ASME B18.2.2 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
Available format(s)
Hardcopy , PDF
Superseded date
01-04-2022
Language(s)
English
Published date
30-11-2015
Publisher
Foreword
Committee Roster
Correspondence With the B18 Committee
1 Introduction
2 References
3 General Data
Mandatory Appendix
I - Slot Gages and Gaging for Slotted Nuts
Nonmandatory Appendices
A - Formulas for Nut Dimensions
B - Wrench Openings for Square and Hex Nuts
C - Procedure for Measuring Bearing Surface Runout
This Standard is intended to cover the complete general and dimensional data for the various types of inch series square and hex nuts, including machine screw nuts and coupling nuts, addressed by this Standard.
| DevelopmentNote |
Supersedes IFI 145. (07/2011) Supersedes IFI 128. (05/2012)
|
| DocumentType |
Standard
|
| ISBN |
9780791870327
|
| Pages |
38
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE C135.90-2014 | IEEE Standard for Pole Line Hardware for Overhead Line Construction |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| EN ISO 17292:2015 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| SAE J 2295 : 2016 | FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED) |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| API 6A CHINESE : 2011 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| API 14D : 1994 | SPECIFICATION FOR WELLHEAD SURFACE SAFETY VALVES AND UNDERWATER SAFETY VALVES FOR OFFSHORE SERVICE |
| MIL-V-24619 Base Document:1983 | VALVE, QUICK CLOSING, FOR SATURATED STEAM SERVICE |
| IEEE C37.42-2009 | IEEE Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices |
| DIN EN ISO 10434:2005-01 | BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES |
| MIL-DTL-32480-2 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| MSS SP 9 : 2013 | SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES |
| ASTM F 901 : 2001 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| API 608 RUSSIAN : 2012 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
| API 12F CHINESE : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| API 12D CHINESE : 2008 | SPECIFICATION FOR FIELD WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| EN ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002) |
| IEEE 810-2015 | IEEE Standard for Hydraulic Turbine and Generator Shaft Couplings and Shaft Runout Tolerances |
| ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| ASME B31.1 : 2016 | POWER PIPING |
| ANSI Z21.96 : 2014 | PORTABLE WATER HEATERS FOR OUTDOOR USE |
| ANSI Z21.5.2-2016/CSA 7.2:2016 | GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS |
| SAE J 2494-2 : 2017 | DIMENSIONAL SPECIFICATIONS FOR NON-METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM |
| AWWA C228 : 2014 | STAINLESS-STEEL PIPE FLANGE JOINTS FOR WATER SERVICE - SIZES 2 IN. THROUGH 72 IN. (50 MM THROUGH 1,800 MM) |
| SAE J 2494 : 2011 | PUSH-TO-CONNECT TUBE FITTINGS FOR USE IN THE PIPING OF VEHICULAR AIR BRAKE |
| ISO 27509:2012 | Petroleum and natural gas industries Compact flanged connections with IX seal ring |
| MSS SP 110 : 2010 | BALL VALVES THREADED, SOCKET-WELDING, SOLDER JOINT, GROOVED AND FLARED ENDS |
| MSS SP 85 : 2011 | GRAY IRON GLOBE & ANGLE VALVES, FLANGED AND THREADED ENDS |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASTM F 901 : 2001 : R2007 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| EN ISO 27509:2012/AC:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012/COR 1:2013) |
| API 608 : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| FF-N-836 Revision E:1994 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| ASTM F 704 : 1981 : R2009 | Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| ASTM F 1155 : 2010 | Standard Practice for Selection and Application of Piping System Materials |
| API 12B : 2014 | SPECIFICATION FOR BOLTED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| ASTM F 1145 : 2005 : R2017 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| API SPEC 12L : 2008 | SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS |
| MIL-S-11716 Revision D:1993 | SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| SAE J 2270 : 2016 | SHIP SYSTEMS AND EQUIPMENT - THREADED FASTENERS - INSPECTION, TEST, AND INSTALLATION GUIDANCE |
| AWWA C111/A21.11 : 2017 | RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS |
| ASTM F 2437/F2437M : 2017 : REDLINE | Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
