS 1716:2012 | Respiratory protective devices |
AS/NZS 3010:2017 | Electrical installations - Generating sets |
AS/NZS 4836:2011 | Safe working on or near low-voltage electrical installations and equipment |
AS/NZS 60079.20.1:2012 | Explosive atmospheres Material characteristics for gas and vapour classification - Test methods and data |
AS/NZS 4871.6:2013 | Electrical equipment for mines and quarries Diesel powered machinery and ancillary equipment |
SA HB 148:2016 | LP Gas leak identification and assessment of in-service road tankers |
AS/NZS 60079.33:2012 | Explosive atmospheres Equipment protection by special protection 's' |
AS/NZS 2081:2011 | Electrical protection devices for mines and quarries (Reconfirmed 2022) |
AS/NZS 4745:2012 | Code of practice for handling combustible dusts |
AS/NZS 2290.1:2014 | Electrical equipment for coal mines - Introduction, inspection and maintenance For hazardous areas |
HB 239:2011 | Guidance on the repair and overhaul of electrical equipment for explosive atmospheres |
AS/NZS 3084:2017 | Telecommunications installations - Telecommunications pathways and spaces for commercial buildings |
AS/NZS 5026:2012 | The storage and handling of Class 4 dangerous goods |
AS/NZS 1680.2.4:2017 | Interior and workplace lighting Industrial tasks and processes |
AS/NZS 60079.15:2011 | Explosive atmospheres Equipment protection by type of protection 'n' |
AS ISO 21789:2014 | Gas turbine applications - Safety |
AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
AS/NZS 4871.3:2010 | Electrical equipment for mines and quarries Substations |
AS 1375-2013 | Industrial fuel-fired appliances |
AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
AS/NZS 1596:2014 | The storage and handling of LP Gas |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.