|
PREN 13774 : DRAFT 2011
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
EN 13175 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
DIN EN 13547 : 2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
CSA B45 SERIES : 2002
|
PLUMBING FIXTURES |
|
CSA B125.37 : 2015
|
PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES |
|
SAE J 2552 : 2014
|
PUSH-ON HOSE AND MATING HOSE FITTINGS |
|
CSA 6.24 : 2015
|
GAS CONVENIENCE OUTLETS AND OPTIONAL ENCLOSURES |
|
CSA B125.3 : 2018
|
PLUMBING FITTINGS |
|
CSA B64.0 : 2011
|
DEFINITIONS, GENERAL REQUIREMENTS, AND TEST METHODS FOR VACUUM BREAKERS AND BACKFLOW PREVENTERS |
|
CSA B481 SERIES : 2012
|
GREASE INTERCEPTORS |
|
(INACTIVE RECORD) API 53 RUSSIAN : 1997
|
RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
|
ASME A112.18.6 : 2009 : R2014
|
FLEXIBLE WATER CONNECTORS |
|
CSA Z10524-1: 2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
|
ASME B16.1 : 2015
|
Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
|
CSA Z10524-1 : 2012 : R2017
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
|
ASME B31.8 : 2016
|
Gas Transmission and Distribution Piping Systems |
|
API 602 RUSSIAN : 2009
|
STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
|
MSS SP 51 : 2012
|
CLASS 150LW CORROSION RESISTANT FLANGES AND CAST FLANGED FITTINGS |
|
DIN EN 14893 E : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
ASME B16.42 : 2016
|
DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
|
DIN EN 15714-4 E : 2010
|
INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
CSA Z10524-3 : 2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
|
CSA Z10524-2 : 2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
|
ANSI Z21.69 : 2015
|
CONNECTORS FOR MOVEABLE GAS APPLIANCES |
|
ASTM F 2509 : 2015-12
|
SPECIFICATION FOR FIELD-ASSEMBLED ANODELESS RISER KITS FOR USE ON OUTSIDE DIAMETER CONTROLLED POLYETHYLENE GAS DISTRIBUTION PIPE AND TUBING |
|
11/30124825 DC : 0
|
BS 7993 - TWIN FERRULE CONNECTORS AND ASSOCIATED TUBING FOR 316 STAINLESS STEEL SYSTEMS - SPECIFICATION AND TEST METHODS |
|
ASME B16.14 : 2013
|
FERROUS PIPE PLUGS, BUSHINGS, AND LOCKNUTS WITH PIPE THREADS |
|
ASME A112.14.1 : 2003
|
BACKWATER VALVES |
|
CSA Z10524-1:2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
|
10/30231432 DC : 0
|
BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS |
|
CSA B79 : 2008:R2013
|
COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS |
|
95/702085 DC : DRAFT FEB 1995
|
ISO/DIS 10434 - PETROLEUM AND NATURAL GAS INDUSTRIES - BOLTED BONNET STEEL GATE VALVES FOR REFINERY AND RELATED APPLICATIONS - BASIC REQUIREMENTS |
|
API 623 : 2013
|
STEEL GLOBE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
|
09/30202316 DC : 0
|
BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
|
MIL HDBK 288 : B
|
REVIEW AND ACCEPTANCE OF ENGINEERING DRAWING PACKAGES |
|
API 676 : 2009 : R2015
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
|
NBR 15055 : 2004 ERRATA 2010
|
BRONZE GATE, GLOBE, ANGLE AND CHECK VALVES |
|
MSS SP 80 : 2013
|
BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES |
|
API 687 : 2001 : R2009
|
ROTOR REPAIR |
|
ASME A112.1037 : 2015
|
PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES |
|
UNE EN 14893 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
ANSI/AWWA C115/A21.15 : 2011
|
FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
|
CSA Z10524-3:2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
|
DIN EN 15714-3 E : 2010
|
INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
(INACTIVE RECORD) API 676 : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
|
MIL DTL 29210/2 : 0
|
HOSE ASSEMBLY, IRON, BRASS, AND CRES CONNECTORS, RUBBER, METAL LINED, WIRE REINFORCED, 1.250, 1.500, AND 2.000 INCH HOSE, 250 PSIG, SATURATED STEAM SERVICE |
|
ANSI Z21.18 : 2007 : INC : ADD A : 2010 : R2012
|
GAS APPLIANCE PRESSURE REGULATORS |
|
CSA B125.2 : 2015
|
PLUMBING WASTE FITTINGS |
|
BS 1600(1991) : 1991
|
SPECIFICATION FOR DIMENSIONS OF STEEL PIPE FOR THE PETROLEUM INDUSTRY |
|
07/30166912 DC : DRAFT AUG 2007
|
BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
A A 60001 : A
|
TRAPS, STEAM |
|
ASME B16.24 : 2016
|
CAST COPPER ALLOY PIPE FLANGES, FLANGED FITTINGS, AND VALVES: CLASSES 150, 300, 600, 900, 1500, AND 2500 |
|
FED STD H28/7 : A
|
SCREW-THREAD STANDARDS FOR FEDERAL SERVICES SECTION 7 PIPE THREADS, GENERAL PURPOSE |
|
BS EN 15714-4 : 2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
FED STD H28 : A
|
SCREW THREAD STANDARDS FOR FEDERAL SERVICES |
|
CSA B70 : 2012 : INC : UPD 1:2012
|
CAST IRON SOIL PIPE, FITTINGS, AND MEANS OF JOINING |
|
API STD 600 : 2015
|
STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
|
ASTM A 733 : 2016 : REDLINE
|
Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
|
NBR 5590 : 2015 ERRATA 2 2017
|
CARBON STEEL PIPES WITH OR WITHOUT LONGITUDINAL WELD, BLACK OR GALVANIZED - REQUIREMENTS |
|
NBR 11324 : 1990
|
SISTEMA DE LUBRIFICACAO POR NEVOA |
|
NBR 11321 : 1988
|
SISTEMA DE LUBRIFICACAO CENTRALIZADA DE LINHA DUPLA |
|
NFPA 14 : 2016
|
INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
|
MS 35759 : C
|
CUPS, GREASE, AUTOMATIC FEED |
|
UNI EN 13175 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
NASA SSTD 8070 0067 : 2004
|
HIGH PRESSURE INDUSTRIAL WATER PIPING 'AG' |
|
DIN EN 13547 E : 2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
CSA Z10524-2 : 2012:R2017
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
|
ASTM F 1985 : 1999
|
Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves |
|
API 6A REDLINE : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
CSA Z10524-3 : 2012 : INC : AMD 1 : 2017:R201700
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
|
CSA Z10524-3 : 2012 : R2017
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
|
ASME B1.20.2M : 2006 : R2011
|
PIPE THREADS, 60 DEGREES, GENERAL PURPOSE |
|
API Std 53 RUSSIAN:1997
|
RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
|
API 599 RUSSIAN : 2013
|
METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS |
|
ASME B16.4 : 2016
|
GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250 |
|
ASME PVHO 1 : 2016
|
SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
|
ASTM F 1794 : 1997
|
Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems |
|
BS EN ISO 27509 : 2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
|
DIN EN 15714-3 : 2010
|
INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
ASTM A 53 : 2006
|
SPECIFICATION FOR PIPE, STEEL, BLACK AND HOT-DIPPED, ZINC-COATED WELDED AND SEAMLESS |
|
ASME A112.3.1 : 2007(R2017)
|
STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
|
ASTM B 861 : 2014 : REDLINE
|
Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
|
ASSE 1037 : 2015
|
PERFORMANCE REQUIREMENTS FOR PRESSURIZED FLUSHING DEVICES FOR PLUMBING FIXTURES |
|
FM 3615 : 2018
|
EXPLOSIONPROOF ELECTRICAL EQUIPMENT GENERAL REQUIREMENTS |
|
IEEE C57.21 : 2008
|
REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA |
|
CSA Z10524-2: 2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
|
ASTM B 829 : 2004
|
SPECIFICATION FOR GENERAL REQUIREMENTS FOR NICKEL AND NICKEL ALLOYS SEAMLESS PIPE AND TUBE |
|
ASTM B 725 : 2005 : R2014
|
Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe |
|
AWWA C512 : 2015
|
AIR-RELEASE, AIR/VACUUM, AND COMBINATION AIR VALVES FOR WATER AND WASTEWATER SERVICE |
|
02/705734 DC : DRAFT MAY 2002
|
EN ISO 17292 - METAL BALL VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
|
CSA Z10524-3 : 2012:R2017
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
|
API 682 : 2014
|
PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
|
API std 602 : 2015
|
GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
|
(INACTIVE RECORD)API 687 : 2001
|
ROTOR REPAIR |
|
MIL A-A-59614/2A : 2015
|
COUPLING ASSEMBLY, HOSE (WATER AND WATER SUCTION), SHORT SHANK WITH PIN LUG SWIVEL, TYPE 1, STYLE 2 |
|
09/30205570 DC : 0
|
BS EN 13799 - LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS |
|
MSS SP 45 : 2003
|
BYPASS AND DRAIN CONNECTIONS |
|
11/30243885 DC : 0
|
BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
API 676 REDLINE : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
|
10/30218988 DC : 0
|
BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) TANK VALVES AND FITTINGS |
|
ASME A112.14.3 : 2000 : R2014
|
HYDROMECHANICAL GREASE INTERCEPTORS |
|
09/30205877 DC : 0
|
BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
|
BS EN ISO 17078-4 : 2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
|
CSA 6.8 : 2005
|
PILOT GAS FILTERS |
|
FM 2008 : 2018
|
QUICK RESPONSE STORAGE SPRINKLERS FOR FIRE PROTECTION |
|
95/717060 DC : DRAFT DEC 1995
|
ISO/DIS 12149 - BOLTED BONNET STEEL GLOBE VALVES FOR GENERAL PURPOSE APPLICATIONS |
|
(INACTIVE RECORD)API 5C7 : 1996
|
RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
|
ASTM A 865 : 2003
|
Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
|
CSA B79 : 2008 : R2013
|
COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS |
|
ASME A112.14.3 : 2000 : R2004
|
HYDROMECHANICAL GREASE INTERCEPTORS |
|
CSA/ANSI/IAS NGV 4.4:99/CSA 12.54:M99 (R2018)
|
BREAKAWAY DEVICES FOR NATURAL GAS DISPENSING HOSES AND SYSTEMS |
|
CSA Z10524-2:2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
|
AWWA C230 : 2016
|
STAINLESS-STEEL FULL-ENCIRCLEMENT REPAIR AND SERVICE CONNECTION CLAMPS FOR 2-IN. THROUGH 12-IN. (50-MM THROUGH 300-MM) PIPE |
|
DIN EN ISO 5171 E : 2010
|
GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
