ASME B31.1 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
POWER PIPING
Hardcopy , PDF
21-08-2021
English
30-06-2016
Foreword
Committee Roster
Introduction
Summary of Changes
Chapter I - Scope and Definitions
Chapter II - Design
Chapter III - Materials
Chapter IV - Dimensional Requirements
Chapter V - Fabrication, Assembly, and Erection
Chapter VI - Inspection, Examination, and Testing
Chapter VII - Operation and Maintenance
Mandatory Appendices
A - Allowable Stress Tables
B - Thermal Expansion Data
C - Moduli of Elasticity
D - Flexibility and Stress Intensification Factors
F - Referenced Standards
G - Nomenclature
H - Preparation of Technical Inquiries
J - Quality Control Requirements for Boiler External
Piping (BEP)
N - Rules for Nonmetallic Piping and Piping Lined With
Nonmetals
Nonmandatory Appendices
II - Rules for the Design of Safety Valve Installations
IV - Corrosion Control for ASME B31.1 Power Piping Systems
V - Recommended Practice for Operation, Maintenance, and
Modification of Power Piping Systems
VI - Approval of New Materials
VII - Procedures for the Design of Restrained Underground Piping
VIII - Guidelines for Determining If Low-Temperature Service
Requirements Apply
Index
Describes requirements for the design, materials, fabrication, erection, test, inspection, operation, and maintenance of piping systems.
DocumentType |
Standard
|
ISBN |
9780791870723
|
Pages |
366
|
PublisherName |
American Society of Mechanical Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ASCE 7 10 : 2011 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
API 16D:2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
UFC 3-430-02FA : Change 1 | UNIFIED FACILITIES CRITERIA - CENTRAL STEAM BOILER PLANTS |
MIL E 17813 : F | EXPANSION JOINTS, PIPE, METALLIC BELLOWS |
AWWA M45 : 3 | FIBERGLASS PIPE DESIGN |
API 538 : 2015 | INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
NFPA 32 : 2016 | DRYCLEANING FACILITIES |
AWS D10.10/D10.10M : 1999 : R2009 | RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING |
API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
ANSI/CSA AMERICA FC 3-2004 (R2017) | PORTABLE FUEL CELL POWER SYSTEMS |
A-A-50559 Base Document:1996 | VALVES, TEMPERATURE-REGULATING (THERMOSTATICALLY CONTROLLED) |
ANS 57.7 : 88(R1997) | DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (WATER POOL TYPE) |
NFPA 86D : 1999 | INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE |
API 579-1 : 2016 | FITNESS-FOR-SERVICE |
IEEE C37.122.1-2014 REDLINE | IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
UFC 3-310-04 : Change 1 | UNIFIED FACILITIES CRITERIA - SEISMIC DESIGN FOR BUILDINGS |
UNI EN 13941 : 2011 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
EEMUA 223 : 2010 | PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER |
ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
AWS EG4.0 : 1996 | GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL: LEVEL 3, EXPERT WELDER |
DEFSTAN 02-348/2(2008) : 2008 | GUIDE TO THE DESIGN, CORROSION ASSESSMENT AND STRESS ANALYSIS OF STEAM SYSTEMS PIPEWORK |
API 16D CHINESE : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
MIL V 18500 : B | VALVE, REDUCING, COMPRESSED GAS |
ANS 57.2 : 1983 | LIGHT WATER REACTOR SPENT FUEL STORAGE FACILITIES, REQUIREMENTS FOR, |
API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
MSS SP 99 : 2016 | INSTRUMENT VALVES |
API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
AWS D10.10/D10.10M : 1999 | RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING |
CSA B355 : 2015 | LIFTS FOR PERSONS WITH PHYSICAL DISABILITIES |
CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) |
ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
NFPA 8504 : 1996 | ATMOSPHERIC FLUIDIZED-BED BOILER OPERATION |
MIL-M-18294 Revision D:1987 | METER, FLUID QUANTITY VOLUMETRIC |
UFC 4-826-10 : 2002 | UNIFIED FACILITIES CRITERIA - DESIGN: REFRIGERATION SYSTEMS FOR COLD STORAGE |
MIL-DTL-17557 Revision F:2013 | Coolers, Fluid, Industrial, Naval Shipboard (Sample Water Coolers) |
AWS B5.15 : 2010 | SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS |
ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
MIL-DTL-18436 Revision G:2017 | Valves, Check - Bronze -and Steel-Body |
AWS B5.4 : 2005 | SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES |
MSS SP 97 : 2012 | INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS |
API 551 : 2016 | PROCESS MEASUREMENT |
NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
MSS SP 104 : 2012 | WROUGHT COPPER SOLDER-JOINT PRESSURE FITTINGS |
ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
MSS SP 69 : 2003 | PIPE HANGERS AND SUPPORTS - SELECTION AND APPLICATION |
ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
MSS SP 130 : 2013 | BELLOWS SEALS FOR INSTRUMENT VALVES |
