• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM A 123/A123M : 2017 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
Available format(s)

PDF

Language(s)

English

Published date

01-09-2017

CONTAINED IN VOL. 01.06, 2018 Defines the requirements for zinc coating (galvanizing) by the hot-dip process on iron and steel products made from rolled pressed and forged shapes, castings, plates, bars, and strips.

1.1This specification covers the requirements for zinc coating (galvanizing) by the hot-dip process on iron and steel products made from rolled pressed and forged shapes, castings, plates, bars, and strips.

1.2This specification covers both unfabricated products and fabricated products, for example, assembled steel products, structural steel fabrications, large tubes already bent or welded before galvanizing, and wire work fabricated from uncoated steel wire. This specification also covers steel forgings and iron castings incorporated into pieces fabricated before galvanizing or which are too large to be centrifuged (or otherwise handled to remove excess galvanizing bath metal).

Note 1:This specification covers those products previously addressed in Specifications A123-78 and A386-78.

1.3This specification does not apply to wire, pipe, tube, or steel sheet which is galvanized on specialized or continuous lines, or to steel less than 22 gage (0.0299 in.) [0.76 mm] thick.

1.4The galvanizing of hardware items that are to be centrifuged or otherwise handled to remove excess zinc (such as bolts and similar threaded fasteners, castings and rolled, pressed and forged items) shall be in accordance with Specification A153/A153M.

1.5Fabricated reinforcing steel bar assemblies are covered by the present specification. The batch galvanizing of separate reinforcing steel bars shall be in accordance with Specification A767/A767M and the continuous galvanizing of reinforcing bars shall be in accordance with Specification A1094/A1094M.

1.6This specification is applicable to orders in either inch-pound units (as A123) or SI units (as A123M). Inch-pound units and SI units are not necessarily exact equivalents. Within the text of this specification and where appropriate, SI units are shown in parentheses. Each system shall be used independently of the other without combining values in any way. In the case of orders in SI units, all testing and inspection shall be done using the metric equivalent of the test or inspection method as appropriate. In the case of orders in SI units, such shall be stated to the galvanizer when the order is placed.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
A 05
DevelopmentNote
Supersedes ASTM A 123, ASTM A 386. (12/2001)
DocumentType
Redline
Pages
10
PublisherName
American Society for Testing and Materials
Status
Current