|
ANSI Z21.18 : 2007
|
GAS APPLIANCE PRESSURE REGULATORS |
|
CSA Z10524-1 : 2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
|
I.S. EN 15714-3:2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
API 607 REDLINE : 2010
|
FIRE TEST FOR QUARTER-TURN VALVES AND VALVES EQUIPPED WITH NONMETALLIC SEATS |
|
UNE EN 15714-3 : 2010
|
INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
ASME A112.4.1 : 2009 : R2014
|
WATER HEATER RELIEF VALVE DRAIN TUBES |
|
CSA Z10524-3: 2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
|
ASTM F 1795 : 2000
|
Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems |
|
CSA/ANSI LC 6:08 (R2018)
|
NATURAL GAS OPERATED DIAPHRAGM PUMPS |
|
ASME B16.15 : 2013
|
CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
|
08/30146353 DC : DRAFT MAR 2008
|
BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
|
ASME B16.47 : 2017
|
LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
|
MIL PRF 52747 : F
|
NOZZLE ASSEMBLY, CLOSED-CIRCUIT REFUELING, STANDARD AND ARCTIC SERVICE |
|
CSA C900.2 : 2013
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
|
CSA B125.1 : 2012
|
PLUMBING SUPPLY FITTINGS |
|
CSA B109 : 2017
|
NATURAL GAS FOR VEHICLES INSTALLATION CODE |
|
MIL DTL 52618 : F
|
FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, GENERAL SPECIFICATION FOR |
|
API 19G2 : 2010
|
FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
|
API 602 REDLINE : 2009
|
STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
|
IEEE 1673 : 2016
|
REQUIREMENTS FOR CONDUIT AND CABLE SEALS FOR FIELD CONNECTED WIRING TO EQUIPMENT IN PETROLEUM AND CHEMICAL INDUSTRY EXPOSED TO PRESSURES ABOVE ATMOSPHERIC (1.5 KPA, 0.22 PSI) |
|
14/30300117 DC : 0
|
BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
MIL PRF 25962 : F
|
VALVE, LIQUID OXYGEN DRAIN |
|
MIL PRF 53015 : B
|
DISPLACEMENT AND EVACUATION KIT, COLLAPSIBLE HOSELINE |
|
NBR 10785 : 1989
|
COMPONENTES DO SISTEMA DE LUBRIFICACAO POR PULVERIZACAO - COMPONENTES |
|
ASTM A 865/A865M : 2006 : R2012
|
Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
|
ASTM F 1985 : 1999 : R2005
|
Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves |
|
PIP PCSPS001 : 2015
|
PACKAGED EQUIPMENT INSTRUMENTATION SPECIFICATION |
|
BS 5157(1989) : 1989
|
SPECIFICATION FOR STEEL GATE (PARALLEL SLIDE) VALVES |
|
CSA B79 : 2008
|
COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS |
|
ASTM F 1793 : 1997 : R2016 : EDT 1
|
Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service |
|
ASME B16.26 : 2013
|
CAST COPPER ALLOY FITTINGS FOR FLARED COPPER TUBES |
|
BS 1560-3.1(1989) : 1989
|
CIRCULAR FLANGES FOR PIPES, VALVES & FITTINGS (CLASS DESIGNATED) - STEEL, CAST IRON AND COPPER ALLOY FLANGES - SPECIFICATION FOR STEEL FLANGES |
|
13/30248693 DC : 0
|
BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
BS ISO 13577-3 : 2016
|
INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 3: GENERATION AND USE OF PROTECTIVE AND REACTIVE ATMOSPHERE GASES |
|
ASME B16.50 : 2013
|
WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
|
ASTM A 943/A943M : 2001
|
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes |
|
04/30116684 DC : DRAFT JUL 2004
|
EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LPG METALLIC PRESSURE DRUMS WITH A CAPACITY BETWEEN (150 AND 1 000 LITRES) |
|
UNE-EN 13175:2015
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
14/30299749 DC : 0
|
BS EN ISO 17292 - METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
|
API 676 CHINESE : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
|
API 664 : 2014
|
SPIRAL PLATE HEAT EXCHANGERS |
|
ASTM F 2387 : 2004
|
Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs |
|
BS EN ISO 12211 : 2012
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SPIRAL PLATE HEAT EXCHANGERS (ISO 12211:2012) |
|
UNI EN 15714-4 : 2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
17/30334513 DC : 0
|
BS EN ISO 20848-3 - PACKAGING - PLASTICS DRUMS - PART 3: PLUG BUNG CLOSURE SYSTEMS FOR PLASTICS DRUMS WITH A NOMINAL CAPACITY OF 113,6 L TO 220 L |
|
ANSI Z21.5.2 : 2016
|
GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
|
CSA HGV 4.4 : 2013(R2018)
|
STANDARD FOR BREAKAWAY DEVICES FOR COMPRESSED HYDROGEN DISPENSING HOSES AND SYSTEMS |
|
BS ISO 7121 : 2016
|
STEEL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
|
ASME A112.3.1 : 2007 : R2017
|
STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
|
ASME A112.18.8 : 2009
|
IN-LINE SANITARY WASTE VALVES FOR PLUMBING DRAINAGE SYSTEMS |
|
ASME B16.12 : 2009 : R2014
|
CAST IRON THREADED DRAINAGE FITTINGS |
|
BS EN 16129 : 2013
|
PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
|
ASME B16.23 : 2016
|
CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS: DWV |
|
API 608 CHINESE : 2012
|
METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
|
ASTM F 1182 : 2007 : R2013
|
Standard Specification for Anodes, Sacrificial Zinc Alloy |
|
BIS IS/IEC 60079-1 : 2007
|
EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
|
CSA 6.9 : 2014
|
QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
|
DIN 11869 : 2016
|
FLOW SIGHT GLASS |
|
15/30299570 DC : 0
|
BS ISO 7195 - NUCLEAR ENERGY - PACKAGINGS FOR THE TRANSPORT OF URANIUM HEXAFLUORIDE (UF[6]) |
|
(INACTIVE RECORD)ASTM A 135/A135M : 2009
|
SPECIFICATION FOR ELECTRIC-RESISTANCE-WELDED STEEL PIPE |
|
BS 6755-2(1987) : 1987
|
TESTING OF VALVES - SPECIFICATION FOR FIRE TYPE-TESTING REQUIREMENTS |
|
API 620 : 2013 : INC : ADD 1 : 2014
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
|
ASME A112.3.1 : 2007 : R2012
|
STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
|
04/30111935 DC : DRAFT APR 2004
|
ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS |
|
PIP PNSM0115 : 2016
|
PURCHASING REQUIREMENTS FOR PIPE |
|
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
|
ASME A112.19.5
|
FLUSH VALVES AND SPUDS FOR WATER CLOSETS, URINALS, AND TANKS |
|
98/717199 DC : DRAFT NOV 1998
|
PREN 13397: INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS |
|
ASME B31.12 : 2014
|
HYDROGEN PIPING AND PIPELINES |
|
ANSI/AWWA C710 : 2015
|
COLD-WATER METERS - DISPLACEMENT TYPE, PLASTIC MAIN CASE |
|
AWWA C700 : 2015
|
COLD-WATER METERS - DISPLACEMENT TYPE, METAL ALLOY MAIN CASE |
|
IEEE DRAFT C57.12.40 : D4 2006
|
SECONDARY NETWORK TRANSFORMERS, SUBWAY AND VAULT TYPES (LIQUID IMMERSED) |
|
BS 5353(1989) : 1989
|
SPECIFICATION FOR STEEL PLUG VALVES |
|
PIP PNSM0117 : 2008
|
PURCHASING REQUIREMENTS FOR FLANGES |
|
ANSI Z21.1 : 2016
|
HOUSEHOLD COOKING GAS APPLIANCES |
|
FM 1637 : 2010
|
FLEXIBLE SPRINKLER HOSE WITH THREADED END FITTINGS |
|
API 616 : 2011
|
GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
PREN 14129 : DRAFT 2011
|
LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS |
|
API 608 RUSSIAN : 2012
|
METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
|
API 677 : 2006 : R2016
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
MSS SP 133 : 2010
|
EXCESS FLOW VALVES FOR LOW PRESSURE FUEL GAS APPLIANCES |
|
CSA C22.2 No. 45.2 : 2008
|
ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL |
|
ASME A112.4.1 : 2009
|
WATER HEATER RELIEF VALVE DRAIN TUBES |
|
CSA C22.2 No. 45.1 : 2007 : INC: UPD 2 : 2014 : R201200
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
API 608 : 2012
|
METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
|
MSS SP 126 : 2013
|
IN-LINE, SPRING-ASSISTED, CENTER-GUIDED CHECK VALVES (CARBON, ALLOY STEEL, STAINLESS STEEL, & NICKEL ALLOYS) |
|
EI 1529 : 2015
|
AVIATION FUELLING HOSE AND HOSE ASSEMBLIES |
|
(INACTIVE RECORD)API 681 : 1996
|
LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
API 674 REDLINE : 2010
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
08/30180264 DC : DRAFT JUNE 2008
|
BS EN 13942 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
|
(INACTIVE RECORD) API 11V1 : 1995
|
SPECIFICATION FOR GAS LIFT EQUIPMENT |
|
I.S. EN ISO 12212:2012
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - HAIRPIN-TYPE HEAT EXCHANGERS (ISO 12212:2012) |
|
BS EN 13547 : 2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
12/30266928 DC : 0
|
BS EN 14071 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
|
MSS SP 131 : 2017
|
METALLIC MANUALLY OPERATED GAS DISTRIBUTION VALVES |
|
PIP PNSM0116 : 2013
|
PURCHASING REQUIREMENTS FOR FITTINGS AND FLANGES |
|
IEEE DRAFT 1277 : D11 99
|
DRAFT TRIAL USE GENERAL REQUIREMENTS AND TEST CODE FOR DRY-TYPE AND OIL-IMMERSED SMOOTHING REACTORS FOR DC POWER TRANSMISSION |
|
ASTM A 731/A731M : 1991
|
SPECIFICATION FOR SEAMLESS AND WELDED FERRITIC STAINLESS STEEL PIPE |
|
ASME B16.29 : 2017
|
Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV |
|
ASTM F 1794 : 1997 : R2010
|
Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems |
|
15/30322555 DC : 0
|
BS ISO 7121 - STEEL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
|
CSA C22.2 No. 45.1 : 2007
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
CSA B70 : 2012 : R2016
|
CAST IRON SOIL PIPE, FITTINGS, AND MEANS OF JOINING |
|
ASTM A 790/A790M : 2018 : REDLINE
|
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
|
CSA Z10524-1 : 2012:R2017
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES |
|
FM 1035 : 2014
|
NITROGEN GENERATORS |
|
I.S. EN ISO 23553-1:2014
|
SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
|
API 608 REDLINE : 2008
|
METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
|
PREN 13709 : DRAFT 2009
|
INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
|
