• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS ISO 9000.1:1994

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Quality management and quality assurance standards Guidelines for selection and use
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

30-06-2017

Language(s)

English

Published date

01-01-1994

Preview

1 - AS/NZS ISO 9000.1:1994 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDELINES FOR SELECTION AND USE
4 - Preface
5 - Contents
8 - Introduction
7 - Foreword
10 - 1 Scope
10 - 2 Normative reference
10 - 3 Definitions
11 - 3.1 hardware:
11 - 3.2 software:
11 - 3.3 processed material:
11 - 3.4 industry/economic sector:
11 - 3.5 stakeholder:
11 - 3.6 ISO 9000 family:
11 - 4 Principal concepts
11 - 4.1 Key objectives and responsibilities for quality
12 - 4.2 Stakeholders and their expectations
12 - 4.3 Distinguishing between quality system requirements and product requirements
12 - 4.4 Generic product categories
12 - 4.5 Facets of quality
13 - 4.6 Concept of a process
14 - 4.7 Network of processes in an organization
15 - 4.8 Quality system in relation to the network of processes
15 - 4.9 Evaluating quality systems
15 - 4.9.1 General
15 - 4.9.2 Management review
15 - 4.9.3 Quality system audits
15 - 5 Roles of documentation
15 - 5.1 Value of documentation
16 - 5.2 Documentation and evaluation of quality systems
16 - 5.3 Documentation as a support for quality improvement
16 - 5.4 Documentation and training
16 - 6 Quality system situations
17 - 7 Selection and use of International Standards on quality
17 - 7.1 General
17 - 7.2 Selection and use
17 - 7.3 Application guidelines
18 - 7.4 Software
18 - 7.5 Dependability
18 - 7.6 Quality assurance: design, development, production, installation and servicing
18 - 7.7 Quality assurance: production, installation and servicing
18 - 7.8 Quality assurance: final inspection and test
18 - 7.9 Quality management
19 - 7.10 Services
19 - 7.11 Processed materials
19 - 7.12 Quality improvement
19 - 7.13 Audits
19 - 7.14 Auditors
19 - 7.15 Managing audits
20 - 7.16 Quality assurance for measurement
20 - 8 Selection and use of International Standards for external quality assurance
20 - 8.1 General guidance
20 - 8.2 Selection of model
20 - 8.2.1 Three models for quality assurance
20 - 8.2.2 Selection
20 - 8.3 Demonstration of conformance to the selected model
21 - 8.4 Additional considerations in contractual situations
21 - 8.4.1 Tailoring and contractual elements
21 - 8.4.2 Review of contractual quality system elements
21 - 8.4.3 Supplementary quality assurance requirements
21 - 8.4.4 Pre-contract assessment
21 - 8.4.5 Audits after award of the contract
22 - Annex A - Terms and definitions taken from ISO 8402:1994
22 - A.1 quality:
22 - A.2 quality policy:
22 - A.3 quality management:
22 - A.4 quality system:
22 - A.5 quality control:
23 - A.6 quality assurance:
23 - A.7 quality improvement:
23 - A.8 product:
23 - A.9 service:
23 - A.10 customer:
23 - A.11 supplier:
23 - A.12 process:
24 - Annex B - Product and process factors
24 - B.1 Purpose
24 - B.2 Factors
25 - Annex C - Proliferation of standards
26 - Annex D - Cross-reference list of clause numbers for corresponding topics
27 - Annex E - Bibliography
28 - Appendix ZZ - Guidance on Australian and New Zealand Standards for quality management, quality control and quality assurance

Provides guidance for the selection and use of the ISO 9000 family of International Standards on quality management and quality assurance. Clarifies the principal quality-related concepts needed for effective understanding and application of the Standards, and the distinctions and interrelationships between them. This Standard is identical with and has been reproduced from ISO 9000-1:1994.

This part of ISO 9000a) clarifies principal quality-related concepts and the distinctions and interrelationships among them;b) provides guidance for the selection and use of the ISO 9000 family of International Standards on quality management and quality assurance.

Committee
QR-008
DocumentType
Standard
ISBN
0 7262 9202 8
Pages
21
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
ISO 9000-1:1994 Identical

Under Revision see DR 99128 (in part) First published in Australia as AS 3900-1987/ISO 9000:1987.First published in New Zealand as NZS 5600.1:1987.AS 3900-1987/ISO 9000:1987 and NZS 5600.1:1987 redesignated in 1990 as Joint Standard AS 3900-1987/NZS 9000:1990/ISO 9000:1987.Redesignated in 1992 as Joint Standard AS 3900.1-1987/NZS 9000:1990/ISO 9000:1987.Jointly revised and redesignated as Joint Standard AS/NZS ISO 9000.1:1994. First published in Australia as AS 3900-1987/ISO 9000:1987. First published in New Zealand as NZS 5600.1:1987. AS 3900-1987/ISO 9000:1987 and NZS 5600.1:1987 redesignated in 1990 as Joint Standard AS 3900-1987/NZS 9000:1990/ISO 9000:1987. Redesignated in 1992 as Joint Standard AS 3900.1-1987/NZS 9000:1990/ISO 9000:1987. Jointly revised and redesignated as Joint Standard AS/NZS ISO 9000.1:1994.