API 16D RUSSIAN : 2004 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
MSS SP 105 : 2016 | INSTRUMENT VALVES FOR CODE APPLICATIONS |
MSS SP 123 : 2013 | NON-FERROUS THREADED AND SOLDER-JOINT UNIONS FOR USE WITH COPPER WATER TUBE |
ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
EN 13941:2009+A1:2010 | Design and installation of preinsulated bonded pipe systems for district heating |
MSS SP 109 : 2012 | WELD-FABRICATED COPPER SOLDER-JOINT PRESSURE FITTINGS |
NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
ASME FFS 1 : 2007 | FITNESS-FOR-SERVICE |
MSS SP 95 : 2014 | SWAGE(D) NIPPLES AND BULL PLUGS |
EEMUA 184 : 2009 | GUIDE TO THE ISOLATION OF PRESSURE RELIEVING DEVICES |
MIL-H-82000 Revision C:1990 | HEATER, HOT OIL, 1.5, 3 AND 5 MILLION BTU/H OUTPUT, SKID MOUNTED |
NFPA 67 : 2016 | GUIDE ON EXPLOSION PROTECTION FOR GASEOUS MIXTURES IN PIPE SYSTEMS |
API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
ANS 40.35 : 1991 | VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE |
CSA FC 3 : 2004 | PORTABLE FUEL CELL POWER SYSTEMS |
BS ISO 18647:2017 | Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms |
AWS D10.7M/D10.7 : 2008 | GUIDE FOR THE GAS SHIELDED ARC WELDING OF ALUMINUM AND ALUMINUM ALLOY PIPE |
API 16D : 2004 : R2013 | SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT |
API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
CSA Z180.1 : 2013 | COMPRESSED BREATHING AIR AND SYSTEMS |
ANSI B11.17 : 2004 : R2009 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
AWS TSS : 1985 | THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
EN ISO 10440-2:2001 | Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001) |
NFPA 12 : 2018 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
NFPA 805 : 2015 | PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
DEFSTAN 02-772/1(2007) : 2007 | WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
API 12F : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
MIL-E-17814 Revision F:1992 | EXPANSION JOINTS, PIPE, SLIP-TYPE PACKED |
API 577 CHINESE : 2013 | WELDING PROCESSES, INSPECTION AND METALLURGY |
API 12F CHINESE : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
NFPA 8506 : 1998 | HEAT RECOVERY STEAM GENERATOR SYSTEMS |
API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
API 620 CHINESE : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
NFPA 804 : 2020 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
NFPA 8502 : 1999 | PREVENTION OF FURNACE EXPLOSIONS/IMPLOSIONS IN MULTIPLE BURNER BOILERS |
NFPA 803 : 1998 | FIRE PROTECTION FOR LIGHT WATER NUCLEAR POWER PLANTS |
NFPA 86C : 1999 | INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE |
UFC 3-430-01FA : 2003 | UNIFIED FACILITIES CRITERIA - HEATING AND COOLING DISTRIBUTION SYSTEMS |
NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
ANSI B11.17 : 2004 : R2015 | SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES |
MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
MIL-DTL-17813 Revision H:2009 | Expansion Joints, Pipe, Metallic Bellows, General Specification for |
ANS 58.2 : 1988 | DESIGN BASIS FOR PROTECTION OF LIGHT WATER NUCLEAR POWER PLANTS AGAINST THE EFFECTS OF POSTULATED PIPE RUPTURE |
ASTM F 2014 : 2000 : R2019 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
ASTM F 1172 : 1988 : R2010 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
CSA N293 : 2012 | FIRE PROTECTION FOR NUCLEAR POWER PLANTS |
ISO 3977-3:2004 | Gas turbines — Procurement — Part 3: Design requirements |
ASTM F 1271 : 1990 : R2001 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ASTM F 1271 : 1990 : R2018 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
ASTM F 1386 : 1992 : R2010 | Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
ASTM F 1201 : 1988 : R2010 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1201 : 1988 : R2004 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1271 : 1990 : R2012 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ASTM F 1200 : 1988 : R2004 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 2015 : 2000 | Standard Specification for Lap Joint Flange Pipe End Applications |
ASTM F 1172 : 1988 : R1998 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASTM F 2015 : 2000 : R2006 | Standard Specification for Lap Joint Flange Pipe End Applications |
ASTM F 1120 : 1987 : R2010 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
ASTM F 1020 : 1986 : R2018 | Standard Specification for Line-Blind Valves for Marine Applications |
CSA Z275.2 : 2015 | OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS |
ASTM F 1120 : 1987 : R2004 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
ASTM F 1139 : 1988 : R2015 | Standard Specification for Steam Traps and Drains |
ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