PREN 1984 : DRAFT 2009
|
INDUSTRIAL VALVES - STEEL GATE VALVES |
|
BS EN ISO 12212 : 2012
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - HAIRPIN-TYPE HEAT EXCHANGERS (ISO 12212:2012) |
|
BS EN 15714-3 : 2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
MIL DTL 23554 : E
|
WASHER-EXTRACTOR, LAUNDRY, 16- TO 20-POUND CAPACITY (SUBMARINE SERVICE) |
|
API 603 : 2013
|
CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
|
ASME B1.20.2M : 2006
|
PIPE THREADS, 60 DEGREES, GENERAL PURPOSE |
|
FM 1421 : 2007
|
MONITOR ASSEMBLY |
|
11/30248684 DC : 0
|
BS EN 14129 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG TANKS |
|
CSA 6.32 : 2012
|
PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
|
ASTM A 1053/A1053M : 2012
|
Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe |
|
GOST R 52350.1 : 2005
|
ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D" |
|
ASTM A 949/A949M : 2001 : R2014
|
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
|
MS 35758 : D
|
CUPS, GREASE, MANUAL FEED |
|
MIL DTL 18182 : F
|
UNION, PIPE, FORGED STEEL, THREADED, WATER-OIL-GAS (2,000, 3,000, AND 6,000 LB/IN[2]) |
|
ASME Y14.6 : 2001
|
SCREW THREAD REPRESENTATION |
|
BS EN 16767 : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
BS 3016(1989) : 1989
|
SPECIFICATION FOR PRESSURE REGULATORS FOR LIQUEFIED PETROLEUM GASES |
|
NF EN ISO 16812 : 2008
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SHELL-AND-TUBE HEAT EXCHANGERS |
|
A-A-59614B:2015
|
COUPLING ASSEMBLY, HOSE (GARDEN, WATER, AND WATER SUCTION) |
|
I.S. EN 15714-4:2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
API 611 REDLINE : 2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
ASME A112.18.8 : 2009 : R2014
|
IN-LINE SANITARY WASTE VALVES FOR PLUMBING DRAINAGE SYSTEMS |
|
00/716563 DC : DRAFT NOV 2000
|
EN 1759-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 1: STEEL FLANGES, NPS 1/2 TO 24 |
|
NACE 1C187 : 2005
|
USE OF GALVANIC PROBE CORROSION MONITORS IN OIL AND GAS DRILLING AND PRODUCTION OPERATIONS |
|
ASME B16.39 : 2014
|
MALLEABLE IRON THREADED PIPE UNIONS: CLASSES 150, 250, AND 300 |
|
ASTM A 943/A943M : 2001 : R2019
|
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes |
|
FM 1043 : 2011
|
WATER FLOW DETECTOR TESTERS 1 INCH THROUGH 8 INCH NOMINAL SIZE |
|
NFPA 15 : 2017
|
WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
|
AWWA M41 : 3
|
DUCTILE-IRON PIPE AND FITTINGS |
|
DIN 8912 : 1990
|
COUPLING NUTS AND SCREWED PLUGS FOR USE WITH PN 40 FLARED FLANGE SOLDERLESS COMPRESSION COUPLINGS IN REFRIGERATING SYSTEMS |
|
ASME A112.4.1 : 2009
|
WATER HEATER RELIEF VALVE DRAIN TUBES |
|
ASTM F 1498 : 2008
|
Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings |
|
00/707848 DC : DRAFT APR 2000
|
EN ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
|
CSA B140.0 : 2003
|
OIL-BURNING EQUIPMENT: GENERAL REQUIREMENTS |
|
API 53 RUSSIAN : 1997 : R2004
|
RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
|
CSA B64 SERIES: 2011
|
BACKFLOW PREVENTERS AND VACUUM BREAKERS |
|
NF EN 15714-3 : 2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
MSS SP 71 : 2011
|
GRAY IRON SWING CHECK VALVES, FLANGED AND THREADED ENDS |
|
NBR 15083 : 2004
|
GLOBE AND ANGLE VALVES, FLANGED AND THREADED ENDS |
|
NBR 11720 : 2010
|
FITTINGS FOR JOINTING COPPER TUBES BY CAPILLARY WELDING OR BRAZING - REQUIREMENTS |
|
96/706683 DC : MAY 96
|
ISO 13707 RECIPROCATING COMPRESSORS FOR THE PETROLEUM AND GAS INDUSTRIES |
|
BS 5160(1989) : 1989
|
SPECIFICATION FOR STEEL GLOBE VALVES, GLOBE STOP AND CHECK VALVES AND LIFT TYPE CHECK VALVES |
|
ASME B16.33 : 2012 : R2017
|
MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
|
ISO 7121 : 2016
|
STEEL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
|
CSA B70 : 2012
|
CAST IRON SOIL PIPE, FITTINGS, AND MEANS OF JOINING |
|
API 607 : 2016
|
FIRE TEST FOR QUARTER-TURN VALVES AND VALVES EQUIPPED WITH NONMETALLIC SEATS |
|
CSA 4.4 : 2015
|
RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
|
ASME A112.4.14 : 2017
|
MANUALLY OPERATED QUARTER-TURN SHUTOFF VALVES FOR USE IN PLUMBING SYSTEMS |
|
MIL F 52618/9 : A
|
FITTINGS, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND: GENERAL SPECIFICATION FOR |
|
10/30165662 DC : 0
|
BS ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS |
|
ASME B16.22 : 2013
|
WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
|
(INACTIVE RECORD)API 613 : 2003
|
SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
AWWA C800 : 2014
|
UNDERGROUND SERVICE LINE VALVES AND FITTINGS |
|
BS 5154(1991) : 1991
|
SPECIFICATION FOR COPPER ALLOY GLOBE, GLOBE STOP AND CHECK, CHECK AND GATE VALVES |
|
API 663 : 2014
|
HAIRPIN-TYPE HEAT EXCHANGERS |
|
FM 2000 : 2018
|
AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
|
API 6DSS REDLINE : 2009
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
|
BS 7993(2011) : 2011
|
TWIN FERRULE CONNECTORS AND ASSOCIATED TUBING FOR 316 STAINLESS STEEL SYSTEMS - SPECIFICATION AND TEST METHODS |
|
CGA 6.8 : M95 ADDENDA B 2000
|
GAS FILTERS ON APPLIANCES |
|
DIN EN 16767 : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
ANSI Z21.80 : 2011
|
LINE PRESSURE REGULATORS |
|
CSA B125 : 2001
|
PLUMBING FITTINGS |
|
09/30171555 DC : DRAFT SEP 2009
|
BS EN ISO 10437 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
|
I.S. EN ISO 16812:2007
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SHELL-AND-TUBE HEAT EXCHANGERS |
|
BS 5351(1986) : 1986
|
SPECIFICATION FOR STEEL BALL VALVES FOR THE PETROLEUM PETROCHEMICAL AND ALLIED INDUSTRIES |
|
ASTM F 1974:2009
|
Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
|
MSS SP 104 : 2012
|
WROUGHT COPPER SOLDER-JOINT PRESSURE FITTINGS |
|
ASTM F 2389 : 2017-01
|
SPECIFICATION FOR PRESSURE-RATED POLYPROPYLENE (PP) PIPING SYSTEMS |
|
UNE EN 15714-4 : 2010
|
INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
FM 1344 : 2010
|
AIR RELEASE VALVES 1/2 INCH THROUGH 1 INCH NOMINAL SIZE |
|
09/30205883 DC : 0
|
BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
|
NBR 12712 : 1993 AMD 2002
|
DESIGN OF TRANSMISSION AND DISTRIBUTION PIPING SYSTEMS FOR FUEL GAS - PROCEDURE |
|
CSA B613 : 2000 : INC : UPD 2 : 2002 : R2012
|
PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
|
ANSI Z21.18 : 2007 : R2012
|
GAS APPLIANCE PRESSURE REGULATORS |
|
MIL P 10388 : H
|
PIPE FITTING, ONE OR MORE ENDS GROOVED |
|
02/711048 DC : DRAFT SEP 2002
|
EN ISO 10434 - BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
|
09/30205880 DC : DRAFT OCT 2009
|
BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
FM 6082 : 1988
|
SAFETY BUNGS |
|
CSA 6.32 : 2012 : INC : ADD A : 2013
|
PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
|
DIN EN 16767 E : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
FM 5580 : 2012
|
HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
|
MSS SP 123 : 2013
|
NON-FERROUS THREADED AND SOLDER-JOINT UNIONS FOR USE WITH COPPER WATER TUBE |
|
DIN 3387-1 E : 2008
|
SEPARABLE UNTHREADED PIPE CONNECTIONS FOR METAL GAS PIPES - PART 1: CONNECTIONS FOR PIPES WITH SMOOTH ENDS |
|
CSA 8.5 : 2012
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
CSA Z10524 : 2002
|
PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES FOR MEDICAL GAS SYSTEMS |
|
CSA B613 : 2000 : INC : UPD 2 : 2002:R2012
|
PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
|
BS 5150(1990) : 1990
|
SPECIFICATION FOR CAST IRON GATE VALVES |
|
CSA Z15002 : 2012 : R2017
|
FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
|
CSA 12.8 : 2002
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
|
12/30262118 DC : 0
|
BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
|
ASTM B 687 : 1999
|
Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples |
|
API 674 : 2010 : INC : ERR 1 : 2015 : R2016
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
CSA C22.2 No. 60079.1 : 2016
|
EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
|
DIN CEN/TS 13547 : 2007
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
10/30227442 DC : 0
|
BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
|
API 661 : 2015
|
PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
|
API 574 : 2016
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
|
ASTM A 943/A943M : 2001
|
SPECIFICATION FOR SPRAY-FORMED SEAMLESS AUSTENITIC STAINLESS STEEL PIPES |
|
UNE EN 16767 : 2017
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
CSA B45 SERIES : 2002:R2013
|
PLUMBING FIXTURES |
|
BS ISO 23551-5 : 2014
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PART 5: MANUAL GAS VALVES |
|
ASTM F 1807 : 2017-02
|
SPECIFICATION FOR METAL INSERT FITTINGS UTILIZING A COPPER CRIMP RING FOR SDR9 CROSS-LINKED POLYETHYLENE (PEX) TUBING AND SDR9 POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) TUBING |
|
FM 1631 : 2006
|
ADJUSTABLE AND FIXED SPRINKLER FITTINGS 1/2 INCH THROUGH 1 INCH NOMINAL SIZE |
|
MIL F 52618 : D
|
FITTING, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND, GENERAL SPECIFICATION FOR |
|
07/30150187 DC : DRAFT AUG 2007
|
BS ISO 17078-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING, PULLING, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
|
API 599 : 2013
|
METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
|
CSA 8.4 : 2014
|
GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
|
ANSI Z21.21 : 2015
|
AUTOMATIC VALVES FOR GAS APPLIANCES |
|
10/30196259 DC : 0
|
BS EN ISO 12212 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - HAIRPIN-TYPE HEAT EXCHANGERS |
|
MIL PRF 370 : K
|