API SPEC 12D : 2017 SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
ASTM F 1019M : 2000 Standard Specification for Steel Deck Gear Stowage Box [Metric]
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ACI 439.4R : 2009 REPORT ON STEEL REINFORCEMENT - MATERIAL PROPERTIES AND U.S. AVAILABILITY
ASTM C 1802 : 2014 : EDT 1 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref >
MIL-DTL-32108 Base Document:2004 SPREADER BARS FOR LIFTING SLINGS
I.S. EN ISO 25457:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
AWS WHC4.03 : 0 MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 3: COATED STEELS
C22.2 NO. 126.1-17 Metal cable tray systems (Binational standard with NEMA VE 1-2017)
ASTM D 6255/D6255M:2005 Standard Specification for Steel or Aluminum Slotted Angle Crates
ASTM E 2112 : 2007 : R2016 Standard Practice for Installation of Exterior Windows, Doors and Skylights
ASTM C 1802 : 2014 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures<rangeref></rangeref >
ASTM F 2919/F2919M : 2012 : R2018 Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.<sup>2</sup > [3871 mm<sup>2</sup>] in Panels
PIP PNC00001 : 2013 PIPE SUPPORT CRITERIA FOR ASME B31.3 - METALLIC PIPING
MIL-DTL-14072 Revision F:2013 FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
A-A-52475 Revision C:2014 CHOCK, WHEEL
CSA S413 : 2014 PARKING STRUCTURES
ANSI/ASSP Z359.16:2016 Safety Requirements for Climbing Ladder Fall Arrest Systems Part of the <br>Fall Protection Code
ASTM A 741 : 2011 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
MIL-DTL-23554 Revision E:2009 WASHER-EXTRACTOR, LAUNDRY, 16- TO 20-POUND CAPACITY (SUBMARINE SERVICE)
ANSI/AWWA D107-16 ERR 1(CSV) COMPOSITE ELEVATED TANKS FOR WATER STORAGE
AASHTO LRFDLTS 1 : 1900 LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS
A-A-52612 Revision A:2010 BUSES, MOTOR: COMPACT, FORWARD CONTROL, 8600 TO 13 500 POUNDS GVW, 12, 16 AND 20 PASSENGER, 4X2
ASTM F 987 : 2004 : R2010 Standard Specification for Portable Intermediate Flush Deck Stanchion
ASTM F 2780 : 2009 : R2014 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers
ASTM A 964/A964M : 2017 : REDLINE Standard Specification for Corrugated Steel Box Culverts
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ASCE/SEI 10 15 : 2015 DESIGN OF LATTICED STEEL TRANSMISSION STRUCTURES
ASCE 48 05 : 2006 DESIGN OF STEEL TRANSMISSION POLE STRUCTURES
ACI 301 : 2016 SPECIFICATIONS FOR STRUCTURAL CONCRETE
ASTM F 987 : 2004 : R2017 Standard Specification for Portable Intermediate Flush Deck Stanchion
ASTM D 7803 : 2012 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
ASTM F 2548 : 2012 : R2018 Standard Specification for Expanded Metal Fence Systems for Security Purposes
ASTM D 6255/D6255M : 2005 : R2011 Standard Specification for Steel or Aluminum Slotted Angle Crates
NACE SP 01 08 : 2008 CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS
ANSI C136.13 : 1992 ROADWAY AND AREA LIGHTING EQUIPMENT - METAL BRACKETS FOR WOOD POLES
NEMA VE 1:2017 Metal Cable Tray Systems
ASTM A 741 : 2011 : EDT 1 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
AWWA D121 : 2014 BOLTED ABOVEGROUND THERMOSETTING FIBERGLASS-REINFORCED PLASTIC PANEL-TYPE TANKS FOR WATER STORAGE
API 537 CHINESE : 2008 FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
ASTM A 385/A385M : 2017 : REDLINE Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A 761/A761M : 2017-02 SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES
IEEE 1070-2006 IEEE Guide for the Design and Testing of Transmission Modular Restoration Structure Components
API 537 REDLINE : 2008 FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
API 538 : 2015 INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
A-A-52163 Revision B:2012 LADDERS, VEHICLE-BOARDING
ASTM F 2919/F2919M : 2012 Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.<sup>2</sup> [3871 mm<sup>2</sup>] in Panels
CSA C22.2 No. 273 : 2014(R2019) CABLEBUS
ASTM F 987 : 2004 Standard Specification for Portable Intermediate Flush Deck Stanchion
ASTM F 986 : 1986 : R2008 Standard Specification for Suction Strainer Boxes
ASTM F 1267 : 2015-12 SPECIFICATION FOR METAL, EXPANDED, STEEL
ASTM A 741 : 2011 : R2016 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
NASA KSC STD Z 0004 : 2002 STRUCTURAL DESIGN, STANDARD FOR
ASTM F 986 : 1986 : R2014 Standard Specification for Suction Strainer Boxes
A-A-52505 Revision A:2011 RETAINER, BATTERY (METRIC)
ACI 439.4R : 2009 : R2017 REPORT ON STEEL REINFORCEMENT - MATERIAL PROPERTIES AND U.S. AVAILABILITY
AISC 360 : 2016 SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
MIL-DTL-45918 Revision A:2009 CLEVISES AND CONNECTORS (ROD END)
ASTM F 986 : 1986 : R1997 Standard Specification for Suction Strainer Boxes
NACE 80200 : 0 PREPARATION OF PROTECTIVE COATING SPECIFICATIONS FOR ATMOSPHERIC SERVICE
ASTM F 1019M : 2000 : R2012 Standard Specification for Steel Deck Gear Stowage Box [Metric]
CSA A440.4 : 2007 : R2016 WINDOW, DOOR, AND SKYLIGHT INSTALLATION
CSA A440.4 : 2007 WINDOW, DOOR, AND SKYLIGHT INSTALLATION
ASTM F 2548 : 2012 Standard Specification for Expanded Metal Fence Systems for Security Purposes
CSA S37 : 2013 ANTENNAS, TOWERS, AND ANTENNA-SUPPORTING STRUCTURES
API 537 : 2017 FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES
ACI 313 : 2016 DESIGN SPECIFICATION FOR CONCRETE SILOS AND STACKING TUBES FOR STORING GRANULAR MATERIALS AND COMMENTARY
IEEE C135.90-2014 IEEE Standard for Pole Line Hardware for Overhead Line Construction
CSA A370 : 2014 CONNECTORS FOR MASONRY
ANSI/ASSE Z359.18 : 2017 SAFETY REQUIREMENTS FOR ANCHORAGE CONNECTORS FOR ACTIVE FALL PROTECTION SYSTEMS
ASTM A 702 : 2013-11 SPECIFICATION FOR STEEL FENCE POSTS, HOT WROUGHT
ACI 301M : 2016 SPECIFICATIONS FOR STRUCTURAL CONCRETE
ASTM A 1075 : 2012 Standard Specification for Flanged Steel U-Channel Posts
ASCE 24 05 : 2006 FLOOD RESISTANT DESIGN AND CONSTRUCTION
IEEE 628-2011 IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations
MSS SP 58 : 2009 PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION
ISO 25457:2008 Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service
EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008)
MIL-PRF-32531 Base Document:2015 FLUORESCENT PENETRANT INSPECTION (FPI) UNITS, SEPARATE MODULAR STATION TYPES
ASTM F 1019M : 2000 : R2006 Standard Specification for Steel Deck Gear Stowage Box [Metric]
BS EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service
CSA A440 : 2017 NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS
ASTM F 986 : 1986 : R2004 Standard Specification for Suction Strainer Boxes
ASTM E 2112 : 2007 Standard Practice for Installation of Exterior Windows, Doors and Skylights
A500-16 Building guards
ASTM F 2780 : 2009 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers
ASTM A 1075 : 2012 : R2017 : EDT 1 Standard Specification for Flanged Steel U-Channel Posts
ASCE/SEI 48 11 : 2011 DESIGN OF STEEL TRANSMISSION POLE STRUCTURES
ONORM EN ISO 25457 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE

ASTM A 47/A47M : 1999 Standard Specification for Ferritic Malleable Iron Castings
ASTM D 7803 : 2012 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

View more information
£62.61
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.