AS/NZS 3750.15:1998 Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013)
AS 1444-1996 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
HB 97-1997 Integrating quality and environmental management systems ISO 9001 and ISO 14001
AS 4429(INT)-1996 Methods of test and rating requirements for smoke-spill fans
AS 1418.10-1996 Cranes (including hoists and winches) - Elevating work platforms
AS 1324.1-1996 Air filters for use in general ventilation and airconditioning - Application, performance and construction
AS/NZS 1859.3:1996 Reconstituted wood-based panels - Decorative overlaid wood panels
AS 1380.1-1998 Fibre-rope slings - Product specification
AS/NZS 2908.1:2000 Cellulose-cement products Corrugated sheets (Reconfirmed 2020)
AS 2076-1996 Wire-rope grips for non-lifting applications
AS 4751(INT)-2000 Electrogalvanized (zinc) coatings on ferrous open sections
AS 1085.16-1995 Railway permanent way material - Part 16: Cast sleeper plates
AS 4421-1996 Guards and patrols
AS/NZS 1859.1:1997 Reconstituted wood-based panels - Particleboard
AS/NZS 4256.5:1996 Plastic roof and wall cladding materials Polycarbonate
AS 1085.13-1998 Railway permanent way material - Part 13: Spring fastening spikes for sleeper plates
AS 1438.1-1998 Wire-coil flat slings Product specification
AS/NZS 2904:1995 Damp-proof courses and flashings
AS 1332-2000 Conveyor belting - Textile reinforced (Reconfirmed 2016)
AS 1085.12-1999 Railway permanent way materials - Part 12: Insulated joint assemblies
AS 1353.1-1997 Flat synthetic-webbing slings Product specification (Reconfirmed 2014)
AS 2947.3-1995 Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Couplings
AS 2047-1999 Windows in buildings - Selection and installation
AS/NZS 3809:1998 Safes and strongrooms
AS 2766-1997 Petri dishes - Plastic - For single use
AS/NZS 2179.2(INT):1998 Specifications for rainwater goods, accessories and fasteners - PVC rainwater goods and accessories
AS/NZS 2080:1995 Safety glass for land vehicles
AS 1731.2-2000 Refrigerated display cabinets General mechanical and physical requirements
AS/NZS 3905.2:1997 Quality system guidelines Guide to AS/NZS ISO 9001, AS/NZS ISO 9002, and AS/NZS ISO 9003 for construction
AS/NZS 2272:1996 Plywood - Marine
AS/NZS 4256.1:1994 Plastic roof and wall cladding materials General requirements
AS/NZS 1260:1996 PVC pipes and fittings for drain, waste and vent applications
AS 4750(INT)-2000 Electrogalvanized (zinc) coatings on ferrous hollow sections
AS/NZS 1314:2003 Prestressing anchorages (Reconfirmed 2016)
AS 4454-1999 Compost, soil conditioners and mulches
AS/NZS 4371:1996 Ceramic tableware
AS 2492-1994 Cross-linked polyethylene (PE-X) pipe for hot and cold water applications
AS/NZS 4256.3:1994 Plastic roof and wall cladding materials Glass fibre reinforced polyester (GRP)
AS/NZS 4256.2:1994 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets
AS/NZS 3750.13:1997 Paints for steel structures Epoxy primer (two-pack)
AS/NZS 2343:1997 Bullet-resistant panels and elements
AS/NZS 3879:1995 Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings
AS/NZS 1748:1997 Timber - Stress-graded - Product requirements for mechanically stress-graded timber
AS/NZS 4380:1996 Cargo restraint systems - Webbing load restraint systems
AS/NZS 4792:1999 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process
AS/NZS 1477:1996 PVC pipes and fittings for pressure applications
AS/NZS 2544:1995 Grey iron pressure fittings
AS/NZS 3905.4:1995 Quality system guidelines - Guide to quality system Standards AS/NZS ISO 9001:1994 and AS/NZS ISO 9002:1994 for the pressure equipment industry
AS/NZS 3842:1998 Guide 62: General requirements for bodies operating assessment and certification/registration of quality systems
AS/NZS 4130:1997 Polyethylene (PE) pipes for pressure applications
AS 1085.8-1995 Railway permanent way material - Part 8: Dogspikes
AS/NZS 4131:1997 Polyethylene (PE) compounds for pressure pipes and fittings
AS/NZS 4158:1996 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
AS/NZS 1859.4:1997 Reconstituted wood-based panels Hardboard
AS 4441(INT)-1996 Oriented PVC (OPVC) pipes for pressure applications
AS/NZS 1221:1997 Fire hose reels (Reconfirmed 2020)
AS 4497.1-1997 Roundslings - Synthetic fibre - Product specification
AS/NZS 4791:1999 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process