HOSE AND HOSE ASSEMBLIES, NONMETALLIC: ELASTOMERIC, LIQUID FUEL |
|
10/30214867 DC : 0
|
BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
|
IEEE C57.12.44 : 2014
|
REQUIREMENTS FOR SECONDARY NETWORK PROTECTORS |
|
04/30123544 DC : DRAFT OCT 2004
|
IEC 60079-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES 'D' |
|
BS 5158(1989) : 1989
|
SPECIFICATION FOR CAST IRON PLUG VALVES |
|
UNE EN 16129 : 2014
|
PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
|
02/207221 DC : DRAFT JULY 2002
|
IEC 60079-1 ED.5 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D" |
|
ASTM A 943/A943M : 2001 : R2009
|
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes |
|
17/30345890 DC : 0
|
BS ISO 23550 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - GENERAL REQUIREMENTS |
|
BS 4504-3.2(1989) : 1989
|
CIRCULAR FLANGES FOR PIPES, VALVES & FITTINGS (PN DESIGNATED) - STEEL, CAST IRON & COPPER ALLOY FLANGES - SPECIFICATION FOR CAST IRON FLANGES |
|
BS 143&1256(1986) : 1986
|
SPECIFICATION FOR MALLEABLE CAST IRON AND CAST COPPER ALLOY THREADED PIPE FITTINGS |
|
(INACTIVE RECORD)ASTM F 1793 : 1997
|
SPECIFICATION FOR AUTOMATIC SHUT-OFF VALVES (ALSO KNOWN AS EXCESS FLOW VALVES, EFV) FOR AIR OR NITROGEN SERVICE |
|
ASME A112.19.17 : 2010(R2018)
|
MANUFACTURED SAFETY VACUUM RELEASE SYSTEMS (SVRS) FOR RESIDENTIAL & COMMERCIAL SWIMMING POOL, SPA, HOT TUB, AND WADING POOL SUCTION SYSTEMS |
|
ASME B16.44 : 2012(R2017)
|
MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
|
BS ISO 23551-10 : 2016
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 10: VENT VALVES |
|
PIP VESAC001 : 2016
|
AIR-COOLED HEAT EXCHANGER SPECIFICATION (SUPPLEMENT TO API STD 661, 7TH EDITION) |
|
PIP PNSC0011 : 2015
|
INSTALLATION OF ASME B31.3 METALLIC PIPING |
|
MIL PRF 13789 : E
|
STRAINERS, SEDIMENT: PIPELINE, BASKET TYPE |
|
ASME Y14.6 : 2001
|
SCREW THREAD REPRESENTATION |
|
07/30168326 DC : DRAFT DEC 2007
|
BS ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
|
BS EN ISO 10439-1 : 2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS |
|
BS 1560-3.2(1989) : 1989
|
CIRCULAR FLANGES FOR PIPES, VALVES AND FITTINGS (CLASS DESIGNATED) - STEEL, CAST IRON AND COPPER ALLOY FLANGES - SPECIFICATION FOR CAST IRON FLANGES |
|
BS ISO 3977-3 : 2004
|
GAS TURBINES - PROCUREMENT - PART 3: DESIGN REQUIREMENTS |
|
ASTM F 1791 : 2000
|
Standard Specification for Filters Used in Air or Nitrogen Systems |
|
ASTM F 2434 : 2014-09
|
SPECIFICATION FOR METAL INSERT FITTINGS UTILIZING A COPPER CRIMP RING FOR SDR9 CROSS-LINKED POLYETHYLENE (PEX) TUBING AND SDR9 CROSS-LINKED POLYETHYLENE/ALUMINUM/CROSS-LINKED POLYETHYLENE (PEX-AL-PEX) TUBING |
|
14/30301577 DC : 0
|
BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
ASTM D 7718 : 2011
|
Standard Practice for Obtaining In-Service Samples of Lubricating Grease |
|
API 681 : 1996 : R2010
|
LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
17/30324747 DC : 0
|
BS ISO 19037 - SHIPS AND MARINE TECHNOLOGY - GATE VALVES FOR USE IN LOW TEMPERATURE APPLICATIONS - DESIGN AND TESTING REQUIREMENTS |
|
11/30247086 DC : 0
|
BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D" |
|
ASME B16.44 : 2012
|
MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
|
A A 50559 : 0
|
VALVES, TEMPERATURE-REGULATING (THERMOSTATICALLY CONTROLLED) |
|
CSA B355S1 : 2002
|
SUPPLEMENT 1 TO CSA B355 - LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
|
NBR 15117 : 2004
|
CAST IRON GATE VALVES FLANGED AND THREADED ENDS |
|
CGA 6.21 : 1997 : INC : ADD B : 2010 : R2016
|
GAS APPLIANCE SEDIMENT TRAPS |
|
ISA RP42.00.01 : 2001
|
NOMENCLATURE FOR INSTRUMENT TUBE FITTINGS |
|
ASTM A 949/A949M : 2001 : R2005
|
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
|
CSA B356 : 2000:R2010
|
WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
|
API 64 RUSSIAN : 2001
|
RECOMMENDED PRACTICE FOR DIVERTER SYSTEMS EQUIPMENT AND OPERATIONS |
|
API 11PGT : 1992
|
RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES |
|
UNE EN ISO 5171 : 2011
|
GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
|
API 677 :2006
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
CSA B70 :2012
|
CAST IRON SOIL PIPE, FITTINGS, AND MEANS OF JOINING |
|
CSA Z245.15 : 2017
|
STEEL VALVES |
|
MIL PRF 83178 : C
|
REGULATOR, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE-BREATHING, CRU-73A, GENERAL SPECIFICATION FOR |
|
MIL PRF 53051 : C
|
PUMPING ASSEMBLIES, WHEEL-MOUNTED, DIESEL ENGINE DRIVEN, BULK TRANSFER, FUEL AND POTABLE WATER PUMPING SERVICE |
|
API 600 CHINESE : 2015
|
STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
|
CSA 6.3 : 2007
|
GAS APPLIANCES PRESSURE REGULATORS |
|
ASTM A 943/A943M : 2001 : R2014
|
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes |
|
ASME B94.9 : 2008 : R2013
|
TAPS: GROUND THREAD WITH CUT THREAD APPENDIX (INCH AND METRIC SIZES) |
|
CSA Z15002 : 2012
|
FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
|
CSA Z10524-4 : 2012:R2017
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
|
ASTM F 1974 : 2009 : R2015
|
Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
|
CSA 6.32 : 2012 : INC : ADD A : 2012 : R2016
|
PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
|
CSA C22.2 No. 45.2 : 2008 : INC : UPD 1 : 2014 : R201300
|
ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL |
|
ASME A112.6.4 : 2003 : R2012
|
ROOF, DECK, AND BALCONY DRAINS |
|
SAE J 514 : 2012
|
HYDRAULIC TUBE FITTINGS |
|
ASME B94.9 : 2008 : INC : ERR 1 : 2010
|
TAPS: GROUND THREAD WITH CUT THREAD APPENDIX (INCH AND METRIC SIZES) |
|
ASME B16.33 : 2012(R2017)
|
MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
|
03/118014 DC : DRAFT DEC 2003
|
ISO 7121 - METAL BALL VALVES FOR GENERAL-PURPOSE INDUSTRIAL APPLICATIONS |
|
CSA 6.8 : 2005
|
PILOT GAS FILTERS |
|
ASME B16.33 : 2012
|
MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2) |
|
ASME A112.19.5 : 2011 : R2016
|
FLUSH VALVES AND SPUDS FOR WATER CLOSETS, URINALS, AND TANKS |
|
CSA B45 SERIES : 2002 : R2013
|
PLUMBING FIXTURES |
|
CSA B64 SERIES:2011
|
BACKFLOW PREVENTERS AND VACUUM BREAKERS |
|
ANSI LC 4 : 2012
|
PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
|
UNE EN 13547 : 2014
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
MIL PRF 25961 : H
|
VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-50/A |
|
CSA Z10524-4 : 2012 : R2017
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
|
ASME B1.20.2M : 2006
|
PIPE THREADS, 60 DEGREES, GENERAL PURPOSE |
|
CSA B356 : 2000 : R2005
|
WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
|
ANSI Z21.79 : 1997 : INC : ADD B : 2010 : R2012
|
GAS APPLIANCES SEDIMENT TRAPS |
|
CSA 6.18 : 2002 : R2013
|
SERVICE REGULATORS FOR NATURAL GAS |
|
FM 2311 : 2008
|
VACUUM AND PRESSURE GAUGES FOR FIRE PROTECTION SYSTEMS |
|
ASME B16.3 : 2016
|
MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300 |
|
ANSI Z21.79 : 1997 : INC : ADD B : 2010 : R2017
|
GAS APPLIANCES SEDIMENT TRAPS |
|
CSA B125.1 : 2012
|
PLUMBING SUPPLY FITTINGS |
|
CSA Z10524-4 : 2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
|
CSA Z245.1 : 2014
|
STEEL PIPE |
|
CSA B356 : 2000 : R2010
|
WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
|
A A 59553 : A
|
COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE |
|
05/30135705 DC : DRAFT JUL 2005
|
ISO 16812 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SHELL-AND-TUBE HEAT EXCHANGERS |
|
ASTM A 949/A949M : 2001
|
SPECIFICATION FOR SPRAY-FORMED SEAMLESS FERRITIC/AUSTENITIC STAINLESS STEEL PIPE |
|
CSA B64 SERIES : 2011 : INC : UPD 2:2015
|
BACKFLOW PREVENTERS AND VACUUM BREAKERS |
|
ASME B16.12 : 2009:R2014
|
CAST IRON THREADED DRAINAGE FITTINGS |
|
ANSI Z21.71 : 1993
|
AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
|
MIL PRF 83772 : C
|
HOSE, ASSEMBLY, CRYOGENIC LIQUID, AIRCRAFT SERVICING |
|
A A 59617 : 0
|
UNIONS, BRASS OR BRONZE, THREADED PIPE CONNECTIONS AND SOLDER-JOINT TUBE CONNECTIONS |
|
02/705659 DC : DRAFT APR 2002
|
ISO/DIS 21049 - PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
|
CSA B45 SERIES:2002
|
PLUMBING FIXTURES |
|
MSS SP 129 : 2014
|
COPPER-NICKEL SOCKET-WELDING, FITTINGS, AND UNIONS |
|
AWWA E103 : 2015
|
HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS |
|
API 674 : 2010(R2016)
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
ASME B16.52 : 2018
|
FORGED NONFERROUS FITTINGS, SOCKET-WELDING AND THREADED (TITANIUM, TITANIUM ALLOYS, ALUMINIUM, AND ALUMINIUM ALLOYS |
|
ASME A112.14.1 : 2003 : R2008
|
BACKWATER VALVES |
|
08/30179182 DC : DRAFT MAY 2008
|
BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
|
CSA Z15002 :2012
|
FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
|
ASME A112.14.1 : 2003 : R2017
|
BACKWATER VALVES |
|
MSS SP 45 : 2003 : R2008
|
BYPASS AND DRAIN CONNECTIONS |
|
API 611 : 2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
API 611 : 2008 : R2014
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
A A 59616 : A
|
PIPE FITTINGS: BUSHINGS, LOCKNUTS, AND PLUGS; IRON, STEEL, AND ALUMINUM; (THREADED); 125 - 150 POUNDS |
|
ASTM F 3226/F3226M : 2016
|
Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
|
ANSI Z21.79 : 1997 : R2012
|
GAS APPLIANCES SEDIMENT TRAPS |
|
CSA 6.8 : 2005 : INC : ADD A : 2010 : R2015
|
PILOT GAS FILTERS |
|
ASME A112.6.4 : 2003
|
ROOF, DECK, AND BALCONY DRAINS |
|
ISO 5171 : 2009
|
GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
|
ANSI C57.12.40 : 2011
|
AMERICAN NATIONAL STANDARD FOR SECONDARY NETWORK TRANSFORMERS - SUBWAY AND VAULT TYPES (LIQUID IMMERSED) - REQUIREMENTS |
