• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM B 456 : 2017 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
Available format(s)

PDF

Language(s)

English

Published date

03-07-2017

CONTAINED IN VOL. 02.05, 2017 Defines requirements for several types and grades of electrodeposited copper plus nickel plus chromium or nickel plus chromium coatings on steel, nickel plus chromium coatings on copper and copper alloys, nickel plus chromium coatings on Type 300 and 400 series stainless steel and copper plus nickel plus chromium coatings on aluminum and its alloys and zinc alloys for applications where both appearance and protection of the basis metal against corrosion are important.

1.1This specification covers requirements for several types and grades of electrodeposited copper plus nickel plus chromium or nickel plus chromium coatings on steel, nickel plus chromium coatings on copper and copper alloys, nickel plus chromium coatings on Type 300 and 400 series stainless steel and copper plus nickel plus chromium coatings on aluminum and its alloys and zinc alloys for applications where both appearance and protection of the basis metal against corrosion are important. Five grades of coatings are provided to correspond with the service conditions under which each is expected to provide satisfactory performance: namely, extended very severe, very severe, severe, moderate, and mild. Definitions and typical examples of these service conditions are provided in Appendix X1.

1.2This specification does not cover the requirements for the plating on plastics, see Specification B604.

1.3The following hazards caveat pertains only to the test methods portions, Appendix X2, Appendix X3, Appendix X4, and Appendix X5 of this specification: This standard does not purport to address all of safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
B 08
DevelopmentNote
Supersedes ASTM B 141, ASTM B 142, ASTM B 375 and ASTM B 405 (01/2002) Supersedes ASTM A 166. (04/2002)
DocumentType
Redline
Pages
12
PublisherName
American Society for Testing and Materials
Status
Current

ASTM B 687 : 1999 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
MIL H 22577 : C HEATING ELEMENTS, ELECTRICAL, CARTRIDGE, SHIP AND TUBULAR TYPE
ASTM D 4099 : 1995 Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999)
ASTM E 2112 : 2007 : R2016 Standard Practice for Installation of Exterior Windows, Doors and Skylights
ASTM B 252 : 1992 : R2004 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
ASTM B 252 : 1992 : R2014 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
ASTM B 687 : 1999 : R2011 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
GG-S-1341 Revision A:1975 WASHER-STERILIZER, SURGICAL INSTRUMENT
MIL-STD-1516 Revision B:1990 UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL
ASTM B 252 : 1992 : R1998 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
ASTM F 737 : 1986 PERFORMANCE SPECIFICATION FOR ICE HOCKEY SKATE BLADES
ASTM B 252 : 1992 : R2009 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
SAE J 1648 : 2013 PROTECTIVE COATINGS FOR FASTENERS
ASTM B 687 : 1999 : R2016 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
ASTM F 1602 : 2012 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
ASTM E 2112 : 2007 Standard Practice for Installation of Exterior Windows, Doors and Skylights
I.S. EN ISO 10308:2006 METALLIC COATINGS - REVIEW OF POROSITY TESTS
ASTM F 1603 : 2017 : REDLINE Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
MIL E 917 : E ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE)
ASTM B 490 : 2009 : R2014 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
ASTM B 380 : 1997 : R2008 : EDT 1 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
SAE J 1837 : 2017 ELECTROPLATE REQUIREMENTS FOR DECORATIVE CHROMIUM DEPOSITS ON ZINC BASE MATERIALS USED FOR EXTERIOR ORNAMENTATION
ASTM B 764 : 2004 : R2014 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
ASTM B 490 : 2009 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits
ASTM D 4973 : 1993 Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999)
MIL-W-40145 Revision C:1991 WRENCH, CROWFOOT, SPECIAL
GG-S-1340 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
ASTM B 368 : 2009 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
MIL-G-45811 Revision D:1992 GAGE, AIR, LOW PRESSURE, PNEUMATIC FLOATING EQUIPMENT
CSA A440.4 : 2007 : R2016 WINDOW, DOOR, AND SKYLIGHT INSTALLATION
CSA A440.4 : 2007 WINDOW, DOOR, AND SKYLIGHT INSTALLATION
ASTM B 380 : 1997 : R2007 Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
ASTM B 380 : 1997 : R2002 Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
ASTM E 737 : 1984 : EDT 1 Practice for Installation of Storm Windows, Replacement Windows, Multi-Glazing, Storm Doors, and Replacement Doors (Withdrawn 1993)
ASTM F 1602 : 2012 : R2017 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
EN ISO 10308:2006 Metallic coatings - Review of porosity tests (ISO 10308:2006)
SAE J 447 : 2016 PREVENTION OF CORROSION OF MOTOR VEHICLE BODY AND CHASSIS COMPONENTS
ASTM B 764 : 2004 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
CSA B125 : 2001 PLUMBING FITTINGS
GG-S-1343 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
ASTM B 764 : 2004 : R2009 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
CSA A440 : 2017 NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS
ASTM B 380 : 1997 : R2013 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
ASTM B 368 : 2009 : R2014 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM B 687 : 1999 : R2005 : EDT 1 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
DIN EN ISO 10308:2006-04 METALLIC COATINGS - REVIEW OF POROSITY TESTS
BS EN ISO 10308:2006 Metallic coatings. Review of porosity tests
ISO 10308:2006 Metallic coatings Review of porosity tests

ASTM B 380 : 1997 : R2007 Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
ASTM E 50 : 2017 : REDLINE Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM G 85 : 2011 : REDLINE Standard Practice for Modified Salt Spray (Fog) Testing
ISO 1456:2009 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
ASTM B 320 : 1960 : R2019 Standard Practice for Preparation of Iron Castings for Electroplating
ASTM B 489 : 1985 : R2018 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals

View more information
£69.29
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.