| ASME B31.3:2016 | PROCESS PIPING |
| NBR 15827 : 2014 | INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST |
| ASME B16.42 : 2016 | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
| DIN EN ISO 17292:2016-05 | METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
| AWWA C503 : 2014 | WET-BARREL FIRE HYDRANTS |
| MIL-DTL-32529 Base Document:2015 | POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| CSA/ANSI Z21.10.1:19/CSA 4.1:19 | Gas water heaters, volume I, storage water heaters with input ratings of 75,000 Btu per hour or less |
| ASTM A 761/A761M : 2017-02 | SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
| API 591 RUSSIAN : 2008 | PROCESS VALVE QUALIFICATION PROCEDURE |
| MSS SP 128 : 2012 | DUCTILE IRON GATE VALVES |
| ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
| SAE J 2485 : 2012 | FASTENER PART STANDARD - MACHINE SCREW NUTS (METRIC AND INCH) |
| API 608 CHINESE : 2012 | METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS |
| ANSI/AWWA D120 : 2009 | THERMOSETTING FIBERGLASS-REINFORCED PLASTIC TANKS |
| ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
| MIL-PRF-13789 Revision E:1999 | STRAINERS, SEDIMENT: PIPELINE, BASKET TYPE |
| ASTM F 901 : 2001 : R2017 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| SAE J 2494-1 : 2017 | DIMENSIONAL SPECIFICATIONS FOR METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM |
| AASHTO M 314 : 1990 | SPECIFICATION FOR STEEL ANCHOR BOLTS |
| NEMA CC1 : 2009(R2015) | ELECTRIC POWER CONNECTORS FOR SUBSTATIONS |
| BS EN ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| API 623 : 2013 | STEEL GLOBE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ASTM F 704 : 1981 : R1996 : EDT 1 | Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| API 6A REDLINE : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ASTM D 6041 : 2011 | Standard Specification for Contact-Molded <span class='unicode'>“</span>Fiberglass<span class='unicode'>”</span> (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| IEEE C37.42-2009 | SWITCHGEAR DISTRIBUTION CUTOUTS AND FUSE LINKS SPECIFICATIONS |
| ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
| MIL-DTL-1189 Revision E:2018 | VALVE, GATE, BRONZE |
| SAE J 755 : 2015 | MARINE PROPELLER-SHAFT ENDS AND HUBS |
| UNE-EN ISO 17292:2016 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| SAE J 485 : 2016 | HOLES IN BOLT AND SCREW SHANKS AND SLOTS IN NUTS FOR COTTER PINS |
| MSS SP 70 : 2011 | GRAY IRON GATE VALVES, FLANGED AND THREADED ENDS |
| ASTM B 746/B746M : 2016 : REDLINE | Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches |
| API 591 : 2014 | PROCESS VALVE QUALIFICATION PROCEDURE |
| API 600 REDLINE : 2009 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| EN ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004) |
| MSS SP 78 : 2011 | GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS |
| ISO 10433:1994 | Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service |
| ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
| ASTM F 594 : 2009 : EDT 1 | Standard Specification for Stainless Steel Nuts |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| ASTM D 6256/D6256M : 2016 : REDLINE | Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| MIL V 24509 : A | VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE |
| AASHTO M 292M/M 292 : 2015 | SPECIFICATION FOR CARBON AND ALLOY STEEL NUTS FOR BOLTS FOR HIGH-PRESSURE OR HIGH-TEMPERATURE SERVICE, OR BOTH |
| MSS SP 136 : 2014 | DUCTILE IRON SWING CHECK VALVES |
| API 608 REDLINE : 2008 | METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS |
| API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| ANSI Z21.10.3 : 2015 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| ASTM F 704 : 1981 : R2014 | Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| ASTM D 6880/D6880M : 2011 : REDLINE | Standard Specification for Wood Boxes |
| ASTM F 432 : 2013 : REDLINE | Standard Specification for Roof and Rock Bolts and Accessories |
| ANSI Z21.10.1 : 2017 | GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| ASTM F 1155 : 2010 : R2015 | Standard Practice for Selection and Application of Piping System Materials |
| MSS SP 106 : 2012 | CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
| ANSI Z21.74-2017 | Portable refrigerators |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| BS EN ISO 10423:2009 | Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