ASTM F 1298 : 1990 : R2012 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
ASTM F 1199 : 1988 : R2004 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
BS ISO 13577-3:2016 | Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases |
CSA N289.3 : 2010 : INC : UPD 1 : 2012 | DESIGN PROCEDURES FOR SEISMIC QUALIFICATION OF NUCLEAR POWER PLANTS |
BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
ASTM F 2014 : 2000 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
ASTM F 1298 : 1990 : R2018 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
ASTM F 1386 : 1992 : R2016 : EDT 1 | Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding |
ASTM F 1007 : 1986 : R1996 : EDT 1 | Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application |
ISO 18647:2017 | Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms |
NEMA SM 24-1991 (R1997, R2002) | LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW |
VDI 3842:2004-06 | Vibrations in piping systems |
CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
CSA N290.8 : 2015 | TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS |
ASTM F 1298 : 1990 : R2006 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
IEEE C37.38-1989 | IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches |
BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
ASTM F 1122 : 2004 | Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
ASTM F 1122 : 2004 : R2015 : EDT 1 | Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
ASTM F 2014 : 2000 : R2006 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
N289.1-08 (R2013) | General requirements for seismic design and qualification of CANDU nuclear power plants |
BS ISO 16111:2008 | Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride |
ASTM F 1155 : 2010 | Standard Practice for Selection and Application of Piping System Materials |
ASTM F 1298 : 1990 : R2001 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
ASME PV CODE 7 : 2017 | BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS |
ASTM F 681 : 1982 : R1998 | Standard Practice for Use of Branch Connections |
ISO 13577-3:2016 | Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases |
NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
ASTM A 1091/A1091M : 2016 | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service |
ASTM F 1298 : 1990 : R1995 : EDT 1 | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
ASTM A 1091/A1091M : 2016 : EDT 1 | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service |
ASTM F 1020 : 1986 : R2006 | Standard Specification for Line-Blind Valves for Marine Applications |
ASTM F 1201 : 1988 : R2016 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
N289.3-10 (R2015) | Design procedures for seismic qualification of nuclear power plants |
CAN/CSA-Z662-15 | Oil and gas pipeline systems |
ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
ASTM F 1199 : 1988 : R2010 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ASTM F 1386 : 1992 : R1997 | Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
CSA N293 : 2012 : INC : UPD 1 : 2017 : R201700 | FIRE PROTECTION FOR NUCLEAR POWER PLANTS |
ASTM F 1122 : 2004 : R2010 | Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
ASTM F 1139 : 1988 : R2004 | Standard Specification for Steam Traps and Drains |
NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
ASTM F 1200 : 1988 : R1998 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
NFPA 87 : 2018 | FLUID HEATERS |
ASTM B 673 : 2005 : R2011 : EDT 1 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
ASTM F 1172 : 1988 : R2015 : EDT 1 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
ASTM F 1007 : 1986 : R2002 | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
CSA N289.1 : 2008 : INC : UPD 1 : 2014: R201300 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
CSA N393:13 (R2018) | Fire protection for facilities that process, handle, or store nuclear substances |
ANSI/ASSE A10.15 : 1995 : R2005 | SAFETY REQUIREMENTS FOR DREDGING |
ASTM F 1120 : 1987 : R1998 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
ASTM F 1386 : 1992 : R2004 | Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
ASTM F 1200 : 1988 : R2010 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 1172 : 1988 : R2004 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASTM F 1020 : 1986 : R2001 | Standard Specification for Line-Blind Valves for Marine Applications |
ASTM F 1139 : 1988 : R1998 | Standard Specification for Steam Traps and Drains |
ISO 24817:2017 | Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
S6-14 | Canadian Highway Bridge Design Code |
CSA N289.1 : 2008 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
ASTM F 1200 : 1988 : R2016 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
NEMA SM 23-1991 (R1997, R2002) | STEAM TURBINES FOR MECHANICAL DRIVE SERVICE |