|
CSA B45 SERIES : 2002
|
PLUMBING FIXTURES |
|
CSA 6.18 : 2002 : R2017
|
SERVICE REGULATORS FOR NATURAL GAS |
|
MIL U 18182 : E
|
UNION, PIPE, FORGED STEEL, THREADED, WATER OIL GAS (2,000, 3,000 AND 6,000 LB/IN2) |
|
ANSI Z21-101 : 2012
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
NEMA SM 24 : 1991(R2002)
|
LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW |
|
04/30117386 DC : DRAFT JUL 2004
|
EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
|
ASME A112.14.1 : 2003 : R2012
|
BACKWATER VALVES |
|
ASTM B 775/B775M : 2016-06
|
SPECIFICATION FOR GENERAL REQUIREMENTS FOR NICKEL AND NICKEL ALLOY WELDED PIPE |
|
ANSI Z21.79 : 1997 : INC : ADD A : 2005 : R2012
|
GAS APPLIANCES SEDIMENT TRAPS |
|
API 5C7:1996
|
RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
|
ANSI NGV4.8 : 2012 : R2013
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
|
BS 6130-2(1994) : 1994
|
HOSE AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION FOR RUBBER HOSE AND HOSE ASSEMBLIES |
|
CSA B140.0 : 2003 : R2013
|
OIL-BURNING EQUIPMENT: GENERAL REQUIREMENTS |
|
CSA 8.5 : 2012 : R2017
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2016
|
AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
|
MSS SP 83 : 2014
|
CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS) |
|
DD CEN/TS 13547 : 2006
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
API 677 : 2006 : R2010
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
CSA B481 SERIES : 2012
|
GREASE INTERCEPTORS |
|
API 600 REDLINE : 2009
|
STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
|
API 6A CHINESE : 2011
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
CSA B64 SERIES : 2011 : INC : UPD 1:2015
|
BACKFLOW PREVENTERS AND VACUUM BREAKERS |
|
MSS SP 105 : 2016
|
INSTRUMENT VALVES FOR CODE APPLICATIONS |
|
ASTM F 1793 : 1997 : R2010
|
Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service |
|
ASTM A 813/A813M : 2014-11
|
SPECIFICATION FOR SINGLE- OR DOUBLE-WELDED AUSTENITIC STAINLESS STEEL PIPE |
|
ASTM B 829 : 2004 : REV A : R2009
|
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
CSA B64 SERIES : 2011 : R2016
|
BACKFLOW PREVENTERS AND VACUUM BREAKERS |
|
API 11V1 :1995
|
SPECIFICATION FOR GAS LIFT EQUIPMENT |
|
ANSI Z21.80 : 2011
|
LINE PRESSURE REGULATORS |
|
CSA 6.3 : 2007 : INC : ADD B : 2012 : R2016
|
GAS APPLIANCES PRESSURE REGULATORS |
|
ASME A112.18.1 : 2012
|
PLUMBING SUPPLY FITTINGS |
|
ANSI NGV4.8 : 2012 : R2016
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
|
CSA Z305.3 : 0
|
PRESSURE REGULATORS, GAUGES AND FLOW-METERING DEVICES FOR MEDICAL GASES |
|
ASME A112.18.6 : 2009
|
FLEXIBLE WATER CONNECTORS |
|
ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2012
|
AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
|
CSA 12.8 : 2002 : R2016
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
|
ASME B16.38 : 2012
|
LARGE METALLIC VALVES FOR GAS DISTRIBUTION - MANUALLY OPERATED, NPS 2[1/2] (DN 65) TO NPS 12 (DN 300), 125 PSIG (8.6 BAR) MAXIMUM |
|
AWWA C907 : 2017
|
INJECTION-MOLDED POLYVINYL CHLORIDE (PVC) PRESSURE FITTINGS, 4 IN. THROUGH 12 IN. (100 MM THROUGH 300 MM), FOR WATER, WASTEWATER, AND RECLAIMED WATER SERVICE |
|
CSA Z10524-4:2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
|
ANSI NGV4.4 : 1999 : R2014
|
BREAKAWAY DEVICES FOR NATURAL GAS DISPENSING HOSES AND SYSTEMS |
|
ASME A112.18.8 : 2009
|
IN-LINE SANITARY WASTE VALVES FOR PLUMBING DRAINAGE SYSTEMS |
|
API 617 : 2014
|
AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
|
CSA B64 SERIES : 2011
|
BACKFLOW PREVENTERS AND VACUUM BREAKERS |
|
CSA Z15002 : 2012:R2017
|
FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
|
ASTM F 1794 : 1997 : R2004
|
Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems |
|
CSA 6.3 : 2007 : INC : ADD A: 2010
|
GAS APPLIANCES PRESSURE REGULATORS |
|
BS 6121-1(2005) : 2005
|
MECHANICAL CABLE GLANDS - PART 1: ARMOUR GLANDS - REQUIREMENTS AND TEST METHODS |
|
ASME B16.44 : 2012 : R2017
|
MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI |
|
MSS SP 107 : 1991
|
TRANSITION UNION FITTINGS FOR JOINING METAL AND PLASTIC PRODUCTS |
|
ASME B16.38 : 2012 : R2017
|
LARGE METALLIC VALVES FOR GAS DISTRIBUTION - MANUALLY OPERATED, NPS 2[1/2] (DN 65) TO NPS 12 (DN 300), 125 PSIG (8.6 BAR) MAXIMUM |
|
CSA B64 SERIES : 2011 : INC : UPD 1 : 2015
|
BACKFLOW PREVENTERS AND VACUUM BREAKERS |
|
IEC 60079-1 REDLINE : 7ED 2014
|
EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
|
ASTM A 1053/A1053M : 2012 : R2017
|
Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe |
|
CSA B45.15 : 2017
|
FLUSH VALVES AND SPUDS FOR WATER CLOSETS, URINALS, AND TANKS |
|
CSA 6.18 : 2002
|
SERVICE REGULATORS FOR NATURAL GAS |
|
CGA 6.21 : 1997 : INC : ADD A : 2005
|
GAS APPLIANCE SEDIMENT TRAPS |
|
ANSI Z21-101 : 2012 : R2017
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
API 19G4 : 2011
|
PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
|
ASSE 1070-2020/ASME A112.1070-2020/CSA B125.70 : 2015
|
PERFORMANCE REQUIREMENTS FOR WATER TEMPERATURE LIMITING DEVICES |
|
CSA 12.8 : 2002
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
|
CSA B64 SERIES : 2011:R2016
|
BACKFLOW PREVENTERS AND VACUUM BREAKERS |
|
MSS SP 99 : 2016
|
INSTRUMENT VALVES |
|
ASME B16.51 : 2013
|
Copper and Copper Alloy Press-Connect Pressure Fittings |
|
ANSI Z21-101 : 2012
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
CSA B137 COMPENDIUM : 2017
|
THERMOPLASTIC PRESSURE PIPING COMPENDIUM |
|
CGA 6.21 : 1997 : R2012
|
GAS APPLIANCE SEDIMENT TRAPS |
|
ASTM A 312/A312M : 2017-03
|
SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
|
ASME A112.18.1 : 2012
|
PLUMBING SUPPLY FITTINGS |
|
WW C 633 : D
|
COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE |
|
API 673 : 2014
|
CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
CSA B64 SERIES : 2011 : INC : UPD 2 : 2015
|
BACKFLOW PREVENTERS AND VACUUM BREAKERS |
|
DIN 3387-1 : 2008
|
SEPARABLE UNTHREADED PIPE CONNECTIONS FOR METAL GAS PIPES - PART 1: CONNECTIONS FOR PIPES WITH SMOOTH ENDS |
|
ANSI Z21.80 : 2011 : INC : ADD A : 2012 : R2016
|
LINE PRESSURE REGULATORS |
|
CSA B355 : 2015
|
LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
|
CSA 6.10 : 2015
|
CONNECTORS FOR GAS APPLIANCES |
|
ANSI Z21.5.2-2016/CSA 7.2:2016
|
GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
|
DIN 8906:1990
|
PN 40 FLARED FLANGE SOLDERLESS COMPRESSION COUPLINGS FOR USE IN REFRIGERATING SYSTEMS |
|
ANSI LC 4 : 2012 : INC : ADD A : 2013 : R2017
|
PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
|
CSA 6.16 : 2015
|
CONNECTORS FOR MOVEABLE GAS APPLIANCES |
|
ANSI Z21.80 : 2011 : INC : ADD A : 2012
|
LINE PRESSURE REGULATORS |
|
ASTM F 1973 : 2013 : EDT 1
|
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
|
MSS SP 106 : 2012
|
CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
|
DIN 3866:1990-06
|
REFRIGERATION - THREADED STEM - 90 DEGREES FLARED FLANGES FOR SOLDERLESS COMPRESSION COUPLINGS RATED FOR PN 40 |
|
FM 2021,25 : 2010
|
AUTOMATIC AND OPEN WATER-SPRAY NOZZLES FOR INSTALLATION IN PERMANENTLY PIPED SYSTEMS |
|
ANSI/AWWA C702 : 2015
|
COLD-WATER METERS - COMPOUND TYPE |
|
CSA B613 : 2000 : R2005
|
PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
|
CSA 12.8 : 2002 : R2013
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
|
API 6A : 2010
|
SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
|
CSA C22.2 No. 45.1 : 2007 : R2017
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
ANSI NGV4.8 : 2012
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
|
CSA B481 SERIES : 2012 : R2017
|
GREASE INTERCEPTORS |
|
CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010 : R2012
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
CSA 6.3 : 2007 : INC : ADD A : 2010 : R2012
|
GAS APPLIANCES PRESSURE REGULATORS |
|
MSS SP 45:2003
|
BYPASS AND DRAIN CONNECTIONS |
|
ASME A112.18.1 : 2012 : R2017
|
PLUMBING SUPPLY FITTINGS |
|
API 619 : 2010
|
ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
|
CSA B356 : 2000
|
WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
|
CSA 6.3 : 2007 : INC : ADD B : 2012
|
GAS APPLIANCES PRESSURE REGULATORS |
|
CSA B356 : 2000
|
WATER PRESSURE REDUCING VALVES FOR DOMESTIC WATER SUPPLY SYSTEMS |
|
ANSI NGV4.4 : 1999
|
BREAKAWAY DEVICES FOR NATURAL GAS DISPENSING HOSES AND SYSTEMS |
|
PIP VESHP001 : 2017
|
HAIRPIN HEAT EXCHANGER SPECIFICATION |
|
CSA B140.0 : 2003
|
OIL-BURNING EQUIPMENT: GENERAL REQUIREMENTS |
|
API 600 RUSSIAN : 2009
|
STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
|
ASME B94.9 : 2008
|
TAPS: GROUND THREAD WITH CUT THREAD APPENDIX (INCH AND METRIC SIZES) |
|
ANSI LC 4 : 2012 : INC : ADD A : 2013
|
PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
|
DIN EN ISO 20848-3 : 2008
|
PACKAGING - PLASTICS DRUMS - PART 3: PLUG/BUNG CLOSURE SYSTEMS FOR PLASTICS DRUMS WITH A NOMINAL CAPACITY OF 113,6 L TO 220 L |
|
CSA C22.2 No. 45.1 : 2007(R2017)
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
DIN 8919 : DRAFT 93
|
REFRIGERATION; REFRIGERANT CONTROL AND FILLING VALVES FOR CONNECTION TO REFRIGERATION FLARE TYPE FITTINGS MWP 40 |
|
CSA C22.2 No. 45.1 : 2007 : INC : UPD 1: 2010 : R2012
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
DIN EN 15714-4 : 2010
|
INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
CSA B613 : 2000
|
PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
|
ASTM F 1793 : 1997 : R2004
|
Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service |