| ASTM D 7478/D7478M : 2011 | Standard Specification for Heavy Duty Sheathed Wood Crates |
| MIL-B-16115 Revision G:1991 | BUOYS, MOORING, AND MARKER |
| ASTM F 1145 : 2005 : R2011 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| EN ISO 13628-4:2010/AC:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
| API 12F : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| GGG-W-644 Revision C:1992 | WRENCH, SOCKET (WHEEL NUT) |
| MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| BS ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
| IFI 125 : 2007 | TEST PROCEDURE FOR THE PERFORMANCE OF ADHESIVE COATED PREVAILING-TORQUE SCREWS |
| MIL-T-53066 Revision B:1994 | TANK, FABRIC, COLLAPSIBLE, 5000 BARREL, FUEL |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| MSS SP 42 : 2013 | CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600) |
| API 603 : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
| BS EN ISO 10434:2004 | Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries |
| BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
| ANSI Z21.89-2017/CSA 1.18-2017 | Outdoor cooking specialty gas appliances |
| SAE J 482 : 2016 | HEXAGON HIGH NUTS |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MIL-DTL-24509 Revision B:2017 | Valves, Flanged, Balland Plugfor Sewageand Seawater Service |
| ASHRAE 26 : 2010 | MECHANICAL REFRIGERATION AND AIR-CONDITIONING INSTALLATIONS ABOARD SHIP |
| AASHTO M 167M/M 167 : 2014 | SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| MIL-DTL-32480-3 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| ASTM F 594 : 2009 | Standard Specification for Stainless Steel Nuts |
| API 599 RUSSIAN : 2013 | METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS |
| BS EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| ASTM F 901 : 2001 : R2012 | Standard Specification for Aluminum Transmission Tower Bolts and Nuts |
| EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
| ACI 351.2R : 2010 | REPORT ON FOUNDATIONS FOR STATIC EQUIPMENT |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| MIL-DTL-13444 Revision H:2006 | Hose and Hose Assemblies, Rubber: Fuel and Oil |
| BS EN ISO 27509:2012 | Petroleum and natural gas industries. Compact flanged connections with IX seal ring |
| ASTM D 6255/D6255M : 2005 : R2011 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
| MIL-PRF-13803 Revision F:1996 | VALVE, GATE - DOUBLE-DISK, CAST-IRON OR STEEL |
| ASTM F 704 : 1981 : R2001 | Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| API 591 REDLINE : 2008 | PROCESS VALVE QUALIFICATION PROCEDURE |
| API 600 RUSSIAN : 2009 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ASTM F 1554 : 2018 : REDLINE | Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength |
| ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| FF-C-450 Revision G:2017 | CLAMPS, WIRE ROPE |
| ASTM F 1145 : 2005 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| CSA/ANSI NGV 5.2-2017 | Vehicle fueling appliances (VFA) |
| API 603 RUSSIAN : 2013 | CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS |
| ASTM D 6255/D6255M:2005 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
| ASTM F 594 : 2009 : R2015 | Standard Specification for Stainless Steel Nuts |
| API 600 CHINESE : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| API 599 : 2013 | METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS |
| ANSI Z21.10.3-2017/CSA 4.3:2017 | GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS |
| MSS SP 71 : 2011 | GRAY IRON SWING CHECK VALVES, FLANGED AND THREADED ENDS |
| AWWA C230 : 2016 | STAINLESS-STEEL FULL-ENCIRCLEMENT REPAIR AND SERVICE CONNECTION CLAMPS FOR 2-IN. THROUGH 12-IN. (50-MM THROUGH 300-MM) PIPE |
| SAE J 995 : 2017 | MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS |
| IEEE C135.80-2012 | IEEE Standard for Fasteners for Overhead Line Construction |
| ASTM D 7478/D7478M : 2011 : R2017 | Standard Specification for Heavy Duty Sheathed Wood Crates |
| ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
| ASME B18.24 : 2015 | PART IDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD FOR B18 FASTENER PRODUCTS |
| ASME B18.18 : 2017 | QUALITY ASSURANCE FOR FASTENERS |
| SAE J 995 : 2012 | MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS |
£37.94
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English - DRM
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.