ASTM F 1199 : 1988 : R2015 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ASTM F 1271 : 1990 : R1995 : EDT 1 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ASTM B 673 : 2005 : EDT 1 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
ANSI/ASSE A10.15 : 1995 : R2011 | SAFETY REQUIREMENTS FOR DREDGING |
ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
UFC 3-430-11 : 2001 | UNIFIED FACILITIES CRITERIA - BOILER CONTROL SYSTEMS |
BS EN ISO 10440-2:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free) |
ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
ASTM F 681 : 1982 : R2004 | Standard Practice for Use of Branch Connections |
ASTM B 673 : 2005 : R2011 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
ISO/TS 24817:2006 | Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
CSA N289.3 :2010 | DESIGN PROCEDURES FOR SEISMIC QUALIFICATION OF NUCLEAR POWER PLANTS |
ASTM F 1120 : 1987 : R2015 | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
ASTM F 2014 : 2000 : R2013 | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
ASTM F 1020 : 1986 : R1996 : EDT 1 | Standard Specification for Line-Blind Valves for Marine Applications |
ISO 19859:2016 | Gas turbine applications Requirements for power generation |
ASTM F 2934 : 2012 | Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications |
ASTM F 1007 : 1986 : R2014 | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
ASTM F 1323 : 2014 : REDLINE | Standard Specification for Shipboard Incinerators |
ASTM F 681 : 1982 : R2008 | Standard Practice for Use of Branch Connections |
ASTM F 1199 : 1988 : R1998 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ASTM F 1139 : 1988 : R2010 | Standard Specification for Steam Traps and Drains |
ASTM F 2934 : 2012 : R2018 | Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications |
ASTM F 2015 : 2000 : R2013 | Standard Specification for Lap Joint Flange Pipe End Applications |
ASTM B 673 : 2005 : R2016 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
ASTM F 1201 : 1988 : R1998 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
CSA N289.1 : 2008 : INC : UPD 1 : 2015 : R201300 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
N293-12 (R2017) | Fire protection for nuclear power plants |
ASTM F 1155 : 2010 : R2015 | Standard Practice for Selection and Application of Piping System Materials |
CSA N293 : 2012(R2018) | FIRE PROTECTION FOR NUCLEAR POWER PLANTS |
ASTM F 1007 : 1986 : R2007 | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
BS EN 13941 : 2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
BS ISO 3977-3:2004 | Gas turbines. Procurement Design requirements |
ASTM F 1020 : 1986 : R2011 | Standard Specification for Line-Blind Valves for Marine Applications |
ASTM B 834 : 2017 : REDLINE | Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts |
DD CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
ASTM F 1271 : 1990 : R2006 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
BS EN ISO 24817:2017 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
ASTM B 673 : 2005 | Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe |
API SPEC 12L : 2008 | SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS |
CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
API 620 REDLINE : 2008 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
NFPA 85C : 1991 | PREVENTION OF FURNACE EXPLOSIONS & IMPLOSIONS IN MULTIPLE BURNER BOILER FURNACES |
ASME PTC19.11 : 2008 | STEAM AND WATER SAMPLING, CONDITIONING, AND ANALYSIS IN THE POWER CYCLE |
NBR 12615 : 1992 | SISTEMA DE COMBATE A INCENDIO POR ESPUMA |
API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
ASME STP-PT-003 : 2005 | HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES |
ANSI B88.2 : 1974 | PROCEDURE FOR BENCH CALIBRATION OF TANK LEVEL GAGING TAPES AND SOUNDING RULES |
API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
ASME B16.50 : 2013 | WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
ASME PTB 11 : 2017 | GUIDE FOR ASME BPVC SECTION 1 STAMP HOLDERS |
ASME PTC19.3 : 1974(R2004) | PERFORMANCE TEST CODE - PART 3: TEMPERATURE MEASUREMENT |
ASME PTC19.11 : 2008 : R2013 | STEAM AND WATER SAMPLING, CONDITIONING, AND ANALYSIS IN THE POWER CYCLE |
ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
ASME PTC19.3 TW : 2016 | THERMOWELLS |
ASME STP-PT-002 : 2005 | ASME SECTION 1 PED GUIDE - SUPPLEMENT TO GUIDE FOR ASME STAMP HOLDERS USE OF ASME SECTION 1 TO MEET THE EC PRESSURE EQUIPMENT DIRECTIVE (97/23/EC) |
API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
ASTM B 625 : 2017 : REDLINE | Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip |
ASTM B 247M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
ASTM B 234M : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