|
CSA C22.2 No. 45.1 : 2007 : INC : UPD 2 : 2014 : R201200
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
ANSI LC 7 : 2009
|
PIPE JOINT SEALING COMPOUNDS AND MATERIALS |
|
CSA 6.3 : 2007 : INC : ADD A : 2010
|
GAS APPLIANCES PRESSURE REGULATORS |
|
MSS SP 78 : 2011
|
GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS |
|
ASME B16.36 : 2015
|
ORIFICE FLANGES |
|
PIP RESP003H : 2013
|
SPECIFICATION FOR HIGH POWER HORIZONTAL CENTRIFUGAL PUMPS FOR WATER SERVICE |
|
ASTM B 829 : 2004 : REV A : R2009 : EDT 1
|
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM A 53 : 2006
|
SPECIFICATION FOR PIPE, STEEL, BLACK AND HOT-DIPPED, ZINC-COATED WELDED AND SEAMLESS |
|
ANSI Z83.20 : 2016/CSA 2.34 : 2016
|
GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS |
|
MSS SP 136 : 2014
|
DUCTILE IRON SWING CHECK VALVES |
|
NBR 15056 : 2004
|
BOLTED BONNET STEEL GATE VALVES FOR PETROLEUM AND NATURAL GAS INDUSTRIES |
|
ASME A112.19.5 :
|
FLUSH VALVES AND SPUDS FOR WATER CLOSETS, URINALS, AND TANKS |
|
ISO 13577-3 : 2016
|
INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 3: GENERATION AND USE OF PROTECTIVE AND REACTIVE ATMOSPHERE GASES |
|
MSS SP 85 : 2011
|
GRAY IRON GLOBE & ANGLE VALVES, FLANGED AND THREADED ENDS |
|
CSA C22.2 No. 45.2 : 2008 : R2013
|
ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL |
|
CSA C22.2 No. 45.2:2008
|
ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL |
|
ASME A112.6.4 : 2003
|
ROOF, DECK, AND BALCONY DRAINS |
|
FM 1056 : 2010
|
SIGHT DRAINS FOR AUTOMATIC SPRINKLER SYSTEMS |
|
CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
ASME A112.18.6 : 2009
|
FLEXIBLE WATER CONNECTORS |
|
UNI EN 15714-3 : 2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
CSA C22.2 No. 45.1 : 2007 : FR
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
CSA Z10524-4: 2012
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
|
CSA C22.2 No. 45.1 : 2007
|
ELECTRICAL RIGID METAL CONDUIT - STEEL |
|
ASME B31.3:2016
|
PROCESS PIPING |
|
ASME B40.200 : 2008
|
THERMOMETERS, DIRECT READING AND REMOTE READING |
|
API 616 REDLINE : 2011
|
GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
ANEP/MNEP-85 : 2014
|
MATERIAL INTEROPERABILITY REQUIREMENTS FOR SUBMARINE ESCAPE AND RESCUE |
|
CSA B70:2012
|
CAST IRON SOIL PIPE, FITTINGS, AND MEANS OF JOINING |
|
CSA 6.3 : 2007
|
GAS APPLIANCES PRESSURE REGULATORS |
|
ASME B40.200 : 2008 : R2013
|
THERMOMETERS, DIRECT READING AND REMOTE READING |
|
ASTM F 3226/F3226M : 2016
|
SPECIFICATION FOR METALLIC PRESS-CONNECT FITTINGS FOR PIPING AND TUBING SYSTEMS |
|
ANSI Z21.79 : 1997
|
GAS APPLIANCES SEDIMENT TRAPS |
|
IEEE DRAFT C57.12.36 : D10 2006
|
REQUIREMENTS FOR LIQUID-IMMERSED DISTRIBUTION SUBSTATION TRANSFORMERS |
|
I.S. EN 13175:2014
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
API 687 : 2001 : R2015
|
ROTOR REPAIR |
|
API 574 CHINESE : 2009
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
|
FM 1364 : 2013
|
EXPANSION CHAMBERS |
|
API 681 : 1996
|
LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
CSA B79 : 2008(R2018)
|
COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS |
|
CSA B79 : 2008
|
COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS |
|
CSA HGV 4.5 : 2013
|
STANDARD FOR PRIORITY AND SEQUENCING EQUIPMENT FOR HYDROGEN VEHICLE FUELING |
|
API 682 CHINESE : 2014
|
PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
|
API STD 676 : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
|
API 546 : 2008
|
BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
|
API 6DSS CHINESE : 2009
|
SPECIFICATION FOR SUBSEA PIPELINE VALVES |
|
NEMA SM 23 : 1991(R2002)
|
STEAM TURBINES FOR MECHANICAL DRIVE SERVICE |
|
API 11V1 : 1995 : R2008
|
SPECIFICATION FOR GAS LIFT EQUIPMENT |
|
API 610 : 2010
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
|
API 620 CHINESE : 2013
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
|
API 674 : 2010 : ERR 2 : 2015
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
API 687 : 2001
|
ROTOR REPAIR |
|
API 610 REDLINE : 2010
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
|
ANSI NGV4.4 : 1999
|
BREAKAWAY DEVICES FOR NATURAL GAS DISPENSING HOSES AND SYSTEMS |
|
ISO 20848-3 : 2006
|
PACKAGING - PLASTICS DRUMS - PART 3: PLUG/BUNG CLOSURE SYSTEMS FOR PLASTICS DRUMS WITH A NOMINAL CAPACITY OF 113,6 L TO 220 L |
|
(INACTIVE RECORD) API 677 : 2006
|
GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
API STD 541 : 2014
|
FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
|
ASME B31.4 : 2016
|
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
|
NFPA 1925 : 2018
|
MARINE FIRE-FIGHTING VESSELS |
|
(INACTIVE RECORD)API 611:2008
|
GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
|
ISO 23551-1 : 2012
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
|
API 613:2003
|
SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
API 619 REDLINE : 2010
|
ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
|
CSA/ANSI/IAS NGV 4.4:99/CSA 12.54:M99 (R2018)
|
BREAKAWAY DEVICES FOR NATURAL GAS DISPENSING HOSES AND SYSTEMS |
|
PIP PCSIP001 : 2015
|
INSTRUMENT TUBING MATERIAL SPECIFICATION |
|
MSS SP 118 : 2007
|
COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE) |
|
API 674 : 2010
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
ASME Y14.6 : 2001 : R2007
|
SCREW THREAD REPRESENTATION |
|
API 674 : 2010 : ERR 1 : 2014
|
POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
|
ASME B16.11 : 2016
|
FORGED FITTINGS, SOCKET-WELDING AND THREADED |
|
FM 1112 : 2006
|
INDICATING VALVES (BUTTERFLY OR BALL TYPE) |
|
API 660 : 2015
|
SHELL-AND-TUBE HEAT EXCHANGERS |
|
BS EN ISO 20848-3 : 2008
|
PACKAGING - PLASTICS DRUMS - PART 3: PLUG/BUNG CLOSURE SYSTEMS FOR PLASTICS DRUMS WITH A NOMINAL CAPACITY OF 113,6 L TO 220 L |
|
PREN 19 : DRAFT 2014
|
INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
|
I.S. EN 60079-1:2014
|
EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
|
CSA HGV 4.8 : 2012(R2018)
|
HYDROGEN GAS VEHICLE FUELING STATION COMPRESSOR GUIDELINES |
|
IEEE 1277 : 2010
|
GENERAL REQUIREMENTS AND TEST CODE FOR DRY-TYPE AND OIL-IMMERSED SMOOTHING REACTORS FOR DC POWER TRANSMISSION |
|
ISO 16812 : 2007
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SHELL-AND-TUBE HEAT EXCHANGERS |
|
NBR 15280-1 : 2017
|
ONSHORE PIPELINE - PART 1: DESIGN |
|
API 53 : 2012
|
BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS |
|
NBR IEC 60079-1 : 2016
|
EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
|
UNI EN ISO 27509 : 2013
|
PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
|
IEEE C57.12.40 : 2011
|
NETWORK, THREE-PHASE TRANSFORMERS, 2500 KVA AND SMALLER; HIGH VOLTAGE, 34500 V AND BELOW; LOW VOLTAGE, 600 V AND BELOW; SUBWAY AND VAULT TYPES (LIQUID IMMERSED) |
|
AWWA C712 : 2015
|
COLD-WATER METERS - SINGLEJET TYPE |
|
UNI EN ISO 12212 : 2012
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - HAIRPIN-TYPE HEAT EXCHANGERS |
|
NBR 11322 : 1989
|
SISTEMA DE LUBRIFICACAO CENTRALIZADA PROGRESSIVA |
|
ANSI Z21.90 : 2015
|
GAS CONVENIENCE OUTLETS AND OPTIONAL ENCLOSURES |
|
ASTM A 1053/A1053M : 2012
|
SPECIFICATION FOR WELDED FERRITIC-MARTENSITIC STAINLESS STEEL PIPE |
|
I.S. EN ISO 27509:2012
|
PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012) |
|
AWWA C708 : 2015
|
COLD-WATER METERS - MULTIJET TYPE |
|
IEEE C57.17 : 2012
|
REQUIREMENTS FOR ARC FURNACE TRANSFORMERS |
|
MSS SP 95 : 2014
|
SWAGE(D) NIPPLES AND BULL PLUGS |
|
AWWA C713 : 2015
|
COLD-WATER METERS - FLUIDIC-OSCILLATOR TYPE |
|
AWWA C704 : 2015
|
PROPELLER-TYPE METERS FOR WATERWORKS APPLICATIONS |
|
AWWA C701 : 2015
|
COLD-WATER METERS - TURBINE TYPE, FOR CUSTOMER SERVICE |
|
I.S. EN 14071:2015
|
LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
|
ANSI/AWWA C514 : 2015
|
AIR VALVE AND VENT INFLOW PREVENTER ASSEMBLIES FOR POTABLE WATER DISTRIBUTION SYSTEM AND STORAGE FACILITIES |
|
CSA 8.5 : 2012
|
GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
|
AWWA C703 : 2015
|
COLD-WATER METERS - FIRE-SERVICE TYPE |
|
ISO 23551-8 : 2016
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 8: MULTIFUNCTIONAL CONTROLS |
|
I.S. EN 16767:2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
|
NBR 6925 : 2016
|
MALLEABLE CAST IRON FITTINGS CLASS 150 AND 300 EQUIPPED WITH NPT THREAD FOR PIPING |
|
I.S. EN 13547:2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
FM 1041 : 2006
|
ALARM CHECK VALVES |
|
ASME B31.3 SPANISH : 2010
|
PROCESS PIPING |
|
I.S. EN ISO 20848-3:2008
|
PACKAGING - PLASTICS DRUMS - PART 3: PLUG/BUNG CLOSURE SYSTEMS FOR PLASTICS DRUMS WITH A NOMINAL CAPACITY OF 113,6 L TO 220 L |
|
CSA 6.18 : 2002
|
SERVICE REGULATORS FOR NATURAL GAS |
|
I.S. EN ISO 5171:2010
|
GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
|
NBR 5587 : 1985
|
TUBOS DE ACO PARA CONDUCAO, COM ROSCA ANSI/ASME B1.20.1 - DIMENSOES BASICAS - PADRONIZACAO |
|
I.S. EN ISO 10439-1:2015
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015) |
|
I.S. EN ISO 12211:2012
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SPIRAL PLATE HEAT EXCHANGERS (ISO 12211:2012) |
|
NEMA 250 : 2014
|
ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM) |
|
FM 2030 : 2009
|
RESIDENTIAL AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
|
BS EN 13175 : 2014
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
NSF 359 : 2011
|
VALVES FOR CROSSLINKED POLYETHYLENE (PEX) WATER DISTRIBUTION TUBING SYSTEMS |
|
CSA B70 : 2012 : INC : UPD 1 : 2012
|
CAST IRON SOIL PIPE, FITTINGS, AND MEANS OF JOINING |
|
