ASME B16.3 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
10-01-2024
English
31-07-2018
Describes malleable iron threaded fittings, Classes 150 and 300. It also contains provisions for using steel for caps and couplings in Class 150 for NPS [3/8] and smaller.
This Standard covers malleable iron threaded fittings,Classes 150 and 300. It also contains provisions for using steel for caps and couplings in Class 150 for NPS 3⁄8 and smaller. This Standard include (a) pressure–temperature ratings (b) size and method of designating openings of reducing fittings (c) marking (d) material (e) dimensions and tolerances (f) threading (g) coatings Mandatory Appendix I provides table values in U.S. Customary units.
DevelopmentNote |
Supersedes WW P 521 (07/2004)
|
DocumentType |
Standard
|
ISBN |
9780791871317
|
Pages |
54
|
PublisherName |
American Society of Mechanical Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ASTM F 1139 : 1988 : R2004 | Standard Specification for Steam Traps and Drains |
MIL-DTL-52618 Revision F:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, GENERAL SPECIFICATION FOR |
MS39232 Revision C:2015 | REDUCER, PIPE RIGHT HAND THREAD (150 AND 300 POUNDS) |
BS 5306-5.2:1984 | Code of practice for fire extinguishing installations and equipment on premises. Halon systems Halon 1211 total flooding systems |
CSA 6.18 : 2002 : R2013 | SERVICE REGULATORS FOR NATURAL GAS |
ASTM A 338 : 1984 : R2014 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
CGA 6.21 : 1997 | GAS APPLIANCE SEDIMENT TRAPS |
ASTM F 1139 : 1988 : R2010 | Standard Specification for Steam Traps and Drains |
CSA 6.20 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
ASTM F 1172 : 1988 : R2015 : EDT 1 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
MIL-DTL-52618-4 Revision E:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, TEES (REDUCING SIZES) |
BS 5306-5.1(1982) : 1982 | FIRE EXTINGUISHING INSTALLATIONS AND EQUIPMENT ON PREMISES - HALON SYSTEMS - HALON 1301 TOTAL FLOODING SYSTEMS |
MS39233 Revision D:2015 | COUPLING, PIPE STRAIGHT (150 & 300 POUNDS) |
ASTM F 1271 : 1990 : R1995 : EDT 1 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
MIL-DTL-52618-2 Revision E:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, REDUCERS AND CLOSE AND OPEN PATTERN RETURN BENDS (STRAIGHT SIZES) |
ASTM F 1201 : 1988 : R2010 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASME B31.1 : 2016 | POWER PIPING |
CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
ANSI NGV4.8 : 2012 : R2016 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
ASTM F 1201 : 1988 : R2016 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
MIL-DTL-52618-1 Revision E:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, 90-DEGREE ELBOWS, TEES, CROSSES, 45-DEGREE ELBOWS AND COUPLINGS (STRAIGHT SIZES) |
ASTM A 338 : 1984 : R1998 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
MIL-DTL-52618-3 Revision E:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, 90-DEGREE ELBOWS (REDUCING SIZES) |
ASTM F 1006 : 1986 : R2004 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ASTM F 1200 : 1988 : R1998 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 1271 : 1990 : R2001 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
ASTM F 1271 : 1990 : R2006 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
CGA 6.21 : 1997 : INC : ADD A : 2005 | GAS APPLIANCE SEDIMENT TRAPS |
ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2012 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
ASTM F 1199 : 1988 : R2004 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
MIL-DTL-52618-5 Revision E:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, 90-DEGREE AND 45-DEGREE STREET ELBOWS |
ANSI Z21.18 : 2007 | GAS APPLIANCE PRESSURE REGULATORS |
ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
ASTM F 1006 : 1986 : R2014 : EDT 1 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
API 1615 REDLINE : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
ASME B16.18 : 2012 | Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br> |
CSA 6.20 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
ANSI Z21.18 : 2007 : INC : ADD A : 2010 : R2012 | GAS APPLIANCE PRESSURE REGULATORS |