ASTM B 688 : 1996 | Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip |
ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
AWWA C606 : 2015 | GROOVED AND SHOULDERED JOINTS |
AWWA C153/A21.53 : 2011 | DUCTILE-IRON COMPACT FITTINGS |
ASTM A 691 : 1998 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
ASTM B 361 : 2016 : REDLINE | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
AWWA C207 : 2013 | STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM) |
ASTM E 446 : 2015 : REDLINE | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ASTM B 234 : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
MSS SP 6 : 2017 | STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS |
ASTM B 338 : 2017 : REDLINE | Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers |
ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
ASME TDP 1 : 2013 | PREVENTION OF WATER DAMAGE TO STEAM TURBINES USED FOR ELECTRIC POWER GENERATION: FOSSIL-FUELED PLANTS |
ASTM A 376/A376M : 2017 : REDLINE | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
ASME B18.2.4.6M : 2010 | METRIC HEAVY HEX NUTS |
ASTM B 409 : 2006 | Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip |
ASTM B 265 : 2015 : REDLINE | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
AWWA C500 : 2009 | METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
ASTM B 467 : 2014 : REDLINE | Standard Specification for Welded Copper-Nickel Pipe |
NFPA 1963 : 2014 | FIRE HOSE CONNECTIONS |
ASTM B 575 : 2017 : REDLINE | Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
ASTM A 181/A181M : 2014 : REDLINE | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
ASTM A 299/A299M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
ANSI/AWWA C115/A21.15 : 2011 | FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES |
MSS SP 83 : 2014 | CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS) |
ASTM B 473 : 2007 | Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire |
ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
ANSI/AWWA C200 : 2017 | STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER |
ASTM A 409/A409M : 2015 : REDLINE | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
ASTM B 466/B 466M : 2014-05 | SPECIFICATION FOR SEAMLESS COPPER-NICKEL PIPE AND TUBE |
ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
FCI 79.1 : 2009 | STANDARD FOR PROOF OF PRESSURE RATINGS FOR PRESSURE REGULATORS |
ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
MSS SP 80 : 2013 | BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES |
ASTM A 358/A358M : 2015 : REDLINE | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
ASME B16.42 : 2016 | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
AWWA C151/A21.51 : 2017 | DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
ASME B31.3:2016 | PROCESS PIPING |
MSS SP 67 : 2017 | BUTTERFLY VALVES |
ASTM B 584 : 2014 : REDLINE | Standard Specification for Copper Alloy Sand Castings for General Applications |
AWWA C600 : 2010 | INSTALLATION OF DUCTILE-IRON MAINS AND THEIR APPURTENANCES |
ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
AWWA C208 : 2012 | DIMENSIONS FOR FABRICATED STEEL WATER PIPE FITTINGS |
AWWA C150/A21.50 : 2014 | THICKNESS DESIGN OF DUCTILE-IRON PIPE |
ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
ASCE 7 05 : 2006 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
PFI ES 24 : 2013 | PIPE BENDING METHODS, TOLERANCES, PROCESS AND MATERIAL REQUIREMENTS |
ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
ASTM B 161 : 2005 : EDT 1 | Standard Specification for Nickel Seamless Pipe and Tube |
ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
MSS SP 97 : 2012 | INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS |
API 5L : 2012 | LINE PIPE |
AWWA C304 : 2014 | DESIGN OF PRESTRESSED CONCRETE CYLINDER PIPE |
ANSI/AWWA C300 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
ASTM A 437/A437M : 2015 : REDLINE | Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service |
AWWA C504 : 2015 | RUBBER-SEATED BUTTERFLY VALVES |
ASTM A 254 : 1997 | Standard Specification for Copper-Brazed Steel Tubing |
AWS D10.10 : 1990 | LOCAL HEATING OF WELDS IN PIPING AND TUBING, RECOMMENDED PRACTICE FOR |
ASME B16.18 : 2012 | Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br> |
MSS SP 42 : 2013 | CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600) |
ASTM A 420/A420M : 2016 : REDLINE | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
ASTM A 214/A214M : 1996 | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
MSS SP 68 : 2017 | HIGH PRESSURE BUTTERFLY VALVES WITH OFFSET DESIGN |
MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
MSS SP 51 : 2012 | CLASS 150LW CORROSION RESISTANT FLANGES AND CAST FLANGED FITTINGS |
ASTM A 928/A928M : 2014 : REDLINE | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