AS/NZS 1605:2000 Methods for sampling and analysing timber preservatives and preservative-treated timber
AS/NZS 4065:2000 Concrete utility services poles
AS 2047.1-1996 Windows in buildings - Specification for materials and performance
AS/NZS 2699.3:2000 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 2913-2000 Evaporative airconditioning equipment (Reconfirmed 2016)
AS/NZS 2588:1998 Gypsum plasterboard (Reconfirmed 2016)
AS/NZS 4357:1995 Structural Laminated Veneer Lumber
AS 3533.1-1997 Amusement rides and devices - Design and construction
AS 1085.15-1995 Railway permanent way material - Part 15: Aluminothermic rail welding
AS/NZS 4677:2000 Steel utility services poles
AS/NZS 4256.4:1995 Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) wall cladding boards
AS/NZS 3750.14:1997 Paints for steel structures High-build epoxy (two-pack)
AS/NZS 4345:1995 Cargo restraint systems - Transport fibre rope
AS/NZS 3750.17:1998 Paints for steel structures Etch primers (single pack and two-pack) (Reconfirmed 2013)
AS/NZS 1594:1997 Hot-rolled steel flat products
AS 1085.4-1999 Railway permanent way material - Part 4: Fishbolts and nuts
AS 4290-2000 Design and installation of Revolving doors
AS/NZS 1595:1998 Cold-rolled, unalloyed, steel sheet and strip (Reconfirmed 2016)
AS/NZS 4344:1995 Cargo restraint systems - Transport chain and components
AS 1085.14-1997 Railway permanent way material - Part 14: Prestressed concrete sleepers
AS 4429-1999 Methods of test and rating requirements for smoke-spill fans
AS 4454-1997 Composts, soil conditioners and mulches
AS 3582.1-1998 Supplementary cementitious materials for use with portland and blended cement Fly ash
AS 2317-1998 Collared eyebolts
AS/NZS 2699.2:2000 Built-in components for masonry construction Connectors and accessories
AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
AS 1666.1-1995 Wire-rope slings - Product specification
AS 2537-1994 Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications
AS 2216-1997 Packaging for poisonous substances
AS 3905.10-1997 Quality system guidelines - Guide to AS/NZS ISO 9001:1994 for the finance industry
AS 1085.1-2000 Railway permanent way material Steel rails
AS/NZS 4455:1997 Masonry units and segmental pavers
AS/NZS 2280:1995 Ductile iron pressure pipes and fittings
AS/NZS 1859.2:1997 Reconstituted wood-based panels - Medium density fibreboard (MDF)
AS/NZS 3750.6:1995 Paints for steel structures - Full gloss polyurethane (two-pack)
AS/NZS 3750.16:1998 Paints for steel structures Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel (Reconfirmed 2013)
AS/NZS 3905.14:1998 Quality system guidelines - Guide to AS/NZS ISO 9001, 9002 and 9003 for health services
AS 3818.1-1998 Timber - Heavy structural products - Visually graded General requirements
AS/NZS 4129(INT):1997 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 3905.12:1999 Quality system guidelines - Guide to AS/NZS ISO 9001 for architectural and engineering design practices
AS 3743-1996 Potting mixes
AS 3771-1998 Road lighting luminaires with integral control gear
AS/NZS 4534:1998 Zinc and zinc/aluminium-alloy coatings on steel wire
AS/NZS 4290:1995 Design and installation of revolving doors
AS 1890-1999 Thermally released links (Reconfirmed 2016)
AS/NZS 2699.1:2000 Built-in components for masonry construction Wall ties
AS 1672.1-1997 Limes and limestones Limes for building
AS 1085.10-1995 Railway permanent way material - Part 10: Rail anchors
AS/NZS 2648.1:1995 Underground marking tape Non-detectable tape (Reconfirmed 2020)
AS 4285-1995 Skylights
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS 1597.2-1996 Precast reinforced concrete box culverts Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height)
AS/NZS 4049.3:1996 Paints and related materials - Road marking materials - Waterborne paint - For use with drop-on beads
AS 1085.3-2000 Railway permanent way material - Part 3: Sleeper plates
AS/NZS 4452:1997 The storage and handling of toxic substances
AS/NZS 3679.2:1996 Structural steel - Welded I sections
AS/NZS 4680:1999 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles
AS/NZS 2041:1998 Buried corrugated metal structures
AS/NZS 2208:1996 Safety glazing materials in buildings
AS/NZS 1859.5:1997 Reconstituted wood-based panels Fibre insulating board (insulation board)

View more information
£50.86
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.