ISO 16003 : 2008(R2017)
|
COMPONENTS FOR FIRE-EXTINGUISHING SYSTEMS USING GAS - REQUIREMENTS AND TEST METHODS - CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS; SELECTOR VALVES AND THEIR ACTUATORS; NOZZLES; FLEXIBLE AND RIGID CONNECTORS; AND CHECK VALVES AND NON-RETURN VALVES |
|
ASME PV CODE 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
|
ANSI Z21.54 : 2014
|
GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
|
NORSOK I 001 : REV 4
|
FIELD INSTRUMENTATION |
|
CSA B837:2014(R2019)
|
COLLAPSIBLE FABRIC STORAGE TANKS (BLADDERS) |
|
UNI 9167 : 2009
|
INITIAL PRESSURE AND REDUCTION PLANTS FOR NATURAL GAS - DESIGN, CONSTRUCTION AND TESTING |
|
I.S. EN ISO 17078-4:2010
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
|
ISO 3977-3 : 2004(R2018)
|
GAS TURBINES - PROCUREMENT - PART 3: DESIGN REQUIREMENTS |
|
ASTM A 949/A949M : 2001 : R2009
|
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
|
MSS SP 145 : 2013
|
METAL BALL VALVES FOR LOW PRESSURE/LOW TEMPERATURE PLUMBING APPLICATIONS |
|
ASTM F 1865 : 2010-01
|
SPECIFICATION FOR MECHANICAL COLD EXPANSION INSERT FITTING WITH COMPRESSION SLEEVE FOR CROSS-LINKED POLYETHYLENE (PEX) TUBING |
|
BS 1435-1(1987) : 1987
|
RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES |
|
ASME B16.34 : 2017
|
VALVES - FLANGED, THREADED, AND WELDING END |
|
MSS SP 97 : 2012
|
INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS |
|
CSA C22.2 No. 139 : 2013 : R2018
|
ELECTRICALLY OPERATED VALVES |
|
MSS SP 114 : 2007
|
CORROSION RESISTANT PIPE FITTINGS THREADED AND SOCKET WELDING CLASS 150 AND 1000 |
|
ASTM F 1973 : 2013 : R2018
|
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
|
PIP PCCIP001 : 2015
|
INSTRUMENT PIPING AND TUBING SYSTEMS CRITERIA |
|
ASME Y14.6 : 2001 : R2013
|
SCREW THREAD REPRESENTATION |
|
API 620 REDLINE : 2008
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
|
CSA 6.22 : 2011
|
LINE PRESSURE REGULATORS |
|
CSA 6.22 : 2011 : ADD 1 : INC : ADD A : 2012
|
LINE PRESSURE REGULATORS |
|
ASME B31.1 : 2016
|
POWER PIPING |
|
ASTM A 795/A795M : 2013 : REDLINE
|
Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
|
CSA 2.22 : 2016
|
VENTED DECORATIVE GAS APPLIANCES |
|
CSA 6.22 : 2011 : INC : ADD A : 2012 : R2016
|
LINE PRESSURE REGULATORS |
|
DIN 30690-1 : 2016
|
CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
|
ANSI/AWWA C714 : 2013
|
COLD-WATER METERS FOR RESIDENTIAL FIRE SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
|
CSA Z662 : 2015
|
OIL AND GAS PIPELINE SYSTEMS |
|
ASTM F 1793 : 1997
|
Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service |
|
NF EN ISO 5171 : 2010
|
GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
|
SAE J 176 : 2014
|
FAST FILL FUELING INSTALLATION FOR OFF-ROAD SELF-PROPELLED WORK MACHINES |
|
SAE J 1231 : 2016
|
FORMED TUBE ENDS FOR HOSE CONNECTIONS AND HOSE FITTINGS |
|
ASME PV CODE 8 DIV 2 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
|
ASTM A 949/A949M : 2001
|
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
|
BS ISO 23551-8 : 2016 : INC : AMD1 : 2019
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 8: MULTIFUNCTIONAL CONTROLS |
|
BS ISO 23551-8 : 2016
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 8: MULTIFUNCTIONAL CONTROLS |
|
ASTM F 1380 : 1995 : REV A
|
Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
|
UNE EN 14071 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
|
EN 14071 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
|
ASTM F 1794 : 1997 : R2016 : EDT 1
|
Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems |
|
MSS SP 128 : 2012
|
DUCTILE IRON GATE VALVES |
|
ASTM F 3226/F3226M : 2016 : EDT 1
|
Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems |
|
PIP RESE001 : 2017
|
GENERAL PURPOSE SKID-MOUNTED PACKAGED EQUIPMENT SPECIFICATION |
|
ASME A112.14.1 : 2003
|
BACKWATER VALVES |
|
ASME B16.12 : 2009
|
CAST IRON THREADED DRAINAGE FITTINGS |
|
UNI EN ISO 5171 : 2010
|
GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
|
CSA 6.5 : 2015
|
AUTOMATIC VALVES FOR GAS APPLIANCES |
|
DIN EN ISO 20848-3 E : 2008
|
PACKAGING - PLASTICS DRUMS - PART 3: PLUG/BUNG CLOSURE SYSTEMS FOR PLASTICS DRUMS WITH A NOMINAL CAPACITY OF 113,6 L TO 220 L |
|
EN ISO 16812 : 2007
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SHELL-AND-TUBE HEAT EXCHANGERS |
|
DIN EN 13175 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
XP CEN/TS 13547 : 2007 XP
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
ASTM F 1960 : 2015-05
|
SPECIFICATION FOR COLD EXPANSION FITTINGS WITH PEX REINFORCING RINGS FOR USE WITH CROSS-LINKED POLYETHYLENE (PEX) TUBING |
|
DIN EN 14071 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
|
ANSI Z21.24 : 2015
|
CONNECTORS FOR GAS APPLIANCES |
|
DIN EN 14071 E : 2015
|
LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
|
EN ISO 20848-3 : 2008
|
PACKAGING - PLASTICS DRUMS - PART 3: PLUG/BUNG CLOSURE SYSTEMS FOR PLASTICS DRUMS WITH A NOMINAL CAPACITY OF 113,6 L TO 220 L |
|
MSS SP 116 : 2014
|
SERVICE-LINE VALVES AND FITTINGS FOR DRINKING WATER SYSTEMS |
|
ASTM B 829 : 2004 : REV A : R2017
|
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
BS EN ISO 16812 : 2007
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SHELL-AND-TUBE HEAT EXCHANGERS |
|
API 6D : 2015 : INC : ERR 1 : 2015
|
SPECIFICATION FOR PIPELINE AND PIPING VALVES |
|
ISO 23551-10 : 2016
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 10: VENT VALVES |
|
ASME B16.18 : 2012
|
Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)
|
|
ANSI Z21.18 : 2007 : INC : ADD A : 2010
|
GAS APPLIANCE PRESSURE REGULATORS |
|
UNI EN ISO 12211 : 2012
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SPIRAL PLATE HEAT EXCHANGERS |
|
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
|
ANSI Z21.18 : 2007
|
GAS APPLIANCE PRESSURE REGULATORS |
|
CSA C22.2 No. 0.5 : 2016
|
THREADED CONDUIT ENTRIES |
|
ANSI Z21.18 : 2007 : INC : ADD B : 2012 : R2017
|
GAS APPLIANCE PRESSURE REGULATORS |
|
ASTM A 135/A135M : 2009 : R2014
|
Standard Specification for Electric-Resistance-Welded Steel Pipe |
|
ASTM F 1182 : 2007
|
Standard Specification for Anodes, Sacrificial Zinc Alloy |
|
MSS SP 70 : 2011
|
GRAY IRON GATE VALVES, FLANGED AND THREADED ENDS |
|
ASME B94.9 : 2008
|
TAPS: GROUND THREAD WITH CUT THREAD APPENDIX (INCH AND METRIC SIZES) |
|
ASTM F 2080 : 2016-09
|
SPECIFICATION FOR COLD-EXPANSION FITTINGS WITH METAL COMPRESSION-SLEEVES FOR CROSSLINKED POLYETHYLENE (PEX) PIPE AND SDR9 POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) PIPE |
|
ASTM F 2159 : 2014-09
|
SPECIFICATION FOR PLASTIC INSERT FITTINGS UTILIZING A COPPER CRIMP RING FOR SDR9 CROSS-LINKED POLYETHYLENE (PEX) TUBING AND SDR9 POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) TUBING |
|
UL 6A : 2
|
ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL |
|
ASTM F 1970 : 2012-12
|
SPECIFICATION FOR SPECIAL ENGINEERED FITTINGS, APPURTENANCES OR VALVES FOR USE IN POLY (VINYL CHLORIDE) (PVC) OR CHLORINATED POLY (VINYL CHLORIDE) (CPVC) SYSTEMS |
|
BS EN ISO 5171 : 2010
|
GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
|
ASTM F 1985 : 1999 : R2019 : EDT 1
|
Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves |
|
ANSI Z21.71 : 1993
|
AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
|
CSA C22.2 No. 18.2 : 2006 : R2011
|
NONMETALLIC OUTLET BOXES |
|
FM 1055 : 2016
|
WATER MOTOR GONGS |
|
ASTM F 2897 : 2015-07
|
SPECIFICATION FOR TRACKING AND TRACEABILITY ENCODING SYSTEM OF NATURAL GAS DISTRIBUTION COMPONENTS (PIPE, TUBING, FITTINGS, VALVES, AND APPURTENANCES) |
|
NBR 7609 : 1992
|
VAGAO FERROVIARIO - DISPOSITIVO DE SEGURANCA |
|
CSA C22.2 No. 139 : 2013
|
ELECTRICALLY OPERATED VALVES |
|
CSA C22.2 No. 18.2 : 2006 : INC : UPD 1 : 2013 : R201100
|
NONMETALLIC OUTLET BOXES |
|
CSA C22.2 No. 18.2 : 2006
|
NONMETALLIC OUTLET BOXES |
|
ASTM A 865/A865M : 2006
|
Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
|
IEEE C57.12.36 : 2007
|
REQUIREMENTS FOR LIQUID-IMMERSED DISTRIBUTION SUBSTATION TRANSFORMERS |
|
ASTM F 1961 : 2010-01
|
SPECIFICATION FOR METAL MECHANICAL COLD FLARE COMPRESSION FITTINGS WITH DISC SPRING FOR CROSSLINKED POLYETHYLENE (PEX) TUBING |
|
ASTM A 53 : 2006A
|
SPECIFICATION FOR PIPE, STEEL, BLACK AND HOT-DIPPED, ZINC-COATED WELDED AND SEAMLESS |
|
ASTM B 687 : 1999 : R2016
|
Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples |
|
ASTM F 2735 : 2009
|
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing |
|
NFE 29 374 : 2009
|
INDUSTRIAL VALVES - COPPER AND COPPER ALLOYS CHECK VALVES - SPECIFICATIONS |
|
ASTM F 1795 : 2000
|
SPECIFICATION FOR PRESSURE-REDUCING VALVES FOR AIR OR NITROGEN SYSTEMS |
|
ASTM B 725 : 2005 : R2014 : EDT 1
|
Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe |
|
ASME A112.1070 : 2015
|
PERFORMANCE REQUIREMENTS FOR WATER TEMPERATURE LIMITING DEVICES |
|
ASTM F 1498 : 2008 : R2012 : EDT 1
|
Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings |
|
MSS SP 65 : 2012
|
HIGH PRESSURE CHEMICAL INDUSTRY FLANGES AND THREADED STUBS FOR USE WITH LENS GASKETS |
|
ASTM F 409 : 2017 : REDLINE
|
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
|
CSA B125.14 : 2017
|
MANUALLY OPERATED VALVES FOR USE IN PLUMBING SYSTEMS |
|
NF EN 15714-4 : 2009
|
INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
|
CSA C22.2 No. 18 : 0
|
OUTLET BOXES, CONDUIT BOXES, FITTINGS AND ASSOCIATED HARDWARE |
|
CGA 6.21 : 1997
|
GAS APPLIANCE SEDIMENT TRAPS |
|
ANSI NGV4.8 : 2012
|
STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