AWS A3.0 : 0 | STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
AWWA C302 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
ASTM B 61 : 2015 : REDLINE | Standard Specification for Steam or Valve Bronze Castings |
ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
AWS QC1 : 2007 | STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS |
MSS SP 53 : 2012 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD |
AWWA C111/A21.11 : 2017 | RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS |
ASTM B 861 : 2014 : REDLINE | Standard Specification for Titanium and Titanium Alloy Seamless Pipe |
ASME B36.10M : 2015 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
ASTM B 649 : 2017 : REDLINE | Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925,<brk/> UNS N08031, UNS N08034, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire |
NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
MSS SP 94 : 2015 | QUALITY STANDARD FOR FERRITIC AND MARTENSITIC STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - ULTRASONIC EXAMINATION METHOD |
ASTM A 965/A965M : 2014-05 | SPECIFICATION FOR STEEL FORGINGS, AUSTENITIC, FOR PRESSURE AND HIGH TEMPERATURE PARTS |
AWWA C110/A21.10 : 2012 | DUCTILE-IRON AND GRAY-IRON FITTINGS |
ASTM A 453/A453M : 2017 : REDLINE | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
MSS SP 61 : 2013 | PRESSURE TESTING OF VALVES |
ASTM A 217/A217M : 2014 : REDLINE | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
ASTM B 828 : 2016 : REDLINE | Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings |
AWWA C301 : 2014 | PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
MSS SP 95 : 2014 | SWAGE(D) NIPPLES AND BULL PLUGS |
MSS SP 93 : 2014 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - LIQUID PENETRANT EXAMINATION METHOD |
ASTM B 675 : 2002 | Standard Specification for UNS N08367 Welded Pipe |
ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
ASTM E 125 : 1963 : R2003 | Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
ASTM A 449 : 2014 : REDLINE | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
MSS SP 106 : 2012 | CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300 |
ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
ASTM B 43 : 2015 : REDLINE | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
ASTM A 139/A139M : 2016 : REDLINE | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
ASTM B 151/B151M : 2013 : REDLINE | Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar |
ASTM A 530/A530M : 2012-06 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE |
MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
ASME B16.4 : 2016 | GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250 |
AWWA C509 : 2015 | RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE |
ASTM B 705 : 2017 : REDLINE | Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe |
ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
MSS SP 75 : 2014 | HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS |
ASME B16.50 : 2013 | WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS |
ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
MSS SP 54 : 2013 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - RADIOGRAPHIC EXAMINATION METHOD |
ASTM B 862 : 2014 : REDLINE | Standard Specification for Titanium and Titanium Alloy Welded Pipe |
API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
MSS SP 9 : 2013 | SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES |
MSS SP 88 : 2015 | DIAPHRAGM VALVES |
ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
PFI ES 16 : 0 | ACCESS HOLES, BOSSES AND PLUGS FOR RADIOGRAPHIC INSPECTION OF PIPE WELDS |
ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ASTM B 62 : 2017 : REDLINE | Standard Specification for Composition Bronze or Ounce Metal Castings |
ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
ASTM B 381 : 2013 : REDLINE | SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS |
MSS SP 79 : 2011 | SOCKET WELDING REDUCER INSERTS |
ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
ASTM A 671 : 2009 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
ASTM A 815/A815M : 2017 | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
ASTM B 804 : 2002 | Standard Specification for UNS N08367 and UNS N08926 Welded Pipe |
MSS SP 43 : 2013 | WROUGHT AND FABRICATED BUTT-WELDING FITTINGS FOR LOW PRESSURE, CORROSION RESISTANT APPLICATIONS |
MSS SP 58 : 2009 | PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION |
ASME B16.25 : 2012 | BUTTWELDING ENDS |
ASTM A 285/A285M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
MSS SP 105 : 2016 | INSTRUMENT VALVES FOR CODE APPLICATIONS |
ASME B16.48 : 2015 | LINE BLANKS |
ASME B16.3 : 2016 | MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.