CSA B149.1 : 2010 : R2015 | NATURAL GAS AND PROPANE INSTALLATION CODE |
CSA B149HB : 2005 | NATURAL GAS AND PROPANE CODE HANDBOOK |
CGA 6.21 : 1997 : INC : ADD B : 2010 : R2016 | GAS APPLIANCE SEDIMENT TRAPS |
CSA B149.1 : 2010 | NATURAL GAS AND PROPANE INSTALLATION CODE |
CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R200800 | PARK MODEL TRAILERS |
CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
ASTM F 1006 : 1986 : R1997 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2016 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
CSA HGV 4.6 : 2013 | MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
MSS SP 88 : 2015 | DIAPHRAGM VALVES |
MIL-DTL-52618-9 Revision C:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, CROSSES (REDUCING SIZES) |
ASTM A 338 : 1984 : R2004 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
ASTM A 338 : 1984 : R2009 | Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) |
ASTM F 1006 : 1986 : R2008 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
MIL-DTL-52618-6 Revision E:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY (THREADED), 150-POUND, CAPS |
ASTM F 1172 : 1988 : R2004 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
CSA/ANSI LC 6:08 (R2018) | Natural gas operated diaphragm pumps |
CSA 6.18-02 (R2017) | Service Regulators for Natural Gas |
ASME B31.3:2016 | PROCESS PIPING |
CSA 6.22 : 2011 | LINE PRESSURE REGULATORS |
ASTM F 1199 : 1988 : R1998 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ANSI Z21.18 : 2007 : R2012 | GAS APPLIANCE PRESSURE REGULATORS |
ASTM F 1200 : 1988 : R2004 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
ASTM F 1199 : 1988 : R2010 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
MS39231 Revision C:2015 | ELBOW, PIPE STREET, 45 DEGREE, (150 & 300 POUNDS) |
ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
ASTM F 1201 : 1988 : R1998 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
MS39230 Revision C:2015 | ELBOW, PIPE-STREET, 90 DEGREE (150 AND 300 LBS) |
ANSI Z21.18 : 2007 : INC : ADD A : 2010 | GAS APPLIANCE PRESSURE REGULATORS |
ASTM F 1139 : 1988 : R1998 | Standard Specification for Steam Traps and Drains |
NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
ASTM F 1172 : 1988 : R1998 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
CSA Z240 VC SERIES : 2014 | |
B149.5-15 | Installation code for propane fuel systems and containers on motor vehicles |
BS 5306-5.1:1992 | Code of practice for fire extinguishing installations and equipment on premises. Halon systems Specification for halon 1301 total flooding systems |
ASTM F 1139 : 1988 : R2015 | Standard Specification for Steam Traps and Drains |
B214-16 | Installation code for hydronic heating systems |
CSA Z240 RV SERIES : 2014 | RECREATIONAL VEHICLES |
ANSI NGV4.8 : 2012 : R2013 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
ASTM F 1200 : 1988 : R2016 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
CSA 6.18 : 2002 | SERVICE REGULATORS FOR NATURAL GAS |
ASTM F 1201 : 1988 : R2004 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1271 : 1990 : R2012 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ANSI Z21.18 : 2007 : INC : ADD B : 2012 : R2017 | GAS APPLIANCE PRESSURE REGULATORS |
ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
CSA 6.22 : 2011 : INC : ADD A : 2012 : R2016 | LINE PRESSURE REGULATORS |
CSA Z241 SERIES : 2003 : INC : UPD 2 : 2013 : R201300 | PARK MODEL TRAILERS |
ASTM F 1172 : 1988 : R2010 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ANSI NGV4.8 :2012 | STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES |
CSA Z241 SERIES : 2003 | PARK MODEL TRAILERS |
ASTM F 1200 : 1988 : R2010 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 1271 : 1990 : R2018 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ANSI Z21.18 : 2007 : INC : ADD B : 2012 | GAS APPLIANCE PRESSURE REGULATORS |
CSA 6.22 : 2011 : ADD 1 : INC : ADD A : 2012 | LINE PRESSURE REGULATORS |
ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
ANSI Z21.71:1993 | AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION |
ASTM F 1199 : 1988 : R2015 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
CGA 6.21 : 1997 : R2012 | GAS APPLIANCE SEDIMENT TRAPS |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.