|
PIP PNSM0110 : 2017
|
PURCHASING REQUIREMENTS FOR VALVES |
|
ASTM F 1973 : 2013
|
SPECIFICATION FOR FACTORY ASSEMBLED ANODELESS RISERS AND TRANSITION FITTINGS IN POLYETHYLENE (PE) AND POLYAMIDE 11 (PA11) AND POLYAMIDE 12 (PA12) FUEL GAS DISTRIBUTION SYSTEMS |
|
MSS SP 88 : 2015
|
DIAPHRAGM VALVES |
|
PREN 13799 : DRAFT 2009
|
LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LPG TANKS |
|
ASTM F 2387 : 2004 : R2012
|
Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs |
|
CSA C22.2 No. 18.2 : 2006
|
NONMETALLIC OUTLET BOXES |
|
PREN 14893 : DRAFT 2013
|
LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
|
ASTM A 1053/A1053M : 2012 : EDT 1
|
Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe |
|
ASTM F 2735 : 2009
|
SPECIFICATION FOR PLASTIC INSERT FITTINGS FOR SDR9 CROSS-LINKED POLYETHYLENE (PEX) AND POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) TUBING |
|
ASTM F 1985 : 1999 : R2011
|
Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves |
|
MSS SP 139 : 2014
|
COPPER ALLOY GATE, GLOBE, ANGLE, AND CHECK VALVES FOR LOW PRESSURE/LOW TEMPERATURE PLUMBING APPLICATIONS |
|
ASTM B 829 : 2004 : REV A
|
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM B 775 : 2015-12
|
SPECIFICATION FOR GENERAL REQUIREMENTS FOR NICKEL AND NICKEL ALLOY WELDED PIPE |
|
FM 3616 : 2011
|
DUST-IGNITIONPROOF ELECTRICAL EQUIPMENT - GENERAL REQUIREMENTS |
|
FM 1530 : 2016
|
FIRE DEPARTMENT CONNECTIONS |
|
ASTM A 949/A949M : 2001 : R2019
|
Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
|
ASTM F 1795 : 2000 : R2006
|
Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems |
|
UNI EN 13547 : 2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
ASTM B 725 : 2005
|
SPECIFICATION FOR WELDED NICKEL (UNS N02200/UNS N02201) AND NICKEL COPPER ALLOY (UNS N04400) PIPE |
|
ASTM B 725 : 2005 : R2009
|
Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe |
|
ASTM A 135/A135M : 2009
|
Standard Specification for Electric-Resistance-Welded Steel Pipe |
|
CSA B613 : 2000
|
PRIVATE RESIDENCE LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
|
ASTM F 1380 : 1995 : REV A : R2002
|
Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
|
ASTM A 943/A943M : 2001 : R2005
|
Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes |
|
ASTM F 1380 : 1995 : REV A : R2002 : EDT 1
|
Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008) |
|
CSA B1800 SERIES : 2015
|
THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM |
|
BS EN 14071 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
|
ASTM A 865/A865M :
|
SPECIFICATION FOR THREADED COUPLINGS, STEEL, BLACK OR ZINC-COATED (GALVANIZED) WELDED OR SEAMLESS, FOR USE IN STEEL PIPE JOINTS |
|
ASTM F 1791 : 2000
|
SPECIFICATION FOR FILTERS USED IN AIR OR NITROGEN SYSTEMS |
|
ASTM F 1791 : 2000 : R2013
|
Standard Specification for Filters Used in Air or Nitrogen Systems |
|
ISO 14313 : 2007R(2018)
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
|
DIN EN ISO 5171 : 2010
|
GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES |
|
ASTM F 1791 : 2000 : R2006
|
Standard Specification for Filters Used in Air or Nitrogen Systems |
|
ASTM F 2387 : 2004
|
SPECIFICATION FOR MANUFACTURED SAFETY VACUUM RELEASE SYSTEMS (SVRS) FOR SWIMMING POOLS, SPAS AND HOT TUBS |
|
API 614 : 2008
|
LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
|
ANSI LC 1 : 2018
|
FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING |
|
CSA 6.26 : 2018
|
FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING |
|
ASTM A 135 : 2005
|
Standard Specification for Electric-Resistance-Welded Steel Pipe |
|
IEEE C57.12.10 : 2010
|
STANDARD REQUIREMENTS FOR LIQUID-IMMERSED POWER TRANSFORMERS |
|
ASME B40.200 : 2008
|
THERMOMETERS, DIRECT READING AND REMOTE READING |
|
14/30301146 DC : 0
|
BS EN 19 - INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
|
ASME A18.1 : 2017
|
SAFETY STANDARD FOR PLATFORM LIFTS AND STAIRWAY CHAIRLIFTS |
|
11/30173941 DC : 0
|
BS EN ISO 27509 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING |
|
ANSI C57.12.10 : 2010
|
TRANSFORMERS - 230 KV AND BELOW 833/958 THROUGH 8333/10 417 KVA, SINGLE-PHASE, AND 750/862 THROUGH 60 000/80 000/100 000 KVA, THREE-PHASE WITHOUT LOAD TAP CHANGING; AND 3750/4687 THROUGH 60 000/80 000/100 000 KVA WITH LOAD TAP CHANGING - SAFETY REQUIREMENT |
|
BS 5154(1989) : AMD 6716
|
SPECIFICATION FOR COPPER ALLOY GLOBE, GLOBE STOP AND CHECK, CHECK AND GATE VALVES |
|
NBR 15978 : 2011
|
COPPER AND COPPER ALLOYS FITTINGS WITH PUSH-FIT ENDS FOR JOINT TUBE |
|
NBR 11325 : 1990
|
SISTEMA DE LUBRIFICACAO AR-OLEO |
|
NBR 5597 : 2013
|
CARBON STEEL CONDUITS AND FITTINGS WITH PROTECTIVE COATING AND NPT THREADS - REQUIREMENTS |
|
ASME A112.6.4 : 2003 : R2008
|
ROOF, DECK, AND BALCONY DRAINS |
|
BS 143&1256(2000) : 2000
|
THREADED PIPE FITTINGS IN MALLEABLE CAST IRON AND CAST COPPER ALLOY |
|
PREN 12288 : DRAFT 2009
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
ISO 23550 : 2011
|
SAFETY AND CONTROL DEVICES FOR GAS AND/OR OIL BURNERS AND APPLIANCES - GENERAL REQUIREMENTS |
|
ANSI Z21.22 : 2015
|
RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
|
CSA B70 : 2012 :R2016
|
CAST IRON SOIL PIPE, FITTINGS, AND MEANS OF JOINING |
|
ANSI Z21.18 : 2007 : INC : ADD B : 2012
|
GAS APPLIANCE PRESSURE REGULATORS |
|
FM 1230 : 2013
|
ANTI-WATER HAMMER CHECK VALVES |
|
ASME B73.2M : 91(R1999)
|
PUMPS - SPECIFICATION FOR VERTICAL IN-LINE CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS |
|
ANSI Z21.18 : 2007 : INC : ADD
|
GAS APPLIANCE PRESSURE REGULATORS |
|
ASTM F 1985 : 1999
|
SPECIFICATION FOR PNEUMATIC-OPERATED, GLOBE-STYLE, CONTROL VALVES |
|
CSA Z15002: 2012
|
FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
|
ASTM F 1795 : 2000 : R2013
|
Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems |
|
ASTM A 53/A53M : 2012-04
|
SPECIFICATION FOR PIPE, STEEL, BLACK AND HOT-DIPPED, ZINC-COATED, WELDED AND SEAMLESS |
|
DIN EN 13175 E : 2015
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
ASME A112.18.2 : 2015
|
PLUMBING WASTE FITTINGS |
|
API 650 CHINESE : 2013
|
WELDED TANKS FOR OIL STORAGE |
|
API 613 : 2003 : INC : ERR 1 : 2007 : R2010
|
SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
|
ASME A112.19.5 : 2011
|
FLUSH VALVES AND SPUDS FOR WATER CLOSETS, URINALS, AND TANKS |
|
API 574 REDLINE : 2009
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
|
ASTM F 1182:2007
|
SPECIFICATION FOR ANODES, SACRIFICIAL ZINC ALLOY |
|
CSA C22.2 No. 113 : 2015
|
FANS AND VENTILATORS |
|
ASME A112.3.1 : 2007
|
STAINLESS STEEL DRAINAGE SYSTEMS FOR SANITARY DWV, STORM, AND VACUUM APPLICATIONS, ABOVE- AND BELOW-GROUND |
|
CSA Z10524-3 : 2012 : INC : AMD 1 : 2017 : R201700
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
|
API 5C7 : 1996 : R2007
|
RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES |
|
ASME B16.38 : 2012
|
LARGE METALLIC VALVES FOR GAS DISTRIBUTION - MANUALLY OPERATED, NPS 2[1/2] (DN 65) TO NPS 12 (DN 300), 125 PSIG (8.6 BAR) MAXIMUM |
|
UNE-EN 60079-1:2015
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
|
|
FM 1034 : 2013
|
AIR DRYING UNITS |
|
FM 5551 : 1963
|
STRAINERS FOR USE WITH WATER BASED FIRE PROTECTION SYSTEMS |
|
PIP RESP003V : 2013
|
SPECIFICATION FOR HIGH POWER VERTICAL CENTRIFUGAL PUMPS FOR WATER SERVICE |
|
CSA Z10524-2 : 2012 : R2017
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
|
ASME A112.14.3 : 2000
|
HYDROMECHANICAL GREASE INTERCEPTORS |
|
API 650 : 2013
|
WELDED TANKS FOR OIL STORAGE |
|
API 614 REDLINE : 2008
|
LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
|
ISO 23551-5 : 2014
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 5: MANUAL GAS VALVES |
|
NFPA 58 HDBK : 2017
|
LP-GAS CODE HANDBOOK |
|
API 551 : 2016
|
PROCESS MEASUREMENT |
|
ASTM B 725 : 2005
|
Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe |
|
ASTM B 862 : 2014 : REDLINE
|
Standard Specification for Titanium and Titanium Alloy Welded Pipe |
|
ASTM B 687 : 1999 : R2011
|
Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples |
|
ASTM F 1498:2008
|
SPECIFICATION FOR TAPER PIPE THREADS 60 DEGREE FOR THERMOPLASTIC PIPE AND FITTINGS |
|
ASTM F 1973 : 2013
|
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems |
|
(INACTIVE RECORD)ASTM F 1794 : 1997
|
SPECIFICATION FOR HAND-OPERATED, GLOBE-STYLE VALVES FOR GAS (EXCEPT OXYGEN GAS) AND HYDRAULIC SYSTEMS |
|
ASTM B 829 : 2004
|
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube |
|
ASTM F 1974 : 2009
|
SPECIFICATION FOR METAL INSERT FITTINGS FOR POLYETHYLENE/ALUMINUM/POLYETHYLENE AND CROSSLINKED POLYETHYLENE/ALUMINUM/CROSSLINKED POLYETHYLENE COMPOSITE PRESSURE PIPE |
|
ASTM F 2735 : 2009 : R2016
|
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing |
|
ASTM B 687 : 1999 : R2005 : EDT 1
|
Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples |
|
ISO 13577-2 : 2014
|
INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
|
API 650 : 2013+ADD 3 : 2018
|
WELDED TANKS FOR OIL STORAGE |
|
NBR 15827 : 2014
|
INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST |
|
I.S. CEN TS 13547:2006
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
ISO 7195 : 2005(R2018)
|
NUCLEAR ENERGY - PACKAGING OF URANIUM HEXAFLUORIDE (UF[6]) FOR TRANSPORT |
|
ISO 10436 : 1993
|
PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL-PURPOSE STEAM TURBINES FOR REFINERY SERVICE |
|
EN 19 : 2016
|
INDUSTRIAL VALVES - MARKING OF METALLIC VALVES |
|
ANSI Z21.103 : 2017
|
UNVENTED PORTABLE TYPE GAS CAMP HEATERS FOR INDOOR AND OUTDOOR USE |